Capture Dates Displayed Icorrectly. Impacts using MAP feature of LR4

I have a folder of images taken with two cameras. I copied the folder to use with LR4 Beta and imported the images. Many (but not all) of the images for the Cannon S100 have the wrong time and some times the wrong date. When I look at the files with Windows Explorer, capture date is correct, likewise, when I look at the dates on another computer with LR3, the date is correct. This is very critical, as I used the GPS with the S100 to mark where pictures were taken by the Nikon D300 on our vacation.
This is a critical failure.

No there is no consistency. However, the only images that have the incorrect date were taken by a Canon S100, and this is the first time Adobe supported the S100. BTW: How can one correct the date and time an image has for capture time. These pictures were originaly imported by LR3, release canadate 6 on my laptop. The interesting thing is the date and time are correct there and I recopied the files from the laptop to my home computer with the same results. If someone wants one of the image files, I can provide it. It is a RAW file.

Similar Messages

Unable to capture data from Serial port using LVRT2010 in single core pentium 4 machine

I am using application written in Labview using windows Labview
Runtime environment 2010. Application creates a tunnel to intercept data from
Serial port.
My problem is, Currently, I am using single core Pentium
processor. When I am trying to intercept the data between COM1 and COM7 (COM 7
is a virtual port) it is not able to capture data.
When I am running Labview RT environment using dual core
processor machine it is running normally. I wonder whether it could be the compatibility issues with
single core Pentium processor.

Hi Magnetica
Are both of the machines running the same runtime engine,
drivers ect?
Have you had RT applications running on this
machine before?
Is the development computer a 64bit machine?
The processor is a supported model (See link below).
http://zone.ni.com/devzone/cda/tut/p/id/8239
Regards
Robert
National Instruments UK & Ireland

USING MAP FEATURE

When using the Map feature on my Ipod Touch, and dropping a pin - I cannot move the pin to the exact location. When I tap on it and try to move it, the whole map moves with the pin. Am I doing something wrong? What is the correct procedure?

Well it's true, you just need to take that 1/2 a second to select the pin first.
mrtotes

Capturing data changes in alv using classes

Hello All,
Currently am working on alv report using classes..,In this report am displaying 3 grids in the output in 3 different containers(cl_gui_custom_container)...,Am able to handle the data changes done in the grid at the run time using event data_changed ...,
Now the requirement + problem is ...if i do the changes in all the grids ,,,,,and if i click(hotspot event) on any of the rows/records in any of the grids ...,, I need to be able to capture all the data changes done in all the other grids....,,
for example:-
if i modify some records in all the 3 grids ,,, and if I click any of the row in any of the grid at a time,,, all the changes done in all the grids should be captured.....( in simple words one click all changes )
I tried using data_changed event....., am only able to capture the changes of the grid on which i clicked ( ie.hotspot event) but not the changes which i have done on other grids.....Pls. help me out with the possibilities
Hope am clear..
Thanks
John

Hi friend,
METHOD handle_user_command.
CASE e_ucomm.
WHEN 'UPDATE'.
             CALL METHOD r_grid->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows.
LOOP AT it_rows INTO wa_rows.
*****modify the first container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows1.
LOOP AT it_rows1 INTO wa_rows1.
*****modify the second container data***********
endloop.
CALL METHOD r_grid1->get_selected_rows
          IMPORTING
             ET_INDEX_ROWS =
             et_row_no     = it_rows2.
LOOP AT it_rows2 INTO wa_rows2.
*****modify the third container data***********
endloop.
endcase.
Now we can create three container and three different grid class object but we are using same method.
UPDATE buttton is common to all three containers.
But one important point when u change the records in container we must select the rows then only selected rows r come to the internal table otherwise it is not come.
CREATE OBJECT r_container
    EXPORTING
      container_name              = 'CONTAINER_1'
CREATE OBJECT r_container2
    EXPORTING
      container_name              = 'CONTAINER_2'
CREATE OBJECT r_container3
    EXPORTING
      container_name              = 'CONTAINER_3'
CREATE OBJECT r_grid
    EXPORTING
      i_parent          = r_container
CREATE OBJECT r_grid1
    EXPORTING
      i_parent          = r_container2
CREATE OBJECT r_grid2
    EXPORTING
      i_parent          = r_container3
NOW WE CAN CALL THE METHOD.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid2.
CREATE OBJECT event_receiver1.
SET HANDLER event_receiver1->handle_before_user_command FOR r_grid3
I thing it should be possible.But u must remeber u must select the records when u modifie in three containersBUT UPDATE button is common to all three containers.
Regards,
MURALII

SE16 data display and authorizations.

