Captivate to MX 2004 to Flash 8
I wasn't sure if this needed to be in the Import, Export, or
Record section.
I have created a captivate project that I ultimately want to
embed in my wordpress blog using the Flash 8 Clear External Skin
(Controller).
I have exported the Captivate Movie to Flash MX 2004
I saved the Flash MX 2004 (.fla) file
When Flash MX opened I "Imported to Stage" the Captivate file
(I've also tried import to library but that didn't work either)
From this point on is were I get stuck... I have tried: "Save
As" "Exporting" etc. from Flash MX 2004.
So that I can import the movie into Flash so that I can then
post the movie to my blog.
I hope that that was clear enough... Please help. >>B.
Val<<
The mistake you made was an early one - when you decided to
bring your Captivate project into Flash and publish from there.
There are many issues with doing that ... for a
Tech
Note defining many of them, click this link
The bottom line is that many Flash users expect that
Captivate will integrate seamlessly with Flash, and it just isn't
so. To understand, remember that Captivate was purchased by
Macromedia with the buyout of eHelp, and the former "RoboDemo" was
put together as a ""first effort" by the Flash family . . . which
was then purchased (very soon thereafter) by Adobe. So Captivate is
really a "version 1.0" effort. Look for better integration with
Flash in the future, perhaps, but right now it is just
not recommended.
You might be very well served, however, by treating Captivate
as the excellent standalone product that it is, and bring the
Captiavte-published SWF directly into your blog or whatever, just
as it is.
Good luck, and
welcome aboard the Captivate User Community!
.
Similar Messages
-
Does Captivate use whatever version of Flash you have installed to publish project?
Does Captivate use whatever version of Flash you have
installed to publish project? I wondering if I delete Flash 8 will
Captivate only publish in the only version of Flash you have
installed and thus availabile on your computer?When I bring it into Flash MX, I have lost alot of my button
info. Do I have to go back and manually include that information in
Flahs MX 2004? -
Why does captivate 5 scorm 2004 change the pass/fail status when using complete/incomplete
SUMMARY: I am trying to use SCORM 2004 reporting but I am finding out ADOBE does not diffentiate between COMPLETE/INCOMPLETED and PASSED/FAILED variables in the SCORM 2004.
RESULT: I can not accurately get the passing/failing status from the course.
QUESTION: Is their anything I can do or does ADOBE have a patch they have release which will accurately report the passed/failed STATUS as well as the completed/incompleted status.
OTHER RESEARCH: I even attempted to post these "proofs" on scorm.com and they have something called "SATISFACTION TRACKED" to accomodate content creation systems (CAPTIVATE 5) which does not follow the standards of SCORM 2004.
BACKGROUND: the report status "Incomplete/Complete" and "Pass/Fail" under the publishing options for SCORM 2004 essentially mean the same thing when the CAPTIVATE COURSE sends setvar commands to the SCORM API... In other words the SCORM API receives the same exact commands when publishing in both modes. "THIS IS WRONG"
why is the wrong? IF REPORTING; incomplete/complete ; the CAPTIVATE 5 COURSE SHOULD NOT "change" the STATUS OF PASS/FAIL when attempting to report COMPLETE/INCOMLETE with 100% slide views.
DEMO #3> SHOWS THE PROBLEM
About DEMO #1 and DEMO #2> these are other reporting options I attempted with other problems arrising..so these images are just for supporting my original problem which is shown in DEMO #3...
DEMO 1 (REPORT STATUS has no affect on reporting):SETTINGS:
PASS: (PROBLEM)
Anything above Passing Score is not recorded to LMS (once passing is reached...no more bookmarks are recorded)
FAIL: (CORRECT)
Failure gets sent to the database on the last screen with "completed"
DEMO 2 (Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api):
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database
FAIL: (PROBLEM)
NOTHING GETS SENT TO DATABASE (stuck in final score screen forever)...because it says "INCOMPLETE"
DEMO 3:
Report status [Complete/Incomplete Pass/Fail] has no impact on commands sent to scorm api
SETTINGS:
PASS: (CORRECT)
Very Last page gets sent to the Database with a 90% passing with "completed"
FAIL: (PROBLEM)
LAST SLIDE SENDS "completed" but GETS SENT AS A PASSING SCORE??? even when it is a failure
(IN OTHER WORDS ADOBE CHANGES THE PASS/FAIL STATUS based on slide views...
this is WRONG ....REALLY WRONG becuase I am trying to report
"COMPLETE/INCOMPLETE" for 100% slide views
PASS/FAIL OPTIONS:
OPTION I CAN PURSUE?
