"Capture encountered a problem reading the data" ANYBODY HAVE AN ANSWER?

"Capture encountered a problem reading the data on your source tape..."
How do I get FCP to capture the footage? The tape is fine as far as I know. When I play the tape it shows up in the capture window, but when I click capture "Now", it'll capture 2 seconds, stop, then give the message:
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved."
Any help would be greatly appreciated.
Mac OS X (10.4.9) 2 GHz PowerPC G5, 4 GB DDR SDRAM
Kazinako
I have a Sony TUV 900, and this camera and this FCP have worked together in harmony for many years until recently. I have no external hard drives, only internal hard drives. The firewire goes out of camera and goes into back of computer. The tape plays fine in my TUV 900 camera, (where the tape was originally recorded.)
I recently read on this forum where someone said they:
"Actually, I just had to switch to NTSC in the easy setup menu. I could have sworn I did that last night but I guessed I missed it. Anyway, I can capture now."
I would appreciate any advice on this subject.
Thanking you in advance, Michael Kasino

Try another device-- deck or camera to eliminate that possibility.
So I did this and now suspect the camera...
I tried another camera, and I still encountered the problem, (probably because of tape damage at this point), But the ALT camera did a much better job and digitized over areas the TUV 900 could not.
Now, I agree it is a camera issue. It could be 'bad tensioning' in the cassette, or my tape transport in the camera could be 'slacking the tape'. (I was using a Maxell Minin DV rewinder recently.
Is this camera even worth repairing, or even able to be repaired? ( $3-500. ?)
Am I better off getting a newer model at this point?
Also I am seeing ALOT of 'artifacting', big blocky elements of distorted image to the left side of my screen during and on digitized clips. (Could the head be going south?)
Any thoughts helpful.
MK

Similar Messages

Capture encountered a problem reading the data source tape .

FCP 4.5
SONY DSR-20 deck
dual 1.5GHZ
There are sound drop-outs on my source NTSC mini-dv tapes
the time-code looks pretty steady in the DSR-20 deck display
however i keep getting the following message when i try to digitize:
"Capture encountered a problem reading the data on your source tape.
This could be due to a problem with the tape. Capture has been aborted
and your clip has been saved"
I've tried setting Device Control to "Non-Controllable Device" and trying to capture video ONLY [the drop-out is mainly in the sound] which has generally solved this problem in the past but to no avail.
The same message comes up.
I realize my source tapes are messed up but how to work around it?
any advice please !
thank you

The most direct work-around is to play your DV tape through the analog outs on some device and to bring the signal into a a/dv converter and to capture using 'capture now/non-controllable device'
I'm doing this as I write. A student, who did not know any better, recorded on LP mode and the timecode (and recording in general) is nearly unusable. This is the only way I've been able to get it into the system. It ain't pretty but you will have the material.
You are correct when you inquire that there will be no time code and the material will take a 2 conversion hit.
Good luck.
x

Capture encountered a problem reading....

I know that this issue has been beaten to death but none of the responses seem to help.
I am consistently getting the following error message: "Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. To capture as much footage as possible, please capture a clip that ends before this segment, and another one that starts right after it."
I have tried different cameras as playback devices without success.
When I use "Capture Now" I get the following message: "Capture encountered a problem reading the data on your source tape. Capture has aborted and your clip has been saved."
Imovie seems to import the same "problem tape" without an issue.
I have capture at least one tape without a problem. On some tapes after the above message occurs I am able to get past the "bad spot" and continue to capture. On other tapes the message keeps occurring.
I have dubbed a problem tape but the error message continued to appear at the same spot in the tape.
Most footage was taken using a SONY TRV 900.
QT is up to date
I do not believe this is a TC issue.
I have also tried different firewire cables.
This problem is making my attempts to capture over 100 tapes simply impossible. Is there any reason to believe that using a deck (rather than a camera) would eliminate this problem?
NOTE: I had one tape that captured fine. However when I start getting the above errors, even the "good tape" generates the error (when it previously captured fine.)
Are there certain files that can be getting corrupted that I can trash?
Is there any workaround that would force FCP to capture the tape?
Mac Pro 2.66/FCP 6.0.5