Hi Experts,
I had few following questions regarding data display and authorization using SE16 :-
As example, SAP HCM solution for an enterprise is implemented in say 10 countries :-
- Is it that using SE16 the user has the authorization to display all data, including the data for different countries employee's?
- isn't the infotype data based on the country grouping settiings and shouldn't be displayed via SE16?
- Can the authorization be controlled, using User group or some roles being assigned while creating the user id?
Thank you for your help in advance.
Thanks and Regards,
Puneet Luthra

Puneet,
If you assign SE16 tcode to a profile you can set further authorization object S_TABU_DIS - here you can set authorization groups such as PA for HR intptype tables and SC for PD infotype tables,
I do not believe that you can actually set infotype level access. i.e if you give pa tables then thay can see all pa tables you cannot restrict to just say, 0001 and 0007. This is independent of the P_ORGIN authorizations, so even if you restrict a certain infotype in P_ORGIN, they will be able to see using SE16.
One of the ways in which we have got around it in the past is to just create custom transctaions for each table they want to see, such as zse16_pa0001 and assign individual tables to those who need it. Only HR experts and Support users need this kind of access in the production system so it should be relatively easy to maintain individually.
Hope this helps.

LR 3.2 new smart collection not getting correct capture date?

Just created a new smart collection after updating to LR 3.2.
It's showing photos taken in 2008 and 2009, well beyond the last two months. Checked the capture date displayed in LR. The older photos shown have been edited within the last two months.
Bug or am I doing something wrong?
Thanks.

There was bug with "months" since Lightroom 2. Looks like it has never been fixed.
Try setting "60 days" instead of "2 months".

Mapping feature for queries that cannot be expressed using JDO QL

In the "Java Data Objects vs. Entity Beans" thread at theserverside.com,
there was a question concerning the ways to use a query that cannot be
expressed using JDO QL (for example SQL requests having no equivalent) .
Among the possibilities mentionned in his answers, Craig Russel said
that a JDO implementation could map an SQL query to a Java class
directly :
"This might be done by a JDO vendor who mapped a user-specified SQL
query to a JDO PC class. For example, if you have a DEPARTMENT table
that you want to write an aggregate query for "SELECT D.DEPTID,
MAX(E.SALARY) FROM DEPARTMENT D, EMPLOYEE E WHERE D.DEPTID = E.DEPTID".
You would map this query to a JDO PC class DepartmentMaxSalary which has
a key field deptid and a non-key field maxSalary. The key class
DepartmentMaxSalaryKey has a key field deptid.
Now, construct an instance of the key class:
DepartmentMaxSalaryKey dk = new DepartmentMaxSalaryKey(100);
DepartmentMaxSalary d = pm.getObjectById(dk);
System.out.println ("Department " + d.getDeptid()
+ " has max salary of " + d.getMaxSalary());
When the getObjectById is executed a hollow instance of
DepartmentMaxSalary is constructed by the PersistenceManager. When the
d.getMaxSalary() is executed, the implementation of the method accesses
the maxSalary field which causes the PersistenceManager to executes the
query and return the result into the field.
No implementation to my knowledge currently offers this kind of mapping,
but certainly some will in future."
Do you consider in providing this kind of mapping feature in Kodo ?
Thanks in advance.

