Captura con Problemas

El problema es que no puedo capturar desde ninguna de mis dos videocamaras ,no es problema de cables ni tarjeta Firewre,el premiere lo desinstale y lo carge nuevamente y tampoco va ,utilice los mismo cables en otro ordenador y no da problemas, Podria llegar a ser un problema de ordenador???, lo extraño de todo es que en los comandos de la captura hay veces que ellos funcionan y otras no pero de lo que si nunca va es la imagen ,esta no se ve nunca.
SI saben algo al respecto, espero comentarios,Gracias.

hola saludos desde mexico. seguramnete es tu tarjeta de video ya que tengo el premiere 6.5 y el cs2 y con 2 videocamras tambien me pasa lo mismo...bueno a mi me pasa que al mom,ento de capturar, se frixzzea o se hacen miles de brincos y queda como captura de robotito....una tristeza y desesperacion...yo me dedico a esto y es la hostia!!!
si alguien sabe la respuesta indicada favor de comunicarnoslo...
obviamnete ya cheque settings de todo y nada de nada!!! gracias

Similar Messages

  • Batch Capture con Premiere Pro 1.5

    No se activa la opción de Batch Capture con lo que sólo puedo capturar de forma manual. Con otras versiones (6 y 6.5) no me ocurría este problema.
    ¿Alguien puede ayudarme?
    Gracias.

    Batch capture en Ppro1.5 es algo diferente que en 6.5
    Desde la ventana de captura (F5) localizas la parte de clip que quieres capturar, marcas inpoint y outpoint y finalmente 'clicas' en Log Clip.
    Esto crea un clip Offline en tu ventana de proyecto.
    Cuando tienes todos los clips creados (en offline) los seleccionas y 'clicas' en Batch capture (F6). Premiere hace el resto.
    Si no queda claro, lo puedo detallar más.
    Saludos
    Lluís

  • I have a 17" Macbook pro with flickering red and cyan(blue) lines across the screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem.

    I purchased my Macbook (17") through a certified apple tecnition in August 2012, it was refurbished and the motherboard was completely replaced. I do a lot of photo editing, but I have been unable to do so because of the red vibrating lines that interrupt my screen. The issue disappears temporarily when I tap on the computer, and the problem does not occur when I use external display or try to screen capture the problem. I brought the computer back to the technition I purchased it from and he said that it was a problem with my fan, so I have two new fans but the issue is still occuring. He says he doesnt know whats wrong. Does anyone have any information on this issue?
    Here is an image of the issue
    http://www.flickr.com/photos/67839707@N08/8884847081/

    I recommend having your Mac serviced by someone competent. A force sufficient to "blow apart" the fans was clearly excessive and may have damaged the display cable, as well as any number of other problems.
    Dust is properly cleaned with a vacuum, preferably one designed for computer service, and they are not cheap.
    Compressed air should never be used. It just blows dust everywhere, often into places where it can no longer be removed.

  • HT1725 Los últimas descargas de música que hice ( O.C "Born 2 Life" y Spoonie Gee "The Big Beat" ), descargaron incompletas y con problemas problemas. Favor de ayudarme a resolver mi problema cuando le sea posible. Gracias

    Las últimas descargas que hice ( O.C "Born 2 Life" y Spoonie Gee "The Big Beat" ), descargaron incompletas y con problemas. Le pedire de favor que me ayuden a resolver mi problema cuando le sea posible. Gracias

  • Log and capture big problem

    I am using FCP 3 (fully registered) i hit the log and capture NOW feature, and the screen brightness drops in half and a message that says I have to restart my computer and freezes up my computer.   The message is in 4 different languages making me think that it may be a computer error rather than a FCP message.
    I deleted my FCP plist file, and the FCP user data,  preference file and the POA cache file. Problem is still there.