PROBLEM SOLVED!
Hi Daisydaisy, I also was struggling with this same problem and found your post when I was doing research. I would like to share the solution I found with you. I also use a Sony TRV-900 which I have owned for 9 years.
I had my camera professionally cleaned and serviced. Besides being cleaned, the gears that turn the tape were tweaked and set back to the correct specifications.
I had used tape head cleaner I bought at camera stores to clean my camera, but that was not good enough.
I can now digitize without any problem.
There is one catch. The tapes I shot with my camera before I had it serviced play back fine, BUT still can not be digitized without getting the 'can not read source tape' error message.
All new tapes recorded with the camera AFTER it was PROFESSIONALLY CLEANED and had ROUTINE MAINTENANCE digitize perfectly without any error.
I've seen this problem crop up on other message boards when I was doing research into this problem, and there never seems to be any solution to this. I finally found a message forum from 3 years ago, in a deep Google search, where a guy solved this problem by having his camera professionally cleaned and serviced. I took his advice, and it solved the problem of 'CAN'T READ SOURCE TAPE'
BRAVO! FINITO!
By the way, I went to a place in Burbank, California called TEK Media Group. There phone number is 818-244-4440
It cost me $350 to have the camera cleaned and serviced. They said the the drums were dirty and the tension was off too.

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my p

I am having trouble with the cache in bridge. When i open I get a message saying bridge has encountered a problem reading the cache try purging in the central cache to correct the situation. I did that but now when I try to get to the folders where my photos are stored bridge never gets to where I can work. The message appears "building criteria" and I get an endless loop on the lower left panel. How do I correct?

You correct it by leaving Bridge alone until it finishes rebuilding its cache, overnight if necessary.

The infamous "Capture encountered a problem" once again

Hi all, I'm sorry to bother you with an often discussed issue but I haven't found any solution yet, it's driving me crazy and I desperately need someone's help.
"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved"
This problem occurs only seconds after starting the capturing process. Regardless of where on the tape I start. My camera is a Canon XL1s, but I also encounter the capture problems with my Sony consumer cam.
Ok, what have I tried so far:
- capturing the footage using the "non-controllable device" setting.
- Preferences - advanced - switch off the "abort when dropped frames etc" setting
- replaced the Firewire cable
- using iMovie to capture This seems to go well, but after the capture the program crashes.
Any other suggestions? I have to mention that I have used the "movie" setting on my camera. This similar to the "progressive" mode on Panasonic cameras.
Thanks a lot for your help
Siebe

Are you using capture now? I found I get the best result by logging the clips first.. making sure the "in" setting is at least a few seconds in from any possible glitch in the tape (new scene or blue screen) and using batch capture.
This also seems to work better on one of my cameras than the others with the same tape.. so try it on both..
Dont know if that will work for you.. but its the best I was able to come up with for me!

FCP error message: Unable to read the data on your source tape!

Hey,
So I have been editing on the MacPro now for over a year and I have never seen this message before...the message reads:
_*"Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape."*_
Has anyone got this message and could help me out please? I need to edit these tapes A.S.A.P.
Thank You,
Erick

why would it start a month later giving me problems instead of when it was updated?
That is a good point. Anything change since the time it worked to when it didn't? How about trying another firewire cable. Those can go south without notice, might cause this.
Shane

Capture encountered a problem

I had a shoot in Antigua and ran into some audio drop out problems. Now I am try to capture tapes and I am getting the below message.)
Capture encountered a problem reading the data on your source tape. This could be due to a problem with the tape. Capture has been aborted and your clip has been saved.
Power Mac G5 Dual 2.0

I'd just check the playback and the timecode to make sure it's accurate. If it is, I'd go on and edit the saved clip.
Could be caused by so many different things... dirt in the camera when it was shooting, bad tape, dirty heads on the playback device...
Jerry