patrice thiebaud <[email protected]> writes:
In the "Java Data Objects vs. Entity Beans" thread at theserverside.com,
there was a question concerning the ways to use a query that cannot be
expressed using JDO QL (for example SQL requests having no equivalent) .
Among the possibilities mentionned in his answers, Craig Russel said
that a JDO implementation could map an SQL query to a Java class
directly :
"This might be done by a JDO vendor who mapped a user-specified SQL
query to a JDO PC class. For example, if you have a DEPARTMENT table
that you want to write an aggregate query for "SELECT D.DEPTID,
MAX(E.SALARY) FROM DEPARTMENT D, EMPLOYEE E WHERE D.DEPTID = E.DEPTID".
You would map this query to a JDO PC class DepartmentMaxSalary which has
a key field deptid and a non-key field maxSalary. The key class
DepartmentMaxSalaryKey has a key field deptid.
Now, construct an instance of the key class:
DepartmentMaxSalaryKey dk = new DepartmentMaxSalaryKey(100);
DepartmentMaxSalary d = pm.getObjectById(dk);
System.out.println ("Department " + d.getDeptid()
+ " has max salary of " + d.getMaxSalary());
When the getObjectById is executed a hollow instance of
DepartmentMaxSalary is constructed by the PersistenceManager. When the
d.getMaxSalary() is executed, the implementation of the method accesses
the maxSalary field which causes the PersistenceManager to executes the
query and return the result into the field.
No implementation to my knowledge currently offers this kind of mapping,
but certainly some will in future."
Do you consider in providing this kind of mapping feature in Kodo ?Patrice,
Sorry for the delay responding to this question. The thread dropped out
of my awareness until Rakesh's followup question today.
We do not currently plan on providing a mechanism for configuring JDO
objects to load themselves from arbitrary SQL queries at this point. The
example above seems a little contrived, for a few reasons:
- Presumably, this aggregate salary object would be read-only.
Read-only JDO fields/objects are a whole separate topic that we
have chosen not to address just yet.
- Where would the complex SQL statement go? Putting it in the
metadata seems less than ideal, as this would make for a hideous
metadata file, and even more complexity and more debugging
problems than using direct JDBC SQL calls. Putting the SQL
statement into the class also seems awkward.
- Kodo provides a mechanism for obtaining a connection to the data
store. When aggregate info are needed or complex,
non-object-oriented queries must be executed, standard JDBC calls
to the data store are probably the most appropriate approach, as
they give you complete access to your data store.
If we see a significant interest in these capabilities, then we may
consider them for a future release.
Thanks in advance.Again, I apologize for the time delay in my response. I hope that this
answers your questions.
-Patrick
Patrick Linskey [email protected]
SolarMetric Inc. http://www.solarmetric.com

Capturing data acquisition frames reliably at 100 hz using serial, how?

Hi All,
I am completing development of a 14 channel, 10 bit resolution, pic based data acquisition circuit. It transmits frames of 41 bytes (currently) at 100hz using serial. The embedded code functions satisfactorily. I can see data ok using hyperterminal. I am unsure how to optimise labview to get complete frames without hogging lots of cpu/system resource etc. eg. do I simply set the frame size (num of bytes) to retrieve and set this looping as fast as possible , and/or set the rate to fetch frames at the rate frames are transmitted by the pic? This may allow drift in available buffered bytes to finally overflow the buffer.
I tend to lose 1 byte in 100 typically doing nothing but this increase
s to chunks of bytes if I interact with windows.
I have the feeling a number of decisions need making when setting up a serial link like this but I am unsure which settings best suit my application.
Thanks in advance,
Regards
Chris

Hi Lynn, Tristan,
Please find the current llb attached. This has my last serial run and shows how the data gets glitchy after a number of seconds (toward end of the text box).
I have spent time building the suggestions into code. I am not yet trying to strip out individual channels. At the moment I just want to get frames in reliably before moving on.
It certainly looks a lot more reliable now but a few more questions have been raised. I think the idea of getting data in using 1 loop then immediately passing it for processing by another parrallel loop seems important for reliability.
You will notice I grab a frame and it then goes into a que where it will be processed but this needs doing quickly as frames will be used in realti
me.
I have set up the code to trim the delay for both the get data from serial port loop and get 1 entry from the que loop.
I am using 2 identical circuits in my product, 1 captures data from a leg harness, the other controls movements of a biped robot (servos) this occurs in "real time". I need to remove as much latency due to processing as possible.
click on "video 3" on the right of the page for a prototype demo:
http://www.robotic-systems.co.uk/products/full_system.htm
I noticed that some of text embedded within text boxes used in subvi's can tend to float thro to the top level vi. I proved this by adding a bit of text and noticed it kept cropping up occasionally on the top level text box. I found this peculiar but cured it by deleting all chars in the subvi text box. Now I am concerned, could this be somthing to do with why I get glitches in text occasionally?
Is there some labview feature to say flush all text, numbers and bools prior to running from the top leve
l?
I'd be gratefull if you have a look thro my llb and sanity check the flow of code and let me know what you think.
Best Regards
Chris
Attachments:
Monitor.llb ‏722 KB

