Captivate videos - aspect ratio and skin

1. When I import video into captivate, it correctly keeps the same width and height of the source video IF I do not use the haloSkin. If I use the haloSkin (which is always visible and creates a frame around the video), the video itself shrinks to put the skin around it, but it also loses its aspect ratio and becomes squished vertically. There's no easy way to adjust the video so it uses the proper aspect ratio or even width and height without manually eyeballing it. Am I missing something?
2. Are the video skins customizable? If I wanted to do something simple like change the haloSkin to be colored black instead of white, is that possible?
Thanks,
Keith

1) The haloSkin subtracts 20 px from the width and 50 px from the height of event videos, which is not only counter-intuitive but obnoxious because it does indeed mess up the aspect ratio of your video as you noted. So a 640x480 video object with the skin applied has a video area of 620x430. Fortunately the 20 and 50 are absolute, and don't change with the size of the video object. This means that you can just add 20 to the width and 50 to the height of the video object to get your video back to the correct size. (a video object with dimensions 660x530 and the haloSkin applied has a video area of 640x480)
2) I'm unaware of any way to edit the skins.

Similar Messages

What is the aspect ratio and fps for video in Connect 9?

I'm trying to find any definitive details on the aspect ratio and fps supported by Connect 9. It is well documented for 8 that it was 640x480 at 20 fps. Is that the same for 9? Or has that improved?

The supported resolution and frame rates for video in the Video pod have not changed with Connect 9.

Pixel Aspect Ratio and ciphering type of footage-CS6

CS6- updated 12\18\13 V-11.03
Hi All,
A few questions about:
Pixel Aspect Ratio and ciphering type of footage. Bare with me as I touch on two different aspects of what I feel are related:
1. Setting up a Comp-
Having AE decide on the correct footage being used- Via >Import footage,.(to Folder) then drag it on, or into the 'make comp icon' where AE is supposed to do a 'best guess' for the comp settings. Be it square pix or otherwise. What are the second value in brackets ? See pic
2. Interpolation-
When using two diff footage sources- If using two different source footages in a comp. Is this where I should interplolate my footage to match the existing footage and the comp settings (If I have choosen NOT to pre-comp that secondary footage?)
3. Seperating fields-
How come footage that a camera manufacturer claims to be shooting in Progressive 30 or 24p is showing up as interlaced in my comp's CP? The manual to the cam says 30p or 24p or 60i The footage was shot at 30p (for sure)
Here is a screen grab of AE's 'best guess' of that footage, showing it with an UPPER field render; indicative of HD Interlaced footage and then in the inerpolate settings - 'kinda confirming it.
Now for the way out- Render:
4. If that is in fact Interlaced and I then want to reduce the size of that 1920 footage to 66% size... Do I need to do anything in particular at this point?
For some reason I am getting an error on my end when trying to export as an AVI and reducing size to 1280
5. Is this from the Field render of interlaced challenge?
I ended up with a couple of errors and then aborted the whole file and re-imported to start over with this error. Which happend again after a redoux
So I sent it over to Prem Pro to export those MTS Files as a movie and noted AGAIN the reference to Interlaced video. "upper and lower" Prem Pro was able to use the same MTS files and export a working movie. (so those files were not corrupt BTW) Yet Note PP's output reference to that footage again as Interlaced would be...
Thanks for any clarity on those "5" questions... NC

