Capture and IVIEW

Hi all,
I have quastion?! is there any restriction to capture  URL and add it to iview??
Because im trying to add page with multi iview each iview will have just logon section (login box which contains user name,password and ok buttom) i did  capture some of the url and they wok fine without any problem but some other iview doesnt seem working i mean iview has the logon box which captured from url but when click on OK buttom nothing happen  seems like OK is deactive.so im not sure whats wrong ??!! can any one help pls

Please guys any help still have that problem .
Im not sure if i explained it good

Similar Messages

  • Capture and Export of Mono Audio in FCP HD

    I have just upgraded to FCP HD from FCP 3. My problem is all of my audio needs to be Mono only. In v3 this was simple I just chose Mono from the capture settings and Mono for Export.
    On FCP HD I can't find any way to capture and export as Mono. When I record Voice Over in FCP all I get is the right channel and even when I set it to pan centre it still only comes out the right speaker after export.
    If I've got to manually duplicate tracks everytime it will take me forever.
    Anybody know a simple way to capture and export Mono only (the same for both Ch 1 + 2)
    G4 DP 1.25   Mac OS X (10.4.6)  

    This might seem the long way 'round but it may save a ton of time in the end.
    Do your FCP mix in stereo as Colin suggests, then take the final audio track into STP or Peak and do a "mix to mono" and then save a new AIFF file with the resulting mono clip.
    Then bring that back into FCP on a new audio track, line it up with the stereo, then either disable or delete the stereo tracks. This will give you a true mono audio track.
    But where are you going with this content that will handle mono audio? DVDs require a stereo AC3 files. Are you sure you really need a mono sound track?

  • Problems in sound capture and JMF deployment

    Hello:
    I am new to JMF.
    I made an applet using JDK 1.3 on JBuilder 5. This applet captures and plays audio. When I run it through JBuilder's IDE, it runs fine. But when I run it independently, the applet's GUI appears but sound recording doesnn't work. Remember that I have JRE1.4.2 and JMF2.1.1e installed on my machine.
    When I installed JMF, I enabled the recording, and file writing options for an applet.
    To further check the problem, I ran it through JMF debugger. There I found that it says that ,
    <permission javax.sound.sampled.AudioPermission "record";> is not enabled.
    To enable it I added this entry in java.policy. This allowed the audio capture to work.
    But my question is,
    1. Why isn't this entry present by default in java.policy?
    2. Even one of my user entered this entry in java.policy, but was unable to capture audio.
    3. I want my applet to be running with different users having different versions of JRE,JMF and browser settings. How can I do this, without asking my user to do anything? I simply want that when my user downloads this applet, I should provide him with some installation file that installs JMF as well as configures everything on the system in a way that he can use this applet easily.
    Haven't you guys faced such problems in deploying JMF stuff?
    I'll be grateful for any help.
    Thanks
    Jami

    Hi.
    I am facing very similar problems: it looks like deploying JMF with Java Applets is really a challange!
    On my own test installation, if I enable audio capture and file writing for applets through the JMFRegistry, then I am able to record audio from my test applet, even when executed in the target web browser.
    Nevertheless, how to deploy the applet in such a way clients won't be required to manually install JMF and enable audio capture and file writing through the JMFRegistry?
    It looks like the JMF Customizer is able to produce a custom JAR also embedding user preferences for audio capture from applets and file writing , is this correct?
    Any help would be greatly appreciated.
    Regards,
    Marco.

  • CS3 - Video freezes on Capture and Playback - Please Help!