Problem reading pasted data

I am copying cell text from a google docs spreadsheet to a multi-column script. A few attempts seemed to work fine but now I get an error " Sorry, Adobe Story encountered a problem reading the pasted data"
This occurs on Firefox and Safari. Restarted each with same result. Copy and paste works fine with all other apps.
I am running Mac 10.8.4 on rMBP.
Testing Story and no cut and paste from Google docs is a no go.
Thanks for the help.
Jeff

Hi Jeff,
Are you facing this issue with some specific data set? If yes, could you please send across a sample of it for us to look into it.
If not, please save the stdoc of the script into which you are trying to paste the data (File->Save to disk). Also in this scenario please try creating a new script and pasting in it . Let us know if it makes a difference.
[ Documents can be sent to "AdobeStory-Support 'at' adobe 'dot' com" ]
Thanks
Rashi

There was a problem reading the layer data. Read the composite data instead?

I can't open my psd with properly in Photoshop, it keeps showing :There was a problem reading the layer data. Read the composite data instead?
Photoshop cc
Help please

I just discovered this issue. Apparently if your PSD document has a tonne of layers, it will save normally. Then suppose you are working on it one day, and create lots of new additional layers...saving that will then corrupt the PSD file, as apparently the number of layers exceeds some hidden limit. You will not be able to load that back in, as Photoshop doesn't appear to allow you to do that.This issue appears for both PSD & PSB files. I lost a few weeks of updates, but recovered thanks to a few backups.
One clue you can use to ensure you don't inadvertently save over the file (thereby corrupting it), is to try duplicating a layer or a group of layers. You will not have the option to do so. If you encounter that, immediately open a new file, and drag a few groups of layers to the new document (and deleting them in the original document). You should then go back below the 'limit', allowing you to save normally.
As for the original corrupted file, well I tried repairing it with a whole host of tools. But nothing worked ....
MacReady: Any way we can we fix it?
Garry: It's gone, MacReady.

Can't open file - error "There was a problem reading the layer data.."

I'm on a
Mac Pro, 10.5.7
PSCS3
I have been sent a file (148MB) from a client via FTP that I can not open. The file was created on a PC, using PSCS3.
I'm usually pretty good at troubling shooting but I have not seen this before.
Any help, suggestions would welcomed.
I get the following error messages: (see attached)

It looks like the atttachement did not work
Here are the error messages:
First message:
"There was a problem reading the layer data. Read the composite date instead?"
Second Message:
"Could not complete your request because the file is not compatiable with this version of Photoshop."

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication

I use LabVIEW 7.1 but I have some problem when, I use LabVEW to read the data from serial communication.
I use LabVIEW to read the data from serial communication then, i open the example (.vi) from Serial Communication - Advanced Serial Write and Read from LabVIEW Example. BUT it have some error message that : Error - 1073807202 occured at property node in visa configure serial port (instr).vi -> advance serial write and read .vi
this error code is undefined. no one has provide a description for this code, or you might have wired a number that is not an error code to the error code input.
I don't know why? please help me. thank you.

When I copy that code into "Explain Error" I get: "VISA: (Hex 0xBFFF009E) A code library required by VISA could not be located or loaded."
You may have a bad install of VISA or the wrong version of VISA loaded. Try re-installing VISA. You can get the latest version from the NI support site: http://digital.ni.com/softlib.nsf/webcategories/85256410006C055586256BBB002C0E91?opendocument&node=1....
Also ensure that you are not pointing the example towards a serial port that does not exist.
Please let us know what you find and what gets this working for you.
Rob

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. The notification should read the date and time you updated email receiving. Does anyone elsehave this problem?

Email syncs now say "Updated Mar 30", the day I upgraded to Lollipop 5.0. Two days later it is still saying Mar 30. The notification should read the date and time you updated email receiving. Does anyone else have this problem? Is there a solution to this?

We want to make sure your phone is in working order Mb_in_NC. I know it can be difficult when you see different times. What is your make/model of your device? When did it start? Do you have a different time on any other applications?
AmberF_VZW
Follow us on Twitter @VZWSupport
If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

Lightroom has encountered a problem reading this photo + error ???