SO WHAT CAN I DO? YES, I CAN TELL THE LMS...to COMPARE THE SCORE RECEIVED DURING A "COMPLETE" status...and then change the grade in the LMS based on the SCORE IN THE LMS...BUT THAT WOULD MEAN THE LMS COULD REPORT ONE GRADE and the COURSE COULD REPORT A DIFFERENT GRADE....and that would not be good.
ALL OF OUR COURSES SHOW THE STUDENT THE FINAL SCORE WITHIN EACH COURSE..
QUESTION TO ADOBE?
SO ADOBE when are you going to differentiate these two reporting options so that the PASS/FAIL OPTIONS ARE ACCURATELY REPORTED WHEN USING COMPLETE/INCOMPLETE?
MORE INFORMATION
HERE IS THE SCORM.COM "Satisfaction" adjustment (very last line) to accomodate inconsistent reporting in CAPTIVATE 5.
Thanks,
DOUG LUBEY OF LOUISIANA
www.douglubey.com
OTHER WEBSITES:
http://forums.adobe.com/message/3332035
http://forums.adobe.com/message/3122315
http://forums.adobe.com/thread/712502?start=50&tstart=0
http://forums.adobe.com/thread/800570
http://forums.adobe.com/thread/720121
SEARCH ENGINE REFERENCE:
CAPTIVATE SCORM SUCCESS_STATUS
captivate 5 scorm 2004 pass/fail is dependent on complete/incomplete
scorm 2004 captivate cs5 success_status incorrect
scorm 2004 captivate cs5 reports success_status incorrectly
scorm 2004 captivate incorrectly reports pass/fail
scorm 2004 captivate 5 incorrectly reports pass/fail
scorm 2004 "captivate 5" incorrectly reports pass/fail
captivate 5 sends a pass even when a failure is issued by the course using scorm 2004.
captivate does not work properly when working with completed status.
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENT
CAPTIvATE 5 cmi.completion_status
and cmi.success_status does not work independently with scorm 2004. they both share the same definition. These two field were designed to help differentiate the difference between a passing or failing score and when the course is actually completed. WITH CAPTIVATE 5 they do not differentiate the two. COMPLETE means PASS and INCOMPLETE means fail..
I was trying to use "completion_status" as a way to determine when all slides were shown. So that I can send the final score (PASS/FAIL) the LMS after all slides were viewed and this was the absoluted score the student recieved.
2011 CAPTIVATE CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
2010 CAPTIVATE CHANGES SUCCESS TO PASSED WHEN COURSE REPORTS FAILURE
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING
CAPTIVATE 5 CHANGES cmi.success_status TO PASSING WHEN COURSE REPORTS FAILURE
CPTX CAPTIVATE CHANGES cmi.success_status TO PASSING
CP5 WHY DOES CAPTIVATE SCORM SUCCESS_STATUS
CPTX WHY DOES CAPTIVATE CHANGE PASSING STATUS
CPTX CAPTIVATE SCORM CHANGES FAILING SCORE TO PASSING SCORE
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS MEANS THE SAME THING
CAPTIVATE SCORM SUCCESS_STATUS COMPLETE STATUS SHOULD BE INDEPENDENTHi,
Here's something I found in a similar situation... hope this helps!
After publishing your CP5 project as a SCORM 2004 zip file, unzip the file so you can get into the separate files. Open the imsmanifest.xml file with a text editor; I like using Notepad++. Search for the line starting with <imsss:minNormalizedMeasure>. The complete line will probably look like <imss:minNormalizedMeasure></imss:minNormalizedMeasure>, this is the line that is supposed to contain your passing score (at least for our LMS). So, if your passing score is supposed to be 80%, edit this line to be: <imsss:minNormalizedMeasure>0.80</imsss:minNormalizedMeasure> and save the file. Then select all the files and re-zip them, I use 7-zip for that.
I found one other weird thing that doesn't happen 100% of the time, so test it. In the example above, try to get a score of exactly 80% (or whatever passing grade you are using) and see if you get the correct status reported. I found I sometimes have to re-edit that line in the manifest file to be 0.79 so it correctly includes an exact 80% score. No idea why and you have to watch the number of questions in your quiz to make sure that works for you mathematically.
