Captivate Quiz not sending back input

I have created a captivate movie that has one question that
is essay format. it is emailing when a person uses the movie, but
not sending me the information they are putting in the essay box.
how can i make the movie send back the users answer?

Did you export this as standalone or swf? Standalone (.exe)
does not seem to email results once complete. Try exporting as swf
to see if you get better results.

Similar Messages

Captivate 5 - Not sending LMS Finish

All-
I need your help to solve a frustrating problem. I have been using Captivate for several years, and recently started using Captivate 5. The courses I designed in the past were hosted on an LMS that was not SCORM compliant or even conformant. We are transitioning to Element K which professes to be SCORM compliant. I started by taking the courses which were built for the old LMS and turned on reporting. I have made several test files with different settings, however, I see my problem in every case.
Here are the settings from my most recent upload:
Reporting enabled
SCORM 1.2
Template: Send tracking data at end
Manifest: Mastery Score set to 90%
Report Status: Complete/Incomplete
Report to LMS as Percent
Report Data: Quiz Results Only
Reporting level: Interactions and Score
LMS Customization Settings: checked - Never Send Resume Data; checked - Escape Version and Session ID (<--- What exactly does this do and why/why not check it)
Project End options: Close Project
If passing grade: Continue
If failing grade: Infinite atttempts, show retake button
My problems are as follows:
Element K launches the course in a new window. Upon successful completion of the course (passing grade of 90% or better), the results page offers the "Continue" button. When the "Continue" button is pressed, the slide progresses to the next slide which instructs the user to close the window. When the window is closed, it appears that Captivate does not send an LMS Finish command to the LMS, so the course is not marked as complete. I used the ADL's "Test Suite" on the course and it failed because the course did not send an LMS Finish Command, however, I found that tool hard to use and sometimes I couldn't get the course to load at all. Probably my newbie fault, but I don't know.
Is there something I need to set in Captivate to make it send the LMS Finish?
Should I remove that last slide that clicking the "Continue" button takes you too? I put in in there becuse clicking "Continue" on the Quiz results page does nothing at all (at least on the front end).
Does the "Close Project" option under Project End Options send the LMS Finish command? Should that be set to something else?
Does the user have to click the "Continue" button on the Quiz results page to send the LMS Finish command?
One one of my previous test courses, I unchecked "Never send Resume Data" as I wanted the user to be able to return to the course where they left off. This worked fine until they completed the course (but was not marked as complete in the LMS due to the above problem); when they returned to the course again, they were sent to the last slide of the course (the one that tells them to close the window). Will this always happen or will the bookmark "reset" once the course is shown as completed in the LMS?
I am new to SCORM and what little I know has been learned by reading on the web/forums while searching for solutions to this problem. Any suggestions, hints, tips or tricks with regards to SCORM and Captivate 5 and/or Element K would be appreciated. I have exhausted the forums and even tried scanning some resource books to try and understand the settings within Captivate in regards to what they do and how it effects the course.
Thanks in advance!
Katherine

HI
I've learned that using the "Close Project" option is the best one. Make sure that the "result"slide offers the last button available for the user. The one that shows up as deafult, marked "Continue", is the one I use to end the course. Rename it "Close & Save". By doing this the course closes and the SCORM results are sent to the LMS.
What I've noticed is that not all previous releases of browsers does this very well. 6 months ago, I couldn't make Safari, Opera, Chrome or FF work. But recent updates have fixed this. Today, Opera is the only one with an issue, it works,but very very slowly.
Hope this helps:)
BK

Adobe captivate data not sending at the end of webinar. Is the adobe server still down?

Adobe captivate data not sending at the end of webinar. Reads "unknown error." Is the adobe server still down? This has been ongoing all of july 2014.

