Capture Frame in CS4 MAC

It appears from my searches that it is a very complicated task to capture a frame in CS4 MAC. In CS4 Windows you have the bitmap option on capture media but that does not appear for MAC. It will not let me uncheck capture video without a nasty note saying it cannot be done. Any clues. This (as it was in CS3) should be pretty easy...am I just missing something?

If by "capture" you mean "export" then see the section
Export a still image in the Premiere Pro Help for instructions.
Cheers
Eddie
PremiereProPedia
RSS feed)
- Over 350 frequently answered questions
- Over 300 free tutorials
- Maintained by editors like
you
Forum FAQ

Similar Messages

How do I unthread text frames in CS4 InDesign Mac?

I've looked everywhere and tried what I found in Adobe help. I can't FOR THE LIFE OF ME figure out how to unthread text frames in InDesign CS4 [Mac].
Please help. I know it must be simple.
Thank you,
Margot

Run the SplitStory scipt thats in the samples in the scripts panel.
A waord of caution, though. Splitting a threaded story caused ID to treat the text at the top of each frame as a new paragraph, even if it was caninued from a previous frame. This can result in unwanted changes like an indent, if such is called for in the paragraph style, or an extra number or bullet item in a list.

Can't capture frame?

Can't capture frame.

My as/400 eth's mac is 4242.4242.0640,so I think the correct config of dlsw partner is
2424.2424.6002. If I config 2424.2424.6002,the mac can't be found. if I config
4242.4242.6002,the mac can be found. Like something is error,DLSw is try to chang my MAC
addresses between canonical format and noncanonical format, but it only change the last two byte. And you can see,dlsw can translate correctly the destionation of as/400 0200.0000.4080 to router's vmac 4000.0000.0201.
interface Serial0/0
no ip address
encapsulation sdlc
no ip mroute-cache
no keepalive
sdlc role secondary
sdlc vmac 4000.0000.0200
sdlc address 01 xid-passthru
sdlc partner 4242.4242.6002 01
sdlc dlsw 1
interface Serial0/1
no ip address
encapsulation sdlc
no ip mroute-cache
no keepalive
sdlc role secondary
sdlc vmac 4000.0000.0400
sdlc address C1 xid-passthru
sdlc partner 2424.2424.6002 C1
sdlc dlsw C1
router a#sh dlsw rea mac
DLSw Local MAC address reachability cache list
Mac Addr status Loc. port rif
4000.0000.0201 FOUND LOCAL Serial0/0 --no rif--
4000.0000.04c1 FOUND LOCAL Serial0/1 --no rif--
4242.4242.6002 SEARCHING LOCAL
DLSw Remote MAC address reachability cache list
Mac Addr status Loc. peer
4242.4242.6002 FOUND REMOTE 10.8.1.1(2065)
2424.2424.6002 SEARCHING REMOTE
router a#sh dlsw cir
Index local addr(lsap) remote addr(dsap) state uptime
3556770440 4000.0000.0201(04) 4242.4242.6002(04) CKT_ESTABLISHED -

DV Capture with Premier CS4

Getting typical field combing effects when viewing and capturing with premier CS4 capture screen on LCD monitor. Using Sony TRV320 into firewire with a four pin to 6 pin firewire cable. Previously used Premier pro 1.5 on another computer with same camera and 4pin to 4pin cable with no problems. Could the firewire card or cable be causing such problems or might it be premier CS4? Have tried all clip and sequence settings but they don't seem to affect the capture settings.
Thanks.

Thanks Jim for your answers and quick reply. The other computer I have must do something to the frames before sending them to the LCD monitor because there are no combing effects.

InDesign CS4 Mac starts but then freezes

Indesign CS4 Mac starts up but freezes from there. Trying to open files or create new ones results in the filename appearing at the bottom of the Window drop-down menu, but the file doesnt appear on-screen.
The same result occurs when opening files using "Open Recent File" as well as double-clicking the file in Finder or using "Open With" in FInder.
It couldnt have picked a worse time to crap out - right in the middle of an urgent contract!! Dang Cleetus!!
Any suggestions - apart from re-installing the program?
Cheers,
John

Tried renaming InDesign Saved data and InDesign Defaults and restarting InDesign - that didnt seem to fix the problem - after re-starting InDesign it seemed the program didnt write new versions of the files on re-start.
Will head back to the office & connect to my 23" display & see if ID works OK with that - that would confirm that it's a screen pointing issue?
Would re-installing ID help?
Cheers,
John

