Capture camcorder dv video

I'm not sure how to transfer video from my camcorder to my imac. From iDVD help, and from these discussion, it looks like there are answers for much more specific questions, but all I'm trying to do at this point is transfer the video to my computer. With a memory stick in my camera, I get an icon on the desktop when I connect the camera via a USB cable. With video, using a fire wire connection on a dv cable, I can't figure out how to transfer it. How do I do this?
thanks
tjerman

Start by bringing it into iMovie:
http://www.apple.com/support/imovie/import/
While there is a OneStep feature with iDVD, I don't think you should do that if you're asking how to import. I avoid OneStep.

Similar Messages

Will QT Pro Capture High Definition Video?

Does QuickTime Pro have the ability to capture high definition video? I have tried to do this with a Canon HV10 camcorder, but have not had any luck. I have been able to capture the video using iMovie HD 6.
Thanks
Kurt

Does QuickTime Pro have the ability to capture high definition video?No.

Capture Audio and Video to different disks or not?

I thought that capturing audio and video to separate disks was more efficient, now I see in the FCS 2 documentation it says that this is not recommended for any of the DV formats. But it does not say why, or what the consequences of doing this are...
Does anyone out there know?
Thanks,
Pete d.

Peter Durso wrote:
Now, Is there any value in putting the render files on a drive that is separate from the Capture disks?
Pete D.
Absolutely. Listen to your drives while doing an intense render. The Capture drive is grabbing all of the video clips in the stack, the system drive is grabbing software. If you render to the Capture drive, that same drive has to write, too. Reduce the load by using a Render drive.
I have four drives: System, Capture, Render, Output. The last is used for all exports, encodes, and transcodes.
bogiesan

How to capture or save video files or trailers in to apple tv thru intern

hi
i Hvw purchased apple tv .in that iam unable to see trailers only and iam unable o save the video file in the apple t.v every time has to connect the internet to see the video file is there any setttings to do plz tell me friends .iam waiting to ur reply how to capture or save video files or trailers in to apple tv thru internet

when there is 40 gb h.d.d is it not possible to capture the videos or songs all the time i have to connfigure the dhcp settings or resetting to factory defaults
then only iam able to play the trailers your answer is little clear to me my dear frnd plz dont mind can u help me some extra points to hti sappale tv

Capture audio and video files to seperate files

Forum,
Having suffered problems with OS 10.5 and Quicktime 7.4.1 I have done a clean install with 10. 4 .11.
When I select capture the following notice appears
"Audio only capture selected,video preview disabled"
In system settings "capture audio and video to seperate files " is NOT checked.
But that may not mean the same as the statement in in the capture window.
I have searched HELP and a book called" Optimizing your Final Cut Pro System" but can not find an answer.
Advice would be appreciated.
Thank you
Michael Craven

Hi,
Check this:
in Log & Capture window select Clip Settings tab and make sure video box is checked.
Cheers,
G.

Capturing audio and video .....

Hello everybody, I'm new to the world of Adobe Premiere Elements, a source present. I have a pavilon pc hp m9040n, Windows Vista Premium 32-bit, Adobe Premiere Elements 3.0. I want to capture audio and video on a DVD, the pilot is set to DV / HDV and the HDV format in the acquisition and says that the peripheral acquicision is not online. The same happens when I connect a video camera Hi8 Sony. Can help to solve this?, Thank you very much.

It sounds like you are having problmes capturing from two separate cameras. What are the manufacturers and the exact model numbers please? Also, how are these cameras attached to the computer, i.e. FireWire cable into the corresponding FireWire port on the computer?
It sounds as though you are attempting to do the Capture from within PE3. Is this correct? If so, what is the order that you connect the cameras, turn them on, their settings and the order that you launch PE3, and also the Capture module of PE3? Might be something there.
Good luck,
Hunt

Capturing live streaming video?

I just bought Quicktime Pro for the sole purpose of recording streaming video to my hard drive. (Win XP) I watch a nest cam in a barn owl nest and want to be able to record the stream during the night so I can see what I've missed. (I'm not noctural the way the owls are.) However, I cannot find a way to do this. When I add the URL, QT tells me it isn't valid. When I click on the stream window to look for a way to copy it, nothing comes up. I am admitedly new to video streaming and hope I am making a simple mistake, but I sure would appreciate some help. Many thanks, Kate

QT Pro for Windows does not include video capture. It can capture audio but not video. Check this page under the words Upgrade Now:
http://www.apple.com/quicktime/player/win.html
In contrast, a similar page for QT for Macintosh mentions capture of both video and audio:
http://www.apple.com/quicktime/player/mac.html

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

How do I route audio from a YouTube video to AU Lab using SoundFlower so that I can capture the YouTube video's sound stream?