    Hello all,
    Here's the problem:
    When Capturing footage via firewire from Mini DV, shot in standard DV, within a standard NTSC-DV Widescreen 48k Project, the picture freezes after 1 second.  The audio can still be heard and the footage actually does get captured.  However, after the footage has been conformed, and we load the clip into the Source Window and hit play, the video again freezes after 1 second of play.  Again, the audio keeps playing and you can move the marker anywhere on the clip and see that all the footage is indeed there, but as soon as you go to play it from any point - same thing, the picture freezes after 1 second of play, making editing impossible.  The clip is being captured as an .avi and all capture settings appear to be correct.
    Here's the kicker:
    - HDV video captures and plays back fine.
    - The DV video captured correctly at first, this has been a recent problem going on now for several weeks, after no changes to the system.
    - The biggest kicker - after trying successfully to capture, playback and edit HDV video, we closed Premiere, reopened, tried to play the previously captured DV footage and it played just fine suddenly!!!  Then we closed the program, re-opened and tried again - back to the freezing problem and it never played back fine again...
    Here's the specs (I can give more specifics later if needed, it's my partner's computer):
    Sony PD-150 DV-Cam (but recording on Mini DV in standard DV mode, not DV-Cam)
    Windows 7
    Intel Core i7 3.20 ghz
    Asus X58 Motherboard with onboard Audio and Firewire
    6 GB Ram
    Nvidia Geforce 9 Series with PhysX
    Please help if you have any idea how to solve a crazy problem like this.  Thank you!!!
    Greg

    Now that everything is working, make a full drive image to an external USB hard drive
    I use http://www.terabyteunlimited.com/image-for-linux.htm

  • Image Capture and Preview "folder not writable" error importing to shared folder

    I'm running 10.8.5 on a Late 2012 model Mac Mini. I'm trying to create a folder under my home directory where my wife can import pictures using Image Capture or Preview while logged into her account. I've tried setting permissions on the folder by setting POSIX permissions and ACLs from the command line, and also by setting ACLs using Get Info in Finder, but it seems as though both Image Capture and Preview ignore the ACLs and instead rely solely on the POSIX permissions for everyone/other (even when a relevant group is set). Unless the POSIX permissions for everyone/other are "rwx" Image Capture and Preview both give an error that the import failed, and /var/log/system.log shows errors that the "folder is not writable". I'd like to be able to set this up without making the folder and the files in it writable by everyone. My understanding was that ACLs should take precedence over POSIX permissions, but even the POSIX permissions don't seem to be getting handled properly, because the group is ignored. Any help or explanation of what's happening would be appreciated.
    Here's an example with details:
    Suppose we have the users alice and bob. We want to set permissions on the directory /Users/bob/importdir such that Alice can import files from a camera there using Image Capture (or Preview, either would do), but don't want to relax the permissions more than necessary.
    We create a group named bob_and_alice
    We set the following permissions on /Users/bob:
    POSIX: rwxr-xr-x, owner=bob, group=staff (i.e. default POSIX permissions)
    ACLs:
    0: group:everyone deny delete
    1: group:bob_and_alice allow list,search,readattr,readextattr,readsecurity
    2: user:alice allow list,search,readattr,readextattr,readsecurity
    "Get Info" shows "Read & Write" for bob and "Read Only" for alice, bob_and_alice, staff, and everyone
    We set the following permissions on /Users/bob/importdir:
    POSIX: rwxrwxr-x owner=bob, group=bob_and_alice
    ACLS: (these are already probably more permissive than should be necessary)
    0: group:bob_and_alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
    1: user:alice allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,re adextattr,writeextattr,readsecurity,writesecurity,file_inherit,directory_inherit
    "Get Info" shows "Custom" for both alice and bob_and_alice, "Read & Write" for bob, and "Read Only" for everyone
    Alice opens a Terminal and cd's to /Users/bob/importdir. Alice can create and delete files in this directory.
    Now Alice opens Image Capture and with our camera connected we try to import a photo to /Users/bob/importdir. Image Capture shows an error dialog with the text "Import error. An error occurred while importing. The item 'foo.jpg' was not imported." /var/log/system.log shows the message: "Jul 20 22:12:34 computer_name.local Image Capture[32804]: Document destination folder is not writable" If instead Alice uses Preview it shows an error dialog with the text "The selected folder is not writable" and /var/log/system.log shows two error messages:
    Jul 20 22:23:45 computer_name.local Preview[33280]: Document destination folder is not writable
    Jul 20 22:23:45 computer_name.local Preview[33280]: Encountered error during image import: Error Domain=com.apple.ImageCaptureCore Code=-9934 "The selected folder is not writable" UserInfo=0x7ffda4881f00 {NSLocalizedDescription=The selected folder is not writable}
    Now we change the POSIX permissions on /Users/bob/importdir to: rwxrwxrwx
    The import succeeds with both Image Capture and Preview
    Can anyone explain what's going on here? Is there another reasonable way to do this without, moving this shared directory to /Users/shared?

