Capture ALV container event and change data in screen header

Hi,
I have a REPORT calling a custom screen with a header section and an ALV container displaying ITEMS.
<b>Situation:</b>
If I use the FILTER button on the ALV container, it works fine but I wish to capture the details, so that I can change my header data accordingly.
<b>Example</b>
e.g : Suppose the ALV container on the screen displays 4 lines of data.
So my header area displays '4' as the no of items displayed
Now when I use FILTER button on the ALV container, it then dispalys only '2' lines of data as per the filter criteria. Now how do I capture this details so that my header now displays 2 instead of 4.
Basically I want my HEADER data to get refreshed whenever I use the filter button to change the number of data lines dispalyed.
Hope I make some sense with the example.
Appreciate if you gurus could help ..
Thanks and Regards
RK

Can you post your code.
Regards,
Rich Heilman

Similar Messages

Creation and Change Date for Tcode and Function Groups

Hello All,
I need to display the Creation and Change Dates for Custom Tcodes and Function Groups in a Report. Can anyone please let me know the logic of retrieving it.
regards,
Mahesh

Hi,
TADIR and TRDIR is the tables where you can find all these data
Regards
Sudheer

My iPhone 4 is Turning of and changing dates. How I can solve it?

My iPhone 4 is turning off and changing dates Aline also. How I can fix it ?

If the basics from the User Guide have all been tried (restart, reset, restore from backup, restore as new) and you still have problems, then you've done all the troubleshooting you can do. You'll need to bring your phone into Apple or an authorized service provider in your area.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

How can I create a matrix question? Specifically, I need a question in table format that allows each respondent to list a number of events and then data for each event (date, location, number of participants, topics covered, etc.

Hi,
Sorry, we do not support a matrix-question field. Please try the multilines text field (where your participant can enter multiple lines in the input text box) and see if it works for you.
Thanks,
Lucia

I have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP :(

i have a macbook 2011 and its booting to the apple with a loading bar. it gets halfway and changes to a screen with the apple and a spinning circle. It spins untill it dies. will not boot to safe mode. Do not have orriginal osx disk either.... HELP

It happened after an update

Changing date (and sequence) of events by changing dates of photos no longer seems to work. Any idea what to do?

I am scanning in old slides and negatives (from the 1960s and 70s), and I want to get the resulting "events" in sequence from when the photos were taken, rather than when they were scanned. So I have been changing the dates of the photos, and previously this resulted in the associated event moving to the proper sequence. This definitely worked a month or so ago, both with prints scanned in on a flat-bed scanner, and also with slides and negatives scanned with a Veho scanner. That was faulty, however, and so it has been replaced with a Plustek 7500i scanner, using SilverFast scanning software, and importing the resulting images into iPhoto. I have recently tried to change the dates of the resulting events, and it doesn't seem to work as it used to. There has been an update to iPhoto 9.1.3 since my earlier success.
Take for example one event, CS73A. Hovering over the event in the "All events" display gives dates of 1 Apr 2011 to 2 Apr 2011; these are the dates the slides were scanned in. If I open the event and choose the Info tab, it gives the event date as 02/03/1973 (which is the approximate date that I changed it to). I had done a batch change on the event this time, so the date and time on the first slide is 2 March 1973 09:30:48. Each successive slide is 1 minute later, and the last is 2 March 1973 10:08:48 (38 slides). I asked for the dates in the files to be changed as well.
I don't know what I'm doing that's different from before. The only things I can think of are (a) something has changed in the iPhoto update, or (b) the SilverFast software stores the scanning date in some part of the EXIF that iPhoto can read but not change. I don't have tools to examine the EXIF unfortunately.
What to do?

Chris, I have run into the same problem.
Try this:
Open an event with more than one photo in it.
Adjust the date of one or more photos. The event date does not update.
Delete any one photo. The event date now updates to match the above date change.
Undo the delete photo. The event date stays matching.
Change the date of any photo again. The event date updates now every time.
If you close the event and reopen it, you have to start over with the delete one photo thing.
I don't understand it but it works here.
I also have had the problem of events not sorting themselves in order of the dates when VIEW, SORT, BY DATE is selected. This seems to affect only the events were photo date changes had been made. Using the delete thing seems to keep the events in order.
Another funny thing: When I put photos into iMovie the times in iMovie show as 7 hours off the photo time.
I think Apple owes us an update to iLife!

