Captivate Video - GONE!! when I publish?

Hoping someone know whats happned?
My FLV video is there when I preview in browser - HOWEVER, When I publish the file to SWF. It plays well all BUT the video on one of my slides??
KHM

All the files were NOT in the root folder !!! sorry all KHM

Similar Messages

VIDEO CUTS WHEN I PUBLISHED ON THE WEB

Hi all,
My name is Dario. I am working in one society for worker's formation.
I often use Captivate CS 6.
I have one problem, when I upload one video (video lesson) in Captivate and export a SCORM document, the video published in the web, cut last second.
I don't understand.
In my project a slide's duration is same at video's duration.
Could somebody help me?
Thanks

Hello Dario,
When you inserted the video, did you insert the event video or Multi Slide Synchronized Video, or is it a Video recording done in Captivate?
Do you face this issue when you publish your Project and see that locally?
Make sure that there is no effect applied onto that video like Fade out only in the Properties of that Video.
and also check from edit>Preferences> Project> start and end> fade out should not be checked.
Thanks.

New photos/videos gone when restored from backup. Why?

Just got the iPhone 5 over the weekend, which was a huge upgrade from my 2009 3G!
I didn't get around to plugging the phone into my MacBook Pro until today. When I synced my new iPhone, I clicked "restore from previous backup", which then it put all my old photos from 3G onto iPhone 5.
However, when this happened, all of my SMS and photos/videos that I took over the weekend are now gone. I presume the iphone replaced the new photos with my old ones?
Is there any way I can get those videos and photos back? Please let me know!
Thanks

When you restore from the backup you only get the data that was contained in that backup. You will lose any data on the device that occurred after the backup point.
Restore = Replace data on device.
It does not "add" that data to the existing data on the phone.

Why is the quality of my mpeg-4 video degrading when I publish them through IMovie?

The vids are in mpeg-4 format to start off with. I import them into IM and add some introduction screens and crossfades then Share/YouTube. Should I follow some other methodology to maintain quality?

This is the iPhoto forum - I will request that your quesion be moved to the iMovie forum where Movie experts hang out
LN

.flv videos not appearing in published .swf

Hi, I have imported some .flv files into my Captivate project, but when I publish it as .swf the files do not show I up at all... I have no idea why... Can anyone help with this.

Hello ,
Can you tell me the version of Adobe Captivate you are using (Go to Help > About Adobe Captivate) ?
Do you get any error message when you play the .swf output ?
Thanks

Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an S

Video files in Captivate 6 externalize when publishing the project. Is there any way to publish an SWF project with the video files all in one single file?

Rhonda, I used Captivate 6. Create a New Project. Set the project size to the size of your MP4. In my experience, this was 640 v 480 which also happened to fit nicely within my final project.
From the menu, select Video > Insert Video. Choose "Multi-slide Synchronized" and point to the MP4 on your local drive. Select a skin and playbar that you like from Project > Skin Editor. Then publish. In the Publish dialog, choose SWF as your output format option (not HTML5).
This is the SWF that I added to my master project through Insert > Animation.
Hope this helps!

Flash Video Lost when Published

I included a flash video in my captivate project. It looks fine in the preview. When I published my project the flash video does not play it just displays a blank slide. I appreciate any advice.

Hi there
Where are you playing the file from? Did you copy it to a server or are you testing on your own PC and seeing the issue?
If you copied to a server, did you remember to copy the FLV file?
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Videos don't display when i publish from my macbook

I created a module on my pc. it worked fine. I bought a mac, opened the project, edited it. when i preview it it's fine. but when i publish it, the videos, that are flv files don't display. when i publish from my pc the videos display. does anyone have any idea what's going on?

I am not a macbook user. But AFAIK, FLV being a Flash video, I don't think Apple will support it.
However, ideally Adobe Media Encoder (AME) should have converted your FLV to MP4 during the publishing process. Not sure why that is not happening. You can try converting the FLVs outside Captivate (using AME or any other tool), insert the video again on your macbook and see it it works.
Sreekanth

Adobe captivate video publisher upload button does nothing

Hi, on 2 different machines, the adobe captivate video publisher upload button does nothing. Add to that support says it's not available when I called in on a trial product. Hmmm if you won't help BEFORE I buy, what will happen after? c'mon... i've purches thousands of dollars worth of adobe software and currently own the creative cloud ...and I get the brushoff like that? Oh and the chat system wasn't working becuase the queue was too full....

lol. Great day. Just not for Adobe! . Worked fine on my older imac 27", but not my 2 new machines at work... macbook air and pc with a lowly 24gb ram... go figure.

Captivate Video Quality issues when post to YouTube

We are using Captivate 7 and I am creating training for the MS Dynamics CRM application.
I created a video demo selecting the application window as the screen size. When I replay the video in Captivate or when I publish to Adobe COnnect, the replay looks fine. When I publish to YouTube however the text on the screens I recorded is very blurry. How do I get a better result with the publishing to YouTube? .

