Captivate project not running properly on iPad
Hello,
I built a project using Captivate 7.0. When I published the project, I checked both the SWF and HTML5 boxes so the tutorial would run on an iPad. However, when I view the tutorial on the iPad, the tutorial does not run properly. The pages do not advance (even though, in Captivate, I have the slides advancing automatically - not on mouse clicks), all of the bullets on a slide do not appear, and the narration stops in the middle of a slide and does not resume.
Do you have any suggestions?
Thank you,
Sarah
Hi Joel,
I removed all bullet animations and re-published the project (I checked the "Force re-publish all the slides"). My tutorial runs on an iPad, without the slides hanging up. It appears removing the bullet annimations solved that issue. Thanks for the suggestion.
However, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up. Also, I confirmed the sound works by running the tutorial on my desktop.
Do you have any ideas?
Thanks,
Sarah
Similar Messages
-
FOR ALL ENTRIES stmnt. in SELECT query is not running properly
Hello experts,
In my report program, I write one query on table BSIS.
Internal table declaration -
DATA : BEGIN OF DLC_BSIS OCCURS 0,
BUKRS LIKE BSIS-BUKRS,
GJAHR LIKE BSIS-GJAHR,
BELNR LIKE BSIS-BELNR,
SHKZG LIKE BSIS-SHKZG,
BSCHL LIKE BSIS-BSCHL,
AUFNR LIKE BSIS-AUFNR,
HKONT LIKE BSIS-HKONT,
QSSKZ LIKE BSIS-QSSKZ,
DMBTR LIKE BSIS-DMBTR,
END OF DLC_BSIS.
Query as follows --
SELECT BUKRS
GJAHR
BELNR
AHKZG
BSCHL
AUFNR
HKONT
QSSKZ
DMBTR FROM BSIS
INTO TABLE DLC_BSIS
FOR ALL ENTRIES IN IT_BKPF2
WHERE BELNR = IT_BKPF2-BELNR
AND BUKRS = IT_BKPF2-BUKRS
AND GJAHR = IT_BKPF2-GJAHR.
IT_BKPF2 internal table having -- BUKRS - LT01
BELNR - 6400000061
GJAHR - 2009.
And in BSIS database table -- 3 entries are there for the above documnet.
But, in my internal only one entry has come for the same above document.
I think For all entries stmnt. is not running properly. But Why it's not running properly.??
What would be the reason..??
Thanks in advance....!!
Regards,
Poonam.>
Poonam Patil wrote:
> Hello experts,
> In my report program, I write one query on table BSIS.
>
> Internal table declaration -
>
> DATA : BEGIN OF DLC_BSIS OCCURS 0,
> BUKRS LIKE BSIS-BUKRS,
> GJAHR LIKE BSIS-GJAHR,
> BELNR LIKE BSIS-BELNR,
> SHKZG LIKE BSIS-SHKZG,
> BSCHL LIKE BSIS-BSCHL,
> AUFNR LIKE BSIS-AUFNR,
> HKONT LIKE BSIS-HKONT,
> QSSKZ LIKE BSIS-QSSKZ,
> DMBTR LIKE BSIS-DMBTR,
> END OF DLC_BSIS.
>
> Query as follows --
>
> SELECT BUKRS
> GJAHR
> BELNR
> AHKZG
> BSCHL
> AUFNR
> HKONT
> QSSKZ
> DMBTR FROM BSIS
> INTO TABLE DLC_BSIS
> FOR ALL ENTRIES IN IT_BKPF2
> WHERE BELNR = IT_BKPF2-BELNR
> AND BUKRS = IT_BKPF2-BUKRS
> AND GJAHR = IT_BKPF2-GJAHR.
>
> IT_BKPF2 internal table having -- BUKRS - LT01
> BELNR - 6400000061
> GJAHR - 2009.
>
> And in BSIS database table -- 3 entries are there for the above documnet.
>
> But, in my internal only one entry has come for the same above document.
>
> I think For all entries stmnt. is not running properly. But Why it's not running properly.??
> What would be the reason..??
>
>
> Thanks in advance....!!
>
> Regards,
> Poonam.
include the buzei field in selection criteria i have faced the same situation earlier.
always select all the key fields.
varun -
I just purchased a 24 inch Imac and Gimp will not run properly. I have the latest system updates and firmware. Gimp starts X11 and appears to load, but the only item visible is the Gimp menu, none of the tools. It shows as running in the dock.
If I try to open a graphic with Gimp, it loads but the graphic is not visible and only the Gimp menu is visible in the menu bar. It shows up as running in the dock.
It works fine on a G4 quicksilver. I have the latest version 2.2.11
Thanks,
Fran
IMAG INTEL Mac OS X (10.4)Hello Francis,
Did Gimp ever load properly? On first load, it should have gone through an installer within X11. Also, I've noticed that my image windows start up hidden. There also may be a bug in which clicking on the Gimp app icon in the dock itself won't bring the windows forward, so you have to use the X11 icon instead. Try using Expose to show all windows in all applications to see if they've opened but sort of "off-screen."