If this works or not, I'd recommend posting your results so others can get some ideas. Good Luck!! -
Controlling Captivate movies from a parent Flash movie
Hello, i am in the works of onverting my old AS2 code, for controlling Captivate movies lodaded into a Flash container, over to AS3 becasue of the transition to Captivate 5. There were some weird issues in AS2 and Captivate 3 which i fortunately vere able to solve when i first made this container. Now i am getting weird and unpredictable results when trying to set the appropriate variables in the Captivate move. The main culprit is: rdcmndRewindAndStop, it does indeed rewind the movie, but... it starts playing again... Could anyone be so kind to give me the reason why or better even provide me with a solution to this unneeded change, its quite annoying, and no rdcmndPause does not help, not before rdcmndRewindAndStop or after, the movie is happily trottling along...
sincerely
Frustrated developer with a bloody short deadlineHello and thanks for replying, yes it worked! But... we have to manually edit 40+ files to make this stupid thing to work... Do you know if there is any way i can put those scripts in a flash object, or better even modify the movie from the parent container? This is making our production process way longer than is affordable tbh, a single project consists usually of over 100 captivate movies, and we simply can't manually edit each and every one of them.
I wish i could get my hands on a Captivate developer ;p -
Captivate progress bar controlled by Flash Actionscript
Hi,
I am currently working on a project where I need to load multiple captivate files (topics) into a Flash interface to create an e-Learning module. I have greated a progress indicator within the Flash interface which indicates how far through the module you are. This is working correctly, however I would like to display more information.
Currently it only moves the progress indicator when a particular topic (captivate swf) has been viewed (if I have viewed 4 topics out of 10 it would show 40%). What I would like to do is also make the progress indicator move when the user moves to a new slide within the captivate movie (if I have viewed 4 out of 10 topics, and viewed 5 out of 10 slides of the current captivate movie it would show 45%).
As I mentioned the multiple captivate movies are being loaded into Flash, and that is where the progress indicator is currently sitting (controlled by Actionscript). Is there any way of Flash finding out when the user has navigated to a new slide within Captivate? I have noticed in the output that every time a new slide is viewed the following code is displayed to the output:
Branching::script:;;
deepak branching : scripteval:[object Object];
Does anyone know what this action/function that Captivate is calling is? Can I call a listener function testing for this action/function?
Kind regards,
DuncanHi Duncan,
The "deepack" output is a trace function the developer put inside of Captivate 4 for testing purposes I believe and doesn't serve any other purpose. There is a Captivate 4 system variable available from the Project>Actions>Variables menu that will track the current frame(slide) within Captivate. If you load the published captivate .swf file into Flash, you can access this variable by targeting the instance of the loaded .swf movie and then the name of the variable.
Dan -
Updating Studio MX 2004 from Flash mx 2004?
Hi Guys,
just wondering if anyone knows an answer to the following.
I've got myself an update version of studio mx 2004 with
flash pro (with a view to updating to CS3 web premium). My problem
is this, will it update from flash mx 2004 standard or do I need an
earlier version of flash for the update to work?
I know it needs only one application to update, but is flash
mx 2004 standard suitable?
CheersIgnore any activation error messages or warnings relating to MX 2004.
The activation server for that version has been shut down.
You can now use a new non-activation serial number provided by Adobe
Error: Unable to Activate | Macromedia products -
Captivate 4 not exporting to Flash CS4 correctly
When I export from Captivate 4 to Flash CS4 it doesn't place the imported objects on their own timeline. Instead, it places each object into a movie symbol, which has its own timeline. The problem is that when I save it as a .swf in Flash and then I open it in After Effects none of the highlight boxes are visible.
As you know, After Effects does not see Flash symbols that are buried below the main timeline.
I opened up a project I worked on a year ago (with a different computer) and the Flash files had the exported Captivate items on the main timeline with the object on its own layer. Those files work fine in After Effects.
Can anyone tell me if they are having the same export issue with Captivate 4 not exporting its elements in Flash on the main timeline (as seen in the help file: http://help.adobe.com/en_US/Captivate/4.0/Using/WS5b3ccc516d4fbf351e63e3d119e9582981-7fff. html)?
Thanks!I found the solution here (http://labnol.blogspot.com/2004/09/export-captivate-movie-to-macromedia.html). I'll reprint the steps here:
1. Close Flash CS4 if it is open.
2. Open Windows Explorer.
3. Navigate to:
C:\Program Files\Adobe\Captivate
4. Copy the RDMFISTUB.dll file.
5. Navigate to:
C:\Documents and Settings\username\Local Settings\Application Data\Macromedia\Flash CS4\en\Configuration
Note: The 'Local Settings' folder by default is hidden. If you are unable to locate the 'Local Settings' folder you can unhide it by opening Windows Explorer, select Tools > Folder Options > View, and select the option to 'Show hidden files and folders'.
