Captive portal on rv220w?

Hello
Does the cisco rv220w have captive portal like the rv180w does, or will it be supported in future firmware?
Sorry for my bad English
Thanks in advance
Dennis

I've not seem anything in the RV220W firmware, You can setup multiple APs on the router and have a "guest" account for free users, but dont think the is a real captive portal.
Take a look here incase i missed something.
http://www.cisco.com/web/sbtg/gui_mockups/RV220W_v1/home.htm
Regards Simon
http://www.linksysinfo.org

Similar Messages

Automatic disconnection from AP when timed out (session or authentication) from captive portal

Captive portal implementation permits/blocks web traffic. When a user is timed out (authentication & session) it still occupies a channel as seen in the clients list. How can we disconnect a host that is timed out?

There is NO Failed Authenticated list.These are the only available tabs in the lapac1200Captive Portal Global Configuration Portal Profiles Local User Local Group Web Customization Profile Association Client Information

Anyconnect 3.1 Captive Portal False Alert Stops Users Connecting.

Hi All,
I am having problems with a customer's ASA 5505 with Anyconnect 3.1 - it is generating captive portal false-alerts which are stopping users from connecting.
This issue began when I upgraded from Anyconnect 2.4 to 3.1, and it appears like this: A user downloads and installs the Anyconnect client and is able to connect fine, to begin with. However, once they reboot their computer and try to reconnect, the VPN session will not come up and they receive the error message below.
"The service provider in your current location is restricting access to the internet. You need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."
Reading other posts, it seems this message appears when a captive portal is restricting internet access. It must be a false alert in this case as there is nothing of the sort here. Apparently, Anyconnect 3.1 can generate a false alert like so if the name of the firewall's SSL certificate doesn't match the CName listed on the Client Profile. I've set this up to match, to no avail.
Although users can connect by reauthenticating through the SSL VPN login web page, I am stumped as to how to get rid of this captive portal error that pops up when they try to use the Anyconnect client.
Any advice would be appreciated, just let me know what extra details to post if needed.
Many thanks,
Josh Campbell

Hi Joshua,
The below information could be located at
www.cisco.com/en/US/docs/security/vpn_client/anyconnect/anyconnect31/administration/guide/ac03vpn.html
False Captive Portal Detection
AnyConnect can falsely assume it is in a captive portal in the following situations.
•If AnyConnect attempts to contact an ASA with a certificate containing an incorrect server name (CN), then the AnyConnect client will think it is in a "captive portal" environment.
To prevent this, make sure the ASA certificate is properly configured. The CN value in the certificate must match the name of the ASA server in the VPN client profile.
•If there is another device on the network before the ASA, and that device responds to the client's attempt to contact an ASA by blocking HTTPS access to the ASA, then the AnyConnect client will think it is in a "captive portal" environment. This situation can occur when a user is on an internal network, and connects through a firewall to connect to the ASA.
If you need to restrict access to the ASA from inside the corporation, configure your firewall such that HTTP and HTTPS traffic to the ASA's address does not return an HTTP status. HTTP/HTTPS access to the ASA should either be allowed or completely blocked (also known as black-holed) to ensure that HTTP/HTTPS requests sent
There is also a bug filed for this. Just for your reference,
CSCud17825 - Anyconnect captive portal
Regards,
Srikanth K S.

