Capture Excise License through transaction J1ILIC01

Dear All,
When I am trying to create an excise license with license type CT3 (Quan. ment. NONE and desc - CT3 quantity based) and series group-domestic, creation date from today till end of next mth.
Problem comes when i enter ship to and sold to party of Deemed export sales area.
The system gives an error message "Enter valid Ship-to-party/Sold-to-party - Message no. 8I000".
Can anybody give me a solution to this problem.
Thanking you in advance for the solution.
Thanks and regards,
Avnesh Kamdar

Hi
give the customer number with zeros. ex cutomer number is xyz , u fill as 0000000xyz( its a 10 digit number)
regards
kedasu.a

Similar Messages

  • J1IEX - Capture Excise Invoice without Purchase order.

    Dear Gurus,
    when I am trying to capture Excise invoice through T-code J1IEX without PO (EWPO), I need to enter the material document (MIGO) No. but when I enter this is the error what I am facing.
    Error: The Document XXXXXXXXXX does not contain any selected items.
    What are the steps to be followed. (I have specified all the excise accounts perexcise transactions and also I have specified G/L accounts per excise transaction)
    Please guide me through this.
    Thanks & Regards!!

    Dear Gurus,
    Thanks for the replies.
    but the problem isnt solved yet
    1. I am not using movement type 501 for GRN and I am using 101 movement type.
    2. Even after updating the Part - I Register after using J1I5, when I enter the material document its not accepting.
    Please any more suggestions?
    How di I go ahed throuh this?
    Thanks & Regards

  • Excise Utilization through J2IUN

    Hi
    i am doing excise utilization through Transaction code J2IUN
    at the Utilzation screen balance appearing under Account Name PLABED is different that the actual GL Balance.
    in this respect i have another question that is, whether the PLA Balance is taken directly from GL Account or from any table.
    please help
    Regards
    Jyotsna

    Hi,
    Go to the change mode of Commercial invoice VF02 from there
    Go to> Header> Output
    In the dialog box maintian the output types for commercial invoice and excise invoice manually medium and press enter.
    Select the line item and press Communication method button
    Maintain Logical destination, Number of messages, Tick Print immediately/ Release after output (as required) Select SAP coverpage as "Print"
    Come back and save.
    Then you can see the output .
    Check and revert,
    Regards,
    Sharan

  • Number jump while post capture excise through J1IEX

    Sir,
    My client is facing a problem
    when they capture excise for captical goods through J1IEX
    the number is jumper over 50 number while saving
    they want to avoid such insident and how to solve
    plz give the solution is there is any possible to get back the nymbers again
    raghram
    Edited by: K. Raghuram on Jan 28, 2009 7:58 AM

    Hi,
    when if more than one users are doing the transaction system allocates a number range for every users, if anything like network disconnected at that time before poting it, then when u will again post that transaction system will take the next number that it has allocated before.
    regards
    jash

  • Excise invoice through J1IS transaction

    Dear Friends,
    At Manufacturing location, 1 unit of material for each Batch is issued for lab sampling. This is done through QA11 transaction with movement type 331.
    In Excise configuration, rounding off is activated and for all outgoing invoices, BED/ E CESS/ SE CESS values get rounded off to nearest value.
    While creating excise invoice through J1IS, since the quantity of material for lab Sample is very less and the excise duty values being calculated are negligible...Ex - 0.48/ 0.32.- for these values system is converting then as Zero. This scenario is applicable for various materials and for each unit for lab sample there is a material document generated.
    Excise invoice is created with reference to each of the material document and the values are being nullified due to rounding off.
    If we change the config settings and deactivate rounding off, then this will also have impact on outgoing excise invoices created through J1IIN transaction.
    Is there any possobility that I can consolidate all the material documents and then rounding off logic is applied on final value?
    Regards,
    Praveen.