So the engineer came and, of course, everything was working ok. He did fit some kind of RF filter on my main socket, and 'changed the pair' on one of the outside cables. Since then, I've only had a noisy line once, and seem to have been connected for 3 days solid, which is a record!
I've switched back to my BT Home hub 3, which guavas me more stats. The line has previously given me up to 6mb/s, now only getting 1.6.
Do you think, now the line seems more stable, with the stats below I should be able to maintain a higher speed now?
Thanks
Line state: Connected
Connection time: 3 days, 02:19:39
Downstream: 1.601 Mbps
Upstream: 444.9 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.3 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 17.7 dB / 22.6 dB
Line attenuation (Down/Up): 44.8 dB / 27.0 dB
Output power (Down/Up): 18.6 dBm / 12.6 dBm
FEC Events (Down/Up): 3144673 / 0
CRC Events (Down/Up): 14434 / 38
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 111873 / 10
Error Seconds (Local/Remote): 1011 / 4

Safari 3.2.1 on Mac 10.5.6 accept cookie, but NOT send back to bonjour URL

See the detail log on this thread.
http://discussions.apple.com/thread.jspa?threadID=1929198&tstart=0
The web server's hostname is, for example, FC9Linux. It has a bonjour broadcast for its web.
In Safar->Bookmarks->Show all bookmarks, open "bonjour".
It will list all http server discoved throught bonjour. Click the item 'FC9Linux', it will use the URL 'http://FC9Linux.local./' to visit the web server. Then the cookie issue discribed in thread bellow happens.
Safari can accept the cookie, but will not send back to the web server in its http header. Then Safari can not login with the URL like 'http://FC9Linux.local./'. Safari can login with the URL 'http://FC9Linux.local/'(remove the tailing dot) or 'http://10.32.100.23'(ip address), the cookie works.
some others also has this issue.

Hello,
"I have trolled all the sites for safari problems on 10.4.11 and tried some of the things indicated"
Before we make suggestions, what exactly have you tried so far?
Carolyn

Captivate 4 not detecting audio input from USB Microphone

I'm using a Logitech USB microphone in Captivate 4. When I try to calibrate it, Captivate 4 is not detecting any sound. It is set up properly. In the "audio settings" menu, this microphone is listed in the drop down list. I have selected it as the input device. However, when I try to "calibrate" this microphone, no audio is detectable. Captivate 4 is detecting the device, but not the audio input. I have double checked all the usual suspects--this microphone is selected as the default recording device. It does not use special software or drivers. It is designed to use the drivers in Vista. It works fine with other applications. I have made sure the input level is detectable. I've checked to make sure it is not muted. I have other microphones (non-USB cheapies) that work fine, but I can't get this specific USB microphone to work.
Suggestions?

Hi there
Have you tried what is on the page linked below?
Click here to visit the page
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

CS6 Captivate Quiz not recording Quiz to SuccessFactor Plateau LMS

I've created a simple quiz in CS6 Captivate and it works on scorm.com. Why does this simple quiz not work on Plateau? Which is identified as a LMS supported in Adobe's Authoring tools.

Can you add some more inforamtion around your project.
Share us the Screen shot of Quiz Preferences-- Reporting Menu.
Was the project checked in the same way on both LMS?
The LMS Team sould have adetailed log to decipher what could be causing the problem.
Thanks,
Anjaneai

Firefox is not sending file inputs through iframe

i know this ain't a programming forum, but i'm having problems with firefox while trying to send file inputs through iframes.
this is my code
<pre><nowiki><form id="popup_form_archivo" method="post" action="'subir_imagen.php" target="wk_iframe" enctype="multipart/form-data">
<input name="accion" value="subirImagen" type="hidden" />
<input name="wkimg" type="file" id="popup_prompt_archivo" />
</form>
<iframe name="wk_iframe" id="wk_iframe" src="about:blank"></iframe></nowiki></pre>
i send the form inputs to the iframe called wk_iframe, i get the data from the hidden input but not the file input..
I dont know why is this happening?, because it used to work.
Works good in safarin, Opera, Chrome, But not with Firefox
I must say i love firefox and that's what i'm here..
Please help me..

