Capture (download) a sound played through Safari
I am on a site that is playing a sound I would like to capture into a file. Is this possible?
thanks
WireTap
Google it.
Similar Messages
-
Sound playing through both headphones & speakers
Sound playing through both headphones & speakers at the same time
please help.
HP ENVY TouchSmart m7-j020dx Notebook PC (ENERGY STAR)Hi,
Try the following.
Download the IDT Audio installer on the link below and save it to your Downloads folder.
http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63555.exe
When done, open windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Right click the IDT device and select Uninstall - you should also get a prompt to remove the current driver, tick the box to allow this and then proceed with the uninstall.
When complete, download and reinstall the Chipset driver on the following link.
http://ftp.hp.com/pub/softpaq/sp63001-63500/sp63408.exe
When the Chipset driver reinstallation has completed, shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f9 to load the defaults ( this is sometimes f5, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.
Let Windows fully load - it will automatically load an audio driver, but just let this complete. Then open your Downloads folder, right click on the IDT installer and select 'Run as Administrator' to start the installation. When this has completed, restart the notebook again before checking.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience -
How to make the notification sounds play through EarPods
The notification sounds/ringer on my iPod touch keeps playing through the external speakers even though I have EarPods plugged in. If I turn on a video of game tho, it will play through the earpods. Is it possible to make the notification sounds play through the EarPods as well?
Hi Everyone,
Just in case anyone else runs into this problem here is the solution that i've managed to piece together,
I have a movie clip twice the size of the stage, the movie clip is called bg_mc, here is my actionscript...
bg_mc.addEventListener(Event.ENTER_FRAME, mouseMoveHandler);
function mouseMoveHandler(event):void
var cursorX = stage.stageWidth - mouseX;
bg_mc.x -= dx / 5;
this action script tells the movieclip to move left and right depending on where the users mouse pointer moves. (it also adds a slight delay to make it look like tweening)
I then published this in Flash using the publish settings shown in the reply above.
Then i went into dreamweaver and removed the margins in the html file
Now the flash file will resize to any screen resolution and will allow the user to move the MC left / right across the screen depending on where the mouse pointer is,
I hope this is helpful,
Ben -
When I click on a movie in Firefox, the sound plays through my Ipevo telephone instead of my external speakers
You can open the volume control via the icon on the Taskbar and check which Device is used.
* https://support.mozilla.com/kb/No+sound+in+Firefox -
I'm downloading a large file through Safari, but it keeps returning to the homescreen and the download stops. How do I stop this?
If it's not a jpeg or PDF, you can't download it on the iPad.
-
3GS - YouTube only plays through Safari, can't connect through e-mail links nor app icon. Fixable?
iPhone 3GS: YouTube only connects/plays through Safari but not through links in e-mail messages nor from the app icon. Fixable? Thanks.
Thanks for joining the discussion.
Although port 8443 is mosten quoted as correct port for CalDAV and CardDAV, port 8843 can be found both on Apple's website and other places:
see Technical Note 1649 to find port 8443 listed for iCal and port 8843 for Address Book
Mac OS X Lion Server for Dummies (sic) lists port 8843 on pages 236 and 238 but port 8443 in many other places
when you want to push iCal and Address Book information with Profile Manager, Profile Manager lists port 8443 for iCal but port 8843 for Address Book as default:
So I hope you understand I'm somewhat puzzled.
I did get the Address Book working for my Lion desktops with the all the necessary certificates as far as I know, just not for the iOS devices (iPhone and IpPad). iCal sharing from Lion Server works fine on both Lion and iOS devices. -
Skype sounds making my other sounds play through s...
Whenever a skype sound plays, the sound comes through my headphones. However, let's say I'm listening to music at the same time. The skype sound will cause my music to play through the speakers for the duration of the skype sound. Is there a way to make both the sounds play through my headphones?
This isn't how it was on my old headphones. My new headphones are Logitech G230's.
Also, in this image: http://prntscr.com/4adcvz you can see that a sound is playing through the "speakers" while it's actually playing through my headphones. My old headphones had a USB and my new one doesn't, so that might be why.I had the same problem, go to sound/playback devices accesible from either control pannel or right-clicking the speaker icon in the bottom-right-hand corner.
Then play around with disabling/enabling different devices until it works.
Put on some youtube video or something else that runs for a while, then every time you made a change call Echo/sound testing services -
Sound playing through speakers and Headphones at the same time...
Hi everyone, I have a Toshiba Satellite A215 S5849. It is only about 6 months old. Now whenever I plug my headphones into the headphone jack, sound keeps playing through the speakers and in the headphones at the same time. Also the speakers do always have a crackling sound like they are blown. I have been trying to fix it for awhile now but no luck. Any help would be appreciated.