6. Create a new folder called Importers. Your final path should look like this:
C:\Documents and Settings\username\Local Settings\Application Data\Macromedia\Flash 8\en\Configuration\Importers
7. Paste the RDMFISTUB.dll into the Importers folder.
8. Open Flash CS4.
9. Create a New Flash Document. Save the document (or Flash may freeze when importing)
10. Select File > Import > Import to Stage.
11. Browse to and select the CP file.
12. Click OK.
Here is a comparison picture of the results. Without the steps above the imported Captivate assets will reside inside of a movie symbol (one for each slide). This is labeled "incorrect" in the image. I want each asset on a new layer in the root timeline. This is labeled "correct" in the image.
I want to go from Captivate to Flash to After Effects (because Captivate generated Flash files are unreadable in After Effects). For full disclosure, I used Captivate 3 in the steps above, but I hope this is a solution for Captivate 4 as well (I decided to stick with Captivate 3 because it worked in a project I used a year ago).
Message was edited by: EliteEraser -
Captivate Project Information window on Flash player
I published a Captivate Project as an executable file for
Macintosh. When I click on the SWF file, it opens up in the Flash
player, and not in my browser. Also, the Project Information window
does not go away, even when I click on the close button. Some of
the buttons on the navigation bar don't work either, like Exit and
Forward. Has anyone come across this problem?The purpose of beta software is to find potential problems. You have just found one, and you should report it back to the beta team.
If you think it is a Flash Player bug, report it at https://bugs.adobe.com/flashplayer/
If Flash Player works fine on the release version of Firefox, then I suggest that you reinstall that version. -
Hi,
I have a flash header that I created for my site using flash
mx 2004. But I have recently upgrade to flash 8. If I try and open
up the header file in flash 8, the document is all disfigured and
then timelines etc are all messed up. Is there anyway I can get it
to look like it does when I plug it into flash mx 2004.
Regardsseabaz wrote:
> Hi,
> I have a flash header that I created for my site using
flash mx 2004. But I
> have recently upgrade to flash 8. If I try and open up
the header file in flash
> 8, the document is all disfigured and then timelines etc
are all messed up. Is
> there anyway I can get it to look like it does when I
plug it into flash mx
> 2004.
> Regards
That's rather weird, I open MX 04 files in 8 few times dayli,
never had a single problem
nor do I hear anyone else complain about similar issue.
Perhaps someone temper with that
file ?
Best Regards
Urami
<urami>
If you want to mail me - DO NOT LAUGH AT MY ADDRESS
</urami> -
Do a basic call in as2 with scorm 2004 using flash template
I can;t seem to get any calls working within flash. This is in as2 but needs to work with scrom2004. I have published using the scorm 2004 template, and all the needed files (including the manifest) are there
The init command works
fscommand("SCOInitialize", "");
but any get or set commands do not I have tried tons, including
fscommand("SCOGetValue", "cmi._version,ver");
fscommand("SCOGetValue", "cmi._version:ver2");
ExternalInterface.call("SCOGetValue", "cmi._version"))
I am just trying a simple example, getting the version variable. both are null when outputted
Any ideas how to get a simple value
ThanksHI,
use the following
create object wordobj 'WORD.APPLICATION' .
if sy-subrc ne 0 .
message s000(su) with 'Error while creating OLE object!'.
leave program .
endif .
set property of gs_word 'Visible' = '1' .
SET PROPERTY OF gs_word 'Save' = '1' .
get property of gs_word 'documents' = gs_documents.
call method of gs_documents 'Add' = newdoc.
Thanks & Regards,
Vallamuthu. M -
Captivate and HTML issues in Flash Builder / Air App
I have a Flash Builder project that includes an HTML component and several Captivate SWFs that play in another window of the app. If I do not have the HTML component on, all works fine. However, when I add the HTML component, I get the following error when I go from one Captivate SWF to another:
Error #2037: Functions called in incorrect sequence, or earlier call was unsuccessful.
at Error$/throwError()
at flash.html::HTMLLoader/throwIllegalMethod()
at flash.html::HTMLLoader/getChildByName()
at com.adobe.captivate.main::cpMovieController/restoreFocusObject()
at com.adobe.captivate.main::cpMovieController/skipFrames()
at com.adobe.captivate.main::cpMovieController/movieonEnterFrame()
Does anyone have a suggestion on how to suppress the Captivate movie from calling the restoreFocusObject or how to suppress the error? I have tried using the HTMLUncaughtScriptExceptionEvent handler but that is not capturing it.