I notice a single quote in action="'subir_imagen.php". Is that quote necessary?
*https://developer.mozilla.org/en-US/docs/Web/HTML/Element/form
*https://developer.mozilla.org/en-US/docs/Web/HTML/Element/button
This should still be working as the docs indicate.
Any errors showing in the Web Console (Firefox/Tools > Web Developer;Ctrl+Shift+K) or Browser Console?
A good place to ask advice about web development is at the mozillaZine "Web Development/Standards Evangelism" forum.
*http://forums.mozillazine.org/viewforum.php?f=25
The helpers at that forum are more knowledgeable about web development issues.<br>
You need to register at the mozillaZine forum site in order to post at that forum.

Captivate 3 not sending correct completion information

Hi all, we are using Captivate 3, and are in the process of uploading our content to Element K's LMS. We have tested some of the content, and its marking courses complete even though the completion criteria have not been met. We have run through the content and achieved a failing grade, but the status changes to complete.
Here is how we have set up our courses:
In the Reporting Options, we have set Complete/Incomplete under Report Pass or Fail (Element K tells us they need this setting), Quiz Results only under Choose Report Data, Percent under Report Score to LMS as. We have selected Never Send Resume Data under LMS Customization Settings. In Pass or Fail options, we have 80 % or more of points to pass, and If failing grade Allow user Infinite attempts. We are publishing as SCORM 1.2 (required by Element K).
Can anyone shed some light on this? Should a Captivate course send "completed" to the LMS on a failed assessment? Help! We are under very tight deadlines, so anything anyone can suggest would be appreciated!
Thanks,
Diane

I've not lookede through the previous thread, but you've done variations on the settings?
You have tried Pass/Fail instead of Complete/Incomplete? Generally, if you want a score to show, you need to use Pass/Fail. That's not always true, but a score is generally not associated with Complete/Incomplete in SCORM 1.2 (in my understanding).
Have you tried the lesson through any test suite outside the LMS itself? That'd be my next step. The ADL Test Suite is the 'offical' tool for such testing but isn't very user friendly. Otherwise I'd suggest Rustici's Test Track
http://www.scorm.com/scorm-solved/test-track/
or the Reload Editor (which I've not used and am not 100% sure is for SCORM validation)
http://www.reload.ac.uk
Run the lesson through some SCORM tester and see if the values passed are what you expect. If not, change the settings, publish, and test again. A lot more efficient, hopefully, than going through the LMS itself and allows you to possibly determine an LMS issue over a lesson issue.
HTH
Erik

Captivate Quiz Not Reporting Correctly in LMS

I am using Captivate 5.0 to publish a project to an EKP LMS. I am able to get the file to show complete in the LMS, but the quiz is not reporting correctly. Instead of a percentage it is reporting the number of points earned. Is there any way to have a percentage reported instead? I would appreciate any suggestions. Grace

Hi Grace,
Can you check the Highlighted part and reset your Radio button to 'Percentage'--
Thanks,
Anjaneai

Color not sending back all the video lines.

I am working on a color project that is pretty in depth. I finished rendering all the clips but when I send it back to final cut it only send v2 and v3. V1 just comes back unrendered and uncorrected. I hope I am clear enough. any help would be great.

On the COLOR timeline, what is the range of clip numbers on V1?
What is the range of clip numbers on V2/V3?
Can you search for .movs that correspond to these clip ranges, specifically, media with names like 1_g1.mov, etc. If the media is being rendered, you will find it this way, and lets go from there.
jPo

Captivate 4 not registering key input when recording a Virtual PC

I run Windows 7 64 bit with Windows Virtual PC running. I am trying to capture a session using a Windows 7 PC emulated machine, but as soon as I start recording and click inside the Virtual PC window, Captivate 4 no longer register any mouse or keyboard click I make.
The odd thing, my Colleage is able to make the exact same thing work on his machine, also running Windows 7 64-bit. But for some reason I cannot. What good suggestions are there to allow Captivate 4 to "see" keystrokes when running a Windows Virtual PC?