Details
* The exact version of the Adobe Application you are running. Lightroom 1.0
* Your Operating System details: Windows XP Professional Version 2002 Service Pack 2
* Amount of installed RAM: 1 Gig
* Amount of free disk space: 31.9 Gig, 184g (second drive)
* Make/Model of Video Card: Nvidia Quadro FX500/FX600
* Printer Details if you have a print problem: No print problems
* The EXACT text of any Error Messages you saw:
"Lightroom has encountered a problem reading this photo" "You will not be able to make adjustments to this photo" & Error idx ! = 0 && -idx <=->top-L->base
* Precise symptoms of your problem
Attempt to load all RAW files from (Canon 10d & MarkII). First few folders imported are fine, after loading 10 or so folder all the files afterwords have the above error, if I remove all files, and reload in a different order files that were giving the error will load correctly, and files that loaded correctly before now load with errors.
Screen Captures for reference.
http://www.pbase.com/brahm/image/80870830/original
http://www.pbase.com/brahm/image/80870983

Here is a snippet from a discussion on another forum that includes a quote from Jeff Schewe, whom I consider to be a very good source for reliable information:
Look, I'll make it REAL simple...
TIFF = Good
PSD = Bad
PSD is now a bastardized file format that is NOT a good idea to use. Even the Photoshop engineers will tell you that PSD is no longer the Photoshop "native" file format. It has no advantages and many disadvantages over TIFF.
TIFF is publicly documented, PSD is not. That makes TIFF a preferred file format for the long term conservation of digital files.
And, let me be blunt, anybody who thinks PSD is "better" than TIFF is ignorant of the facts. If Adobewould let them, the Photoshop engineers would tell you to quit using PSD.

Photoshop CS5.1 Crashes Upon Opening: "Photoshop has encountered a problem with the display driver-"

Every time I try to open photoshop I get a window that pops up and says:
"Photoshop has encountered a problem with the display driver, and has temporarily disabled GPU enhancements. Check the video card manufacturer's website for the latest software.
GPU enhancements can be enable in the Performance panel of Preferences."
Then windows shuts the program down. The details of the problem are:
"Files that help describe the problem:
C:\Users\Owner\AppData\Local\Temp\WER70AD.tmp.WERInternalMetadata.xml
C:\Users\Owner\AppData\Local\Temp\WER9389.tmp.appcompat.txt
C:\Users\Owner\AppData\Local\Temp\WER9407.tmp.hdmp"
I'm on a custom Asus
I'm using Win7 Home Premium 64-bit
16GB RAM
Nvidia Geforce GTX 560 2GB video card
Intel i7 core 2.2 GHz
12 GB of memory
The error happens so quickly that I don't have time to do anything. Please help. >.< I've been on hold for *checks phone* 2 hours exactly. Wow. It is a legit copy and was working last month with no trouble. I've updated the drivers and tried a few solutions that have worked for other people that I found on Google (such as disabling CUDA and setting my "power management mode" to "prefer maximum performance" on my video card) but so far nothing has worked.
Thanks in advance!