Thanks!Instead of using the File object, try URLRequest instead:
var urlReq:URLRequest = new URLRequest("Special_Assignment_Title.flv");
ns.play(urlReq.url);
Chris -
Adobe Captivate 4 not detecting latest Flash Player
Hi,
I just put together a new laptop, and insatlled all the normal programs/drivers - flash player, adobe reader, etc.
I installed Flash Player 10 from your website, and received the confirmation flash screen "Congratulations you now have the latest..."
I installed Adobe Captivate 4 - Trial Version from your website without any problems downloading.
This is not my first attempt at installing/un-installing/re-installing both Captivate 4 and Flash Player 10 on this computer - I'm on my fourth attempt at reinstalling both programs.
I am running Vista Ultimate x86.
This computer meets all system requirements by Adobe Captivate 4.
Is this a problem with Captivate, Flash Player, or (doubtful) my computer?
Thanks!Lilybiri,
This is odd, I am certain that I read an addendum on the Flash 10 download page last week, it explained that the incompatibility problem was fixed.
That message is no longer present today.
Other than that, some security changes were also made to Flash 10 that may impact your work. See this link: http://www.adobe.com/devnet/flashplayer/articles/fplayer10_security_changes_print.html#hea d32
To check your current version go here: http://www.adobe.com/software/flash/about/
I am using version 10.0.32.18. I have run many compatibility tests and haven't found problems with this version of Flash.
If version 10 is causing problems for you, uninstall by going here: http://kb.adobe.com/go/tn_14157
Some better instructions I found:
Uninstalling Adobe Flash player..
0. Go to this page:
http://kb.adobe.com/selfservice/viewCon ... d=tn_14157
and download the latest windows flash uninstaller. (uninstall_flash_player.exe).
1. Close down all browsers.
2. Go to control panel, and then to add/remove programs.
3. Uninstall Adobe Flash ActiveX.
4. Uninstall Adobe Flash Player.
5. Close Add/Remove Programs and Control Panel.
6. Open the Command box [Start/Run will bring up the command box] and change to the directory to where you
downloaded the flash uninstaller.
e.g: cd C:\Downloads\Software
7. Type this in [command box]:
"uninstall_flash_player.exe /clean" (No quotes & notice the space between the .exe and /clean)
and press enter.
8. Click Yes.
9. Click Close.
10. Repeat steps 7-9 once. Close the Command window.
11. Go to:
C:\WINDOWS\system32\Macromed
and delete Flash directory.
12. Go to:
C:\Documents and Settings\your name\Application Data\Adobe
and delete the "Flash Player" directory.
13. Go to:
C:\Documents and Settings\your name\Application Data\Macromedia
and delete the "Flash Player" directory.
14. Start MSIE and open this address:
http://www.adobe.com/go/getflashplayer
15. Be sure to UNtick "Free Google Toolbar"
and click Agree.
16. Allow the ActiveX popup.
17. Click Install.
18. Close MSIE.
19. Open either Firefox/SeaMonkey/Opera/etc and open this address:
http://www.adobe.com/go/getflashplayer
20. Click Agree
21. When the file finishes downloading close your browser.
22. Navigate to where you saved the file and double click it:
install_flash_player.exe
23. Click Close.
24. Open any browser and go to:
http://www.macromedia.com/support/docum ... ger03.html
and drag the bar all the way to the right to Unlimited
25. Close the browser.
26. Flash should be working, if not, wait for the site to update to be compatible (or try using previous versions of flash player at your own risk).
27. The Adobe test page is here:
http://www.adobe.com/shockwave/welcome/ -
Controlling Captivate variable values with AS2 Flash animation
I created a couple of simple Pause/Resume Flash AS2 buttons to manipulate the Captivate playback using the following script:
on (release) {
_parent._parent.rdcmndResume = 1;
on (release) {
_parent._parent.rdcmndPause = 1;
The buttons work as intended if their "Display for:" values are set to "Rest of project". The buttons seem to have no effect on the Captivate playback if "Display for:" is set to any thing else.
The problem is that I hoped to only show the buttons when I want the user to pause or resume the Captivate timeline. However, for some reason which I do not understand, they do not work when their "Display for:" value is set to "specific time".