InCopy CS4 (PC) / InDesign CS4 (mac) not working

My client and I are trying to establish an InCopy CS4 (PC) / InDesign CS4 (Mac) workflow. Neither of us has ever used InCopy and we are all getting frustrated now that our first production cycle has come and gone and the client is not recouping the money they invested on this software. Our trial system was successful for awhile and then it just stopped. The client says she can't open the icma/icml files and they need the indd file. So I send a new batch of files with the indd included and still no luck.
I'm saving the assigments like I've been saving in our initial trial run. In ID I go to Incopy > Export > Add all Stories to Assignment. That creates the content folder and the .icma files. I zip everything and send it off via email attachment.
Is there something I am doing wrong? Something my client needs to do? I prefer not to have to send the indd file. Should I have to do that for them to edit in Incopy? I appreciate any advice. Thank you. Lynn

Don't zip the files, that won't work.ID/IC is meant to work on a local server w/local staff. For a remote workflow you have to use a special technique.
After you create the assignment, use the Package for InCopy command in the Assignments panel.That creates an ICAP file that you send to the client.
When the double-click the ICAP file, it unpacks (it's like a zip file) on their computer and the assignment opens in InCopy. They work on the stories, and when they're done, they use the Return for InDesign command in *their* Assignments panel menu. That creates an IDAP file that they send to you.
When you open the IDAP file, it unpacks, looks for the INDD file (be sure not to rename or move it in the meantime), and updates the stories w/the editors changes.
Those are the broad strokes. It's covered more thoroughly in the online help file of both ID and IC ... you *and* your client should read up on it. And I cover it very thoroughly (4 videos ... Chapter 15) in my online Lynda.com tutorial on the CS4 workflow:
http://www.lynda.com/home/DisplayCourse.aspx?lpk2=651
(Chapter 15 isn't one of the freebie chapters, but you (or anyone) can use my 24-hour free pass for full access to their entire training library: http://lynda.com/freepass/amconcepcion)
AM

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up?

When I capture a still frame froma video in Llightroom 4.3, where does the captured frame end up? I cannot find it. Stan

It will be right next to the movie in your library and the jpg file will end up on your hard disk right next to the movie file. You can see the actual file by right (or control) clicking on the image in the library view and selecting "show in Finder/Explorer"

CS4 Mac Compatibility

I'm sure I'm asking the obvious, but since I'd like to
upgrade to CS4, I want to make sure before I buy.
The system requirements for Flash CS4 (Mac) mention Mac OS X
v10.4.11–10.5.4. I have OS X 10.5.5.
Does this make any difference?
Please reply when you get the chance.
Thank you,
Peter

probably export from pc to something decent and import that to mac...
might be best solution
ps...just built this camera and fcp on mac does good job of using QT intermediate files etc for editing...even with prores...and so on...
theres no such thing as "pc vs mac" ...its more like "what works well "...and in the long run ( I might add ) its probably dpx stuff for final...which neither one has a handle on at this point...

Adding frames in cs4 fireworks I can not find this.

Please
avise I cannot fine
where to add frames in cs4 fireworks.
Thanks BILL

Open the Frames panel, first. (menu Window > States) Yes, in Fireworks CS4, frames were renamed to states, but they work in the same way!
Then, see on attached file, where's the "Add new frame" icon in the panel.
Hope this helps!

Dreamweaver CS4 Mac – non-startup – Error: 150:30

Hi, any help would be appreciated.
Dreamweaver CS4 Mac – non-startup – Error: 150:30
"Licensing for this product has stopped working". Transferred to new computer via Time Machine back-up.
Thanks

See if anything here helps: https://helpx.adobe.com/creative-suite/kb/error-licensing-product-expired-cs4.html

ADOBE ILLUSTRATOR CS4 MAC pierde la ruta de las imágenes enlazadas

Hola,
ADOBE ILLUSTRATOR CS4 MAC pierde la ruta de las imágenes enlazadas, en cuanto lo gravas para originales. Si lo abres desde un cd tienes que volver a vincular, y puede crear confusión al proveedor ¿existe alguna solución? gracias

Hola creo que no me explicado bien,
Tu tienes una raíz de trabajo con archivo .ai y sus imágenes en una carpeta, lo gravas en un cd para el proveedor.
Abre el cd y el .ai no encuentra las imágenes, que siguen estando en la misma carpeta que hemos gravado. Por lo tanto tienes que tener desperdigadas
dentro de la carpeta de .ai, si no se pierde el enlace. También pierdes el enlaze se mueves la carpeta con todo el contenido. Es un error de programa los
demás programas no dan este problema. Se tiene solucionar.
Gracias

Licence Photoshop CS4 Mac

Bonjour.
J'ai récupéré Une installation de Photoshop CS4 Mac.
Or le transfert de licence n'a pas été fait.
Je désirerais acheter une licence pour cette application.
Comment faire ?
Merci
Cordiakement

Adobe ne vend pas la version CS4 plus. Seulement un propriétaire inscrit d'une licence CS4 peut transférer la licence à vous.