Creation and Change date in T Tables

Hi
When entries are made in SAP tables like T001 , T001L ,T001W etc. Creation of company code, plant is there a creation date , change date maintained ?
Where can i retrieve this information from? Preferbly an SAP table
-Dexter

The dates are recorded in tables only if the "Log data changes" checkbox in SE11->Table display -> Technical settings is checked.
The logs are maintained as documents in CDPOS and CDHDR maintains the date and time.
If you are creating a Z-Table and want to have such a log, you can create timestamp fields (date and time) and modify at runtime during database update.
Hope this helps!
Cheers,
Shailesh.

Lightroom changes file date (build and changeing date) by jpg files

Hallo
I am using Lightroom on Mac OS X Snow Leopard. The Problem is that Lightroom changes both dates of the file (the date when the file was build and the date when you have made changings on the file) when i save the Metadates to the file.
This happens only by jpg files. By raw / xmp files is the date of the raw file not changed, the both dates of the xmp are also changed like by jpg.
I want not to change the time when the file was build. So that i can see in the Finder / Explorer when the file was build ( Photo taken).
How can I solve this Problem.
Thanks for Help

Do not save the metadata to the files. It's quite unnecessary to do so, but of course, you should have full backups of the images and the catalog(s) [.lrcat].

How can I detect Form Open event and Import data event ?

We are using Adobe Designer 7 and Adobe Reader 7.0.5. When we open a Form, Initialize event is being called. Similarly when we Import any data, initialize event is being called. At the Initialize event, I want to know whether it is caused by Opening the Form (or) Importing the data. Please respond as we were completely stuck up with this issue.

My screenshot was only an example how you can approach the issue. I wasnt saying that you should try it with AI....
Just take a closer look into the DAQmx Events and you will discover something like this:
hope this helps,
NorbertMessage Edited by Norbert B on 10-05-2007 02:35 AM
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.
Attachments:
DAQmxEvent.PNG ‏11 KB

How to get and put data in HTTP header in Client Side

One JSP's function is to display data records page by page. Client users could click "First page" or "Previous Page" or "Next Page" or "Last Page" button to let the JSP to show the corresponding page. So the JSP must remember the current page number. Due to there are a number of client users maybe access the JSP at the same time, keep the current page number in session, there will be a lot of session is created at the same time, this will impact system's performance. So using session to keep data method is not used. I plan to use request header and response header to pass the current page number. I know use the response.addHeader to put data in response header and also know use request.getHeader to get data in request header in server side, but I donot know how to put data in request header and how to get data in response header in client side. Could you please give me a help? If donot use these method, are there any other method? Thanks a lot.

Why not pass it as a parameter with the URL?
at the beginning of the page..
<%
int pageNumber = Integer.parseInt(request.getParameter("page"));
%>
then when defining your links
<a href="thisPage.jsp?page=<%= (pageNumber-1)%>">Previous</a>
<a href="thisPage.jsp?page=<%= (pageNumber+1)%>">Next</a>

Move and event and change to-do date?

I use OmniFocus, so on Monday morning, I'll open iCal to a flood of To Dos for the entire week. These are all just day dates, not specific hours. I then drag/drop those To Dos into my daily schedule so I have a nice daily hour by hour breakdown. For example, I'll take "To Do Tuesday" and drop it Tuesday at 3:00-3:30PM.
Sometimes I'll notice a day filling up more than I might like, and I'll move "To Do Tuesday" from Tuesday to Thursday.
Where I'm hitting a hitch is, the To Do that I originally drag/dropped to create that Event for "To Do Tuesday" still has the original To Do date of Tuesday and does not update to Thursday when I move the event.
Is there an iCal setting I'm missing, a 3rd party app, or an arcane spell I could cast that would make the To Do update in this fashion?

Just wanted to ask again and see if the weekend crowd had any ideas. Thanks.

Where (drive, folder, file name) are the database files that store catalog information such as tags and changed dates in Elements 13?

I want to backup just the datebae file that holds catalog data. I can't find it in Elements 13 but could in Elements 10. Is it hidden in a secret file with a secret name? Why?

