Captivate TOC navigate visited slide only problem. Visited topic can not click when exit and open again the training.

Hi,
I have created the TOC and i want the learner just can click at the Topic they have visited. i have no problem at the first time viewing the training.
The problem is i read half of the training, for example I have Topic 1 - Topic 5, I just read until Topic 3 finish, then I exit the training. When i reenter the training, the Topic 1 - Topic 3 which i have already visited can not click, I can not review back those topic. At the TOC setting, I have enabled the Self-Paced Learning, Enabled Navigation, Navigate Visited Slides Only.
Is there any other setting I need to enable to make the learner can click at the topic they have visited when they exit and reopen the training?
Thanks,
Chee SK

I don't think you are understanding what I'm saying.
If you are using an LMS then the bookmarking you are currently using MUST be Resume Data bookmarking. It's the ONLY kind Captivate has that will work with LMSs.
If you are unable to navigate to a visited topic after resuming from the LMS then it's possible you've got some other setting in your project that is interferring with that navigation. For example, if you have NOT allowed Backward Movement in your Quiz Settings, then under certain circumstances that will mean you cannot navigate because resuming the lesson dumps you somewhere in the middle of the quiz and you're not allowed (by the settings) to go to an earlier slide.
Is that what you are seeing?

Similar Messages

Have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

have a real problem i just can't make a reservation and this is the only way to contact apple . It seams to keep going to the american site .

Apple world-wide support numbers are found at: http://support.apple.com/kb/HE57
If this is regarding your information line that says a stolen iPhone, Apple can do nothing to help you. You must track the iPhone yourself using iCloud and must have turned on Settings > iCloud > Find My Phone before it was stolen. If that was not done, there is no way to track the iPhone.
Report the theft to the police and the cell service provider and ask if they can blacklist the iPhone so it cannot be used. Change all passwords associated with acconts on the iPhone.

I am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

i am currently using final cut pro 6 and i have a problem that i can not to do a play out to the dvcam but i can record from the dvcam, can you help please?

I believe there is no "Export to Tape" feature as appeared in legacy FCP.
SORRY! Just noticed you are using FCP 6.
You need to ask this question in the Final Cut Studio forum.
Message was edited by: Ian R. Brown

When visiting some sites i can not return without quiting and opening foxpro a second time

When I got to some sites and then click the down area to return where I was before is not available and I have to quit the site and open foxpro all over again.

Step by step, how did you arrive at seeing this agreement?

New problem. I can not burn a playlist to disk.

New problem. I can not burn a playlist to disk. The 'checking playlist' now takes about one second, looks very much like a malfunction here. Seems to initialize the disk - them moves straight into 'burning/finalizing disk' which also takes about one second. Then 'burning - finishing disk takes a little longer -
Error reading is "The attempt to burn a disc failed. The disk drive didn't respond properly an can't recover.'
This happend once before a while back and I thought it was 'too skinny disks'. Using 'printable disks; seemed to fix the problem - until now.
Blank cd's can be opened in the finder and files burnt to them.
DVD's can be burned from DVD Pro.
Music cd's and dvd's can be played.
Just can't burn the itunes playlist.

lewelew
From your iMac? OS 10.9.2? iTunes? Other? please give as much info as you can about your system hardware and peripherals, OS, software, etc. Is this misbehavior new? First try? You get the idea, too much info is not possible.
CCC

I want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

i want to use Xcode to create an app and i need developer tools. so i need to join the devoper program only problem is I'm not 18

You can get Xcode without joining the developer program. Just go to the App Store and download it (it's free).
You'd only need to join the Developer program if you want to put your app into the App Store, this is for OS X.
You will need to join the Developer program if you want to develop for IOS. In that case you will need a parent or guardian.

Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it t

Actually I have problem in adding music to be played across all folios, the problem happened when I just lock the ipad and open it, the publication is still opened and i can navigate it but the music is stopped, and cann't be continued. how can I fix it to be continued after opening the ipad and continue navigating the digital publication.

yes,thank you for ur answer, but the owner of the publication which I working on said for me that this is a problem, and we can't submit the digital publication if I can't fix it.
Is their any solution to make the audio run after the device is unlocked.

My MacBook Air has problems connecting to a saved network when I first open it.

My MacBook Air has problems connecting to a saved network when I first open it. When it idles, the connection gets lost and even clicking on the network won't connect it. Then I have to turn off wireless and turn it back on for it to connect. My boyfriend's MacBook Pro does not have this same problem and this problem started maybe 2 months ago and nothing about our internet or router has changed, and its only my computer having the problem. Its a 2013 MacBook Air and my softward is: OS X 10.9.1 (13B42). Please help!

Hello, nheredia05.
Thank you for visiting Apple Support Communities.
There are a couple steps that I could recommend trying. Power cycle the router and test to see if the behavior persists. Next, try an remove this prefered network from your list and then add it back again. Make sure all firmware updates have been processed on the router side and the settings have been optimized for performance. If the issue still persists try the steps in the second article.
iOS and OS X: Recommended settings for Wi-Fi routers and access points
http://support.apple.com/kb/ht4199
About Wireless Diagnostics
http://support.apple.com/kb/HT5606
Cheers,
Jason H.

There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)

Trying to open a streamed PDF in an IFRAME in Internet Explorer 9 on my Win7 64bit machine.
This results in the following dialog:
There is a problem with Adobe Acrobat/Reader. If it is running, please exit and try again. (4:4)
The PDF is streamed (not read from disc) from a servlet in our Java WebSphere environment and the call looks like this:
https://intranetserver.com/myapplication/OpenDocumentServlet.pdf?documentToOpenID=1
The Servlet sets content-type header application/pdf and content-length and writes the bytes to the buffer.
Does the error dialog even come from Acrobat? When the dialog opens there is no active AcrReader process visible in task manager.
Please advise!
Meddelandet redigerades av: p b
Solved. Our IT dept. responsible for packaging and deployment repacked and redeployed 11.0.9. Unknown what changes were made to make it work.