Attach camera via USB or put card in card reader.
Go to FCP, and go to the Log and TRANSFER window.
If FCP recognizes the card, you will see your clips listed on the left.
You can view them, set Ins and Outs, and import just what you want.
Once you choose a section of video and import it, FCP converts (transcodes) from its original camera format to Apple ProRes422 - a more edit friendly video file.

Transfer JVC GZ-MG505 camcorder recorded videos to iPhone 6

Hello, I have a second-hand camcorder: JVC GZ-MG505, which is a very old camcorder. I recently recorded a clip of video with this camcorder, and want to import the video to my newly purchased iPhone 6 plus. When I try to sync the video to my iPhone 6

Hello, TinaBj, in order to give you a professional answers, I specially checked your camcorder's technique specs, only few answers I can get, one possible way list on http://www.modconverter.net, which give a brief answer that your camcorder recorded videos as .mod. If so, you can try iMovie to convert .mod to .mp4 or .m4v first, Then use iTunes to sync your video clips to iPhone 6. Hope it works.

Capture and Record Video - Helppppppp

my application capture video from a web cam using WDM.
when i start my record video function, i got a message "capture device in use".
how can i capture and record video at same time ???
is there anybody there that can send me an example????
thanks a lot..

There was an example that does this: AVTransmit3.java, try some googling.
If you do not find, go to: http://www.cs.technion.ac.il/Labs/dsl/projects/JazzEnsemble/completed_projects/IpCTalk.htm
download the exe file, install it with the source (custom) and have a look at
MonitorStream.java
MonitorCDS.java
CaptureUtil.java and InitVIdeo.java

What extenstion will allow me to capture streaming audio/videos?

I am trying to capture a streaming video of a program broadcast by Fox News which is not protected. I understand that in the past versions of Firefox some of the extensions or free applications would allow the video to be captured (per CNET). What is the application or extension I need to capture streaming videos using the FLV format or any of the other popular formats?

Hi Pat,
What I want to do is download the on-line videos/live streaming video but the source of them doesn't make them available as download files.
As regards Flash Player Pro, apparently I was looking at something else entirely. Sorry for the misleading statement.

How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - to capture a steeaming video played with JWplayer?

How can I capture / download ( save to my PC) a JW PLayer Video that is being broadcast - I wish to capture a streaming video that is being played with JWplayer?

Hi there
Likely you will need to capture using a different tool than Captivate. Then you might save in a format Captivate understands (such as FLV or SWF) then insert that into Captivate.
Cheers... Rick
Helpful and Handy Links
Captivate Wish Form/Bug Reporting Form
Adobe Certified Captivate Training
SorcerStone Blog
Captivate eBooks

Edit Capture Time of video files

Is it correct that I am still not able to adjust the capture time of video files? This makes no sence to me. I adjusted a group of photos (because of traveling to a different time zone). Now the video files are still in the wrong time zone. Please fix!

Agreed this feature really should be present in LR4 with all the new video capabilities. As John pointed out, it's one of the most basic features.

Capturing on screen video

Does anyone know whether apple has an application to capture on screen video?
I know about the "Grab" application that allows the user to capture elements of the screen.
Is there an application that would capture on screen video?

There is an app called 'Display Eater' which I have used for demonstrating some issues I have had while beta testing an application, this should be able to record onscreen activity but I don't know the quality of a recording of a movie.
Remember to respect copyright on anything you might want to record.
http://www.apple.com/downloads/macosx/video/displayeater.html
Hope this helps.

Can Multiple Speakers (faces) be captured in Pres10 Video Express?

Greetings,
Can Multiple Speakers (faces) be captured in Pres10 Video Express?
Thanks,
A

I have not tried in Presenter 10 but in version 9 below worked.
if you hook up different web cam models (meaning not the same model x 2 or x 3 but totally different models) you can use multiple cameras and "switch" between them by using the pause function on the keyboard while recording videos. An example. Use 2-3 web cams that are all HD cams but different models (Logitech 920 HD is a good choice for this plus one or two other Logitech HD models). You can then record with say your main camera pointed at you, pause the recording, choose a camera that is over your shoulder for a "see what I am seeing on my monitor" as an example and then switch again to a third camera for a profile view of yourself.

Capture camcorder dv video

Similar Messages

Maybe you are looking for