ISE captive portal timeouts and radio policy

Hello!
I have two questions.
First, have some of you guys worked with the captive portal in ISE (guestportal)?
I have set up a new wireless network for a customer and they want to use the guest portal for som users.
The problem that I am expering is that on a particular site with many small buildings user complains that they have to reauthenticate using the webportal when moving between the buildnings.
I have tired extending the idle user timeout on that particular wlan in the cisco 5508, but I still having this problem.
I would actually like if the user login via the guestportal at the beginning of the work day and after say 4-5 hours they have to reautencitcate.
And if they loose network connectivity (moving between buildings, iphone/andriod shutting down wifi adapter, etc) they shuld be fine connecting again because they have aldready authecnticated once during the last 4-5 hours.
Is this possible via the ISE?
My second question deals with 2.4 and 5 Ghz band.
I use AP groups on each of my distribution areas. All groups have the same SSID but diffrenet egress interfaces (interfaces groups).
And in some of these I want to save the 5 GHz band for voice over wlan and in others i would like to use both bands.
Do I have to create diffrent wlan profiles with diffrent radio policys and same SSID or could I do this in the AP group settings using RF-profiles?
Hope for some help!
//Simon

Your first answer is there is no such option in ISE till now there you can specify the login time fix for a client. If the client disconnect from the network and reconnect again, it require re-authentication Every time.
2nd : You can use the AP group settings using RF-profiles to achieve this task.1st: There is no such option in ISE till now there you can specify the login time fix for a client. If the client disconnect from the network and reconnect again, it require re-authentication Every time.
your seconde answer : You can use the AP group settings using RF-profiles to achieve this task.

Laptop no longer loads Captive Portal following Windows 8.1 upgrade

Since upgrading to Win 8.1 from Win 8, I no longer see a captive portal displayed whenever I try to connect to a wireless network that requires additional login information. Some WiFi networks require you to click their Terms and Conditions box
or add some additional logon information and they splash up a Captive Portal screen to allow you to enter the information. Without entering this information I receive an IP address for my wireless adapter ok, but end up with a "Limited Internet"
connection. Which means I cannot connect to the Internet at all. This exact same problem has happened to two colleagues of mine that recently upgraded to Windows 8.1 on their laptops. Any help will be much appreciated.

Hello Grantlsmith,
Do you receive any error message when you connect to a wireless network that requires additional login information?
Or you just connect to the Wi-Fi with limited Internet, and nothing pop up?
Please take the following steps for troubleshooting:
1. Please provide the result of the command ipconfig –all
2. Ping the IP address of URL and check if we can contact.
3. Type in the URL that can use in Windows 8 and check if we can open the Captive Portal
Best regards,
Fangzhou CHEN
Fangzhou CHEN
TechNet Community Support

Infoblox Captive Portal will not pass the "Accept" screen on Iphone or ipad 6.1.2

I am learning there is an issue with 6.1.2 with Captive Portal services where the latest IOS release will not progress beyond the terms and conditions. The next step in the authentricatoin process is certificate check so it would appear Apple has altered the process?
We have a lot of users complaining now but only 6.1.2 is affected. I have checked previous version on other devices and there is no issue.
Thanks
Ken

Anyone? C'mom, I know some of you techie type folks know how to fix this!

Captive Portal not working correctly

I've seen issues with our wireless systems on WebOS devices running the latest software. If I try and use the HP Tablets with a captive portal log on. I can put in my creds to login hit submit, but nothing happens. Reviewing a sniff trace of the transaction I see "you have reached this page because you browser does not support standard http redirection commands"
My concern is most people are probably hitting the same issue based on what I have read thus far.

I am also having trouble with a captive portal on my school's (UC Berkeley) wifi network.
I can get to the login page, and enter my credentials, but after hitting "submit," nothing happens.
The little blue bar loads, and completes, but the page stays the same.
Any answers to this?

Apple TV (2nd gen) Support WiFi Captive Portals?

I can connect to the WiFi but cannot get to he Internet due to the WiFi captive portal. My iPhone/iPad connect fine. How can one do this via Apple TV? Btw, the provider doesn't support a MAC ACL. It's browser login or nothing.

Sorry, AppleTV does not support conncetion via a browser login.