    That's a kernel panic - whole system stalling.
    Do you have both FCP 7 and FCP X installed?
    If so, did you follow installation instructions provided by Apple:
    http://support.apple.com/kb/HT4722

  • CS5 DV capture/playback problems  "Feel like I am hitting my head on a wall"

    Ok, I am still trying to get our commercial production editor working as intended so our creative services person can make the full switch to the new machine.  Right now he is half editing on his 7 year old Pinnacle Liquid system that is dying.  My fear is a Hard drive will fail again in that old thing and he won't be ready to fully edit on this New system...
    Up till now in my other posts I have had issues with Playback and capture problems with a Blackmagic SDI card.  Not sure if it is incompatibility with my motherboard or lack of support from Blackmagic but playback was dropping frames if we used GPU acceleration. We also had the problems of pixel shift when doing dissolves on the timeline that are documented on Creative Cow as an ongoing problem that Blackmagic seems unwilling to fix. Also had problems with long format captures....
    My system is currently as follows:
    Asus P6T7 Supercomputer
    i7-950 CPU
    12 GB memory tripple channel
    500 GB 7200 RPM boot drive
    3 1 TB drives in a Raid 5 (2 TB usable space) for scratch  (originally had 4 1 TB in Raid 0, one died and is out for warranty)
    Out of frustration with the blackmagic card, and the fact that we are only editing to/from DVCAM SD, I decided to pull the card and go to a simple FireWire setup as that is what our newsrooms use to DSR-11 and DSR-25 decks.
    Because This editor uses a DSR-1800 full size deck and was always tied to the Pinnacle via SDI/AES, I wanted to stay in that format. This was why I chose the Decklink SDI in the first place.
    I picked up a used Firewire card for the DSR-1800. ($299 off of e-bay, originally a $1500 card)
    I figured if this worked I could sell the Decklink SDI and be about even.
    Now with the Decklink uninstalled and the firewire card connected, we are having new problems...
    The capture from DV works as normal, but when you hit stop on a capture there is a very long delay.. 20 seconds to 3-5 minutes before premiere will pop up the "name this clip"...  this does not happen on the DSR-11/25 decks in news.(they are much slower AMD Phenome II systems with 4 GB memory)
    When I playback to the DSR-1800, it takes the deck 10-20 seconds to switch back to the iLink input.  He switches the deck back and forth to other inputs for dub over from DVD and when he edits on the Liquid system.  once it switches it plays fine....
    Has anyone have experience editing from a DSR-1800 over firewire?  I knew the option was there but have no experience using this setup.
    I don't have any idea what would cause the major delay from the time we hit stop on a capture.  No frames are dropped in the capture window and everything else seems to be working fine.  We are not using deck control just clicking record and play on the deck and then stopping the capture when we are done.
    The other problem, I wanted him to be able to use the $1600 Quadro 4800 video card so all renders would be quick and he would not have to wait like he did on the liquid system (everything rendered...)
    The blackmagic Decklink SDI would drop frames playing out SD-SDI.  I know SD-SDI is uncompressed format and I guess the issue could be just not enough disk speed to feed that output or there is a bottleneck in the PCIe buss.  But now I found that DV does not allow GPU either, so he can't play the timeline with the GPU acceleration on at all.  What a waste of $1600 on that video card if he can never use it!!!!!!
    So as you can see I feel stuck.  Can't seem to get any answers from Adobe or Blackmagic.  now the budget has been slashed for this year and there is probably no chance I can try new hardware on anything...
    At this point I may switch back to the Decklink card and add another hard drive to put the windows page file on. Harm has said load balancing across the system will speed things up.
    My OS disk is much slower as a single 500 GB than the raid 0 was when I used the disk speed test.  Sorry for such a long post but more information should help people know all I am dealing with..
    Thank you,
    Mark

    Darren, I did run that test when we were using the 4TB Raid 0 for Scratch.  The raid was much faster than the boot drive.  I also found that he had some files on the C: drive.  He has a Share on there with Photo's and logo's he works on in Photoshop.
    I am wondering if I should have two Raids.  One Raid 0 with two 250 GB drives for Boot, and then Raid 5 for the other three 1TB drives giving a 2 TB Scratch.   That way there is some redundancy for scratch material. Only problem with that plan is if either Raid0 drive fails I lose the OS/installation...
    Probably follow Harm's Drive setup advice and put the OS on 1 drive and have the Raid 5 for the others but move the Page file to either another spare drive or the Raid 5 array.
    I also think his Media Cache is in the default space(hidden in common files under the user on the C: drive) knowing that is all the conforming audio files and such, it is probably causing the dropped frames when playing through the SDI out with GPU acceleration.  GPU off and rendering always worked other than the shift of a frame when doing dissolves.
    I think that with optimising the services through Win7 and turning off anything we don't need.
    We are on a Domain and that automatically installs the Enterprise Antivirus. Does that cause problems?  Also he runs as a user, should running as an Admin be a must?  The main reason it is on the Domain is so he can have his e-mail accessible but that is not a big issue.  What do you recommend?
    I can remove from the Domain and have this a stand alone machine if that will allow me to turn off more stuff, and stop the anti-virus from running realtime scanning. Is there an antivirus you recommend? I usually like AVG free or Avast, and with these you can turn off the realtime and only have them run while at night when the system is not being used.

