Capture in any format using VitualDub and TV@anywhere

I think the software that comes with this card is junk, i use virtualdub capture feature allowing me to capture in ANY format and codec saving TONS of hd space by capturing uing XViD format and MP3.
You can find it here and best of all its free....
Virtual Dub

In the Browser and assuming you are viewing in list mode, to the right of your clips listing you will see a bunch of columns -Media Duration, In Point, Out Point etc.
Scroll that further to the right and you will eventually see a column for Anamorphic. Remove the check mark, by clicking on it for each clip.
Go to the menu bar: Final Cut Pro > Easy Setup and choose the non-Anamorphic version of your video format. Menu bar again: Sequence > Settings > Load Sequence Preset. You should now be set up to edit in good old 4:3.

Similar Messages

How can u insert and retrieve text files in any format using forms6i.

how can u insert and retrieve text files in any format using forms6i.
can u give me an example of an insert statement, let's assume the file is located in the a:drive.
and retrieving the files, i would give the user a list of all the files that are in the database, the user would select one, but what command(or piece of code) would open the file in its apppropriate editor.
e.g .pdf formatted file would open in acrobat.
any help would be appreciated.
Thanks
Hussein Saiger

the filereference class is for downloading and uploading files.
if you want to load xml, use the xml class.
and, if you want to write to an xml file and don't want to use server-side code, wait.

Differnece between capturing campaign actual cost using PS and using COPA

Hi Experts,
Could anyone tell me the exact difference between capturing campaign actual cost using PS and using COPA?
Thanks!

Hello,
as far I understand these are different objects. The campaign is transfered to the project system as a WBS element, which may be integrated into COPA as well. Please refer to the online help:
Account Assignment to Profitability Analysis - Campaign Management - SAP Library
As far I know the COPA integration may work using WBS elements, but may also work from the conditions created from a campaign or trade promotion.
best regards,
Johannes

Any problem using bseg and bkpf tables

For fico details i using bseg and bkpf tables.
I noted that programming is very difficult because of these tables are cluster table.
plz give me other tables
if i using these tables any problem will come?

>
mysvijai197715 wrote:
> Hi Aniesh,
>
> BSEG and BKPF are cluster tables. It contains transperant tables like BSIS, BSIK etc. For example to take vendor details usr the BSIK.If you use BSEG and BKPF it will take long time search. suppose your concern having lot of data means may be your server will get shutdown. So use only trasnperant tables like BSIS, BSIK etc.
>
>
> Regards
> R.Vijai
Incorrect. BKPF is a transparent table and not a cluster table and you can use it just like any other transparent table. BSEG is a cluster table but there is no problem selecting from it so long as you use the key of BUKRS, BELNR, GJAHR - unless you are selecting a very large amount of data, but then this can cause problems when selecting from any type of table.
The advantage of using BSEG over the other FI line item tables such as BSIS and BSIK is that it holds all the lines of an FI document while the others will hold only a subset eg BSIK will only hold lines that contain a vendor reference and BSAS holds only cleared GL account lines. Though you can only use it when you have the key. If you need to search on vendor, you can use BSIK as a starting point, but since I usually need to get hold of all the lines on an FI document, I then have to select from BSEG anyway.

Cannot export in TXT formate using java and getting UnknownExportFormat exc

I am using latest jars fro java and i could create report in the following formats
u2022 _crystalReports
u2022 _MSWord
u2022 _MSExcel
u2022 _RTF
u2022 _editableRTF
but when i try to create in any of these formates hereunder
u2022 _text
u2022 _characterSeparatedValues
u2022 _tabSeparatedText
u2022 _XML
i am getting the following error
2010-05-26 10:36:25,534,,ERROR,com.crystaldecisions.reports.common Failed to load the resource 'UnknownExportFormat' from the bundle java.util.PropertyResourceBundle@39826.
java.util.MissingResourceException: Can't find resource for bundle java.util.PropertyResourceBundle, key UnknownExportFormat
at java.util.ResourceBundle.getObject(ResourceBundle.java:325)
at java.util.ResourceBundle.getString(ResourceBundle.java:285)
at com.crystaldecisions.reports.common.CrystalResources.loadString(Unknown Source)
at com.crystaldecisions.reports.common.CrystalResources.loadMessage(Unknown Source)
at com.crystaldecisions.reports.common.CrystalResourcesFactory.getLocalizedMessage(Unknown Source)
at com.crystaldecisions.reports.common.CrystalException.getLocalizedMessage(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(Unknown Source)
at com.crystaldecisions.reports.common.ThreadGuard.syncExecute(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.for(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.int(Unknown Source)
at com.businessobjects.reports.sdk.JRCCommunicationAdapter.request(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.a(Unknown Source)
at com.businessobjects.sdk.erom.jrc.a.execute(Unknown Source)
Could anybody please advise me this is not supported or if i am missing something.
Thanks in advance

This is expected behavior; the formats that do not work for you are unavailable in Crystal Reports for Eclipse. To get access to those formats you will need to use the managed version of the Report Application Server API; this is available in Crystal Reports Server, Business Objects Edge and Business Objects Enterprise.