    Hi,
    Deactivate the rounding in config and create the routine for rounding the values and assign it against the excise conditions in the pricing procedure as a alt calc type.
    Regards
    Sunil

  • Default vendor is coming in J1IG transaction while capturing excise invoice

    Hi,
    While capturing excise invoice at depot by using J1IG transaction, i am getting default custom vendor automatically.
    This is for STO transfer i am capturing excise.
    I have maintained some other custom vendor in the p.o.
    Pls. let me know from where it is picking the default vendor?
    Thanks
    Regards
    Rifaie.M

    Thanks

  • Capturing CT-3 license details in j1ilic01

    Dear All
    I am not able to capture license details in J1ilic01 with the Ship to party and Sold to Party code. This case is for customer created in Deemed Export category.
    Kindly give your suggestions.
    Thanks

    In J1ILIC01, please prefix the sold-to party and ship-to party  with ZEROS. This will solve your problem.
    Regards,
    Anbu

  • Capture Excise on Purchase through 1st Level and 2nd Level

    Dear all,
    Please clear about the  Functionality to Capture Excise on Purchase through 1st Level and 2nd Level Dealer Invices in details please.
    Regards,
    Vishal

    hi,
    for dealer invoice we first do j1iex here we capture the excise duties
    then we do migo &
    again we do j1iex to post the excise invoice.

  • Purchasing Adobe Font Folio 11.1 through Transactional Licensing Program (TLP) can have access to download the Adobe Font Folio 11.1 package from Adobe.

    Purchasing Adobe Font Folio 11.1 through Transactional Licensing Program (TLP) can have access to download the Adobe Font Folio 11.1 package from Adobe.

    Err, so I thought this would be an easy question...not so?

  • Capture excise invoice for GR without PO

    Hi,
    I am trying to capture the Excise Invoice for a material without PO.
    All J1ID entries are maintained for Material, Chapter ID, Vendor, plant etc.
    The procedure followed is below:
    1. Received the material with Mvt Type 503 Q through MIGO > Goods Recipts > Other. Excise Invoice tab is maintained as 'No Excise' while doing receipt.
    2. Posted Part-1 using T-Code : J1I5.
    When I am trying to Capture Vendor Excise using T-Code J1IEX > Capture Excise Invoice > Good Receipt (R05) and enter the Material Document Number (created by step 1), system is giving an error
    "Document xxxxx xxxxx   does not contain any selectable items"
    Did I follow the correct procedure ? Is there any other method for capturing this entries ? Am I missing any configs or master data maintenance ?
    Please give your valuable suggestions
    regards
    Arun.

    Dear Arun R,
    You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
    SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
    Hope this will help you out.
    Regards
    AKS

  • Capture Excise Invoice for Returns delivery

    Dear friends,
    Once the returns sales order is created and followed by returns delivery, we need to capture the excise invoice for it. Can anyone kindly guide this process. What will be the T.code for capturing excise invoice in this scenario and pls explain the process.
    Points assured
    regards
    Krishna.C

    Hi,
    We have had the same problem way back in 2003. But SAP has suggested to post a manual JV entry through J1IH or through J1IS. I dont remember which one of the above 2 transactions we have used.
    Also have a look at the SAP notes.
    Kind Regards
    Chakradhar

  • Error message of Excise invoice has no matchin lines while capturing excise

    hi CIN gurus
    I ma facing a problem Whil capturing excise at depot. error message appearing as Excise invocie no matching lines.
    This problem occurs even after entering appropriate internal number in J1IG.
    And this problem is occuring randomly .
    This occurs for STOCK TRANSFERS FROM DEPOT TO DEPOT.
    CAN ANYONE COME OUT WITH SUGGESTION
    rgds
    BJ

    Hi,
    Refer to SNote Note 1382678 - Pop-up to select Excise Invoice in J1IH/J1IIN cancellation.
    Symptom
    While cancelling outbound Excise Invoice through the transaction J1IH or J1IIN, system always picks up the first excise invoice even when multiple excise invoices are present with same excise number and year.
    Regards,

  • J1IEX Capture Excise Error

    Dear SAP Gurus,
    When we are Capturing Excise Invoice in J1IEX with ref to GR , then the system is throwing an ABAP run time error...
    Divide by 0 (type F) In program "SAPLJ1IEX"        Please suggest.