It has stopped crashing because somehow it turned off "Enable GL Drawing" on its own because I could never even get a menu open. Not sure how it did that but I am grateful. I still get the error when I open Photoshop up but at least it hasn't crashed yet. At the time when it was crashing I never would have been able to get you the system info due to the speed that it was crashing upon just opening the program. In case you still need it:
Adobe Photoshop Version: 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch]) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
System architecture: Intel CPU Family:6, Model:10, Stepping:7 with MMX, SSE Integer, SSE FP, SSE2, SSE3, SSE4.1, SSE4.2
Physical processor count: 8
Processor speed: 2394 MHz
Built-in memory: 16361 MB
Free memory: 13322 MB
Memory available to Photoshop: 14694 MB
Memory used by Photoshop: 60 %
Image tile size: 128K
Image cache levels: 4
OpenGL Drawing: Disabled.
OpenGL Drawing Mode: Basic
OpenGL Allow Normal Mode: True.
OpenGL Allow Advanced Mode: False.
OpenGL Crash File: Detected.
OpenGL Allow Old GPUs: Not Detected.
Video Card Vendor: NVIDIA Corporation
Video Card Renderer: GeForce GTX 560M/PCIe/SSE2
Display: 1
Display Bounds:= top: 0, left: 0, bottom: 1080, right: 1920
Video Card Number: 1
Video Card: NVIDIA GeForce GTX 560M
Driver Version: 9.18.13.697
Driver Date: 20121002000000.000000-000
Video Card Driver: nvd3dumx.dll,nvwgf2umx.dll,nvwgf2umx.dll,nvd3dum,nvwgf2um,nvwgf2um
Video Mode: 1920 x 1080 x 4294967296 colors
Video Card Caption: NVIDIA GeForce GTX 560M
Video Card Memory: -2047 MB
Serial number: 92628077745082451425
Application folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\
Temporary file path: C:\Users\Owner\AppData\Local\Temp\
Photoshop scratch has async I/O enabled
Scratch volume(s):
C:\, 931.4G, 511.4G free
Primary Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS5.1 (64 Bit)\Plug-ins\
Additional Plug-ins folder: not set
Installed components:
   A3DLIBS.dll   A3DLIB Dynamic Link Library   9.2.0.112
   ACE.dll   ACE 2010/12/13-23:37:10   64.449933   64.449933
   adbeape.dll   Adobe APE 2011/01/17-12:03:36   64.452786   64.452786
   AdobeLinguistic.dll   Adobe Linguisitc Library   5.0.0
   AdobeOwl.dll   Adobe Owl 2010/06/03-13:43:23   3.0.93   61.433187
   AdobeOwlCanvas.dll   Adobe Owl Canvas   3.0.68   61.2954
   AdobePDFL.dll   PDFL 2010/12/13-23:37:10   64.341419   64.341419
   AdobePIP.dll   Adobe Product Improvement Program   5.5.0.1265
   AdobeXMP.dll   Adobe XMP Core   5.0   64.140949
   AdobeXMPFiles.dll   Adobe XMP Files   5.0   64.140949
   AdobeXMPScript.dll   Adobe XMP Script   5.0   64.140949
   adobe_caps.dll   Adobe CAPS   4,0,42,0
   adobe_OOBE_Launcher.dll   Adobe OOBE Launcher   2.0.0.36 (BuildVersion: 2.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   AFlame.dll   AFlame 2011/01/10-23:33:35   64.444140   64.444140
   AFlamingo.dll   AFlamingo 2011/01/10-23:33:35   64.436825   64.436825
   AGM.dll   AGM 2010/12/13-23:37:10   64.449933   64.449933
   ahclient.dll    AdobeHelp Dynamic Link Library   1,6,0,20
   aif_core.dll   AIF   2.0   53.422628
   aif_ogl.dll   AIF   2.0   53.422628
   amtlib.dll   AMTLib (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   amtservices.dll   AMTServices (64 Bit)   4.0.0.21 (BuildVersion: 4.0; BuildDate: Mon Jan 24 2011 21:49:00)   1.000000
   ARE.dll   ARE 2010/12/13-23:37:10   64.449933   64.449933
   asneu.dll    AsnEndUser Dynamic Link Library   1, 7, 0, 1
   AXE8SharedExpat.dll   AXE8SharedExpat 2011/01/10-23:33:35   64.436825   64.436825
   AXEDOMCore.dll   AXEDOMCore 2011/01/10-23:33:35   64.436825   64.436825
   Bib.dll   BIB 2010/12/13-23:37:10   64.449933   64.449933
   BIBUtils.dll   BIBUtils 2010/12/13-23:37:10   64.449933   64.449933
   boost_threads.dll   DVA Product   5.0.0
   cg.dll   NVIDIA Cg Runtime   2.0.0015
   cgGL.dll   NVIDIA Cg Runtime   2.0.0015
   CoolType.dll   CoolType 2010/12/13-23:37:10   64.449933   64.449933
   data_flow.dll   AIF   2.0   53.422628
   dvaadameve.dll   DVA Product   5.0.0
   dvacore.dll   DVA Product   5.0.0
   dvaui.dll   DVA Product   5.0.0
   ExtendScript.dll   ExtendScript 2011/01/17-17:14:10   61.452840   61.452840
   FileInfo.dll   Adobe XMP FileInfo   5.0   64.140949
   icucnv36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   icudt36.dll   International Components for Unicode 2009/06/17-13:21:03    Build gtlib_main.9896
   image_flow.dll   AIF   2.0   53.422628
   image_runtime.dll   AIF   2.0   53.422628
   JP2KLib.dll   JP2KLib 2010/12/13-23:37:10   64.181312   64.181312
   libifcoremd.dll   Intel(r) Visual Fortran Compiler   10.0 (Update A)
   libmmd.dll   Intel(r) C Compiler, Intel(r) C++ Compiler, Intel(r) Fortran Compiler   10.0
   LogSession.dll   LogSession   2.1.2.1263
   MPS.dll   MPS 2010/12/13-23:37:10   64.450375   64.450375
   msvcm80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcm90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940
   msvcp80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcp90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940
   msvcr80.dll   Microsoft® Visual Studio® 2005   8.00.50727.6195
   msvcr90.dll   Microsoft® Visual Studio® 2008   9.00.30729.4940
   pdfsettings.dll   Adobe PDFSettings   1.04