RAW-Converter CS4 MAC - "Benutzerdefinierte Einstellungen" nicht übertragbar

Im RAW-Converter CS4 MAC kann man zwar, wie gewohnt, mehrere Bilder synchronisiert mit denselben Einstellungen bearbeiten, wenn man aber nur ein Bild aus der Liste bearbeitet und dessen "Benutzerdefinierte Einstellungen" auf das nächste Bild übertragen will (nächstes Bild anklicken und in der Liste neben "Grundeinstellungen" auf "Benutzerdefinierte Einstellungen" klicken), so geschieh nichts! In CS3 funktionierte das! Weiß jemand Rat und Hilfe?

> Thomas, what camera? What version of Camera Raw? are all the pictures on
> the hard drive?
Thomas, welche Kamera? Welche Version von Camera Raw? sind alle Bilder auf
der Festplatte?
Ich habe CS4 in Windows. Damit kann ich die ACR Einstellungen speichern
(Save Settings) und beim naechsten Bild wieder anwenden (Apply Preset).
Leider kenne ich mich mit der deutschen PS Version nicht aus, kann daher die
beiden Kommandos nicht genau uebersetzen.
I have CS4 in Windows. With it I can save the ACR settings (Save Settings)
and apply them to the next picture (Apply Preset). Unfortunately, I am not
familiar with the German version of PS, therefore can't exactly translate
the two commands.
Juergen

Video Filter missing: AE.ADBE Fast Blur - Premiere Pro CS4 mac

Hi, I own the master collection package of the cs4 products for Mac, and I'm having this problem when trying to open a project made on premiere pro 1,5 (win). All files, effects and tittles where imported perfectly on my Mac after opening and saving the project on win premiere cs3. The only problem is the fast blur plugin. I get this error when opening the project on premiere cs4. I need to have the fast blur plugin working because I don't want to re-create the whole transitions of this 1 hr length project.
I tried copying the Fast_Blur.plugin from after effects and pasting it on my premiere pro plug-ins folder (/Applications/Adobe Premiere Pro CS4/Plug-ins) but with no luck, apparently premiere ignores it. Also tried to copy it to /Applications/Adobe Premiere Pro CS4/Adobe Premiere Pro CS4.app/Contents/Plug-ins/Common but this gave me several errors and the application not launching.
What can I do to use this plugin in premiere cs4 Mac?
Any help will be greatly appreciated!

Placed the afx cs4 Fast_Blur.plugin on /Applications/Adobe Premiere Pro CS4/Adobe Premiere Pro CS4.app/Contents/Frameworks/MediaCoreUI.framework/Fast_Blur.pluginand nothing... ignored as when placing it on Plug-Ins folder...
Where is this mediacore folder on win?
Thanks for the suggestion, but I think that the Mac CS4 afx "Fast_Blur.plugin" isn't comptible with the Mac CS4 Premiere.
I don't own a CS3 mac version... does anyone knows if it has the fast blur? I could try to use that file...

How to capture frame maximizing/minimizing event?

I have a requirement.
I have a JTable. The preferred size of the table should be set dynamically when the JFrame/window is maximized or minimized.
If the window is maximized the preferred size should be
     table.setPreferredSize(new Dimension(1200, 370
If the window is minimized then preferred size should be
     table.setPreferredSize(new Dimension(715, 370);
I thought of a solution like if I capture maximize / minimizing event then I can set preferred size accordingly. I need some help
to capture those events.
Or if any other solution can be given for this requirement means also it is fine.
Anybody guide me to capture frame maximizing / minimizing event

Hi,
I have coded my requirement as below:
mainFrame.addComponentListener(new ComponentListener() {                                           // frame where panel->scroll panel is fixed
               public void componentResized(ComponentEvent e) {         // captured the events by passing component listener
                    if (mainFrame.getExtendedState() == 6) {      // captures the window maximizing event
                         table.getTablePane().setPreferredSize(
                                   new Dimension(1250, 450)); // set required size
                         table.getTablePane().revalidate(); // revalidated.
                    } else {                                                                               // captures window restoring event
                         table.getTablePane().setPreferredSize(
                                   new Dimension(715, 450));
                         table.getTablePane().revalidate();
               public void componentHidden(ComponentEvent arg0) {}
               public void componentMoved(ComponentEvent arg0) {}
               public void componentShown(ComponentEvent arg0) {}
Thanks for everyone who helped me.

Capture Frame in CS4 MAC

Similar Messages

Maybe you are looking for