It could be a bad installation, or it could be that somehow the toolbars and palettes, etc. in Gimp just never appeared. Check to make sure X11 is up to date as well. I'm currently running 1.1.3 with XFree86 4.4.0. -
I have a copy of Web Premium CS3 which was installed on a Windows Vista PC. I have a new Windows 7 PC and the installation disc will not run properly. The installation begins and then asks for the CS3 disc to be inserted. If I re-insert the CD I just get a message asking for the disc to be inserted. any ideas anyone?
Use the download version:
Download CS3 products
Mylenium -
Hi Apple Team,
Sharepoint 2010 windows authendication(NTLM) is not working properly in IPad safari browser. When I enter the user name and password the page is keep on loading it never completes the page load. I installed chrome browser on my Ipad and opened my sharepoint windows authentication site it is working fine.
Device : IPad 2
OS : IOS 7.0.6
Thanks,
BaskarHi Suhasini,
Please refer below links for your issues. It seems you are having problem with 32 bit and 64 bit component in office and IE.
http://howididit-sharepoint.blogspot.in/2012/04/datasheet-view-not-working.html
http://alpesh.nakars.com/blog/datasheet-view-does-not-work-in-sharepoint-2010/http://support.microsoft.com/kb/2266203
Thanks and Regards, Shailesh B. Davara -
Vz protect not running properly
I have the latest version, but it is not running properly (just keeps scanning).
How can I fix this? Should I uninstall and then reinstall? Is there a charge to do that?hello lhill123, maybe that's an issue with hardware acceleration - first please try [[Upgrade your graphics drivers to use hardware acceleration and WebGL|updating your graphics driver]], or in case this doesn't solve the issue or there is no new version available at the moment, start firefox into safemode '''by pressing the shift key while the application is launching''' & disable hardware acceleration in the firefox ''menu ≡ > options > advanced > general'' (that setting will take a restart of the browser to take effect).
[[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] -
I have bought a iPhone 4 , yesterday . I heard that iOS 7 is not running properly on iPhone 4 , so I have decided to upgrade it to 6.1.2 . Please help to do this.
YOU CAN'T.
If you upgrade your phone you can only upgrade to iOS 7 and that is it. You can only ever update to the lastest available software, which in this case is iOS 7. You either upgrade to this or not at all because you can't upgrade to anything else. -
I defined custom action but it is not running properly.
Hi,
I defined custom action but it is not running properly.
I deployed in MII (System Management --> Custom Actions)
When i use it as an action in a transaction error below generated.
Errors
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
[ERROR]: STEP EXCEPTION (Custom_Action_0) : Item 'Custom_Action_0' is not an Action
Custom action code is below.
package com.wipro.action;
import com.sap.xmii.xacute.actions.ActionReflectionBase;
import com.sap.xmii.xacute.core.ILog;
import com.sap.xmii.xacute.core.Transaction;
@author cemil.bozlagan
public class CustomAction extends ActionReflectionBase {
private String strFirstInput;
private String strSecondInput;
private String strOutString;
public CustomAction() {
strFirstInput = "";
strSecondInput = "";
strOutString = "";
@Override
public String GetIconPath() {
return "/com/wipro/action/resources/icons/CustomAction.png";
@Override
public void Invoke(Transaction trx, ILog ilog) {
try {
strOutString = strFirstInput + strSecondInput;
// This varaible is defined in ActionReflectionBase class
_success = true;
} catch (Exception e) {
_success = false;
public String getFirstInput() {
return strFirstInput;
public void setFirstInput(String strFirstInput) {
this.strFirstInput = strFirstInput;
public String getSecondInput() {
return strSecondInput;
public void setSecondInput(String strSecondInput) {
this.strSecondInput = strSecondInput;
public String getOutString() {
return strOutString;
@Override
public boolean isConfigurable() {
return false;
How can i solve this problem?
Thanks.Hi Cemil,
Pls check document, I hv sent to your mail.
May be it helps.
Regards
Padma -
Javascript does not run properly in Firefox
Firefox does not run javascript properly.
For example:
http://vk.com/app2622342_40916334#NEW/comp1427
Comment form does not run at all in Firefox ( the last version = 20.0.1)
but runs OK in Opera.
WHY?
Mozilla still is HALF-DONE SOFTWARE!!!!!!!
WHEN YOU DO IT IN A GOOD WAY?I have javazcript-enabled = TRUE in my about:config. So your comment did not solve my problem. I noticed that javascript does not run properly in some websites (forms in vk.com) but those forms run OK in OPERA - how can you explain this!?
And I have no errors in the Web Console (Firefox/Tools > Web Developer).
I wrote you a link to the page where javascript does not work.
( you need to login to vk.com to see that page
http://vk.com/app2622342_40916334#NEW/comp1427
) -
After updating to Lion (10.7.2), "Mail" will not run properly. For each of my accounts, either the incoming or outgoing servers go offline, and while I can access incoming mail (sometimes), outgoing is impossible. I have deleted and reinstalled all of my accounts. Doesn't help.