Task Sequence failed to restore captured data from USB drive onto a new machine using UDI task requence

Hi,
Environment ConfigMgr 2012 R2
Replace Scenario: Capture data to a USB external drive and Restore it from USB external drive.
Steps taken:
1) Created Computer Association with New computer and Source computer
2) Deployed UDI replace Task Sequence to Source computer and captured data to a USB external drive
3) Run UDI Task Sequence from Boot Media to Restore data from USB External drive which had the captured data.
Issue:
My task sequence failed to restore data from USB external drive.
Is there a fix
Any help is greatly appreciated it.

I created a query to see the deployment logs in real time. I see the TS fails when running "Request State Store" task. Here are the logs.
Severity Type Site code Date / Time System Component Message ID Description
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11141 The task sequence execution engine failed execution of a task sequence. The operating system reported error 1: Incorrect function.
Error Milestone POK 7/22/2014 4:13:15 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Error in the task sequence) in the group (Gather Logs and StateStore on Failure)
with the error code 1 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript "C:\_SMSTaskSequence\WDPackage\scripts\ztierrormsg.wsf"' SwdAction = '0001' Set command line: Run command line Working dir 'not
set' Executing command line: Run command line Process completed with exit code 1 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment Toolkit version: 6.2.5019.0 The task sequencer
log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ZTI deployment failed, Return Code = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Information Milestone POK 7/22/2014 4:13:14 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Copy Logs) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: ... 扴捡杫潲湵⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就瑺獩瑥慢正牧畯摮氮杯潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯穜楴慴潴⹯潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散�潌獧䍜剏ⵐ䠳䑗塐就潃祰湩⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯作䑓敓畴坰穩牡⹤潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就协卄瑥灵楗慺摲氮杯潃祰湩⁧㩃坜义佄南停湡桴�潬⁧潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌獧䍜剏ⵐ䠳䑗塐就慐瑮敨屲湕瑡整摮䍇潃祰湩⁧潬⁧㩃坜义佄南䍜䵃䱜杯屳䵓呓䱓杯䉜䑄氮杯挠湯整瑮⁳潴尠停䭏偃䍓䵃卐㄰䍜彍潓牵散尤协屄潌�Console
> Successfully resized the shadow copy storage association Return code from command = 0 Cleaning up default wallpaper registry keys Process completed with exit code 0 zticopylogs processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Move State Store) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: [ smsswd.exe ] PackageID = '' BaseVar = '', ContinueOnError='' ProgramName = 'cscript.exe "C:\_SMSTaskSequence\WDPackage\scripts\ztimovestatestore.wsf"' SwdAction = '0001' Command line for extension .exe is "%1" %* Set
command line: Run command lineWorking dir 'not set' Executing command line: Run command line Process completed with exit code 0 Microsoft (R) Windows Script Host Version 5.8 Copyright (C) Microsoft Corporation. All rights reserved. Microsoft Deployment
Toolkit version: 6.2.5019.0 The task sequencer log is located at C:\WINDOWS\CCM\Logs\SMSTSLog\SMSTS.LOG. For task sequence failures, please consult this log. ztimovestatestore processing completed successfully. Command line returned 0.
Information Milestone POK 7/22/2014 4:13:07 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Gather) in the group (Gather Logs and StateStore on Failure) with
exit code 0 Action output: ... (BIOS is 'DELL - 1072009'). Property IsVM is now = False Finished getting virtualization info Connection succeeded to MicrosoftVolumeEncryption There are no encrypted drives Property IsBDE is now = False Processing
the phase. Determining theINI file to use. Using COMMAND LINE ARG: Ini file = CustomSettings.ini Finished determining the INI file to use. Added new custom property MYCUSTOMPROPERTY Using from [Settings]: Rule Priority = DEFAULT ------ Processing the
[DEFAULT] section ------Process completed with exit code 0 ------ Done processing CustomSettings.ini ------ Remapping variables. Property TaskSequenceID is now = Property DeploymentType is now = NEWCOMPUTER Finished remapping variables. ZTIGather processing