Captive portals not triggering on Mavericks

I frequent locations that require a "I accept your policy, please connect me to wi-fi" screens upon connection, before allowing traffic to leave the local network. Prior to Mavericks, a small browser window would display, prompting me to accept and connect. On Mavericks, I have yet to see one of these.
Here are some pertinent log entries from Console.app:
0/31/13 8:31:26.665 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Inactive
10/31/13 8:32:40.289 AM UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en0: SSID 'attwifi' not making interface primary (no cache entry)
10/31/13 8:32:40.289 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Evaluating
10/31/13 8:32:40.294 AM UserEventAgent[11]: Captive: en0: Probing 'attwifi'
10/31/13 8:32:40.316 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:40.492 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:40.657 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:40.842 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:41.126 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:41.514 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:41.927 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:42.520 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:43.201 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:43.945 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:44.827 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 8:32:44.827 AM UserEventAgent[11]: Captive: [wispr_detect_http_done:269] Network Error: Failed to retry probe. Giving up after retrying 10 times
10/31/13 8:32:44.827 AM UserEventAgent[11]: Captive: [CaptiveHandleRedirect:1653] Unknown result value: 8, assuming online
10/31/13 8:32:44.828 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Authenticated
10/31/13 10:13:46.955 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Inactive
10/31/13 10:14:02.663 AM UserEventAgent[11]: Captive: [CNInfoNetworkActive:1655] en0: SSID 'PANERA' not making interface primary (no cache entry)
10/31/13 10:14:02.663 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Evaluating
10/31/13 10:14:02.668 AM UserEventAgent[11]: Captive: en0: Probing 'PANERA'
10/31/13 10:14:02.829 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:03.005 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:03.187 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:03.369 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:03.653 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:04.039 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:04.513 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:05.096 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:05.766 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:06.549 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:07.421 AM UserEventAgent[11]: Captive: [async_http_read_stream:387] kCFStreamEventErrorOccurred NSPOSIXErrorDomain/51: The operation couldn’t be completed. Network is unreachable
10/31/13 10:14:07.421 AM UserEventAgent[11]: Captive: [wispr_detect_http_done:269] Network Error: Failed to retry probe. Giving up after retrying 10 times
10/31/13 10:14:07.421 AM UserEventAgent[11]: Captive: [CaptiveHandleRedirect:1653] Unknown result value: 8, assuming online
10/31/13 10:14:07.421 AM UserEventAgent[11]: Captive: CNPluginHandler en0: Authenticated
Anyone having similar issues, or can point me towards a solution?

I was able to manually trigger the Captive Portal Assistant and work around the issue. Open up Terminal.app and type:
open /System/Library/CoreServices/Captive\ Network\ Assistant.app
After that, I saw the window I was expecting and I was able to click the "I agree" button, and afterwards my Internet was working as expected.

How can I change the re-direct URL on the WebKit for Captive Portals?

Hi,
I have a guest network at the office that is configured with a captive portal for authentication. My MBP detects that it is behind a Captive Portal when the HTTP WISPr request fails and launches the WebKit (ie. the CNA) as designed and displays the login page. When the login is successful, the Captive Portal displays a success and the WebKit then proceeds to re-direct the browser to http://www.apple.com
Of late, Apple's homepage has become graphic rich and more often than not, loading the page without caching (since the webkit does not cache the webpage loaded) loading Apple's homepage on the guest network takes over 30-90 seconds depending on the traffic on the network. The OS does not allow me to use the network till the page on the webkit has successfully loaded and the "Done" button appears on the webkit and this often becomes irritating.
Is there a method to change the redirect URL to something less resource hungry like http://www.google.com or a less graphic rich Apple page (like http://www.apple.com/library/test/success.html)?
I understand that there is a method to disable Captive Portal Handling, ie.
sudo defaults write /Library/Preferences/SystemConfiguration/com.apple.captive.control Active -boolean false
However, I don't want to disable Captive Portal Handling in the OS as I don't believe Apps that require internet access will handle the lack of the internet well.
Any hints would be appreciated.
Cheers!

