Capture incoming phone # to contacts? Voice commands? Speed dial?

How do I capture an incoming phone call to my contacts? Is there any way to dial by voice commands? On my old phone I could press and hold a number to speed dial, is Favorites the only way to do this on the iPhone? Any help would be appreciated

once you have a call in your call log (recents) press the blue arrow to the right of the number and you will see two buttons 1. create new contact 2. add to existing contact
no voice dialing
favorites is the only way to speedial, i think its faster than the traditional method just double click the home button and you are taken directly to favorites then just one touch and 'viola' phone call
good luck

Similar Messages

  • Phone is malfunctioning, voice command comes on and calls random numbers or plays Ipod

    Phone is malfunctioning, voice command comes on and calls random numbers or plays Ipod

    Have you tried the standard fixes:
    - Reset
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Restoring from backup
    - Restoring to factory defaults/new iPod
    Are you using the headphone/mic?  If so sometimes sweat/moisture in the controls can make the iPod do strange things.
    What number are you looking for?
    If les than a year old, the Apple warranty still covers it.

  • Phone continue on voice command screen access for 1min

    phone continue on voice command screen access for 1min

    No.  The state that your phone is in recovery mode, there is no data on the phone.
    You must use iTunes to restore your phone and then use the last backup that you have

  • SRP547W Voice User# Speed Dial Settings - Access?

    How is the Voice>User>Speed Dial Settings number accessed from a phone keyboard?
    Is the field in the settings page a dial plan string? 
    Unlike the Selective Call Forward Settings entires, this field seems to only accept a phone number or URL.
    As such, I'm not sure how to access it from the phone keyboard.

    Hi Gary,
    Once configured, you should just have to press n then # - where n is the speed dial index (2 - 9).
    Regards,
    Andy

  • I just upgraded from a 3Gs to the new 4s and I noticed that my Bluetooth in my car no longer works well with Siri. Everytime I use a voice command to dial a number it starts the search, finds the number and then says call ended!

    Is anyone else having this problem?  I never had a problem with the 3Gs!!

    Almost there...
    I'm replying to myself, as I have found the answer.
    1.  Started iTunes, connected iPhone 4S, turned on Airplane mode.
    2.  In iTunes, hovered mouse over my iPhone 4S name in left column, in popup box clicked on "Restore from Backup..."
    3.  From menu clicked on name of my old iPhone 3GS backup.
    4.  Backup appeared to be finished in about 8 minutes, but I new that could not be correct...iPhone had rebooted, so I entered password.  I could see that most apps were "waiting" and grayed out, also in iTunes top status box indicated that apps were being sync'd.  Also noted that my iPhone 4S now had the same name as my "old" iPhone 3GS. 
    5.  After some time (a couple of hours, perhaps, not sure because I went to sleep), everything appeared sync'd on new iPhone, and iTunes stated that sync was OK.
    6.  Manually renamed my new iPhone 4S to its correct name, then backed up to computer.
    I decided to hold off on iCloud for now - two majore issues:  1) have heard some reports of data dissappearing, and 2) I will have to talk to Apple about MobileMe instructions for moving to iCloud, which state that move will not transfer my mobileme email, and also that I cannot install iCloud management software (nor sync to Outlook) on my Windows XP computer - I intend to upgrade to a new Win7 in January 2010, and I have heard it is not so simple to change iTunes/device syncing to another computer.  Sounds like a good project for the Christmas-NewYear holidays...

  • Voice Commands Like Unlocking Phone or Driving Mode

    Hey everyone,
    Is there a way to unlock the phone with a voice command? Or, perhaps is there a driving mode to use voice commands while driving?

    Don't know about that,maybe with a smartwear accessory using some kind of application (from SW3 I believe) but I am not sure. 
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Replace Nuance Voice Commands with Google Voice Search

    I would like to replace the Nuance Voice Commands with Google Voice Search when i press the call button on my bluetooth stereo headset.
    I do not see a way to uninstall the Nuance Voice Commands...
    I do not see a way to configure the phoe so that it uses Google Voice Search instead of Nuance Voice Commands...
    Factory reset defaults the phone to Nuance Voice Commands...
    I would like to press the call button on my stereo headset and have more voice commands than the Nuance app provides. Has anybody found a way to change this behavior without special access?
    Sorry my phone is stock and no special access...

    Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
    I just tested it here and i get the same result as you but i'm swedish as well.
    Not sure if this has to do with how Google Maps behaves in different countries but a Google search is made when you say a voice command that's not recognized by any of the apps you have for the watch. There's a discussion about the "Navigate to" not working here and it seems Google is looking into it.
    What i've also noticed myself is that some apps actually give wrong information about which voice command you should use so sometimes you have to try another phrase than the exact one the app is telling you to use.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Ios 5 possible firmware bug for iPhone 4; Voice command/text-to-speech doesn't work properly.

    I upgraded an AT&T and Verizon iPhone 4 to the ios 5 firmware, and I am having the same exact issues for both phones.  When using the voice command a few times, the audio voice does not come through the "speaker" (referring to the speaker located at the bottom of the phone).  Instead, the audio voice goes through the receiver which is on the front face of the phone, on the right of the camera.
    For example, say you want to use the voice command to dial a phone number.  You would enable voice command by depressing and holding down the "Home" button and give the command "dial...1-800-452-3456", the phone would then repeat the phone number back to you through the "speaker".  However, when I did this a few times, the voice instantly goes to the receiver instead.  I found no way to fix this problem.  I tried the following and none of these solutions worked:
    Turned the phone off and back on again
    Hard reset (held down the Home and Lock button for 10 seconds)
    Restored the phone, and set the phone up as a "new iPhone" instead of restoring from back up
    After trying to restore both iPhones and still have the same issue, I made an appointment to visit Apple.  I took the Verizon iPhone 4 to Apple, and the employees handed over a refurbished iphone in hopes to solve this issue.  However, this refurbished phone still had the same exact issue. 

    Of course I checked my apps library and found nothing. However I'm looking at the status while sync is processing, I'm 100% sure that app is not synced to my iTunes library
    Yep, I can always manually "transfer purchases" to my iTunes library. But this is not the point. On my old iPhone 4 and new iPad (3rd gen), it will sync all newly installed apps from my iOS devices to my iTunes library, no need to click "Transfer Purchases" again.

  • How To Use The Voice Command in Nokia 6300

    Dear all
    the voice command which saved on the Nokia 6300 is a computrized only i can't change it with my voice which return this option is useless to me so is there any other way to use this service using my real voice

    No, on newer Nokia phone you can no longer recorded your own voice tags.
    If you are having difficulty with the phone understanding your voice command please try to change the voice playback setting on the phone. Do the following :
    Menu -> Settings -> Phone -> Language settings -> Voice playback language
    Then select a language that the phone should use for playing back voice commands, you might want to select a language that closely resembles your accent and language.
    Knowledge should be your Advisor when you need help.
    1610»2110»8110»5110»3310»6210»7250i»6220»6230»6230i»6233
    Love me or hate me, its still an obsession. Love me or hate me, that is the question. If you love me then Thank you! If you hate me then ...

  • Voice Commands crash E90

    Hi all
    Just started having a problem with the E90 restarting whenever I attempt to use the voice commands. Nothing has changed on the phone. Using v7.40.1.2 firmware. Has anyone else had the same problem?

    No problems Terri
    Pushing the voice command button will start the voice recorder. Push and hold it in for 2 seconds and the phone will start voice command mode. If you haven't used it before the phone will take a while to recognise your voice. Speak as naturally into the phone as you can.
    I've also got my voice commands working. NSU wouldn't let me reload my current firmware even with using XP but I cleared the voice adapts using the "Remove Voice Adapts" option in the Voice Command settings and it's working again.
    Message Edited by slayguitarist on 29-May-2008 04:37 PM

  • N95 Navigation works but no Voice commands

    Hi there,
    I dowloaded maps, bought subscription. GPS work well, finds its position in 1-2 minutes and navigation works. But I do not have any voice commands at ALL!!!!!
    Can anyone suggest something? How to get voice commands during the navigation?
    Many Thanks, Kate

    Hi,
    I can not remember step by step. But this is I think how I did it:
    Coz I subscribed, I switched off "Network Connection" GPRS. And possibly other connections were OFF as well.
    And when I was trying to choose "English" or any other languages it would not work coz it did not have voice files.
    I then allowed all connections to work (including GPRS). Then I opened MAP applications and started navigation. And magic happened. The phone started downloading voice commands. And it works since.
    What I think happend is that voice commands can be downloaded sort of atomaticaly, but only if you have GPRS "ON". After voices were dowloaded I switched OFF Network connection.
    Try it, Good Luck!!!! ;-))
    Kate

  • Speed Dials on phones

    This is a silly question but when I set up speed dials on a 7970 in phone configuration in callmanager the speed dials don't show up on the phones, am I missing something? Thanks in advance

    Hi Efrain,
    Only if the Phone Button Template for the 7970 is set up as 1-Line and 7-Speed Dials. I'm not on site right now so I can't check but I don't think the default Button Template is set up as such. If not you will need to create a new Phone Button Template with the 1-Line 7-Speed Dial combination.
    Rob

  • Quick way to assign speed dials on 7925G phones?