  • GF4 AVI Capture/sync problem and solution.

    1.9ghz Athlon, 512MB RAM, 2x80GB hds, G4 ti4400 128MB card, SBLive Xgamer sound card. Win98SE OS.
    Now that I've fixed my Mpeg2 capture in WinProducer 2 and WinDVR, I've still had a problem with raw AVI capture. Audio/video sync is usually off with programs like VirtualVCR, iuVCR and even Adobe Premiere 6 (when it recognizes the WDM drivers at all) irregardless of resolution/sound encoding.
    However, http://www.virtualdub.org/">VirtualDub works perfectly... I've managed to record 720x480 uncompressed or lossless compressed (HuffyUV codec) video with 48khz stereo PCM sound, no sync or frame drop problems.
    Hope this helps. Too bad FAT32 doesn't let me capture more than a few minutes of full video before it hits the 4 GB limit and WinXP is impractical for me to upgrade to.  :(
    Can't win 'em all, I guess  

    Welcome to the forums
    A battery pull is recommended:
    1. Remove the battery while phone is turned on
    2. Wait a few seconds before inserting it again
    3. Allow the long boot up process to finish (takes a few minutes usually)
    This clears most software issues that occur on blackberries from time to time. You could also use Quickpull, a free app that simulates a battery pull without physically removing the battery: http://software.crackberry.com/product.asp?id=27660
    A battery pull reclaims memory lost during application usage and clears minor software errors that creep in over time. The blackberry runs an OS just like your PC runs windows and the battery pull is the equivalent of a reboot/restart on your computer.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Capturing Footage Problem

    Hi
    I am trying to capture 30 minutes of footage from a Sony HC9E to FCP7 I am using an ilink cable and I have changed the settings to AIC. It does work and it does capture the footage but instead of capturing in one bin, once it has finished capturing all the footage there are about 25 bins of footage and some of them have footage only lasting 1 second which are of no use to me.
    These are not start stop points because the 30minutes of footage I shot was continous.
    Any idea's what might be happening?
    Thanks
    Michelle

    Need exact versions of... everything
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link 
    Legacy Driver and Capture http://forums.adobe.com/thread/694890?tstart=0
    - And a Picture http://forums.adobe.com/thread/727755?tstart=0

  • Oracle distrebuted document capture commit problem

    hi,i am working with ODDC v10.1.3.5 using (UCM 11g commit driver) and every thing is going well except one problem that is when i commit to ucm there is a field called(subject) is not commited to UCM even it is maped through the commit driver .
    at the document title field(at Commit Driver Configurations) ,i use it as a compination of multible fields (Name-Subject-Date) ,UCM can see the value of (Subject) Field at this position but at the (subject) field (on UCM) it is empty .
    i dont know what is the reason for this issue ,is it a problem whith the commit driver ?
    any help will be appreciated .
    Regards
    H.Sweiss

    Thanks Jiri,
    I have started with the mandatory metadata fields only. I have resolved the previous problem.
    It was because Client Access folder was not properly set.So the .pak files was still residing in the client access folder.
    But now all batches are present in the Batches folder and the logs says
    eg: 07/13/10 04:48:10 PM 19360358_19360532 extracted into C:\Program Files\Oracle\Document Capture\WebPages\ClientAccess\19360358_19360532.
    07/13/10 04:48:10 PM Start processing DS19360358. File Cabinet: captureDocuments; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
    07/13/10 04:48:10 PM Client Version Number: 10.1350.26.
    07/13/10 04:48:11 PM DS00000000000023 (ID: 24) created in captureDocuments with 1 pages from DS19360358.
    07/13/10 04:48:11 PM DS00000000000023 (ID: 24) is committed, number of documents: 1, total page(s) committed 1.
    07/13/10 04:48:11 PM Post processing batch DS19360358. File Cabinet: captureDocuments; Batch ID: 24; Create User: TEST; Modify User: TEST; Computer Name: MUKESHLT1\MUKESHLT1; Create Date: 7/13/2010 4:45:57 PM; Modify Date: 7/13/2010 4:48:52 PM.
    07/13/10 04:48:11 PM 19360358_19360532 deleted.
    07/13/10 04:48:11 PM
    But it is still not sending to UCM.
    Is there any setup to commit these batches?