Thanks for the details Rick.
Thanks for the insight on #1
Ref #2, You should never change the interpretation of Pixel aspect ratio on footage unless you know for a certainty that it is wrong. For example, open Photoshop or Illustrator and create a new document that is 720 X 480 pixels and AE will always interpret the image as rectangular pixels because that is a standard rectangular pixel frame size.
Unless you specifically created the image in Photoshop with rectangular pixels it is square pixels so the interpretation must be changed to avoid distortion.
--Did you mean to write:
Unless you specifically created the image in Photoshop with SQUARE pixels using a rectangle layout? I am not trying to bust your blz here, I am trying to understand the unknown. (for me)
So it may very well be AE mis-guessing the footage and the Upper first is a mistake on AE's part and I need to test it to find out? On that note...
Ref#3, Separating fields must be done right. Some 1080P footage is interpreted as having fields. This may be incorrect and if there is a question you MUST test the footage. Test the footage by making sure that the fields are being separated
How do I make sure the fields are being seperated? Does the window as in pic two from the top of my post confirm that or is there another test?
Then I do the following:
then selecting the footage in the project panel and choosing Create Composition from Selection, then opening the Composition settings, doubling the frame rate and stepping through the footage a frame at a time. If the footage is really interlaced then each of the frames will be different. (IE: 29.94 to 59.94fps) OK
If the field order is reversed then motion will be in the right direction then reverse, then go back to the right direction. ---I did not understand? Are you referring to Upper and Lower reverse? Direction, as in fwd and back in Time line? Sorry unlclear on my end...
Oh and HFR footage? HFR? High frame rate??
One last thing, Do all cameras shoot anamorphic, or could they as AE is showing my MTS files; are Square? (1.00) Pic #1
@Dave- You -
At 1080, a lot of footage is interlaced, and evidently your camera made interlaced footage
Me- How do you know? because of the 2nd pic and upper field first indication?
You-Even if you know for a fact that it was shot 30p, the camera captures the entire frame... but it records it as two fields. They give it a fancy name: Progressive Segmented Frame.
Me- Is this typical false advertisement of the sales divison of brands like not telling you what CMOS or CCD is in a cam just slapping HD 1080p on the side of the box?
You-AE will treat it as an entire frame if you interpret it as having a field order of None.
Me- Won't that be a problem mis leading AE on an interpret?
Thanks Gents for the precise details.
Best
NC

Video aspect ratio looks wrong in Quicktime Player

When I export a movie as a Quicktime file (ending in .mov) and then play the movie using the Quicktime Player, the aspect ratio (4:3) of the movie looks wrong, as if it is "squished down" vertically. If I open the file in FCE, the movie looks normal.
The same thing used to happen with the .mov movie file that older versions of iMovie used to create; in Quicktime Player the aspect ratio looked wrong. In this case, if I open the original QT clips (created by iMovie during import) in the Player, they looked normal. It was only if I opened the .mov file created by iMovie that referenced all those clips (in the order they appeared in the sequence) that the aspect ratio was odd. If I open any of those items directly in FCE they look normal.
I think this is behavior of the Player and not a problem with FCE (or iMovie) or the video file. I'm just wondering why this is happening and if there's any way to make the Player show the movie with the correct aspect ratio.
Thanks!

Hi Tom:
Affected video was imported in one of two ways:
(1) From an old Digital8 Sony camcorder, using DV-NTSC 32Khz, directly captured into FCE.
(2) From a Canon GL2 camcorder, using Firewire Basic DV-NTSC (48Khz), captured using an old version of iMovie. The video clips are imported into FCE and rendered.
Affected video is either exported from FCE using Export>Quicktime Movie..., or is not exported at all but simply viewed in the Quicktime Player after capture. That is, capturing from within FCE, quitting FCE, finding the captured video, and opening it in Player.
Recall that the video aspect ratio also looks wrong when playing the Quicktime file generated by iMovie (which references but doesn't contain the actual video clips), but the ratio looks right when playing the actual clips found in the Media folder, within the iMovie project folder.
However, I also have some video that I captured from the Canon for a wedding, and when I play that captured file in Player, it does NOT appear to have the wrong aspect ratio, so I'm a bit confused why this might vary.
Thanks for your help.

Aspect ratio and render line issue

When I overwrite the video from the source (top left) window to the timeline, it is changing the aspect ratio and a red 'render' line is appearing on the time line.
The video is now zoomed in and pixelated.
I have not had this issue while editing with my other files and the settings seem to be correct. Am I missing something super obvious?