The catalog is a folder containing the main database (catalog.pse13db), the thumbnails cache (thumb.5.cache) and other files and subfolders. To save a catalog, you save the whole catalog with its subfolders. Note that if you don't save the thumbnail cache (which is the biggest item in the catalog), it will be rebuilt automatically.
In all versions of Elements, Win or Mac, you find its location from the menu: Help/System information.
By default it's in a hidden folder in Windows.
Why? I don't know, but you can tell the Windows Explorer to show hidden files. That's up to you; I always do that.
Should the catalog always be in the default location? Not at all. You can move it elsewhere. For instance you can hold your image library and your catalog to an external drive. Then, the catalog manager shows it as beeing in 'custom location'.
The following is not in your question, but I assume you are asking that for backup purposes. If you have an external backup system, you should include the catalog folder. That is not enough if you want to restore to another computer or drive because the original is dead. The catalog stores the picture files location with reference to the path, but also to the internal serial number of the drive. Changing drive means that all files will be shown 'missing' or 'disconnected', and you'll have to run a 'reconnect' procedure. You don't need the reconnection if you use the internal backup/restore process in the Organizer.
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
If you are not in the situation of a crash, but you simply want to update (includinge updating PSE version), the integrated system is ideal.
Other backup systems have their advantages. I do use Windows SyncToy after each significant editing session, and the Organizer backup at regular intervals.

How do I get events and changes created on my IOS Calendar to show up on iCal using iCloud?

Using iCloud I can sync my events from iCal right to my IPod Touch. This is great except for the fact that I rarely create events on iCal. I usually create events using the Calendar app on my IPod Touch because I always have it handy and I feel that has a much more intuitive UI. I was really excited about iCloud being able to sync my events from my IPod to iCal but it doesn't seem to be working. When I create events on iCal they sync to my Calendar right away, but when I create an event on my IPod it doesn't show up on iCal. The same is true for changes made on my IPod to events synced from iCal. the changes don't show up in iCal at all. HELP PLEASE!

The operating system should read 10.8 - sorry...

SSRS Line graphs, change the axis maximum and minimum by month, and change data series from calendar year to financial year

I am using SSRS and I cannot access SQL server to answer my problem, so the solution needs to be done via SSRS only.
I am currently trying to graph some data. The problem is, the months on the X axis are aligned by calendar year. I need the first month to commence with July, with the last month on the axis to be June. This also means that the year series need to be changed
from calendar year to Australian financial year.
Screenshots are provided in the comments.

Hi Northern,
Per my understanding that you want to show the month in the x axis as the order of the financial year(7,8,9,10...4,5,6) and also display the year in the series group as the financial year, right?
I have tested on my local environment and we can modify the query in the sql to get the financial year value based on the fields of Calendar year, details information below for your reference:
1. Modify the query as below:
SELECT
Calendar_Date,CASE WHEN MONTH(Calendar_Date)>=7 THEN
YEAR(Calendar_Date)+1
ELSE YEAR(Calendar_Date) END AS Financial_Year,
MONTH(Calendar_Date)as Financial_Month,
Billing_Amount
FROM TableName
order BY
Calendar_Date
2. Add the "Billing_Aomount" in the Value area, "Financial_Month" in the Category group area and "Financial_Year" in the Series group area.
3. Right click the "Financial_Month" under the Category group to select the "Category group properties",click the sorting and add below expression in the Sort by to specify the order for the month in the x-axis:
=switch(Fields!Financial_Month.Value="7",1,Fields!Financial_Month.Value="8",2,
Fields!Financial_Month.Value="9",3,Fields!Financial_Month.Value="10",4,
Fields!Financial_Month.Value="11",5,Fields!Financial_Month.Value="12",6,
Fields!Financial_Month.Value="1",7,Fields!Financial_Month.Value="2",8,
Fields!Financial_Month.Value="3",9,Fields!Financial_Month.Value="4",10,
Fields!Financial_Month.Value="5",11,Fields!Financial_Month.Value="6",12)
4. Preview you will get the sample chart display as below according to my sample data:
If you still have any problem, please feel free to ask.
Regards
Vicky Liu
Vicky Liu
TechNet Community Support

Export to pdf and change "Data points"

HI,
I use discoverer 9.0.4 and I want to know how to export to pdf in viewer.
And how to change the name "Data Points"
thank you

Mr. Met wrote:
I don't even know where that is. This is the only screen I see:
Here's a QT Movie of what I'm doing wrong.
I watched your movie... all your are doing is changing the settings for the gray device. If you want to convert your document from color to grayscale, you need to pick one of the color devices (RGB or CMYK) and convert it to a gray profile. Under the Profile popup menu, pick a gray gamma.

Capture ALV container event and change data in screen header

Similar Messages

Maybe you are looking for