Hello again, sorry that the driver did NOT resolve the issue. What I suggest we try is the Support Assistant. This will do a scan on your entire computer and if the computer does have a issue it will find it and show you how to resolve the issue. Please click on the following link to get to the download. http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110990-1&cc=us&dlc=en&lc=en...
Thanks again.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Hey all,
About a month ago I upgraded to mavericks on my 2009 imac. I am using a presonus firestudio interface. Every since quicktime will not play without massive static, It gets better when I change to 48,000 but still there. also safari will not play music or videos that use quicktime. How can i solve this or go back to mountain lion which worked flawlessly.Hey all,
About a month ago I upgraded to mavericks on my 2009 imac. I am using a presonus firestudio interface. Every since quicktime will not play without massive static, It gets better when I change to 48,000 but still there. also safari will not play music or videos that use quicktime. How can i solve this or go back to mountain lion which worked flawlessly. -
Satellite P200 - no sound playing through Panasonic HDTV
Hi, I recently bought a P200 Notebook, and have tried to play HD DVDs through my Panasonic HDTV, connecting from the notebook's HDMI port to the TV's HDMI port with an HDMI lead, and connecting from the headphone socket on the notebook to the two audio sockets on the back of the TV. However, although the image is fine, no sound is coming through the TV.
I think I may be overlooking something incredibly obvious, but has anyone got any suggestions as to why no sound is coming from my TV?
Thanks!I've done it
Open up Control Panel
Select *<<Sound>>* (Not the Realtek HD Audio Manager)
Under Devices there will be Digital Output Device (HDMI)
Right Click and select *<<Set as Default Device>>*
Hey presto Audio comes blaring out of the TV.
After Disconnecting, it seemed to stay locked to HDMI Audio despite selecting Speakers as the Default output. I had to disabled HDMI and then reenable it after the speakers were being used as the defaulot device again.
This may not be the best solution but it works, so I can finally start watching all my BBC IPlayer downloads.
If anybody has a neater solution that means Audio is automatically switched on connecting and HDMI Monitor please tell me. -
I have a Macbook Pro early 2011 running on mountain lion version 10.8.2. A while back, i purchased a mini display port thru HDMI port so i could watch dvds on my toshiba television. it all worked great for a while, then the sound just stopped working. At first, I thought the mini display port connector must have broke, until I plugged it into a sony television and it worked. I also tried using it through a samsung television and it worked just fine. Why does it not work through the toshiba television anymore? The picture works fine, but the sound does not come thru the television anymore. My mac is set to play sound thru the HDMI port and it doesnt. When i switch it to built in internal speakers, the sound comes thru my mac, but when i switch it, no sound comes out. Any help would be greatly appriciated. Thank you!
I am still waiting to receive a response from them, but i dont think they'll be much help. the television still works fine and all of the ports on the back, including both HDMI ports, work perfectly.
-
IPad Air auto downloads music that plays through wifi
Hey Gang,
So, first off, I do NOT have auto-downloads on for music, ONLY for updates. I had a couple of playlists downloaded of music, but the iPad kept telling me I was running out of space when I didn't add anything, but it seemed to notify me when I was listening via iCloud. I tried managing my space through iTunes, but when I'd deselect ANY music my iPad was saying I had 3.4 GBs of music. When I checked Settings/General/About it kept saying I had 407 songs taking up space. In iTunes it would show a bunch of songs as if they were just connected through the cloud (which was disabled, as was homeshare), and as you know that should' take up any memory.
I even went through and deleted All Music from the About section and when I restarted, at first it said No Data, but then all of a sudden 407 songs would be there (unfortunately some regrettable purchases too!). I tried again and I kept watching the tracks go up when I listened to a song through iCloud (other attempts the 407 songs just appeared at once). So I turn my WiFi off; only three songs on the iPad, the ones I just played. So for whatever reason the iPad was downloading a bunch of songs as I played them (that came back as soon as I turned wifi back on).
I have a feeling when I turn iMatch back on that every song I listen to (via the cloud, supposedly) will start to take up storage space on my iPad, which is total crap. All my software is up to date, my 27" 3.4GHz i7 iMac is only two years old. I have a feeling it's something to do with Apple not liking all the cds I copied to iTunes and then saved to iCloud (they tend to only want you to buy music through iTunes).
Anyway, I seem to be the only person with this problem on the interwebs. Let me know if you have any suggestions (reformatted a bunch too).
P.S. I have the same problem on my iPhone 4S, but figured it was just 'cause it's older. iPad air is totally new! Probably a IOS7 issue...The more I think about this, isn't a black screen with the white apple logo the INSTALLATION screen? Not the downloading screen (which is white with a BLACK apple logo...)