   Photoshop.dll   Adobe Photoshop CS5.1   CS5.1
   Plugin.dll   Adobe Photoshop CS5   CS5
   PlugPlug.dll   Adobe(R) CSXS PlugPlug Standard Dll (64 bit)   2.5.0.232
   PSArt.dll   Adobe Photoshop CS5.1   CS5.1
   PSViews.dll   Adobe Photoshop CS5.1   CS5.1
   SCCore.dll   ScCore 2011/01/17-17:14:10   61.452840   61.452840
   tbb.dll   Threading Building Blocks   2, 1, 2009, 0201
   TfFontMgr.dll   FontMgr   9.3.0.113
   TfKernel.dll   Kernel   9.3.0.113
   TFKGEOM.dll   Kernel Geom   9.3.0.113
   TFUGEOM.dll   Adobe, UGeom©   9.3.0.113
   updaternotifications.dll   Adobe Updater Notifications Library   2.0.0.15 (BuildVersion: 1.0; BuildDate: BUILDDATETIME)   2.0.0.15
   WRServices.dll   WRServices Thursday January 21 2010 12:13:3   Build 0.11423   0.11423
   wu3d.dll   U3D Writer   9.3.0.113
Installed plug-ins:
   3D Studio 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Accented Edges 12.0
   ADM 3.11x01
   Angled Strokes 12.0
   Average 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Bas Relief 12.0
   BMP 12.0.2
   Camera Raw 6.7
   Chalk & Charcoal 12.0
   Charcoal 12.0
   Chrome 12.0
   Cineon 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Collada 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Color Halftone 12.0.2
   Colored Pencil 12.0
   CompuServe GIF 12.0.2
   Conté Crayon 12.0
   Craquelure 12.0
   Crop and Straighten Photos 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Crop and Straighten Photos Filter 12.0.2
   Crosshatch 12.0
   Crystallize 12.0.2
   Cutout 12.0
   Dark Strokes 12.0
   De-Interlace 12.0.2
   Dicom 12.0
   Difference Clouds 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Diffuse Glow 12.0
   Displace 12.0.2
   Dry Brush 12.0
   Eazel Acquire 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Embed Watermark 4.0
   Entropy 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Extrude 12.0.2
   FastCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Fibers 12.0.2
   Film Grain 12.0
   Filter Gallery 12.0
   Fresco 12.0
   Glass 12.0
   Glowing Edges 12.0
   Google Earth 4 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Grain 12.0
   Graphic Pen 12.0
   Halftone Pattern 12.0
   HDRMergeUI 12.0
   IFF Format 12.0.2
   Ink Outlines 12.0
   JPEG 2000 2.0
   Kurtosis 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Lens Blur 12.0
   Lens Correction 12.0.2
   Lens Flare 12.0.2
   Lighting Effects 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Liquify 12.0.1
   Matlab Operation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Maximum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mean 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Measurement Core 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Median 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mezzotint 12.0.2
   Minimum 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   MMXCore Routines 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Mosaic Tiles 12.0
   Multiprocessor Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Neon Glow 12.0
   Note Paper 12.0
   NTSC Colors 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Ocean Ripple 12.0
   OpenEXR 12.0.2
   Paint Daubs 12.0
   Palette Knife 12.0
   Patchwork 12.0
   Paths to Illustrator 12.0.2
   PCX 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Photocopy 12.0
   Photoshop 3D Engine 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Picture Package Filter 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Pinch 12.0.2
   Pixar 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Plaster 12.0
   Plastic Wrap 12.0
   PNG 12.0.2
   Pointillize 12.0.2
   Polar Coordinates 12.0.2
   Portable Bit Map 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Poster Edges 12.0
   Radial Blur 12.0.2
   Radiance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Range 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Read Watermark 4.0
   Reticulation 12.0
   Ripple 12.0.2
   Rough Pastels 12.0
   Save for Web & Devices 12.0
   ScriptingSupport 12.1
   Shear 12.0.2
   Skewness 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Smart Blur 12.0.2
   Smudge Stick 12.0
   Solarize 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Spatter 12.0
   Spherize 12.0.2
   Sponge 12.0
   Sprayed Strokes 12.0
   Stained Glass 12.0
   Stamp 12.0
   Standard Deviation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Sumi-e 12.0
   Summation 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Targa 12.0.2
   Texturizer 12.0
   Tiles 12.0.2
   Torn Edges 12.0
   Twirl 12.0.2
   U3D 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Underpainting 12.0
   Vanishing Point 12.0
   Variance 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Variations 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Water Paper 12.0
   Watercolor 12.0
   Wave 12.0.2
   Wavefront|OBJ 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   WIA Support 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   Wind 12.0.2
   Wireless Bitmap 12.1 (12.1x20110328 [20110328.r.145 2011/03/28:10:30:00 cutoff; r branch])
   ZigZag 12.0.2
Plug-ins that failed to load: NONE
Flash:
   Mini Bridge
   Kuler
   Access CS Live
   CS Review
Installed TWAIN devices: NONE