Hey again,
I did have a look at it and the Settings.plist file isn't very helpful for the issue I have.
The file defines the probes and exceptions. So you have the default probe WISPr URL in there (http://www.apple.com/library/test/success.html) and the exceptions for specific SSIDs, as an example, attwifi is in the exception list and uses an alternate probe WISPr URL (http://attwifi.apple.com/library/test/success.html). The configuration does not have parameters that would be used by the CNA for the redirect to http://www.apple.com after a succesful Captive Portal login.
Give it a shot on your laptop, get to a random public wifi like ATT Wifi/Starbucks/Guest Wifi's at office spaces/Boingo etc. and after the successful login, your CNA Webkit will re-direct to http://www.apple.com and the "Done" button won't appear till the page has completely loaded and stays as "Cancel" till the page is loaded.

Captive Portal with two or more WAP321

Hello,
I plan to use the WAP321 as a WLAN Hotspot. But I need more than one AP. What is the Design for this?
Do I need to configure every WAP321 with the captive portal and the user need to re-login every time they roam to another WAP321?
Or can I redirect all WAP321 AP to one captive portal?
Thank for your support.
Christian

Nicola,
It may be too late, but with the new version1.0.2.3 software you can create a cluster of up to 8 WAP321's in order to share one configuration. The feature is called Single Point. Here is a paper on the feature
http://www.cisco.com/en/US/prod/collateral/wireless/ps5678/ps12237/ps12249/brochure_c02-717568.pdf

How to redirect https traffic to captive portal?

Any WLC controller model (8500/5508/2504/vWLC) version 7.3 and up..
This is unusual scenario wherein clients have a default homepage to https://www.google.com (sample only)
Typical http web redirection don't have any problem at all. When you open your browser and type http://www.google.com it will redirect to captive portal without any problem.
Is there any way to redirect https traffic to captive portal as well?

redirection only happen on http traffic, a feature request has been issued to have the redirection happen on https.
please check the following
CSCar04580
http://tools.cisco.com/Support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId=CSCar04580
Please make sure to rate correct answers

WAP321 - Captive portal in 2 different VLAN

Hi,
I have a Wap321 installed in my network. IP: 192.168.0.36 - VLAN 1
If I'm in the local area network, I do not have any problem to use the wireless.
I just added a guest VLAN for people who need Internet connection without LAN access. So I setup a second SSID and tag it with vlan 50. I can access to Internet. But If I want active the captive portal, I'm unable to access to it because the adress is in the VLAN 1 (or 192.168.0.36).
How I can setup my Wap321 to have the captive portal in the VLAN 50, not in the VLAN 1?
Thank you
Alex

Hello Alexandre,
If you have a router upstream, please make sure that you have enabled inter-vlan routing in there. Also, on the WAP321, please configure the router's VLAN 1 IP address as the default gateway. With these settings, you should be able to use Captive Portal for both VLAN 1 and VLAN 50.
Hope this helps.
Regards,
Nagaraja

Allowing Airwatch MDM access to the Captive-Portal guest users in pre-auth role for android and BB?