Hi there
Have you tried what is on the page linked below?
Click here to visit the page
Cheers... Rick
Click here for Adobe Authorized Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks

Captivate 5 not Reporting Quiz scores correctly in LMS

Our organization is transitioning to Captivate 5 from Captivate 4. We are using SumTotal as our LMS. I took a CP4 project and converted to CP5, then uploaded it as a test. The results were dismaying.
Captivate 5 Scorm 1.2 apprears to send scores to the LMS instead of scaled scores. For example; If you have 20 questions the scaled score should always be 0 to 100.
In the example I converted from Captivate 4, I have 15 quiz questions. In my first try I scored 60% on the Quiz. Captivate reported to the LMS a percentage complete of 0 and a score of 90%. In my second attempt I scored 80% (which is required for passing from within the Quiz setup) and Captivate reported to the LMS 100% complete and a score of 100%.
I repeat, all worked fine with the same course published as Captivate 4.
I work for a very large multinational company. This is a killer for us if we want to go forward with Captive 5. In fact, I have just spent a lot of money upgrading everyone in my department - money wasted if we can't use the output with our LMS.
Does anyone have any ideas, and is there a way to get to someone at Adobe if this forum is unable to provide answers?
Sorry to sound panicked, but I guess I am.
Frank

Hi all
You're absolutely right. Adobe silence is extremely unsatisfactory and unprofessional. Below are the email correspondences. Does anyone know who are the President or the CEO and the email address? I think it’s about time to find out why from the top man himself.
Best regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Tuesday, 21 September, 2010 12:00 AM
To: '[email protected]'
Subject: FW: Quizzing related forum posts?????
Importance: High
Hi Vish
Please furnish me with your updates immediately.
Best regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Sunday, 12 September, 2010 8:18 PM
To: '[email protected]'
Subject: FW: Quizzing related forum posts
Hi Vish
Any updates? My timeline is behind schedule.
Thanks & regards... Flavian
From: Flavian Lim [mailto:[email protected]]
Sent: Friday, 10 September, 2010 1:24 AM
To: 'Shivaswamy Viswanath'
Subject: RE: Quizzing related forum posts
Hi Vish
Thanks for following up the issues. Attached, please find the files requested.
Hope it helps.
Best regards... Flavian
From: Shivaswamy Viswanath [mailto:[email protected]]
Sent: Thursday, 9 September, 2010 11:35 AM
To: [email protected]
Subject: RE: Quizzing related forum posts
Hello Flavian,
Can you share the cptx file with us?
Thanks,
Vish
From: Flavian [mailto:[email protected]]
Sent: Wednesday, September 08, 2010 10:17 PM
To: Shivaswamy Viswanath
Subject: Re: Quizzing related forum posts
Hi Vish
Yes, they are all checked.
Please revert soonest.
Thanks... Flavian
Sent from my BlackBerry Wireless Handheld
From: Shivaswamy Viswanath <[email protected]>
Date: Wed, 8 Sep 2010 15:48:38 +0530
To: [email protected]<[email protected]>
Subject: RE: Quizzing related forum posts
Hello Flavian,
Looks like the interaction data for the question is not captured. Can you please check whether ‘Report Answer’ option is checked in ‘REPORTING’ accordion of Quiz PI for all question slides? If not, can please enable this option and check it out?
Thanks,
Vish
From: Flavian Lim [mailto:[email protected]]
Sent: Wednesday, September 08, 2010 2:17 PM
To: Shivaswamy Viswanath
Subject: RE: Quizzing related forum posts
Hi Vish
Attached, please find a copy of the student record file as requested.
Thanks & regards... Flavian
From: Shivaswamy Viswanath [mailto:[email protected]]
Sent: Wednesday, 8 September, 2010 2:50 PM
To: [email protected]
Cc: Suresh Jayaraman
Subject: RE: Quizzing related forum posts
Hello Flavian,
Thanks for the reply. Regarding the thread Captivate 5 not Reporting Quiz scores correctly in LMS we would like to investigate further. Can you share those XML files with us? It can be found in Wamp Server, captivate results folder. Can you please zip it and send it to us?
Thanks,
Vish
From: Flavian [mailto:[email protected]]
Sent: Sunday, September 05, 2010 1:31 PM
To: Shivaswamy Viswanath
Subject: Re: Quizzing related forum posts
Hi Vish
The configuration is exactly as described in the Adobe help. Both the quiz and Wampserver is on the same machine. The rest is as per stated on the forum thread.
By looking at the results of the Cp5 Quiz Results Analyzer, does it make any sense? The statistics doesn't fit in at all.
Appreciate your interest in this issue. Hope we can work towards resolving this issue.
Best regards... Flavian
Sent from my BlackBerry Wireless Handheld
From: Shivaswamy Viswanath <[email protected]>
Date: Sun, 5 Sep 2010 11:39:40 +0530
To: [email protected]<[email protected]>
Cc: Suresh Jayaraman<[email protected]>
Subject: Quizzing related forum posts
Hello There,
This is Vish from Adobe Captivate Team at Adobe. I have observed multiple threads from you on the issues you are facing with Quizzing feature. I thought of mailing you to know the issues you are facing so that I could look at them. Can you please mail me those issues and if possible few sample files too?
Thanks,
Vish

