Capture Direct to External HD/Dropped frames with Firewire-In and eSATA-Out

I have been working on a setup with a brand new 2.6 GHz MBP/4 GB/200 GB-7200rpm HD. I am capturing DVCAM via Firewire400. I am capturing direct to a LaCie Biggest Quadra connected to an eSATA PCI card. I keep encountering dropped frames on capture. Could this be due to the PCI connection? To the best of my knowledge, the PCI slot is a separate bus from the Firewire bus, which should avoid the pitfalls of i/o on the same Firewire bus. What could be the problem here? Thanks in advance.

If you have a MacBook Pro, then yes the ExpressCard bus is separate form the firewire bus. The pros here ALWAYS recommend capturing via firewire to a different bus, either firewire or eSATA via an ExpressCard (or PCI for the previous generation laptops) since the card is on a different bus. Have you tried attempting a capture to the inter drive? I know this is in no way ideal, but this way, we can rule out the camera/deck. DVCAM also isn't much bigger than DV if at all, so bandwidth shouldn't be a problem. Again, not ideal, but try connecting the big disk to the other firewire port on your MBP. This way we can rule out the eSATA card. Report back and we'll see what else we can do to help.
Don't forget to rate if this was helpful,
-Brian

Similar Messages

Dropped frames with HD

Is it possible to edit HD with final cut HD and not have any dropped frames?
It is impossible to get a smooth slow-motion clip let alone one in real time.
If there is a fix or some technich to prevent this?
thanks-
Jake
Mac Book Mac OS X (10.4.7) 2 GHz intel Core Duo. 2 GB RAM

Well, there are lots of things that can cause dropped frames, but I think it's pushing the envelope to be doing HD on a MacBook. Don't take this the wrong way - I think MacBooks are great machines. But HD requires a lot of computing power and even though the MacBook is qualified for FCE-HD, given the MacBook's Intel GMA video processor/shared memory and 5400rpm HD, I wouldn't be surprised to get dropped frames with HD material.
On the other hand,
-how full is your system HD
-are you using an external hard drive by any chance
-have you rendered your material or are you relying on RT effects
-have you mixed down your audio
-do you have any other apps running at the same time as FCE

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

SUGGESTION ON BEST External HD to work with Mac Air and Logic - for sample streaming.

huge storage, low cost, high quality, very small and portable.
BEST FOR THE COST, Toshiba "tiny giant" 15mm thick 2TB drive (have several of them, lots of storage in tiny package)    $100
http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48    /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
best options for the price, and high quality HD:
Quality 1TB drives are $50 per TB on 3.5" or $65 per TB on 2.5"
Perfect 1TB for $68
http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
Nice 500gig for $50. ultraslim perfect for use with a notebook
http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s    r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
*This one is the BEST portable external HD available that money can buy:
HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr    _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
Most storage experts agree on the Hitachi 2.5"
Hitachi is the winner in hard drive reliability survey:
Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

HT201272 Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error... I have tried all possible solutions i found on internet...my restrinction

Hi there! today i wanted to buy some gems so i charged my acc with 10 dolars and try out to buy gems. problem is i m getting "your purchase could not be completed" error...
I have tried all possible solutions i found on internet...my restrinctions are disabled...tried reinstaling, relogging, restarting phone.. nothing seems to help...
normally i would contact custommer support but i m using US account and i m not from US. anyway my US account is charged with money and it workes perfectly for all my other friends using this method ( we got some free US vouchers so we needed US accounts)
Any advice?
thanks in advance

iTunes Store Support
http://www.apple.com/emea/support/itunes/contact.html

My iphone synched with a computer and wiped out my contact. can they be recovered?

my iphone synched with a computer and wiped out my contacts. can they be recovered?