  • Capturing Data Problems

    I'm TRYING to capture DVCpro 50 (24p) from a SD93p deck (not SD930) into FCP 5 on my G5. The computer sees the deck, and I can run it through the FCP capture window, but every time I actually try to capture any clips, it errors out saying that the computer "encountered a problem reading the data on your source tape". I have tried more than one tape, and had the same results, so it's not the tapes. Also, it appears that the timecodes don't match up between the tape and FCP either. I believe it's a streaming problem but can't figure out how to fix this. HELP!

    Nicole,
    welcome to the forum.
    One of the things new users may not understand is that you should keep all your posts relating to a single issue together in one thread. Adding new threads about the same problem only dilutes the response and confuses the issue.
    I'd suggest if you have new information or have tried new things, post it to your original thread: http://discussions.info.apple.com/webx?128@@.68bc076f
    cheers,
    x

  • DAC: Change capture sql problem.

    Hi,
    DAC 10g, SEBL_VERT_80
    This is for vanilla code. When I right Click S_OPTY-> Select Change Capture Scripts->Generate Change capture SQL -> Incremental
    I am getting the
    Select * from Dual
    It suppose to generate all truncate image table and create view script right. Whats wrong with the Configuration
    Please help.
    Suresh

    Thanks Srini,
    Sorry we have patched all our environments with following patch.
    Dac Build AN 10.1.3.4.1.patch.20110427.0538, Build date: April 27 2011.
    If i have to apply the new patch. i have to do it in all environments.
    Its working in all other environments except one having problem.
    Anyway I have re-installed DAC and it fixed the problem. I dont know what caused this problem.
    Its shame that i have to re-install it, this is not recommended, this is not best practice.
    Regards
    Suresh
    Edited by: slella on 04-Mar-2013 08:26

  • Acrobat con problemas

    Tengo instalado el Adobe Creative Suite, funciona todo bien menos el Acrobat, cuando trato de abrir algún documento en pdf se me cierra y no permite trabajar.
    Gracias por la ayuda que me puedan brindar

    Hola, Edmundo.
    No conozco iText, así que por ese lado no puedo ayudarte. Por otro lado, haces una confusión con los nombres de programas de la familia Acrobat, lo que no nos facilita las cosas. Y por último, das muy pocos detalles específicos.
    En los foros en inglés hay una pregunta frecuente que describe síntomas como los que tú mencionas. Está aquí:
    Simon ATS, "4.1-- PDF pages don't appear in web browser window (Acrobat 4-7.x)" #1, 5 Jul 2005 7:39 am
    Si tienes problemas con el inglés, te sugiero pasar el texto por cualquier programa traductor. El resultado distará de ser un castellano aceptable, pero estoy seguro que podrás entender el contenido. En todo caso, te hago notar que las soluciones dependen de las versiones de los programas usados.
    En cuanto a la coexistencia de programas, la posición oficial es que en Windows no se soporta la mantención de dos o más versiones del
    Reader (el programa gratuito). Extraoficialmente se dice que se suele tener suerte si se han instalado en el orden cronológico de sus versiones, y siempre que no se haya eliminado ninguna versión con posterioridad a una o más instalaciones. Aparentemente el problema no se presenta en Macintosh.
    Espero que alguien más ilustrado te pueda ayudar más una vez que proporciones información suficiente.