    Did you figure out how to fix this?

  • Excise duty /quantity capture and post

    hi
    i did MIGO for particular material. I cannot maintain condition and j1id for that material. But vendor send me Excise invoice for that .Then how i will  capture and post the quantity and duty now?
    i cannot cancel MIGO bcaz stock is consume through quality managment.
    help me
    sunil

    Hi Sunil,
    maintain J1ID for that amterial and capture the E.I. with ref to material document with t-code J1IEX
    Hope this will resolve ur query

  • Excise duty capture and posting..?

    Hi all
    Can anybody explain me about , excise invoice capture and posting ..
    What is capture and posting excise invoice in CIN..?
    1.When we capture excise duty..? were it wil go
    2.When we wil post the same..? were it wil go
    Thanks
    sap-mm

    HI,
    Capturing Excise invoice means you are updating excise register Part1 on quantity basis.(Inward movement of goods like purchasing of raw material.)
    Posting the excise is updated on value basis, in this RG23part2 rgister is been updated .it has financial implication.
    Example:
    In MIGO transaction itself, you can post Excise by choosing Capture and Post Excise Invoice. The FI document will be as follows:
    RG23A Basic Excise Duty A/c Dr
    RG23A Education Cess A/c Dr
    To CENVAT Clearing A/c
    After doing MIGO, you execute MIRO. In this transaction also, SAP will generate FI document automatically. The entry will be as follows:-
    GR/IR Clearing A/c Dr
    CENVAT Clearing A/c Dr
    VAT Setoff A/c Dr
    To AP-Vendor A/c
    Regards,
    Biju k

  • Hello apple guys, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    hello apple guys, after installing OS X Mavericks, i can't open app store, reminders, contacts, mail(crash), maps, Image Capture, and other apps that comes with Mavericks OS, how i can solve this problem?

    So is this the way Apple works now? Not solving customers problems? I'm sure so many users have had this problem. I've had, and I reinstalled Mavericks 3 times. Works fine for some days and then several Apple Apps stop working. Is that a way to force us ti update to Yosemite? (I don't want to) and then pay to update some third party programs (i.e. Pro Tools). Also, there are so many 15" MacBooks Pro with graphic problems and of course the guys at the Apple Service Centers always say: "It's the logic board, you can have it replaced, but it's so expensive I would recommend a new Mac".  I really, really miss Steve Jobs!

  • Image Capture and Preview have trouble finding scanner. Photoshop no problem.

    Image Capture and Preview have trouble finding the scanner wirelessly unless it is on when the Mac starts up. Photoshop finds the scanner no problem. Any suggestions for Image Capture or Preview?
    The scanner is Canon MP620. Mac is MBP, running 10.8.2
    I have done all the uninstall, reinstall, update drivers, etc. Please don't bother suggesting that stuff.
    Thanks.

    As for the scanner - so is this new one wireless? When I hooked up my Epson All-in-One, I had to install it via USB first before I could install the wireless (per their instructions).  With Snow Leopard, I simply installed the driver and it covered and recognized both the print and scan function - not so in Lion; I had to go through hoops with the scanner part and it finally showed up as a separate unit. I thought that is silly, but - as long as it works.....  I'm trying to think of possibilities since I'm about out of ideas, so you might want to consider that (if it applies). The other troubleshooting suggestions usually include redoing the "add" function after a reboot.
    As for Image Capture, I am out of ideas. FWIW, I never use it - in my workflow, there is no need for it. Not sure if this would have an impact, but make sure that you choose Image Capture in the CDs&DVDs Preference Pane (mine is set to ignore or ask purposely):
    If that does not work, I'd suggest reinstalling the OS over the top of what you have.