I'd imagine Youtube would be better if you're targeting overseas. I'd have to believe that YouTube/Google has a more global delivery setup than the smaller Vimeo...so video may play back better overseas via YouTube than Vimeo.
Plus, integrating Vimeo video into Captivate may be more of a challenge...
On the other hand, maybe not. Can you integrate a Vimeo video using the Web Object? If so, that may give you MORE flexibility than the YouTube interaction object.
Additionally, I know you can setup private channels on Vimeo...so if you don't want your content visible to everyone, that may be a better option. Whether you can setup the URL in Captivate to access those private videos on Vimeo though, I'm unsure. I don't think that would be as possible/easy to do via the YouTube interaction widget...

Flash animation doesn't work when I publish Captivate file

Hi,
I have an e-learning developed by a third party using Captivate 6, they've inserted animations (swf files) created using Flash CS6. When I try publishing the Captivate file on my computer all the animations work well except for a particular one (a wheel that spins and asks questions).
When I publish the Captivate file and go to that particular slide and click anywhere other than this animation the whole thing freezes (this doesn't happen on other slides with the other animation/quizzes developed using Flash CS6 on the same project). However, when the developer publishes the same file on their machine it works well.
I don't have Flash CS6 installed on my machine (I only have Flash CS4 and can't open the animation/swf files), I asked someone else (that had Flash CS6) to try publishing the Captivate file and had the same issue I had.
Has anyone had this issue before? how can I fix it?
Thanks!

Since you are loading another SWF file into your main root timeline and want to transfer control to the loaded SWF you need to call _lockroot on the container that holds the loaded content since you are using _root. Like this:
myMCLMain.loadClip("flashSite.swf", "container2");
container2._lockroot = true; //Add this line after loadClip
Or you can remove the _root in the loaded SWF.

Cannot get next captivate to open when published as a zip

I am currently using Cap 4, but have the trial of Cap 5 as well.
I have a 7 mod course and need to be able to open the next Captivate module from the the last slide of the current module.
I have inserted a button with a path to the next movie, it works in both versions 4 and 5 when I publish in a folder, but when I publish as a zip file I get an error stating it cannot find the path.
I have moved the swf and html into the zip with the current movie, but it still errors out.
Can we "chain" the modules this way when publishing as a zip? I do need it to be a zip file for loading into LMS.
I'd appreciate any info that can help me out.

How are you asking the next project to open? Are you using a URL or the Project File Name? How are you publishing the files?
I've used this technique before with success (although never loaded it into an LMS). I used the Start/End under Preferences and linked to the Project name. All of the .exe files were in the same zip folder.
I'm not sure if the .exe works with an LMS, though.

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

When I publish a SWF/HTML5 module with Captivate 8 and try to run it using IE9 - I get the following error "The content you are viewing is not supported in the current Document Mode" - anyone know why?

TLCMediaDesign wrote:
I've seen a lot of threads about getting rid of these kind of messages. Those messages are there for a reason most of the time. If you have CSS animations or other HTML5 standards that cannot be rendered in IE9 they won't magically start working becuse you got rid of a message. I use IE9 since that is the minimum standard for the client. I have never seen that message publishing to HTML5 content.
IMO, if your client has IE9 I think that you should develop with IE9 in mind not IE11.
When you say "develop with IE9 in mind not IE11" do you mean use SWF instead of HTML5? I used the standard question types, and a converted PowerPoint presentation. I didn't add anything out of the ordinary.

When I publish a movie using Captivate 6 I sometimes get a slide that is overlayed with part of a previous slide. Does anyone know why this might be happening and what I can do to prevent it?

When I publish a movie using Captivate 6 I sometimes get a slide that is overlayed with part of a previous slide. Does anyone know why this might be happening and what I can do to prevent it?

Which version of 6? Check the slide quality, if it is at Low, push it to High or Optimized. Then uncheck all compression settings in Preferences, Project, SWF Size and Quality.

Captivate 6 - Error when publishing to Adobe PDF

Adobe Captivate CS6
Windows 7 (Pro)
Adobe Acrobat 9 (Pro)
Previously, with Captivate 5.5, I was able to Publish > SWF/HTML5 > Export PDF and use the PDF file to use for a review. However, with Captivate 6 I get an error when I attempt to publish my lessons to PDF. The image below shows what appears when I publish:
Has anyone had this problem and found a solution? I am not sure what I might have setup differently to cause this error.
In case it helps, here is my Publish screen:

Hi - if you search you will find a few questions varying on this theme, and I'm having a similar problem. It seems as though it may be related to Flash and Reader versions, as when Reader 10.1.4 upgraded automatically to 10.1.5 suddenly I was unable to read any new or previously working PDF files. I also had a colleague say that if he rolled back to Flash 11 (no later than just Flash 11) it started working again. If you want to try this, you can download an older version here - http://get.adobe.com/uk/reader/otherversions/
If this is the case, there seems to be no solution as yet (I happened to log in to make sure there had been no replies and saw your message!), but you can keep an eye on this thread to see if anything is posted here - http://forums.adobe.com/message/5011573#5011573
Cheers,
Jac

Captivate Video - GONE!! when I publish?

Similar Messages

Maybe you are looking for