Any ideas why the buttons behave the way they do or ideas on how to make them do what I wish they would do?Hi Pra MMartin,
When 'Display for:' is selected as rest of project/ duration of animation, the swf loader will be placed on the timeline of the Captivate swf.
When 'Display for:' is selected as specific time/ rest of slide, the swf loader will be placed inside the slide (slide is placed on the timeline of Captivate swf).
So try this when 'Display for:' is specific time/rest of slide:
on (release) {
_parent._parent._parent.rdcmndResume = 1;
on (release) {
_parent._parent._parent.rdcmndPause = 1;
Hope this helps.
Ravi Kishore. -
Captivate movie clips looping in Flash
I've read the discussions on the forum, but nothing seems to
be able to stop a captivate 2 movie clip from looping when brought
into Flash. I exported the captivate movie with the default values,
converted it to a movie clip in Flash8 so I could resize it,
brought the movie clip into the Flash movie by dragging it to the
stage. Everything looks great, but I can't stop the clip from
looping. Stop commands placed within the movie clip seem to have no
effect nor do commands put on the main timeline.
Thanks for the help.Hi there
Hopefully someone here will have an answer for you. In the meantime you might also wish to post this question in the forums for Acrobat.
Click here to visit the Acrobat forums
Cheers... Rick
Click here for Adobe Certified Captivate and RoboHelp HTML Training
Click here for the SorcerStone Blog
Click here for RoboHelp and Captivate eBooks -
Captivate 5 SCORM 2004 3rd Edition ADL Testing Issues
I have published a project from Adobe Captivate 5 and am currently trying to get it through the Advanced Distributed Learning (ADL) Sharable Content Object Reference Model (SCORM) 2004 3rd Edition Conformance Test Suite. I was able to pass the first part: the Content Package Conformance Test and solve the initial errors I was experiencing. However, I now have a new set of errors relating to the Sharable Content Object (SCO) Run-Time Environment (RTE) Conformance Utility Test. It appears that they all stem from:
ERROR: The Terminate() method was never successfully called.
Here is the detailed SCO test log:
Attempting to Launch SCO C:\Documents and Settings\Administrator\Desktop\offender_transportation6\offender_transportation.html
Commit("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: The SCO called the API methods out of order
ERROR: Commit Before Initialization
Terminate("") has been called
ERROR: The Communication Session is NOT initialized
ERROR: An invalid Terminate() call was made
ERROR: The SCO called the API methods out of order
ERROR: Termination Before Initialization
ERROR: The Terminate() method was never successfully called
ERROR: The SCO is SCO RTE 1.0 Non-conformant
The project is currently set to issue a completion status to the LMS after 22 slides have been viewed. Then the project should output the Quiz Results and Slide Views to the LMS. For Project End Options I have tried both: Stop Project and End Project. I haven't been able to find any other settings in Adobe Captivate that relate to this Terminate problem.
Can anyone give me some insight into what could be causing this error?As I tested, Captivate really cannot support 3rd Edition.
I'm not sure what's the differences between 2nd and 3rd
Edition, but I found that Articulate's '09 series (
http://www.articulate.com/products/quizmaker-publishing.php)
outputs these two editions separately.
I hope Capative could update the module to treat 3rd
specially.
William Peterson
eLearning Master
http://www.sameshow.com/blog/
Maybe you are looking for
-
How can i sync my iPod 5S to iTunes?
I recently got a new iPod 5S and had to update iTunes to version 11.0, but when i tried to sync the ipod to iTunes, it didnt pick it up on devises. How can i get my ipod synced to itunes? also, when i tried to sign into my itunes account on it, it wo
-
Why are my photo album names in iPhone wrong?
If I sync my iPhone 5 with iTunes (MAC) all the album names in iPhone are not the same as in iTunes.For example, I have an album name "SAVOGNIN" but the photos in there are from "MENORCA" not from SAVOGNIN.
-
Input/Output error message when uploading a DVD to copy.
Hi All, I have been getting this message "Unable to Create: input/output error." when trying to upload a dvd to burn using Disk Utility . At first I thought it was a problem with the disc so I had a friend of my send me another copy. This was 2 discs
-
How in the hell do I completely uninstall the creative cloud from my computer?
I have deleted the applications and the Updater is still on my menu bar. (Mac) I read that you can go to preferences and manage from there but now when I click "Open Updater" it says error...probably because I deleted the files. I just want this off
-
Hi. I need help about the sincronize information that i obtain directly from the ipad. i need to pass these to PC. And i need to configure icloud in outlook. I´m triyng, but the outlook send me and error. Thanks. Eduardo