completed successfully. Command line returned 0 ReleaseSource() for C:\_SMSTaskSequence\Packages\POK0000F. reference count 1 for the source C:\_SMSTaskSequence\Packages\POK0000F before releasing Released the resolved source C:\_SMSTaskSequence\Packages\POK0000F.
Information Milestone POK 7/22/2014 4:13:03 PM MININT-P6E4T6G Task Sequence Engine 11130 The task sequence execution engine skipped the action (Use Toolkit Package) in the group (Gather Logs and StateStore on Failure) because
the condition was evaluated to be false.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11134 The task sequence execution engine successfully completed the action (Set Error Code) in the group (Gather Logs and StateStore on Failure)
with exit code 0 Action output: Finished with error code 0.
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11124 The task sequence execution engine started the group (Gather Logs and StateStore on Failure).
Information Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11122 The task sequence execution engine skipped the group (Cancelled Wizard Group) because the condition was evaluated to be false.
Error Milestone POK 7/22/2014 4:13:02 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Connect to State Store) in the group (State Restore) with the error code 1
Action output: ... ( 0x80070035 ) , trying to connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 15 seconds. Unable to connect to share: The network path was notfound. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 20 seconds. Unable to connect to share: The network path wasnot found. ( 0x80070035 ) , trying to
connect without username. The network path was not found. Unable to connect to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Sleeping for 25 seconds. Process completed with exit code 1 ERROR - Unable to map a network drive to
\\3807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f. Unable to connect to 563807000000100000000000:\2fa390ff58558b49c45bf204dfa5717f ZTI ERROR - Non-zero return code by ZTIConnect,
rc = 1 Command line returned 1. The operating system reported error 1: Incorrect function.
Warning Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11138 The task sequence execution engine ignored execution failure of the action (Request State Store) in the group (State Restore).
Error Milestone POK 7/22/2014 4:11:46 PM MININT-P6E4T6G Task Sequence Engine 11135 The task sequence execution engine failed executing the action (Request State Store) in the group (State Restore) with the error code 16389
Action output: ... etting Media Certificate. Sending request to MP
http://abcdefg.xyx.xyz.local. Setting message signatures. Setting the authenticator. CLibSMSMessageWinHttpTransport::Send: URL: abcdefg.xyx.xyz.local:80 CCM_POST /ccm_system/requestRequest was successful. migInfoRequestMessage.DoRequest (m_sResponse,true),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,1098) pClientRequestToMP->DoRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2778) ExecuteRestoreRequestToMP(migInfoFromMP),
HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\smpclient.cpp,2903) ExecuteRestoreRequest(), HRESULT=80004005 (e:\nts_sccm_release\sms\client\osdeployment\osdsmpclient\main.cpp,84) OSDSMPClient finished: 0x00004005 reply from server
is 'NoReply' ClientRequestToMP::DoRequest failed (0x80004005). ExecuteRestoreRequestToMP failed (0x80004005). ExecuteRestoreRequest failed (0x80004005).. The operating system reported error 1: Incorrect function.

Not able to display data in different columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.

Hi Venkat,
After extracting data into DSO check the request whether active or not.
Check data in DSO in contents.
If is there any restrictions on info providers in Queries.
Let us know status clearly.......
Reg
Pra

Not able to display data in separate columns using Unicode encoding

Hi,
Iam using Unicode encoding in my Java appln to support Japanese characters while downloading CSV report. But using the Unicode encoding displays all data in the first column of Excel sheet.
Please let me know how to display data in different columns using Unicode encoding in Excel sheet.
This is an urgent need. Please help me out.