Writing the file using Write to SGL and reading the data using Read from SGL

Hello Sir, I have a problem using the Write to SGL VI. When I am trying to write the captured data using DAQ board to a SGL file, I am unable to store the data as desired. There might be some problem with the VI which I am using to write the data to SGL file. I am not able to figure out the minor problem I am facing. I am attaching a zip file which contains five files.
1)      Acquire_Current_Binary_Exp.vi -> This is the VI which I used to store my data using Write to SGL file.
2)      Retrive_BINARY_Data.vi -> This is the VI which I used to Read from SGL file and plot it
3)      Binary_Capture -> This is the captured data using (1) which can be plotted using (2) and what I observed is the plot is different and also the time scare is not as expected.
4)      Unexpected_Graph.png is the unexpected graph when I am using Write to SGL and Read from SGL to store and retrieve the data.
5)      Expected_Graph.png -> This is the expected data format I supposed to get. I have obtained this plot when I have used write to LVM and read from LVM file to store and retrieve the data.
I tried a lot modifying the sub VI’s but it doesn’t work for me. What I think is I am doing some mistake while I am writing the data to SGL and Reading the data from SGL. Also, I don’t know the reason why my graph is not like (5) rather I am getting something like its in (4). Its totally different. You can also observe the difference between the time scale of (4) and (5).
Attachments:
Krishna_Files.zip ‏552 KB

The binary data file has no time axis information, it is pure y data. Only the LVM file contains information about t(0) and dt. Since you throw away this information before saving to the binary file, it cannot be retrieved.
Did you try wiring a 2 as suggested?
(see also http://forums.ni.com/ni/board/message?board.id=BreakPoint&message.id=925 )
Message Edited by altenbach on 07-29-2005 11:35 PM
LabVIEW Champion . Do more with less code and in less time .
Attachments:
Retrive_BINARY_DataMOD2.vi ‏1982 KB

"Capture encountered a problem reading the data" ANYBODY HAVE AN ANSWER?

Similar Messages

Maybe you are looking for