Capture image with webcam using flash and sending it to the server

I have a need to use flash to capture an image and have that image uploaded to the server. I have seen some examples of code that uses flash to capture an image but it saves the file locally. We need that file to be sent to the server. We are using CF9.0 and I figure that once we are able to capture the image we could hand it off to ColdFusion to send to the server.
Has anyone done anything like that or know if it's possible?
Any help is apprecaited.
Thanks,
Mallory

It's not that hard...after you capture the image in Flash encode just send it via Remoting to a cfc as a bytearray or a bytearray encoded as Base64 string (and then decode it to binary in the CFC). I have had better luck with the latter way. You could also post the bytearray encoded as a Base64 string to a .cfm page as a form field.
For example in Action Script 3 you do something like this (assuming "frameBMD" is the BitmapData drawn from the video source):
var ba:ByteArray=com.adobe.images.PNGEncoder.encode(frameBMD);
var baAsString:String=com.dynamicflash.util.Base64.encodeByteArray(ba);
var saveImageResponder:Responder=new Responder(onSaveImageResult,onFault);
var rs=new NetConnection();
rs.objectEncoding=flash.net.ObjectEncoding.AMF3;
rs.connect("/flashservices/gateway");
rs.call("Headshot.saveImage",saveImageResponder,baAsString,1);
And your cfc would be something like this:
<cfcomponent displayName="Headshot" hint="Save a Headshot">
<cffunction name="saveImage" access="remote" output="false" returntype="string" roles="user">
<cfargument name="data" type="string" required="true" />
<cfargument name="user_id" type="numeric" required="no" default="1">
<cfset SavePathParent = ExpandPath("/data/users")>
<cfset SavePath = SavePathParent & "/user_" & arguments.user_id>
<cfif NOT DirectoryExists(SavePath)>
<cfdirectory action = "create" directory = "#SavePath#" mode="777">
</cfif>
<cfset theFilePath="#SavePath#/headshot_#arguments.user_id#.png">

<cffile action="write" file="#theFilePath#" output="#toBinary(arguments.data)#"/>
<cfset LOCAL.file_url="/data/users/user_#arguments.user_id#">
<cfreturn LOCAL.file_url/>
</cffunction>
</cfcomponent>
Anyway, that's the idea... hope that helps.

Is any one using Bootcamp and JAWS (screen reader)

I gave my roommate my MacMini Solo. We've installed Windows Home on it and JAWS 10 (Latest version. I don't know the version number other then it's 10.)
He is having some problems with JAWS. JAWS isn't always reading the full screen to him, or it will not let normal functions for him to work (alt-E for example).
Is anyone out there using Bootcamp with JAWS that can help? I am wondering that JAWS doesn't work right under the Intel video drivers.
-Locutus

Hi Locutus,
I personally don't use JAWS, but according to this thread http://discussions.apple.com/thread.jspa?threadID=2332504&tstart=60 at least on other person uses it successfully on a Mac Mini.
Are you using a USB-wired keyboard or a wireless on on the Mini ?
When opening the Device Manager in Windows (Control Panel - System - Hardware tab) are there any devices with a yellow exclamation mark shown ?
Did you used the OSX install DVD to install Apple BootCamp Drivers and did you update them afterwards with the avaiable Driver Updates from Apples website ?
regards
Stefan

Has there been any resolution using Plaxo and IMAC not able to sync

Does anyone have the resolution for PLAXO sync for IMAC? I have no issues with iphone of ipad only syncing with IMAC -

Has anything changed between now and the last time you had sync working? (upgraded iOS for example)
I am not familiar with this: "However, on itunes, the button that usually says "my device" in the top right". I don't see this on the latest release, what version of iTunes are you using?

MobileMe in system preferences and Airport extreme don't recognize my password. The password and username are correct. I don't have any problem using ICloud and my Apple ID and account

When I try to connect to MobileMe in system preferences, it keeps saying that my password or username is incorrect. The same problem occurs on idisk.mac.com and when I try to connect to the hard disk connected to my AirPort Extreme. I don't have any problem to access my Apple ID account or ICloud. My password and username are corrected (I have one principal e-mail and two alternatives e-mails in my Apple ID). I don't how to solve it. The biggest problem is that I can't connect to the hard disk on the AirPort Extreme USB entrance and share files and backup.

Place the iOS device in Recovery Mode and then connect to your computer and restore to factory settings/new iPod via iTunes. The iPod will be erased.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software

Use 3G and wifi

Is it possible to use the ipad in 3G mode and use wifi also?   The ipad is directly connected to 3G (AT&T). I have a wireless router in the house... not hooked to the internet.. Currently I have to turn OFF wifi to use 3G.... the router is for the wireless printer I am using. The setup is for an elderly couple that do not have INTERNET at their home. Any suggestions?

