Capture cards to use with JMF....

Hello, I need to buy a video capture card to use with JMF in order to get a video signal and send it using a stream channel.
Somebody can help me and post a list of compatible capture cards with JMF?.
I think on buy a PINNACLE 500 PCI but i have read that it is incompatible with JMF.
Thanks.

Creative webcam live should work, most webcams will work... at least under Windows. I've 2 older creative webcams that work under Windows.
Not sure about Linux support though...
Ps. there's a Java Media Framework section of this forum, where all the JMF related questions should be posted.
regards,
Owen

Similar Messages

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Video capture card to use with WebEx

Hi all,
could someone share a list of compatible video capture cards to use in a PC in a WebEx session?
The ideia is to use an external camera (instead of a web cam) to capture the video and I would like to know if this input will be sent as video (if WebEx will recognize the capture card as an input).
Thanks
Regards

thanks for the advice and links... I was having trouble making sense of barefoot.
I have heard that a card that works well for gaming will not necessarily work well for CAD based programs like Maya. can any one confirm or deny this? I can use the software for things like this but I am pretty low on the food chain when it comes to hardware issues.
It is possible I being too picky wanting an affordable card that:
a.) Has been tested successfully by Autodesk with Maya
and
b.)is available to be installed in a Mac Pro
....comments?

Re: msi x99 gaming 9 ack does not detect capture card when using with xsplit

I concur with all of badboy2k's thoughts. He puts forth a very good explanation, and it makes sense.
I'd get the power supply out and get a good branded power supply (Seasonic is my preference at this time)....

I have a MSI z87-GD65 and I cannot get the computer to reboot.
I am on a fresh windows 7 install.
Specs
i5 4690k
EVGA GTX 670
EVGA 750w
G skill 2x8gb 2400
samsung 250gb ssd
Did:
Latest bios update from msi
CMOS reset
Latest Intel ME driver from msi

Many of the times my Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore but still not working.. please help me..

My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..

Please do not double post a subject. Iphone 5S I answered your other thread.

Can I buy a new ipd that takes a sim card to use with my local carrier? They only sell the ipad 2.

Can I buy a new iPad that uses a sim card to use with my local carrier? They only offer the iPad 2 for sale.

A quick Google search shows Union Wireless is GSM. Buy the AT&T version (GSM) iPad. You don't have to purchase iPad 2. You can purchase the newer iPad from Apple or Best Buy, or even Walmart. In either case, you get a micro sim from Union Wireless, purchase a data plan and enjoy.........

What is a decent sound card to use with DJ Mixer Pro?

I'm having trouble finding a compatible external sound card to use with my Mac Mini. Specifically, I need one that supports surround sound to use with DJ Mixer Pro. I am currently unable to use the "Preview" function of the program during my sets to ensure proper blending from one track into another. I've gotten pretty good at working around it, but with the proper sound card I should be able to preview a track in the "rear" of the surround sound without disturbing the "front", which plays live to the crowd. Most information I can find on sound cards pertains to home theatre application, which I have no interest in. I also don't need anything too sophisticated as I use the program for local club performances instead of professional production. I would prefer something that connects through firewire to prevent any kind of delay, but most of these seem to be discontinued or expensive overkill, so I hope a USB 2.0 will suffice. Any help would be greatly appreciated!

http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Found this page, helped a lot

HT201209 can the same gift card be used with a differencet itunes account?

can the same gift card be used with a differencet itunes account?

No, a gift card can only be redeemed onto one account - it can then only be used to buy items for that account (it can't be used to gift content to another account).

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u

Do I have to have a capture card to use FCP?

I'm considering laying out the dough to upgrade from FCE to FCP but I noticed that the apple site says I have to have a "support 3rd partycapture card". I'll admit I'm green on what that means.
I currently import all my video media directly from my sony z1u via firewire.
Does the firewire import negate the capture card requirement?
If not, can someone recommend the necessary capture card for a Mac Pro 2.66?
thanks in advance...
-James

No, you'll be fine with just standard FireWire, capturing HDV (of DV if your downconvert in the camera) from your Z1U.
If you were to use any other (more expensive) capture card, to maybe capture uncompressed HD from the component outputs of your Z1, the image quality won't be any better, as the image is compressed to HDV to be recorded on tape.

Which Capture Cards has SDI with 4 inputs

Need to record speaker with four cams. Need to the ability to record live the four SDI feeds into Mac Pro with FCP Studio 2. The boss would like the ability to do live editing/post and when the speaker finishes to render a master DVD within 15 to 30 mins. Then have the DVD copied using the replicator DVD system.
Is any of this possible? If so, what type of Mac Pro would I need to buy and which capture card(s)?
Current Equipment:
Cam 1: JVC HD250
Cam 2: Mobile unit - JVC HD250
Cam 3: Sony 3CCD BRC-300
Cam 4: Sony 3CCD BRC-300
Panasonic switcher: AV-HS300 with SDI inputs
HP 8400 with XP Pro, 4GB, 2X500GB, Nvidia FX1500 and Sony Vegas 8.0 Pro

Hi
If Atheros said its has a 1394 connection so I assume it means the firewire.
The IEEE 1394 means the firewire connection which is available on this notebook.
Anyway, the WLan is not available and if you want to use the WLan technology on your notebook so you should use the USB WLan stick. This is the simplest way to connect to the wireless lan.