The PPro tutorial list in message #3 http://forums.adobe.com/message/2276578 may help, with more help in message #5
Look for the NEW ITEM information on page 5

Cropping in PS while Maintaining Aspect Ratio and DPI

I shoot the Nikon D3, RAW (.NEF) and convert through ACR. Through ACR, the DPI is set to 300 DPI; the DPI caries over to Photoshop.
I crop in Photoshop using the crop tool (not marquee). To maintain 2:3 or 3:2 aspect ratios, the crop tool requires the width and height in inches or pixels. If specifying resolution, the document size will crop to that DPI, if not; the DPI is derived from pixel dimensions.
In my case, I’ve been cropping at 2in by 3in (or reverse for orientation). The resulting “real” image pixel dimensions are still very high (correct to crop size) but the document size reported in PS is 2in by 3in with a wildly high DPI. By changing the resolution back to 300 DPI through Photoshop, the document size returns to normal. Therefore the picture has not lost anything; it appears to only be a function of the Meta data. The pixel dimensions remain constant while the document size and DPI change.
It apears that you canot specify an aspect ratio via the crop tool without defining it in inches or cm. You can do it with the marquee tool but the marquee tool sucks for cropping. You can however crop in ACR with the crop tool by merely specifying the aspect ratio (not in inches or cm). In summary, the PS crop tool is based in inches or cm while the ACR crop tool is simply aspect ratio.
What I can do to crop in PS while maintaining aspect ratio and defined DPI. Is there a work-around, magic trick, or something else I can do to fool the PS crop tool into an aspect ratio not based in inches or cm?

Just to summarize:
Setting a dimensioned ratio (e.g., 2 in by 3 in for Width and Height) in the Crop tool without filling in a Resolution value yields a crop with the desired aspect ratio, and without any resampling.
There is no way to specify a ratio with the crop tool, specifically, as the OP has requested, though in a future version perhaps specifying simple numbers there without any units might be a way Adobe could facilitate this. It would be a nice addition and with little downside.
I guess what I don't understand, though, is why the OP cares about the "high" resulting dpi value? It's just a number.
Expanding on this, the Resolution is nothing but a metadata value that can be changed at will (e.g., through Image - Image Size... - uncheck Resample) at any time in the future. There is ALWAYS a Resolution value associated with the image, both before and after the crop (though the crop tool may end up changing it; so what?). In short, the Resolution is just an arbitrary figure until such time as the user wants to use the image for a purpose (e.g. printing).
Always think in terms of pixel dimensions (number of pixels horizontally and vertically) while editing, then think about dpi right before publishing. It's hard to go wrong this way.
-Noel

How do I control aspect ratio and pixel dimension in iMovie 10

When you created a new movie in iMovie 9 the program would ask if you wanted 4:3 or 16:9 aspect ratio and when you saved the movie it would ask about the size of the file and pixel dimensions. How do I controll these in iMovie 10?

I think they screwed up - but I have solved the problem by deleting it and reinstalling version 9.0.9 which you can get from the support at http://www.apple.com/uk/support/mac-apps/imovie/
Frankly I don't see the point of Theatre and I don't use iCloud so reverting back to a version that actually works seemed a good option!

What is aspect ratio and how can you change it?

Please refer to my other post for more information on these photos. The photos I am referring to are the ones that appear blank in the edit screen.
When I try to export these photos to facebook using the exporter, it says that IPhoto can only deal with photos with an aspect ratio of 3:1 or lower, and that the photos selected have a greater aspect ratio. What is aspect ratio and if possible, how do you change it? This may be directly linked to my other problem with the same pics.

I'm having the same trouble. Zapplications will upload only 1920x1920 photos. With iPhoto I can't get past the automatic ratio of 1920x1440!!! There MUST be some way to customize photo size on iPhoto!! Please help!! I've tried cropping the photo to a square and still can't get past this ratio thing.

Aspect Ratio and Pixel Aspect Ratio

I am importing P2 footage and wondering what my sequence settings should be? As in Aspect Ratio and Pixel Aspect Ratio would need to be? Do I need to ask the DOP what settings on the P2 have been used when filming?