Yes, if you still have a backup from the time before this happened, see this article for more info: iPhone and iPod touch: About backups

FCP Capture Dropped frames with advanced pulldown

Ok so here's my problem, I have Final Cut studio with FCP 4.5 and I'm trying to import 24p advanced pulldown media from my tapes, and getting a dropped frames warning that ends import; but after trying both cameras (the one the footage was shot with and a second one) and different tapes with normal footage and 24P advanced I still get the same error message. Then I went and replaced the firewire cable with no luck, and I just went and got a PCI firewire card qualified for video import same dropped frames.
Now before I put in the PCI card I clean installed FCP studio with no luck, I also went through and triple checked every setting in FCP for any problems; and I'm wondering if it might mean that either, I need to replace the media drive I'm importing to or if I need more then my 1GB of RAM?

I too am having the exact same problem with 4.5 (although no advanced pull down) and 24p. Last week I was importing fine, this week, dropped frames right and left using batch capture after logging my clips.
I'm using a dual 2.0ghz G5 with 3.5gb of RAM, 10.4.9, booting off a 250gb internal (48gb free) disk but using a G-Tech 500gb firewire 800 external firewire drive for scratch(400gb free). Media is miniDV, tape deck is Sony GVD1000 and I've tried my DVX100b for playback as a test. I've gone thru the FCP checklist and used Disk Utility and Disk Warrior (no problems there). I've tried different tapes (including ones that were successfully captured last week).
I'm suspecting that some recent download of QTime, OSX, or iTunes is at fault. Anyone else suspect the same?

Problem with source tape and drop frames with capturing HDV

I am having trouble capturing a tape. Every time I try and capture I get the message problem with tape, I try to change settings but after a few seconds of capturing the capture stops. I know that the tape is fine so it does not have anything to do with my tape. Capture also stops because it comes up with a message saying drooped frames.

Are you capturing to an external or secod drive, right? What kind of drive? What camera?
Alberto

MAC PRO KONA 3 External SATA dropped frames

Recently our company upgraded to KONA3 card with the new MAC PRO. We were not aware our External SATA drives would not be 100% compaditable with the MAC PRO. The drives do mount and seem to work fine in Standard Def and compressed HD, but start to drop frames when dealing with Uncompress capturing. Spoke with AJA and was referred to use Fibre or SCSI based on the LH FAQ portion of their site.
We've installed a temp Fibre Channel Drives and set the card on port 4, with the KONA3 card on Port 3. Do note the drives are RAID 0.
Still having dropped frames when capturing Uncompress HD to the drives.
My questions are:
1) Why does the MAC PRO not support External SATA?
2) Any ideas to contribute to my Fibre issues?
3) What type of other storage solution has been proven to work?
Any help would be much appreciated.
Thank You All For Your Professional Experience
Marcus
MAC PRO 2.66 Dual Core Intel
2GB of RAM
3.2 TB of EXTERNAL SATA (from Promax)
500GB FIBRE CHANNLE
OS 10.4.8
KONA 3 Drivers vs3.3
FCP 5.1.2
MAC PRO Mac OS X (10.4.8) KONA3; External SATA

My questions are:
1) Why does the MAC PRO not support External SATA?
The only Mac Pro compatible External SATA drive is from CalDigit. This has been proved by people in Barefeats and Creativecow. More and more people are using CalDigit S2VR HD and their FASTA-4e card to do the editing.
3) What type of other storage solution has been proven to work?
S2VR HD has been provedn to work and work very well with great price. Many people are raving about CalDigit's products and its support.
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=98&postid=862284
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=98&postid=862289
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=98&postid=862301
http://forums.creativecow.net/cgi-bin/newreadpost.cgi?forumid=8&postid=917131
Power G5 Quad and Intel Mac Pro Mac OS X (10.4.3)