  • How to transport roles, pages and iViews in the PCD from DEV to QA

    Hi
    Please would someone telll me how I can transport/move roles, pages and iViews we have created in our own area of the Portal Content Directory from our Development to our QA portal environment.
    Kind Regards
    Claire

    Hi,
    Please check help.sap.com.
    http://help.sap.com/saphelp_nw70/helpdata/en/c5/56599164d0c04cb566ba0e2d7ed55c/frameset.htm
    Your Basis/NetWeaver consultants can help you.
    Regards,
    Masa

  • How to display an USERID on  "Portal Activity Report - Pages and iViews"

    HI,All.
    I have a question.
    It is as follows.
    A purpose&#65306;
    iView of EP is used and called for contents of the WEB-AP server of various (Tomcat(Java)).
    The acquisition of "EP login user ID" is difficult from the log of each WEB-AP server.
    It wants to acquire information on "Which iView which EP login user how many times executed?" by using EP, and analysis/to use it.
    A present specification&#65306;
    "Only information on "Number of users using iView" can be acquired in this function
    though "Page and iView of portal activity report" of EP was verified to achieve the above-mentioned purpose.
    It is impossible to analyze it, that is, "Which user ID used iView?".
    A question&#65306;
    In "Page and iView of portal activity report"
    How should I do to display "Which iView how many times did each EP login user execute?"?
    Or, I want to know if there is a table with the informations.
    Environment&#65306;
    EP6.0&#12288;SP18
    OS:WindowsServer2003 EE sp1  rc2
    CPU:Xeon3.2GHz x2
    MEMORY:4GB
    HDD:36GB*2
    Other:Clustering
    Thanking you in advance.
    matsu.

    Hi,
    You can try Setting the 'Monitor Users' property of the pages to 'Yes'. We did this for one of our portal but there seem to be a slight performance trade-off.
    Please award point if helpful.

  • My videos only download into image capture and they don't show up in imovie because image capture wont let me download in photo,event,face ect... so is there anyway i can get it to go to imoive please help!!!!!!!!!

    My camra is a canon powershotA40000IS

    In iMovie, click FILE/IMPORT/MOVIE and navigate to the folder where Image Capture stored your movies.
    If that does not work...
    Open iPhoto, and click FIle/Import To Library and navigate to your camera.
    You can also click on your camera in Image Capture and set it to automatically open iPhoto, if you want.

  • Accounting document not created at the time of capture and post excise duty

    Hi
    Accounting document not created at the time of capture and post excise duty
    Please explain what the reason
    Regards,
    Channa

    reloved myself

  • Distributed Document Capture and date fields

    Greetings!
    We are using Oracle Distributed Document Capture and Universal Content Management as repository, it works fine. However we defined a custom metadata field with data type "date" in UCM and we defined a scan profile with its asssociated date field and the problem that we have is when we are using the distributed document capture client and the user selects a date from the calendar and send the document, the commit process fails with the following error message :
    The field 'xxx' does not contain a valid date.
    However If the user types the date field as "29/01/2009 00:00" the commit process works fine and the document is stored on UCM.
    My question is how to enable the calendar on the Distributed Document Capture client in order to enter a valid date with format "dd/m/yyyy hh:mm"
    Thanks!

    Thanks for your answer I set the property "Automatically assign a Content ID on check in" Should I specify the minor revision label and the major revision label?.
    Because I set just the "Automatically assign a Content ID on check in" and now I got the following when I am scanning documents:
    ***Error*** Failed to process batch 01354425_01354446. Error Number: 40011, Error: Failed to commit batch (with delete). Commit Profile - ucm: Document file already exists. Commit is configured to abort. Document File: \\svrdocumentos_ejc_ejercito_mil_co\batch\00J\0000000D\0000000D_1.TIF
    The good news is the previous error "Error Number: 40008" is solved
    I really appreciate yor help.
    Thanks.