I don't know what acrofix.exe is; can you explain?
Issue
Nothing happens when you launch Acrobat 30 days after installing a CS6 suite.
Solutions
Important: Perform the solutions below in order. Do not continue further if an earlier solution resolves the problem.
Solution1: Install the patch for Acrobat installed as part of a CS6 (Windows Only)
1.   Log in to your Windows computer as an Administrator.
2.   Click the following link to download the patch file:
Acrofix.zip
3.   When prompted "Do you want to open or save this file?,” click Open.
4.   Extract the file. The location varies depending on your operating system and the utility.
5.   Double-click the extracted Acrofix.exe to begin the execution.
6.   If the execution is successful, Command Prompt closes automatically.
7.   When the execution is complete, launch Acrobat.
or
Solution2: Install the patch for Acrobat installed as part of a CS6 using Command Prompt (Windows Only)
1. Run the Command Prompt as an Administrator.
2. Navigate to the location of the extracted hot fix in Solution 1 (Step 4).
3. Type Acrofix.exe to execute it.
4. If the execution is successful, Command Prompt shows Exit Code:0
5. When the execution is complete, launch Acrobat.
Solution 3: Reactivate Acrobat through another Suite product
I will try your cleaner, thanks
[private data removed]

I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar

Question
I opened my computer and the whole top only shows web search, I can not find my bookmarks and I tried reloading firefox and still nothing but tab bar. Tried f10, alt, nothing! Can I reload an old firefox? There is no firefox logo at top. When I rt click at top I see hide toolbar and leave full screen. To the right there is only a home sign. How can I get my BOOKMARKS ??????? I so need them and hate what ever this is that now shows up on firefox.

The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information.
Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!

I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you

I have a problem that I can not load or even close the download in iTunes, it turns out I have hanging in the mode, and because of that I can't download from AppStore, because it turns out that the other programs I have on standby. What do I do? Thank you.

If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
 Cheers, Tom

TA25981 I have set up my base station, no problem, but I can not locate my set up assistant to complete the process to work with our iPads. It is Mac OS X 10.7.2. Anyone help?

I have set up my ariport extreme base station, no problem, but I can not locate my airport assistant to continue to work wirelessly with our ipads. When you click on the airport base station, it only shows the info about the base station. The assistant will not come up. Can anyone help? It is a Mac OS X 10.7.2.

Not sure what you mean by "assistant".
Assuming that you have set up the AirPort Extreme to broadcast a wireless network, you need to connect to that wireless network from each iPad or other wireless device.....just like you would connect to a network at the coffee place or bookstore.
On an iPad....
Tap Settings on the home screen
Tap Wi-Fi on the left panel
Tap on the name of your new network when it appears
Tap in the password
Tap Join

There was a problem with FaceTime. You need to quit and open FaceTime again.

HELP!!
"There was a problem with FaceTime. You need to quit and open FaceTime again." pops up everytime i try and open facetime!
I have tried doing everything that people have posted to try and fix this problem...NOTHING has helped!
what do i do!?!?

I got it to work, by observing and doing the following...
1) Console showed a permissions error accessing ~/Library/LaunchAgents/com.apple.imagent.plist. Turned out that folder was empty and only 'system' had access to write to it, so I set my main user as having read and write access (Get info on the folder, add the user at the bottom under permissions)
2) Still wouldn't work, but I saw something about imagent. Searched my hard drive via terminal for it, and found that inside the FaceTime app is an imagent.app. So, I launched that. It has no interface but shows up on the Dock.
3) Launched FaceTime. Yay! It works! BUt I have to launch imagent manually first.
4) Went back to ~/Library/LaunchAgents and deleted the com.apple.imagent.plist file which was still at 0 bytes. The next time I launched FaceTime, it created that file, and didn't need imagent.app to launch manually.
Your mileage may vary, because you may have different errors.

Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?

i've noticed a touch ID only works with my iPhone six is not plugged into the wall was soon as I plug it in it doesn't work anymore doesn't even register fingerprint.

Charger60 wrote:
i
Touch ID in my iPhone six does not work when it's plugged into the wall is anybody else having this problem?
No. You are the only one. The way I know is that I don't have the problem, therefore no one else can have it.
Seriously, no matter what problem you have, with a half billion iPhones in use, someone else will have the same or similar problem. So knowing that doesn't help solve it in the slightest. As it's new and still in warranty I would take it to an Apple store. Make a genius bar appointment first so you won't have a long wait.

"there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)

We are getting the following error "there is a problem with adobe acrobat/reader. if it is running please exit and try again. (523.523)" and a gray screen appears (Image not viewable) with multiple users. We are using Adobe Reader XI (11.0.05) and (11.0.06). The current workaround is to log off the website and log back in. Once the user logs back in, the pdf will appear. However it occurs anywhere from 2-8 times in a day. Anyone else having this issue or know of another workaround? Any suggestion with how to fix? Please help!!

Hi Valerie,
Please let me know the version of Adobe Acrobat/Reader & operating system installed on your computer?
Also, try this:-
Launch Adobe Reader/Acrobat.
From the menu, choose Edit -> preferences -> General
Uncheck the option for "Enable Protected Mode at startup"
Restart the Adobe Reader and web browser.
Regards,
Aadesh

Captivate TOC navigate visited slide only problem. Visited topic can not click when exit and open again the training.

Similar Messages

Maybe you are looking for