External Drive = Dropped Frames in Playback

Hi there Al--
Here's the gear I have...and the problem I'm NOW having.
Gear:
PowerBook G4 with OS X 10.3.9 and 45GB disk space
768 RAM
LaCie D2 160GB Harddrive
Panasonic MiniDV cam and Sony PD 150
Final Cut Express HD
Problem: I can capture to my internal HD fine, and playback sequences on projects located on my internal HD fine. BUT I cannot capture to my external Lacie drive using either the Panasonic MiniDV cam or Sony PD 150 cam. That's not such a big deal, as I can capture to the internal hard drive and transfer the captured footage to the lacie external drive--however Final Cut won't let me do anything from the external HD. Whenever I try to view footage on a project from the external drive I get a "dropped frame" message from Final Cut (I can't even just play an individual quicktime file from the external drive). I'm a bit baffled...as the lacie drive i'm told is the "pro" drive for editing with final cut.
Thoughts?

That's great news !
Regarding the format - I'll admit that I stand by Will Rodgers' advice (If it ain't broke, don't fix it) ... if things are working fine now you probably don't have to worry about the format ... but you might want to check it just to know what it is (I suspect it's Mac OS Extended, anyway)
cheers !

External Drive Dropping Frames

Hey,
I am in a Post Production class at GSU and I am having some tech problems here. I am running Final Cut Pro 5 on a Mac G5. We are required to have External HDD, but everytime I play a sequence I keep dropping frames. My HDD is a 160 GB, 7200 RPM, Western Digital in an Adaptec enclosure connecting via FireWire. Any ideas?

Search here for dropped frames.
There are dozens of possible explanations. the most likely is user error and that can be caused by dozens of simple things. You start with the simple things and try to eliminate one at a time. Cable, card, system prefs, FCP setup, FCP prefs, FW pathway. It's all in the manual, what you can and should not do.
Your post production class instructor should be able to help you much more rapidly than we possibly can.
bogiesan

Dropped frames with a rendered timeline

Hello, I've captured footage from a canon HX A1 with the easy setup in FCP 5 set to HDV. I'm using a Macbook Pro Intel Core Duo 2.16 Ghz processor with 2 gigs of RAM.
When I put a clip into the timeline, an orange bar is present, so I render the sequence. But even when the orange is replaced by blue, I can't play the footage for more than a second or two. Even a lower RT setting doesn't help, unless I cut the frame rate to half.
Message was edited by: micahwolf

YOu are missing the point. Your sequence settings do not match the settings of your footage. You should NOT be seeing any render lines. What you need to do is choose the proper Easy Setup that matches your footage, then make a new sequence and drop the footage into the new sequence.
If you can't seem to get a setting that matches, use this tip:
Multiclip trick
Shane

Avoiding dropped frames with Matrox and HD Video

What is the best hard drive configuration to avoid dropped frames when using a Matrox MXo2 mini for HDMI outpjt to a high res monitor/tv? I am experiencing slow performance with the four drives in my Macpro 3,1 3Ghz 30GB Ram Nividia Cuda card. I am after about 200-250 MBytes/sec transfer speeds. Can I do this with two identical disks in my Macpro and configuring them for Raid 0. Or do I need to do it externally? I have increased speed to about 120 MBytes/sec by using a Esata card and connecting into to a Lacie 2TB Big disk,configured for Raid 0 . I need to go a bit faster than this....especially if I want to use premier

Those are nice looking enclosures and in general I like OWC. I've been using their stuff since before the turn of the century.
But in this case, I don't think you'll get the speed you're looking for because they are using eSATA and muxing the data over a single cable. It's a flexible solution, but not a very fast one. To re-iterate, the two flaws I see are:
1. SATA II disk speed, and
2. a single eSATA cable
This could theoretically provide 300MB/sec, (they have a benchmark that is around 250) but don't look for it day-in, day-out. As the drives fill up and reality settle in I doubt you'll see the numbers you want. BUT... maybe it'll provide enough.
Instead, take a look here:
SATA Enclosures - PC PitStop
Not quite as sassy looking, but I've had the first enclosure shown running with four spindles and a SFF-8470 multilane cable since 2006. And it still benches over 250MB/sec mostly loaded on the original drives.
Any of the enclosures on that page will support SATA III drives and they offer a variety of controllers.This isn't a big shop but they know what's up. Call them. I know I can build a RAID with their stuff that will cost about the same as the OWC box and be seriously faster.
Hope this helps