  • Distributed Document Capture and UCM commit issue: 302 Moved Temporarily

    I am installing and configuring Oracle Document Capture and Oracle Distributed Document Capture to commit documents to Oracle UCM.
    I am unable to commit documents to UCM because of the following error: "302 Moved Temporarily". What can be wrong with my configuration?
    Error log from the ODDC:
    Wed Dec 15 10:20:14 CET 2010 INFO Document file name is D:\oracle\Document Capture\Batches\001\00000001\00000001_1.
    Wed Dec 15 10:20:14 CET 2010 INFO Begin Check In Process.
    Wed Dec 15 10:20:14 CET 2010 INFO Idc service = CHECKIN_UNIVERSAL.
    Wed Dec 15 10:20:14 CET 2010 INFO Parsing xml to obtain fields data.
    Wed Dec 15 10:20:14 CET 2010 INFO dDocTitle: oddc.
    Wed Dec 15 10:20:14 CET 2010 INFO dDocType: Application.
    Wed Dec 15 10:20:14 CET 2010 INFO Field DocAuthor: weblogic.
    Wed Dec 15 10:20:14 CET 2010 INFO dSecurityGroup: Public.
    Wed Dec 15 10:20:14 CET 2010 INFO dDocAuthor: weblogic.
    Wed Dec 15 10:20:14 CET 2010 INFO dDocAccount: .
    Wed Dec 15 10:20:14 CET 2010 INFO primaryFile: D:\oracle\Document Capture\Batches\001\00000001\00000001.1.
    Wed Dec 15 10:20:15 CET 2010 SEVERE Failed to check in document. Exception: {0}. Error is: oracle.stellent.ridc.protocol.http.HttpProtocolException: HTTP/1.1 302 Moved Temporarily
         at oracle.stellent.ridc.protocol.http.IdcHttpProtocol.writeRequest(IdcHttpProtocol.java:171)
         at oracle.stellent.ridc.IdcClient.sendRequest(IdcClient.java:140)
         at com.oracle.capture.UCM11g.Driver.checkIn(Driver.java:192)
         at com.oracle.capture.UCM11g.ComDriver.checkIn(ComDriver.java:42)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.IDispatchServer.invoke(SourceFile:209)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source)
         at java.lang.reflect.Method.invoke(Unknown Source)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.b(SourceFile:232)
         at com.jniwrapper.win32.com.server.CoInterfaceVTBL$VirtualMethodCallback.callback(SourceFile:135)
         at com.jniwrapper.Callback.enterPoint(SourceFile:222)
         at com.jniwrapper.Function.invokeCFunc(Native Method)
         at com.jniwrapper.FunctionCall.a(SourceFile:126)
         at com.jniwrapper.FunctionCall.call(SourceFile:34)
         at com.jniwrapper.Function.invoke(SourceFile:188)
         at com.jniwrapper.Function.invoke(SourceFile:212)
         at com.jniwrapper.win32.MessageLoopThread$LoopThread.run(MessageLoopThread.java:489)
    Error log from the WLS - UCM_server1:
    ####<2010-12-15 10:23:52 CET> <Info> <ServletContext-> <???> <UCM_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <8857620d73b0a621:-7e6d4fca:12ce951b643:-7ffd-0000000000000045> <1292405032703> <BEA-000000> <Failed access to redirected secure URL>
    I am using Oracle Distributed Document Capture Release 10gR3 and Content Server 11g Release 1.
    I configured the Oracle UCM 11g Commit Driver:
    user: my_user, password: my_password, Server URL: http://localhost:16200/cs
    When I am trying to commit a batch I am getting the following response:
    HTTP/1.1 200 OK
    Cache-Control: no-cache
    Date: Wed, 15 Dec 2010 09:33:06 GMT
    Content-Length: 664
    Content-Type: text/plain; charset=utf-8
    Set-Cookie: IDCCS_SESSIONID=yycVNLLSL1hJ3P2mQkQrjss7XLZY23r8vFbt2n4wTj7VJ2c9xQ01!-1355344816; path=/; HttpOnly
    X-ORACLE-DMS-ECID: 0000IndO3b39_aW5Pzw0yd1D28UE00000t
    X-Powered-By: Servlet/2.5 JSP/2.1
    <?hda version="11gR1-11.1.1.3.0-idcprod1-100505T121221" jcharset=UTF8 encoding=utf-8?>
    @Properties LocalData
    IdcService=PING_SERVER
    ClientEncoding=UTF8
    UserTimeZone=UTC
    UserDateFormat=iso8601
    addAlert=1
    ActAsAnonymous=1