Adobe Captivate Quiz Analyzer not reporting

When I login to Captivate Quiz Analyzer the Course selection shows what appears to be a course code and the student name and I can not generate a report. Please see the screen shot attached. Any Help? Thank you!

Please see the answers to your question in red below.
Thank you,
John P Dietz | Supervisor, Education Services | Digital Printing Solutions
| Graphic Communications Group |
Eastman Kodak Company | 3000 Research Blvd | Dayton, OH 45420 |
[email protected] | 937.259.3406 Office | 937.781.8406 Fax |
www.kodak.com
The information contained in this e-mail is confidential. It is intended
only for the use of the named recipient(s). If you have received this
e-mail in error, please immediately inform the sender and delete the
message. If the reader of this message is not the intended recipient, you
are hereby notified that any dissemination, distribution, or copying of
this communication is strictly prohibited.
From:
Himanshu satija <[email protected]>
To:
jpdietz <[email protected]>
Date:
02/25/2014 11:34 AM
Subject:
Adobe Captivate Quiz Analyzer not reporting
Re: Adobe Captivate Quiz Analyzer not reporting
created by Himanshu satija in Adobe Captivate - View the full discussion
Hello,
Can you tell me the version of Adobe Captivate quiz result analyzer you
are using ? 1.5
Can you tell me the version of Adobe Captivate from which the course was
published ? 5.6.3.631
What happens when you click on Generate Report ? I get the error "No
results available for this course."
Thanks and Regards
Himanshu satija
Please note that the Adobe Forums do not accept email attachments. If you
want to embed a screen image in your message please visit the thread in
the forum to embed the image at
http://forums.adobe.com/message/6155573#6155573
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page: [
http://forums.adobe.com/message/6155573#6155573]
To unsubscribe from this thread, please visit the message page at [
http://forums.adobe.com/message/6155573#6155573]. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Captivate at Adobe Community
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/thread/416458?tstart=0.

I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back?

I have another apple ID but I forgot the password and apple does not send the link to reset it to my email. What do I do to have it back? It is really important.

If you know the answers to your security question for the ID you can use that method to reset the password rather than email (by going to https://iforgot.apple.com/password/verify/appleid).
If you don't, you'll have to contact iTunes Store support for assistance: http://www.apple.com/emea/support/itunes/contact.html. They frequently deal with Apple ID issues.

HT4910 my iphone periodically sends me a message saying my phone has not been backed up to icloud for x amount of weeks..it tells me that when i plug in my phone to an internet connection or device it should 'back it up'.it doesnt. any help/ideas??

periodically my iphone sends me a message saying that it has not been backed up to icloud for x number of weeks.it tells me that when an internet connection is connected to should back-up..i have connected it many times and still get the same message every other week..any help/suggestions would be great..is it an app that i need to get?if it is,i dont have it and a suggestion would be great..thnx

Welcome to the Apple Community.
Try restarting the phone and trying again.
If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.

Captivate Quiz not sending back input

Similar Messages

Maybe you are looking for