Flash player drops frames with playing live h264 frames

Hi
i have been tryin to get to a adobe representative for a long time now regarding this but unfortunately no one responds fast enough. I am facing a terrible issue. When broadcasting h264 live video from a flash based encoder client i notice severe frame drops on the playback end no matter what player i use. It even happens if i use fms development server on my own system. Video becomes smooth if i add a 1 sec buffer to the player. but then the video is no longer live.
So my question is , is theer somethign wrong with h264 encoding in flash player or thats the way it is suppose to be ? at zero buffer frame drops are severe. Sample config :
320 x 240 @ 24 fps @ 90000 bps @ 100 KFI @ 3.1 level @ baseline profile.
I sincerely some one at adobe to respond. There are many stranded questions on this topic on the forum and on the web already.

The CPU usage is 2-6% on the i7 920 vista 64bit computer. The audio doesn't seem to be dropping. Some more clues that might help you help me
- The quality of the video doesn't matter, 360p drops frames just as often as 720p or 1080p.
- The dropped frames still occur even when the video is completely downloaded and replayed without any buffering needed.
One thing that does fix the dropped frames is completely disabling my sound card in the windows playback sound options. This also fixes the second computer's dropped frames which only has onboard realtek audio. I have tried using a Creative PCI sound card and the built in realtek sound but they both behave the same. The latest drivers were installed for both.

FC Pro 4.5 & FC Express 3.0 may drop frames with Mac OS X 10.4.9

Just a heads up:
Issue
If Mac OS X 10.4.9 is installed, Final Cut Pro 4.5 and Final Cut Express 3.0 may drop frames when attempting to capture video to some FireWire-based storage devices. Final Cut Pro 5 and Final Cut Express 3.5 are not affected by this issue.
Affected Products:
• Mac OS X 10.4.9
• Final Cut Pro 4.5
• Final Cut Express 3.0
Solution
Capture media to an internal ATA drive.
If FireWire storage is a requirement for your workflow, update to Final Cut Pro 5 or Final Cut Express 3.5. If necessary, you can archive and install Mac OS X to revert your operating system to Mac OS 10.4.8.
http://docs.info.apple.com/article.html?artnum=305284
G5 1.8 DP (PCI-X) Mac OS X (10.4.9) ATI X800 XT, 4GB RAM, 20" & 23" ACDs, M-Audio Revolution 5.1, Fostex D15 DAT

Is this in case they missed the other eleventy billion posts about this already on the forum .... ?
x

FCP 4.5 & FCE 3.0 may drop frames with Mac OS X 10.4.9

Hi:
I thought it could be a good idea to post this information for thos users of FCP 4.5 that still haven't upgraded their systems.
This information comes from this Apple doc:
http://docs.info.apple.com/article.html?artnum=305284
====================================
Issue
If Mac OS X 10.4.9 is installed, Final Cut Pro 4.5 and Final Cut Express 3.0 may drop frames when attempting to capture video to some FireWire-based storage devices. Final Cut Pro 5 and Final Cut Express 3.5 are not affected by this issue.
Affected Products:
Mac OS X 10.4.9
Final Cut Pro 4.5
Final Cut Express 3.0
Solution
Capture media to an internal ATA drive.
If FireWire storage is a requirement for your workflow, update to Final Cut Pro 5 or Final Cut Express 3.5. If necessary, you can archive and install Mac OS X to revert your operating system to Mac OS 10.4.8.
This document will be updated as more information becomes available.
====================================
Hope it help someone to avoid some headaches !
Good luck
Alberto

http://discussions.apple.com/thread.jspa?threadID=929465&tstart=0
Alberto

Capture Direct to External HD/Dropped frames with Firewire-In and eSATA-Out

Similar Messages

Maybe you are looking for