  • Capturing Video Problems

    I am using Final Cut Studio 5.1.4 and attempting to capture film from a Sony video camera. I have a 4 to 6 firewire cable connected from the video out of the camera to a firewire port on my dual 1gb power pc. When I open a file in PCP and choose to capture the preview screen opens but says "Preview Disabled".  FCP recognizes the camera as I am able to fast forward, rewind, and stop the camera. When I press capture now I get a notice that there is no video to capture even though the camera is playing video. I tried trashing and re-installing FCP but that did nothing to solve the problem? I have captured video hundreds of times in the past?????
    Roger
    [email protected]

    Michael, thank you for your reply.
    We have the latest FCP on other computers but need to capture this for someone who only owns the older version of FCP. We are using a Canon XL1s to capture with which is the same camera the project was shot on. We have used the Easy Setup DV NTSC 48 KHZ which in the past has worked with the same camera and film. No matter what I do the log and capture window says preview window disabled. The only window I know of that could cause this is in the log and capture audio window where there is a box which needs to be checked for the log and capture window to be active. It is checked. The log and capture window still recognizes the camera as we can rewind, fast forward, pause, and stop the camera from the log in window controls. When you press capture now with the camera playing video it says there is no video to capture????? Went through the manual several times before posting and the manual fails to address this problem?????
    Roger

  • Sysprep and Capture TS problems

    I am trying to capture the image of a reference machine I have in VirtualBox. I am working in MDT 2012. The first pass on this I initiated the process from the CMD window starting the LiteTouch.wsf from in the scripts folder. This worked to a point, sysprep
    worked, the VM was rebooted but this failed (VirtualBox Manager failure). I restarted the VM and the PE started and got to creating WIM and a very slow agonizing window showing the percent done. It got to 6% and stopped. I did see the WIM file getting built
    but it only got to about 1.3GB. Next I tried the same VM, after recreating from a backup, and this time tried booting from a LiteTouch CD as I read is preferred in MDT2012. This failed at Sysprep. Below is the failure report.

    Are you using a slow network connection to capture the image? You should have the VM configured for GigaBit between the VM and your MDT Server.
    I have had problems with MDT re-running and getting confused when the target *.wim file already exists. Try deleting from the host if you have problems.
    IF you still have problems, please post the bdd.log and smsts.log file to a public site like onedrive, and copy the link here.
    Keith Garner - Principal Consultant [owner] -
    http://DeploymentLive.com

  • Premiere CS4 capture tool problem

    Hello there,
    I am experiencing a weird problem with Premiere CS4. I am not able to capture DV footage from my Sony DSR-PDX10P. When I open the Capture window (F5), it's working very slowly compared to anything else with the software. If I have the camera connected through firewire, it most often crashes. It does recognize the camera and if it doesn't crash, it states "stopped" but fails to show the footage when I run it. Preview screen stays black. A few times I have managed to get a record command through, whichafter Pr states "recording" but the counter stays at 00:00:00:00 and afterwards gives me "No frames were recorded" or a similar message. Anything I do within the Capture window happens like 5-10 seconds after I've given a command.
    I know the problem isn't firewire-related, because OnLocation CS4 works like it should. DV footage from the camera can be watched and recorded without a problem. And the .avi files recorded in OnLocation open up in Premiere nicely. Otherwise Premiere is working just fine.
    Possibly the strangest thing is that less than 2 weeks ago I used the capture function with the same camera without any problems. The only thing in my setup that has changed since was the installation of Microsoft Silverlight (which sucks but I needed to watch a video that required it - stupid move though). I have tried uninstalling it and opening a restore point before it was installed - without an effect.
    I know I CAN still record footage through OnLocation, so this is not lifethreatning. I'd still prefer Premiere and of course would like to know what the hell is wrong with the capture tool. Or whatever the cause may be.
    (Btw, another problem I have, more of a sidenote here but if someone would have an idea, has to do with AE CS4's RAM preview - it works once just fine, then crashes. Haven't had any problems with that before and it also worked like it should a few weeks back. Wonder if these two problems (AE and Pr) could be strangely connected? I've tried different settings (with and without OpenGL, Prevent DLL Address Space Fragmentation and different CPU/RAM level combinations) without effect - and again, with the settings I had it did work a few weeks ago)
    I've started a thread once before with a CS4 problem so if need be, you can check my (unchanged) hardware data here: http://forums.adobe.com/message/2488816#2488816
    I'm eager to hear if someone would have an idea. Thanks!
    Greets,
    luukki

    See if one of these works better...
    SD capture http://windv.mourek.cz/ or http://www.scenalyzer.com/main.html
    Do note that the demo version of ScenalyzerLive puts a watermark in the files it creates
    - I'm told that the OLD version is freeware... check the download page for details

Maybe you are looking for