If you have FCP 6 then when you drop a clip into the timeline it will ask you if you want to configure the sequence to match...just click YES.
But you should know what format they shot. Find that out then choose the Easy Setup that matches, and make a new sequence. Or let FCP 6 and 7 do that for you, like I mentioned.
Shane

Lync 2013 client Microphone auto Gain and video aspect ratio settings

I can't disable the auto microphone gain which seems to be regulated by the Lync client.
When having a meeting with video for instance, the microphone of the listening partner (side b) will keep on increasing the microphone gain, until it is on its maximum, because the listening partner is listening and does not make any noise.
When someone on the other side of the room on side b is having a conversation with someone else, the mic gain keeps increasing till side a can follow that conversation, the mic is very sensitive.
This can not be, there is no way to disable the gain in the Lync client, I've tried to disable the right of a program to take exclusive right of the device, without succes.
Why did Microsoft didn't think about this, we need an advanced settings menu where things can be shaped.
Not only the microphone gain is a problem, also the way the video is presented, there is no way to set an aspect ratio, if i'm having a 16:9 screen the video is chopped at the bottem and top of the video of the sending partner, so i'm unable to see the whole
room of the sending side, which is there cause the cam can provide me a nice overview of the side when viewing the local cam at that side, but not with Lync.
We are in an evaluation of Lync, but really getting annoyed by these short comings, in my opinion some basic settings which should be in lync from start. We can not sell these short comings to our employees.
Maybe i'm looking in the wrong direction, if so, please tell me.

Hi,
Sorry for any inconvenience caused. You can try to set
allowing high-definition video, with a resolution of 1280 x 720 and aspect ratio 16:9. For details about HD Video in Lync:
http://blog.schertz.name/2011/10/hd-video-in-lync/
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information
found there. Please make sure that you completely understand the risk before retrieving any suggestions from the above link.
Kent Huang
TechNet Community Support

Confused about pixel aspect ratio and video size

Hello,
I have edited a whole dvd full of video and exported it as MPEG-2 NTSC DV Wide - it says 720 x 480, 29.97 fps. I have brought these into Encore and am trying to make a menu but can't seem to get the menu size right. Since I chose the wide format when making the video, which aspect ratio should I use in Encore? It gives me a choice in the properties menu, but when I go to Project settings it says Codec: MPEG-2 Dimensions 720 x 480. Whenever I bring in a menu background from photoshop, it doesn't fit, and is further complicated by the pixel aspect ratio thing. I have no idea what my background size should be to make it fit properly - the templates seem to all be the 4:3 size. What size should I be using in Photoshop and which pixel aspect ratio?
Is my video codec going to cause me a problem in Encore? I assumed that most tvs nowadays are widescreen (at least not square), so I should do the video wide as well.
Thanks for any help! I am thoroughly confused.

Use a template menu from Encore's library. Then modify as you need. That way you know that it will be the right pixel size and par. You cannot made an incorrectly sized/par'd menu work by setting it to 16:9 or 4:3 in the menu properties. It must be correct, and if so, Encore will usually pick the correct setting.
The Encore project settings for DVD really have no choices: it has to be 720x480 for NTSC. There is no project setting for par. You have to create the menu correctly - just let Encore do that for you by using a template.
Was your video source widescreen? If so, then you'll be fine on your video. If not, you may need to sort that out also.