    dUser=anonymous
    blDateFormat=yyyy-MM-dd HH:mm:ssZ!tUTC!mAM,PM
    refreshSubjects=
    refreshMonikers=
    changedSubjects=
    refreshSubMonikers=
    blFieldTypes=StatusMessage message
    RedirectUrl=/cs/
    changedMonikers=
    idcToken=
    IsJava=1
    @end
    @ResultSet USER_ALERTS
    3
    alertId
    alertMsg
    alertUrl
    csWeblayout8dot3Error
    <$lcMessage('!csWeblayout8dot3Error')$>
    @end
    @ResultSet UserAttribInfo
    2
    dUserName
    AttributeInfo
    anonymous
    account,#none,15,role,guest,15
    @end
    HTTP/1.1 302 Moved Temporarily
    Date: Wed, 15 Dec 2010 09:33:06 GMT
    Transfer-Encoding: chunked
    Location: http://localhost:16200/cs/login/login.htm
    X-ORACLE-DMS-ECID: 0000IndO3c19_aW5Pzw0yd1D28UE00000u
    X-Powered-By: Servlet/2.5 JSP/2.1
    0113
    <html><head><title>302 Moved Temporarily</title></head>
    <body bgcolor="#FFFFFF">
    <p>This document you requested has moved temporarily.</p>
    <p>It's now at http://localhost:16200/cs/login/login.htm.</p>
    </body></html>
    0000
    The Request:
    POST /cs HTTP/1.1
    User-Agent: Java; Stellent CIS 11g
    IdcVersion: 11.1.1
    Host: 127.0.0.1:16200
    Content-Length: 124
    Content-Type: text/hda; charset=UTF-8
    IsJava=1
    <?hda jcharset=UTF-8?>
    @Properties LocalData
    IdcService=PING_SERVER
    UserTimeZone=UTC
    UserDateFormat=iso8601
    @end
    POST /cs HTTP/1.1
    User-Agent: Java; Stellent CIS 11g
    IdcVersion: 11.1.1
    Authorization: Basic d2VibG9naWM6d2VibG9naWMx
    Host: localhost:16200
    Cookie: $Version=0; IDCCS_SESSIONID=Z2ZpNLQbKchmg2tVB5fpQLL2pPphT4BFX18GJPbkqkxMxLVMhbLZ!-1355344816; $Path=/
    Content-Length: 28963
    Content-Type: multipart/form-data; boundary=67xMPN-krvICaGSzKNTkd02u8MLyarA
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="IsJava"
    Content-Type: text/plain; charset=US-ASCII
    1
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="ClientEncoding"
    Content-Type: text/plain; charset=US-ASCII
    UTF-8
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="IdcService"
    Content-Type: text/plain; charset=UTF-8
    CHECKIN_UNIVERSAL
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="UserTimeZone"
    Content-Type: text/plain; charset=UTF-8
    UTC
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="UserDateFormat"
    Content-Type: text/plain; charset=UTF-8
    iso8601
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="dSecurityGroup"
    Content-Type: text/plain; charset=UTF-8
    Public
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="dDocAccount"
    Content-Type: text/plain; charset=UTF-8
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="dDocAuthor"
    Content-Type: text/plain; charset=UTF-8
    weblogic
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="dDocType"
    Content-Type: text/plain; charset=UTF-8
    Application
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="dDocTitle"
    Content-Type: text/plain; charset=UTF-8
    oddc
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="DocAuthor"
    Content-Type: text/plain; charset=UTF-8
    weblogic
    --67xMPN-krvICaGSzKNTkd02u8MLyarA
    Content-Disposition: form-data; name="primaryFile"; filename="00000002.1"
    Content-Type: application/octet-stream; charset=ISO-8859-1
    ˙Ř˙ŕ<file content....>

    "302 Moved Temporarily" is a web server error (I googled it - see e.g. http://www.checkupdown.com/status/E302.html)
    Two recommendations that you can try:
    - do not use 'localhost' - use computer assigned name, or at worst IP address
    - in my system, Server URL is set to http://ecm-base:16200/cs/idcplg (from ODC). Try to modify yours accordingly.

Maybe you are looking for