Hi,
I have no problem with item :P15_EV_LCL this is having a value my probem here is i am using java script to display the value in different color based on the condtion case
eg:
select
case
TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2)
= :P15_EV_LCL
then
span style="background-color:lightgreen"
|| TRUNC((
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
else
span style="background-color:yellow"
|| TRUNC(
( (NVL(Z."AEWP",0) - NVL(Z."BEWP_Final",0) ) / DECODE(Z."BEWP_Final",0,NULL,Z."BEWP_Final") ) * 100
),2) || '%' || /span
end "Effort"
from actuals Z
If i dont use this <Span style="Background-color:color"> i am able to generate data in excel sheet if i use this color coding i am not able to get data in spread sheet.
Please suggest
Thanks
Sudhir
Edited by: Sudhir_N on Mar 23, 2009 10:00 PM

Feature Request: Better dimensional meta data displayed

Aside from every other problem with how Bridge lets the user display, sort and interact with meta data (aside from the actual metadata palette), it would be way more useful to have the Dimension meta data displayed under an image shown in 'real world' dimensions.
For example: I'm looking at my 'final images' that have been converted to CMYK, and sized for delivery. At this point Pixel Dimensions are pretty useless. What I really want to do is quickly scan my images, seeing Inches (or CM) with a PPI. My clients never ask for pixel dimensions (unless we are talking about the web, which we aren't) - they ask for 8.76" x 5.34" at 266ppi. It would just be nice to use bridge to double check the image sizes before delivery.
thks
andy

Thanks for you feedback. You wish has been granted (dimensions can now be displayed in pixels, inches or centimeters. Go to Preferences > Thumbnails to select which dimension to display below the thumbnail, or Preferences > Metadata to customize the metadata pane). Check out the free beta of Bridge CS3 (http://labs.adobe.com/technologies/photoshopcs3/)
Cheers,
Arno.
Bridge Engineering Manager, Adobe.

Error writing data in a flat file using UTL_FILE feature

Hi All,
I have written a package which fetches data from four different cursors and inserts into a temporary table.
Now this temporary table is used to write data in a file using the UTL_FILE feature.
fhandler :=
UTL_FILE.fopen (l_path,'Demand_Transactions_'
|| TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
|| '.txt',
'w',
max_linesize => 32767
This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.
Any help in this would be highly appreciated.
Regards,
Shruti

891330 wrote:
Hi All,
I have written a package which fetches data from four different cursors and inserts into a temporary table.
Now this temporary table is used to write data in a file using the UTL_FILE feature.
fhandler :=
UTL_FILE.fopen (l_path,'Demand_Transactions_'
|| TO_CHAR (SYSDATE, 'YYYYMMDDHH24MI')
|| '.txt',
'w',
max_linesize => 32767
This table has 62593 records and when it starts writing data into the file from the table it errors out after writing 30045 records with the error - ORA-01722: invalid number.
Can anyome please advise me is it because of the max_linesize => 32767. If not then what can be the possible reason.Max linesize is the number of characters in a line before a newline has to be issued, not the number of rows written.
The error would indicate that you have a character to number conversion going on somewhere but the characters are not numeric so it's failing that conversion.
This doesn't sound like a UTL_FILE issue, but more to do with how you are building up your strings to output to the file.
You would need to show us your code that builds up the lines you are writing out, with details of the datatypes of any of the columns/variables included in that.

Display data in log file using PL/SQL procedure

Just as srw.message is used in Oracle RDF Reports to display data in log file in Oracle Apps, similarly how it is possible to display data in log file using PL/SQL procedure?
Please also mention the syntax too.

Pl post details of OS, database and EBS versions.
You will need to invoke the seeded FND_LOG procedure - see previous discussions on this topic
Enable debug for pl/sql
https://forums.oracle.com/forums/search.jspa?threadID=&q=FND_LOG&objID=c3&dateRange=all&userID=&numResults=15&rankBy=10001
HTH
Srini

How to export a photo in lightroom using capture date

I have photos in lightroom 5 i want to know how to have the capture date show in the photo when i export it. I want to see the capture date in safari on mac. I also want the capture date to match when i use metadata edit capture time some times the photo had a date in lightroom and a different date in metadata edit capture time.

There is a command line interface with the Administration Edition
that allows you do select which items are exported, based on the
command switches you provide.
See the Discoverer Administration Guide, there's an appendix that
deals with all the command line options.

Capture Dates Displayed Icorrectly. Impacts using MAP feature of LR4

Similar Messages

Maybe you are looking for