Video Aspect Ratio Problem

I have a 5th gen iPod video. When I bought it it had a firmware version earlier than 1.2.0, I cant remember which one. When I converted some DVD videos to MPEG4 @ 320x240 and loaded them on the iPod they played great, the aspect ratio was the same on the iPod as when I played them in Quicktime on the computer. Since then my iPod has been updated to 1.2.0 then 1.2.1 and now the video doesnt fit the screen properly. The video is from a widescreen format DVD and if I go to video options and turn widescreen OFF the video height is fine but now the video stretches off the screen. If I turn widescreen ON then the video is the right width but the height of it is "squished" down too small and the people look short and squat. I have since tried reseting the iPod to the original firmware version but it wont roll back, its still stuck at 1.2.1. Does anybody know whats going wrong? or is this still a bug in the iPod software? Please help. Thanks.
Win XP Windows XP

I have no idea if this would have a bearing on it but the FAQ for viewing and syning video with the iPod had some specs related to video and encoding....notice it says 480x480 for MPEG4..Maybe the ipod is doing something funky when it notices the format is MPEG-4 and addresses it differently on the iPod. ie, stretching it out or whatever.. Just a guess
iPod can play the following video formats:
H.264
File formats: .m4v, .mp4, and .mov
Video: Up to 768 kbits/sec, 320 x 240, 30 frames per second (fps), Baseline Profile up to Level 1.3.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, and stereo audio.
MPEG-4
File formats: .m4v, .mp4, and .mov
Video: Up to 2.5 Mbits/sec, 480 x 480, 30 fps, Simple Profile.
Audio: AAC-LC up to 160 kbits/sec, 48 Khz, stereo audio.
I also found some sample Quicktime files on Apples site that you can use to test...http://docs.info.apple.com/article.html?artnum=75424

QT Pro movie aspect ratio and masking

Hello,
This might be beyond the scope of Quicktime Pro. But I'm looking for a way to place a jpg/png with an alpha channel (cut out) into quicktime. Then be able to add a quicktime to be seen through the image. But the kicker is to change the aspect ratio of the movie instead of the still image.
In Pro, I can add a masked image into the movie, but can't control the ratio of the movie and image separately.
I can do this in Final Cut & Final Cut Express but would like to find a way for others to do this with a less expensive or free software.
Any ideas how to change the movie's aspect ratio in QTPro while keeping the mask's ratio the same?
Or is there another open-source software to do this?
Thanks ahead of time,
Adam

A "mask" is just a black and white image file sized to the dimensions of the video.
Adding a PNG (JPEG doesn't support alpha channels) file to the entire video would allow you to adjust both track dimensions independently via the Movie Properties window.

Help with aspect ratio and resolution nightmare

I am currently working on a documentary and all the footage I was given are in different formats an resolutions. Some are in 720 x 480 others in much larger aspect ratios. Some are standard SD some are HD
is there any way to conform all of these together, or any tips? what about exporting? any help would be appreciated.
thanks

What's your final delivery format?
What I do, and I usually have some HDV to mix with DV is to put everything on a ProRes 422 sequence with the setting to the highest resolution I have to start with (usually HDV 1440x1080) but I don't let FCP automatically change the time line or covert anything until I do a render. Then I finally do a render all and FCP up rezzes stuff when it renders. I use very little of the DV stuff (it's a backup when I need something that the HDV cams didn't video the way I need, such as both HDV cams moving to a point of view at the same time).
If you don't need to intercut the various pieces (that is, if you can edit each one as an individual piece in its owns sequence, then just stitch them together end to end at the end), then I create each one in its own sequence, and let FCP change the sequence settings when I drop the video into it. Then I stitch it together when I get ready to make the DVD.
My DVD's are all SD, so I use compressor to downrez and compress: then they are all in the same resolution, etc. and I stitch it together in DVD SP as stories, or just drop them into the same video line, end to end.
Eddie O

Dell 2009w aspect ratio and color issues

I got a Dell 2009w 20" screen for free
it works (kinda) with my iBook G4 by using the Mini-VGA to VGA Adapter
BUT the color is all F'ed up, no matter how much calibration I try
and the aspect ratio is squashed/stretched.
does anyone know of a driver or patch that can be downloaded to fix this?
I'm trying to avoid searching for a new video card

iBookG4guy, Welcome to the discussion area!
No there is no driver or patch.
Also it is not possible to replace the iBook's video card since it is built into the motherboard.

Captivate videos - aspect ratio and skin

Similar Messages

Maybe you are looking for