Can anyone clear that up? Thank you!
Ok: the MORE I think about this, that was the installation screen NOT the 7.1.2 download screen because now I remember it asking me to INSTALL it, .... definitely installation screen.
So new question: even though it appeared to not finish installing before I rebooted it, do you think all is fine now? Thanks! -
Sound plays through Matrox MX02 instead of Komplete Audio 6 USB Device =(
In Adobe Premire Pro CC I can't use my NI Komplete Audio 6 usb device for playback. Instead sound always comes out of my Matrox MX02 when I'm scrubbing or playing.
Under Preferences -> Audio Hardware -> Default Device I have selected Komplete Audio 6. When I hit ASIO settings it brings up the expected Komplete Audio 6 Control Panel.
Under Preferences -> Playback -> Audio Device I see options for Adobe DV, Adobe Desktop Audio, and Matrox Player but no Komplete Audio 6.
My system is a custom built Windows7 PC. Any advice on getting sound out of my Komplete Audio 6 instead of the Matrox MX02 would be much appreciated!the komplete audio 6 seems more problematic than expected.
Preferences -> Audio Hardware -> Default Device -> Premiere Pro WDM Sound causes stuttery playback. I've tried enabling/disableing "Device 32-bit Playback" under ASIO settings and I've also ensured that the buffer size (256 samples) is the same as in my Komplete Audio 6 Control Panel.
Preferences -> Audio Hardware -> Default Device -> Komplete Audio 6 audio playback is fine but if I alt-tab away from PPCS6 the application will freeze as I describe in this thread: http://forums.adobe.com/message/5412540#5412540 ...
I'm running the latest driver/control pannel from Native Instruments (3.1.0) and the latest firmware has been flashed to the Komplete Audio 6 (45). -
Linux 3.2 sound plays through HDMI and laptop speakers simultaneously
As topic says, laptop speakers is not muted when activating sound through HDMI. Downgrading to 3.1 solves the problem. The laptop is an Asus UL30a.
Last edited by KlavKalashj (2012-01-20 08:52:49)natestar13 wrote:
Are you using Alsa or PulseAudio to configure your audio settings? The Arch Wiki has extensive tips for both. You might need to set a default audio output
https://wiki.archlinux.org/index.php/Ad … chitecture
https://wiki.archlinux.org/index.php/Pulseaudio
I am using Pulse Audio (and KDE). It's all correctly setup, it has been working for several months and it works if I downgrade kernel to 3.1, so it's a regression with the new kernel. Also, if any mods are reading this, maybe thread should be moved since 3.2 is out of testing.
Edit: It's quite weird. If I go to KDE sound settings and change them around a couple of times, after a while it works like it should. There is no consistency in this and I have no idea how to troubleshoot
Edit2: Could this be related? I know it's for Nvidia cards, but in the first comment he mentions hda_intel.chttps://bugzilla.kernel.org/show_bug.cgi?id=42567 I should probably have mentioned in the first post that my laptop is all Intel:
oscar@arch-laptop: [~] >>> lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Last edited by KlavKalashj (2012-01-20 18:35:26) -
ATV 3 has no sound played through pioneer receiver
Prior to the latest software everything worked fine.
Now when ever playing a movie from apple tv 3 there is no sound from any HD movie in itunes. These movies have two sound tracks a surround sound and a stereo. The movie starts and there is no sound, i need to go into the sound option for the movie and set it to stereo and resume playing then go back into the sound option and set it to surround and then i get 5.1.
Any help as to why it will not play straight away would be great.-Make sure a case is not covering the speaker.
-Is your iPhone on mute?
-try restarting your iPhone or restroing it.
Maybe you are looking for
-
help
-
"Serious Problem in Struts" + "Please help me"
Hi all, I m facing one problem in struts. I have A DTO with Attributes(data transfer Object) which contains one Array List. In that Arraylist i have other B DTO with Attributes. In my Screen I have fields which are using some of the attributes from A
-
I am using Firefox 6.0 with Win 7.After upgrading from Vista to W7 and updating my various programs and drivers I found Bing set as my homepage and default search engine. I changed them both and they are okay now, but new tabs open with a Bing search
-
How to put space between 2 cellFormat ?? Also, how can we increase the width of the lines of the table(in my custom jsp page) in the property inspector where Region Style is "Table". Brgds, Jenny
-
User-authorized only values in matchcode
Hi people, I get a strange behaviour of the BEx variable Input matchcode. I implemented 2 Multiproviders, containing a common authorization on an characteristic. The authorization variable is "ready to Input". In the first multiprovider, when I launc