Anyone else having issues?WHOA!!!!! meant to say "After installing LION...."!!!
Sorry..... -
Revision: 13744
Revision: 13744
Author: [email protected]
Date: 2010-01-25 01:14:09 -0800 (Mon, 25 Jan 2010)
Log Message:
Bug: BLZ-481 - AMFConnection JUnit test do not run properly as part of checkintests on Mac (and Windows?)
QA: No
Doc: No
Checkintests: Pass
Details:
-Don't start the server before unit task, unit task already checks if the server is not running and starts the server.
-Don't stop the server after FlexUnit tests, JUnit tests need the server running, and they will stop the server after they are done.
Ticket Links:
http://bugs.adobe.com/jira/browse/BLZ-481
Modified Paths:
blazeds/trunk/build.xml
blazeds/trunk/qa/apps/qa-regress/testsuites/flexunit/build.xmlTony,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Do a search of our knowledgebase at http://support.novell.com/search/kb_index.jsp
- Check all of the other support tools and options available at
http://support.novell.com.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://support.novell.com/forums)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/ -
Flash swf not running properly in captivate
Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
MaedhbhSee http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.
-
Flash cs5 swf not running properly in captivate 5
Hi,
I'm not sure if this is a flash question or a captivate question so I'm posting it to both forums. I have numerous flash cs5 built swfs inserted into a captivate 5 project. All of them are running fine apart from this one. It runs perfectly outside of captivate but within the captivate swf it goes haywire. It's a very simple fla. The only actionscript involved is a stop action. There is a movie clip that uses a number of classic tweens and then there is a layer containing textual explanations for what's happening in the movie clip. When I run my captivate project the swf does one or other of the following:
a) it runs but the movie clip starts earlier than the text and so they are out of synch
b) the text runs as normal but the movie clip does not run at all
c) it only shows the final frame of the swf and nothing else happens.
As I say, it is a very simple fla and I'm at my wits end trying to figure out what's wrong. I don't seem to be able to attach the fla here, so if anybody thinks they may be able to help please pm me with your email address and I will email you the fla file.
Just to note some of the things I have already considered: the text is all set to classic rather than TLF. The captivate project and the fla both publish as3 at 12fps for flash player 9.
yours hopefully!
MaedhbhSee http://forums.adobe.com/message/3327323. I am having the same problem and this may help you out.
-
Captivate narration not coming through on iPad
Hello,
I created a Captivate project in Captivate 7.0. My project includes a music introduction (MP3 file) on the first slide and narration on the subsequent slides. On my desktop, the project and sound (music and narration) runs properly. However, on my iPad, neither my music introduction on the first slide nor my narration on subsequent slides comes in. I confirmed I do not have "mute" on and that my volume is up.
Do you have any ideas?
Thanks,
SarahHi Sarah
Are you running on iOS 7 ? if not can you share the project with me for investigation . You can send it through dropbox / yousend it to my email - [email protected]
Regards
Suresh j
Captivate Engineering -
Play/Pause Button Captivate 3 not working properly
I am using Captivate 3, but my play/pause button is not working properly. I can publish and upload to my LMS, but when I click the pause button the first time the mode changes but the project keeps playing. I have to click two more times and then it works. Can anyone offer any assistance? Thanks so much!
Hello @Unit_27 ,
Welcome to the HP Forums!
Thank you for the information about your keyboard! I'll see what I can do to help
I think it would be a good idea to take apart the keyboard, or some of it, to determine if the keys are obstructed somehow. Some information on the supported method of cleaning the keyboard is mentioned in this document: Cleaning your Notebook PC
If this does not resolve the issue, I would reinstall Windows on the computer. The issue at this point would be software related, to some unknown extent. A recovery will address any software issue. First, make sure you backup everything you need to. Here is some information on how to do this: Backing Up Your Files
Once this is done, it is safe to reinstall the computer. Here is some additional information on how to do this properly: Performing an HP System Recovery
Please let me know if you have any other questions. Thanks and have a great day!
Mario
I worked on behalf of HP.
Maybe you are looking for
-
External Hard drive not backed up on Time Machine
One of my Seagate external hard drives has failed. I thought that the Time Machine was backing up its contents onto my other external hard drive - I set it to back up everything including the external HD. However I've looked into the Time Machine & g
-
Hi, I have a requirement as following. I have one date 'planned completion date' and that this is getting populated from source sytem and is part of transaction data. I have one more date which 'report run date' with this i will do 'planned completio
-
Single project in multiple blue folders?
Hi, Is it possible for a project to exist in more than one folder? I have a large number of projects that I need to process in lots of different blue folders, and would like to work out a way that I can have each project in its proper blue folder and
-
I have been using CS3 for years, with my faithfull canon 5600F used the import twain feature worked great, installed leopard 10.6.7: now my twain plug in does not show in the import menu: I read through many forums & posts: can't find a solution. I d
-
Hello, I am trying to upgrade iTunes to 10.5.3, and have been receiving the error message: The installer could not validate the contents of the 'AppleMobileDeviceSupport' package. Contact the software manufacturer for assistance. Anyone had this prob