    Hi
    We have 22 7925G phones and we need to assign the Zero through Nine keys on the keypad to be speed dials.
    The phone will only allow me to add a speed dial for these keys which is part of the phones personal address book which is annoying considering we have a corporate address book.
    Its not a good use of anybodies time to program in each entry into the Personal Address book on 22 phones and then setup the speed dials.
    Surely there is a quicker way of doing this?
    Thanks

    Hi
    Once the phone is on the network, browse to it's IP address.
    Click Configurations/Phone Book. Default username and password are admin/Cisco 
    Configure the phone book.
    Then on the left you can use the export/import functin to export it from this phone and load it into the other phones.
    Aaron

  • ISync 'Reset Device' resetting speed dial?

    Hello, I am using an aftermarket plug-in to iSync with my SE w580i, as it is not officially supported by iSync, HOWEVER, I had this issue with my SE z520 which WAS supported officially by iSync, so I suspect that the plug-in is not at fault...
    I have several numbers set up to speed dial, so I can press '1' (or any other numbers) and call, instead of having to enter the full phone number. I noticed with my old phone, and now with my new phone, that if I 'Reset Devices' (thinking that only my calendars and contacts will be reset), my speed dial gets reset and I have to reprogram it. In a way, I understand, as after the reset, the phone sees all new contacts, BUT if they have the same name, why is it a problem?

    The "Reset Device..." command in iSync does exactly that - so any settings you've applied in the phone to specific Contacts (such as speed dials, custom ringtones, caller ID pictures) will also get wiped.
    If you think about it, you assign a speed dial to a contact. Resetting the device wipes that contact, so the speed dial setting has no contact to be assigned to.
    iSync is unable to retain (or even see/access) any of the custom settings you apply to contacts in the phone, so every time to reset the device you'll have to re-apply any custom settings.
    This could also apply to changes to data within a contact, because Sony Ericsson phones don't allow a Contact to be modified over Bluetooth, so iSync has to delete the contact and re-send the edited one, thereby removing any custom settings applied to that contact in the phone.

  • Where is the speed dial list?

    I want to change the speed dials on my Pearl 8120 but I'm having trouble finding the list. Here is what the manual says: 
    "Change the contact assigned to a speed dial key
    1. In the phone, press the Menu key.
    2. Click View Speed Dial List.
    3. Click a contact or phone number.
    4. Perform one of the following actions:
    • To change the contact that is assigned to a speed dial key, click Edit. Click a new contact.
    • To assign the contact to a different speed dial key, click Move. Roll the trackball to move the contact to the new speed dial key.
    Click the trackball.
    • To delete the contact from the speed dial list, click Delete."
    The problem is, when I press "Menu", there's nothing even remotely like "View Speed Dial List." Anybody know where this is hidden?
    Solved!
    Go to Solution.

    Press the GREEN dial key, then the MENU key which is the key just left of the trackball.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

Maybe you are looking for

  • One album will not import to authorized computer

    I have a Macbook and an iMac.  Both are set up to share, both are authorized in iTunes under the Apple ID I've had for years. I make all purchases on the Macbook. Then I copy them over to my iMac by selecting the Macbook under "Shared," choosing "Sho

  • How to install developer suite on windows vista

    trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem. did any one have this problem using developer suite x86-101202 (compatibility mode xp sp2)

  • Corrupt photos in album, how to save

    Hello, I have put too many photos into iphoto and it has gotten buggy. I already created an album of edited photos, about 500. When I try to export it, it says the files are corrupt. What is the best way to try to save all that hard work. should I fi

  • Dynamically modify Task Flow at runtime

    I have a use case where I need to dynamically modify a task flow at runtime. In my use case, for all task flows I need to add a router that can navigate to any view activity on the flow. The router will need to have control flows from the router to e

  • Software Restore to use Classic in OS X 10.4?

    Hi, I had my computer upgraded from Panther to Tiger a couple of months ago and since doing that get a message saying I need to reinstall Classic before my kids can use any of their old games. Reading throught the posts I think I have figured out wha