Unfortunately, by design, when the system sees a known wifi network, it will use that, and turn off the 3 g radio. The only way around that is to turn the wifi radio off.
If they only need the wifi for printing, then that will work, but is a pia, and will not work in you are trying to print a web page, or some other print job that needs the Internet.
I don't know what kind of 3 g plan they have, but a cheap broadband plan might make sense.   They will avoid any over use charges and get a lot faster and more reliable Internet access.

Had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbra

had some old movies from reel to reel on a vcr. i converted these to mp4 format using pinnacle video capture, quality was not great but it was decent enough on my computer. when i placed these on my ipad it was much worse and very choppy. i have handbrake and thought i could maybe change the movie so i could play it on ipad but dont know what dimensions or framerate etc. currently the movie on the computer is in 640 x 480 mpeg 4 aac. thanks derek

Jon,
What Julianne said at first about re-linking made perfect sense and I followed it easily, had actually already been there. But in my situation now, it didn't have any effect. The directory of folders which had already been added were still just as they were, and the outstanding balance are not in the desired position. And the folders which had been brought in earlier today when I clicked "synchronize folder", were still missing all the metadata.
Maybe this means I need to start over, and I'm fine about doing that that, but I don't know what it takes to accomplish that. I'm concerned now that any changes I make out of guesswork could only make the problem harder to resolve. It just feels to me like something I did at the beginning just wasn't right, and now it's a tangle.
Can you advise?
Thanks,
Gary

Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"

Everyting was perfect earlier. Used to convert all my videos into iPhone mp4 format using Any Video Converter - then add it to my iPhone 3GS. But last few days, I cant add video files to iTunes. and the iTunes doesnt even specify the reason except for that "files are not supported"
Everything is fine.
-They are the right format
-Quicktime is updated
-I have tried simply dragging them into the 'movie' library
-I have tried going to file<add file to library
Nothing works, has anyone else had this problem and found a way around it?
Any and all help appreciated.

In addition to Mike's suggestions, you only have 4GB of RAM and Mavericks does use more RAM than other versions. You may also want to look at the apps that startup on login and the possiblity of upgrading RAM.

I have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. please help

i have downloaded OS X Yosemite using recovery from boot but while installing error occuring showing unable to extract essential.pkg so can't install. problem is i have already formatted my drive and dont have any os right now. only the downloaded new os x yosemite in the os x base system. please help

Please try again after taking each of the following steps that you haven't already taken.
Step 1
Reset your computer’s PRAM.
Step 2
If your model has user-replaceable memory, and you've upgraded the memory modules, reinstall the original memory and see whether there's any improvement. Be careful not to touch the gold contacts. Clean them with a mild solvent such as rubbing alcohol. Aftermarket memory must exactly match the technical specifications of the machine.
Step 3
Back up all data to at least two different storage devices, if you haven't already done so. One backup is not enough to be safe. The backups can be made with Time Machine or with Disk Utility. Preferably both.
Erase and install OS X. This operation will destroy all data on the startup volume, so you had be better be sure of the backups.
Step 4
Make a "Genius" appointment at an Apple Store, or go to another authorized service provider to have the machine tested.

HT5148 I am using the trial FCP 10.0.8 and I get a quicktime error when I export to any format I get a quicktime -50 error. Any idea why this could be happening?

Hi, i am using the 10.0.8 trial version and trying to export a simple project to any format and get the Quicktime -50 error. Has anyone seen this before?

Often Times the 50 error means corrupt media. What is your original media and did you optimize?
Try this. Turn off Background Rendering in Preferences. From the File menu, and with your project selected in the Library, Delete Project Render Files. Close FCP and empty the trash. Open FCP and your project, With the Range Tool, select a short section of your timeline. Without rendering, export that section as a Pro Res Master File. If that works, It's likely that your project should be OK to export.
Russ

Format hard drive and use the TM

the story is long but start from downloadingthe mountain lion. i try to install but the system told me i need to run hard drive repair utility becouse the hard drive is damaged. i did that but the software told me is too much and i need to format the hard. after that . i try to remove some un use software and even try to re install the lion first and then update it to mountain lion but it didn't work.
i have back up on time machine. i have outlook 2011 mac plus paralele with autocad and quickbook acounting software on windows.
i need to know if i format the machine and use the TM to restore the machine . do i need to install all software again . do i lose any data or just machine will look the same as now.
i am new in mac i have it just for year.
please help.
thanks

Yes, you can use an external drive. To upgrade, however, means:
Purchase Snow Leopard DVD then update Snow Leopard to 10.6.8.
Access the App Store with your Apple ID and purchase and download Lion.
Your computer must meet system requirements:
Snow Leopard General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Lion System Requirements
Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7, or Xeon processor
2GB of memory
OS X v10.6.6 or later (v10.6.8 recommended)
7GB of available space
Some features require an Apple ID; terms apply.
Obviously, you do not have to upgrade to Lion but can stop at Snow Leopard 10.6.8 which is sufficient for the current versions of iLife apps. Note that iDVD is no longer part of the newest version of iLife. Lion 10.7.2 or later is needed should you wish to use iCloud.

Capture in any format using VitualDub and TV@anywhere

Similar Messages

Maybe you are looking for