    hi
    check out this sap notes can help
    1360320 Enabling SED for import procurement (used for Health Cess) 10.08.2009
    2. 0.260 XX-CSC-IN-MM 1280234 Reduction of visible length of fields in J1IEX (ECC 5.0 &up) 03.08.2009
    3. 0.290 XX-CSC-IN 1346926 Disabling Excise invoice no & date in change mode in J1IEX 10.06.2009
    4. 0.300 XX-CSC-IN-MM 1164326 Cancellation of excise invoice is not possible through MIGO 29.04.2009
    5. 0.290 XX-CSC-IN-MM 1285986 Excise amount appears wrongly in Credit due column in J1IEX 12.03.2009
    6. 0.300 XX-CSC-IN-MM 1307617 RG23C PART2 & accounting entries posted from J1IEX not same 27.02.2009
    7. 0.410 XX-CSC-IN-SD 1254046 Maximum of 6 long texts possible in J1IEX for ARE1 creation 22.12.2008
    8. 0.240 XX-CSC-IN-MM 1155547 NCCD on customs duty in case of imports as per Budget2008 04.09.2008
    9. 0.240 XX-CSC-IN-SD 1014967 ECS and other duties in ARE1, ARE3 transactions and reports 25.01.2008
    10. 0.250 XX-CSC-IN 719154 Search help for subtransaction type along with its text
    1033650 Budget 2007-08 (SECess) changes for J1IEX /MIGO 20.06.2007
    12. 0.250 XX-CSC-IN-MM 1033731 Budget 2007-08 changes for Imports 13.03.2007
    13. 0.330 XX-CSC-IN-MM 1019973 RG23C serial number skips due to rounding-off error in J1IEX 20.02.2007
    14. 0.260 XX-CSC-IN 1005757 Batch split issue when capturing EI and GR done seperately 28.12.2006
    15. 0.250 XX-CSC-IN 838395 J1IEX does not fetch Invoice for part 2 Posting 19.04.2005
    16. 0.240 XX-CSC-IN-MM 584370 Corrections in the area of procurement for India 06.01.2003
    17. 0.250 XX-CSC-IN-MM 546749 Incorrect Excise Duty defaulted in J1IEX

  • Settings for capture excise invoice in MIGO and other settings

    Hi,
      For excise invoice capture and post procedure which we are following is as follow
    1 : For Local Excise invoice
         After receving goods from Vendor  first we are Doing J1IEX Part 1,  Capture excise invoice  after saving this we are getting part 1 number,  then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality  afetr that we are doing J1IEX  poat  PART 2  here we are getting part 2 number  then invoice verification,
    2 : For import PO
          First MIRO for custom delivery cost we are getting MIRO number,  then J1IEX part 1 ref. to MIRO number and year  then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
    now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
    regards,
      zafar

    hi
    >is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
    yes u can use both simultniously
    but in MIGO if u capture,  the step of updation J1i5 will be ommited (it will take palce automatically)
    like currently ur doing capture >update >post
    in migo only capture and then post
    >second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
    You can do capture and post simultaniously in migo only
    the separate transaction is given as persons or users  may be diffrent for GR and excise
    if the same user want to do the GR and cap and posting then yes he can
    for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
    regards
    kunal

  • Capturing Excise details for CENVAT in Stock Transfer

    Dear Gurus,
    Our requirement is that we have 2 manufacturing plants and first plant sends a semi finished product duly paying all Excise duties, to the second plant and they receive it to manufacture a finished product and sell it from there.
    Both the plant are under the same company code.
    First plant raises a Stock Trasfer Delivery doc with Excise Invoice and sends the goods to the second plant. Second plant captures the Excise duties through J1IEX_C, so these duties can be availed for CENVAT credit.
    I have created Plant 2 as a customer and Plant 1 as a Vendor. Also maintained 'Shipping data for Plants' for both the Plants. I am not able to do J1IEX_C, as the system is saying Maintain Vendor for the Customer 'ABC' attached to Supplying Plant 'ABC'.
    Kindly let me know what have i to do to successfully create STO and allow the second plant to capture the excise duties for CENVAT credit purposes.
    Thanks and regards.
    Venkat - Hyd.

    Thanks Ravi or Raj, did that, but that has not solved the problem. Anyways since no inputs am closing the thread.
    Warm regards.
    Venkat - SD

Maybe you are looking for