Can NI 6601 (PCI, 4-channel) card be used with Lookout 5.1?

I need a fast counter like NI 6601 PCI Card to work with Lookout 5.1. Is there any driver for this card? Any other computer card like this one can be used with Lookout?

No, the NI 6601 cannot be used with Lookout. The reason is because Lookout uses the the NI-DAQ OPC server to communicate with DAQ devices through virtual channels, but you cannot have a virtual channel for a counter. Therefore, counters (such as the 6601) cannot be used in DAQ OPC, and hence cannot be used in Lookout. The following KnowledgeBase discusses this topic:
http://digital.ni.com/public.nsf/websearch/505D2E9A1617B5F686256A1B00574777?OpenDocument
LabVIEW would be an excellent software option for counter applications using the PCI-6601.
Regards,
Jeff M.

Capture a several streams with jmf?

i want to capture streams from 4 USB webcams in the same times.
it's possible with JMF? and how?
the JMStudio know just one capture device, if i link 2 webcams i capture just one stream?????
please if you have solution send it to me,
think you!!

I think you don't have problems, because you should query the JMFRegistry, and you'll obtain the list of all multimedia devices installed in your system.
Also, I suggest you a visit to Solutions section, look at "monitor.zip", there are some interesting files, regarding query of JMFRegistry. Good luck. :)

Best eSata card for use with G-Tech G-Raid mini2? weibetech no work

Hi there,
I recently purchased a brand new G-Tech 640GB G-raid mini2. I specifically purchased the drive to take advantage of the esata port. I edit video and need the throughput speeds for HD footage. Currently, I'm using the Weibetech Express/34 esata adapter to run the drive but it's not working. The information I received from the very helpful people at Weibetech, was that Silicon Image who makes the chip that runs the card, are not updating the drivers to work with my operating system. 10.5. Both apple and SI are aware of this issue.
Question I have is what card will work with the computer and the drive? Has anyone had the same or similar issue? Maybe the G-Raid drive isn't the way to go. Anyone have a better suggestion for speed when cutting video on a MBP?
Thanks

I wonder why the G-Speed Q (From G-Technology) which uses the same 936 chip is benchmarked at a much slower speed using there $300 RAID card. According to G-Tech "The G-SPEED Q write speeds are about 165MB/s, and the reads are about 215MB/s." with RAID 5.
Hi,
I have not tested the G-Speed Q.
I can tell you 936QS based enclosures tend to be very performance sensitive to the model of hard disk installed and the eSATA driver used. This is why performance results can be amazingly different when the 936QS is used with various drives and eSATA controllers.
Its not like a direct connect 4-bay enclosure where you see much less difference in hard disk performance when different 3.5" SATA hard disk models are used.
In my tests, the Hitachi 1TB provided some of the best 936QS performance I have recorded. In addition, FirmTek has optimized the SeriTek/2ME4-E driver version 6.0.0fc18 to enhance 936QS performance. This combination is able to maximize the performance available with the 936QS design.
I hope this information is helpful.
FirmTek Support

Blackmagic Intensity Pro Card - Best Use With HDV

Hello
Given the choice should I use my Blackmagic Intensity card on my Mac Pro to capture HDV footage via HDMI or YUV Component. Or should I stick to firewire.
The card was initially bought for realtime previewing whilst editing HDV footage in FCP. My plans are to connect the card to a 21" LCD monitor via HDMI connections.
One of the Panasonic reps told me to stick with YUV as it does not compress the footage during the transfer stage as much as firewire?
Is this true?

With all due respect, your Panny rep was on crack.
Capturing over Firewire — whether it's DV or HDV — is a raw-data-stream copy from the tape. It's not actually a video operation at all; the signal is in no way changed. It's just copied from the tape directly into your computer.
Going out of your camera or deck via the component analog ports will give you lower-quality results than transferring over Firewire. Whether you can tell the difference depends on what kind of footage you're capturing.
Another point to keep in mind is that HDV is 1440x1080 with non-square pixels. Capturing it either via HDMI or component analog scales the footage to 1920x1080, introducing some softness in the image. This softness is even worse in the chroma channels, since HDV is only 4:2:0 to begin with. It's better by far to keep your footage in its native format throughout the editing process. If you're going back out to an HD digital master or to an HD tape, you can decide whether to scale to 1920 at that point. If you're shooting on HDV to deliver on SD DVD or over the Internet at less-than-full HD resolution, you're better off staying in 1440x1080 forever, never scaling up to 1920, and just doing a single down-scale at the end.

Capture cards to use with JMF....

Similar Messages

Maybe you are looking for