Requirement:
How to allow Airwatch MDM access to the Captive-Portal guest users in pre-authentication role for Android and Blackberry devices?
What is Airwatch MDM?
Airwatch MDM is Mobile Device Management. The Airwatch is an enterprise which helps to manage and secure data traveling through the mobile devices like Laptops, Tablets, Android, iPhones, iPads etc.
Solution:
Why we need to allow access to Airwatch MDM?
The network administrator can force the guest users to register to Airwatch MDM before they get authenticated and access the internet. So that the network administrator could manage the guest devices through Airwatch Management tool. This can be achieved by CPPM server. To download the Airwatch MDM app and register with the Airwatch MDM server certain domains should be permitted in the captive portal pre-authentication role. This KB provides the configuration steps to allow the guest users to download the Airwatch MDM app and register with the Airwatch MDM server.
Configuration:
Below is the configuration
Configuration steps:
1. Create the following netdestinations
netdestination Airwatch
name *.awagent.com
name *.awmdm.com
name air-watch.com
netdestination Google-Play
name android.clients.google.com
name .ggpht.com
name gstatic.com
name accounts.google.com
name clients1.google.com
name clients2.google.com
name clients3.google.com
name clients4.google.com
name i.ytimg.com
name google-analytics.com
name .1e100.net
name android.l.google.com
name mtalk.google.com
name clients.l.google.com
name googleapis.com
name gvt1.com
netdestination BlackBerry
name *.blackberry.com
2. Now define the rules in the session acl and map it to the pre-authentication Role of the captive portal.
ip access-list session Airwatch_Access
any   alias Airwatch svc-http permit
any   alias Airwatch svc-https permit
ip access-list session Google-Play-Store
               any   alias Google-Play any permit
ip access-list session BlackBerry-Access
               any   alias BlackBerry any permit
3. Now map the session ACLs to captive-portal pre-authentication Role as follows
user-role Guest-Pre-Auth-Role
access-list session Airwatch_Access
access-list session Google-Play-Store
access-list session BlackBerry-Access
access-list session logon-control
access-list session captiveportal
4. Now whitelist the list of domain names in the Captive Portal profle
aaa authentication captive-portal Airwatch-Captive-Portal-Profile
white-list Airwatch
white-list Google-Play                                                                                ------------>Netdestinations where you defined the Domains.
white-list BlackBerry
Verification
Now the user will be placed under the "Guest-Pre-Auth-Role" before the authentication. The user can now go the Google Play-Store or BlackBerry Appworld to download the Airwatch MDM and register to Airwatch Management Server.

Thanks so much getting these names listed out. I have been working on this very issue for a few weeks and was basing my firewall rules on IP's. It was not going well. Now access is working and testing can commence!  Thanks,Chris

Bug in wifi/wireless connection with captive portal in UK/London ?

With my macbook pro (10.6.4) & iphone (iOS 4), I do not manage to have an easy connect on free wifi captive portals in London. They all are new connections (unknown networks before).
* dhcpd lease seems to be instable. I can get wifi connection (with good wifi signal strength) but most of the time get a "non-allocated" lease like 169.254.57.x/24 without any router/dns. A few rare times, the dhcp server give a me a complete ip connection.
* in the rare case where IP connection could established, I was not redirected to the captive portal. I had to manually enter its address (in my case <IP>:8000, you need to guess) and even after authentication, I can't browse the Internet. In one of my test, I managed to resolve dns entry but can't browse the web.
I tried during an hour and I couldn't make it on work on my Macbook. work a small time with the iPhone.
tested in McDo free wifi and Airbox Public Wifi of EasyHotel (Airbox system). also have problem with "Wifi Zone - The Cloud".
ok in Starbucks and in St Pancras Free Wifi.
Found these threads which could be related but no real solutions:
http://discussions.apple.com/thread.jspa?messageID=11875166&#11875166
This is probably the router's fault but I can't check this.

Hmm...pretty interesting. What redirection mode did you use for m0n0wall? (http or dns) Have you tried disabling the NAT on the router as well as unchecking the block anonymous internet requests on the security tab?
I have a similar setup on a T1----media converter----WRT54G setup. Basically, the router was able to get public wan ip addresses on the status page. So do the computers behind it (wired and wireless) but they aren't online. We pinged the three dns numbers on the router, only 1 replied. Now, the ISP has Cisco all-access installed on the converter (quite similar to captive portal) and it shows up on every computer when we try to go online. We open up the browser, it prompts for the authentication. We fill-in the details but still it doesn't go online. Bottom line was we cloned the mac of the main computer and they didn't need to authenticate...but then again it defeats the purpose of the software.
Also, the router was set as a DHCP server with NAT enabled. I'm thinking that the router's firewall still blocks your computers even when it's already set as a switch. Try to disable the NAT and see if it works.

Captive portal on rv220w?

Similar Messages

Maybe you are looking for