Capture iPhone camera and microphone using QuickTIme in a web based app.

Hi all.
Can I capture video from iPhone's camera and audio from the mic. using QuickTime in a web based app. ? Of course on the iPhone 3G and 3GS. I need this because I want to let users to use the iPhone for a web based video chat. So theoretically my point is to use QuickTime to capture an a/v signal from a Mac camera/mic. or iPhone camera/mic., to encode that a/v signal (QuickTime knows to encode to H.264/AAC right?) and to send the encoded stream to a server. Is this scenario a realistic one? Can it be implemented ? (I don't have any experience in programming with iPhone and Mac...)
Btw. do you know any emulators for iPhone that runs on Windows 7?
Thanks,
Tudor

Hi
See this Thread
Last login date & Time
Kind Regards
Mukesh

Similar Messages

  • Following iPhone 2G update to OS 3.0.1, cannot use web or web based apps

    I recently updated my iPhone and iTunes. iPhone is now running OS 3.0.1. I use o2 as my service provider.
    I have had a few problems, all of which have been solved by these discussion forums, so I am hoping this final, highly annoying thing can be sorted.
    I cannot access the web. If I enter Safari, a message pops up saying
    "Could not activate cellular data network - you are not subscribed to a cellular data service"
    Now, for a start, I'm not entirely sure what they mean - is it a problem with the phone or with O2?
    I have a little circle next to the carrier name, which I believe (having gone through a troubleshoot on the Apple website) means I have a service of some kind, or my phone recognises a service?
    (I'm not technically minded, can you tell!)
    Obviously I have no web connection, so I cannot use any of my web based apps either, which is highly irritating.
    I'd be really grateful if anyone can help. Thanks in advance.
    Message was edited by: Lou1985

    Hi there. I too had this problem after upgrading an iPhone 2G from OS 2.1 to 3.0.1. I solved it by doing the following:
    Select Settings > General > Network > Cellular data network and then change the Cellular data APN to: mobile.o2.co.uk (assuming you are an O2 customer). I think that resetting the network settings under Settings > General > Reset > Reset Network Settings also works.
    Hope this helps.
    Tim

  • Can we capture the video and audio using cam and microphone in Edge Animate?

    Hi Everyone,
    I got a new requirement from the client to create a HTML5 based functionality through which one can capture the video and audio using his web-cam/camcorder and microphone. I have researched on internet and found that there is api available (not reliable) http://www.html5rocks.com/en/tutorials/getusermedia/intro/ . I am not a coder by profession and use Edge animate to create HTML 5 based animations and stuff like that. Another problem which i have found that the api only works well with Chrome and Opera and not with Mozilla, IE..
    Can anybody help me out in this, please...
    Thanks & Warm Regards
    Vikas

    Hi, Vikas-
    After a brief bit of research, you're definitely hitting upon the limitation of the browsers.  Not all of the browsers have implemented this part of the HTML5 standard, so you're going to either have to use Flash or be limited to these specific browsers.
    Thanks,
    -Elaine

  • I have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    i have iphone 4 and i used it for a one and half years.i used it in sri lanka and doha qatar also..,recently i update it i.o.s 7, then it was working.after i.o.s 7.0.3 came i again updeted it and now my phone network is not working.now phone is locked.pls help.

    I am seeing if I can get another battery even though I do not believe that is the issue.  It keeps giving me vdd_under which I believe is under voltage, maybe it is just a faulty battery?  It charges up like normal and functions normal (when plugged in, or above 90%) but it gives under voltage warnings and shuts down when in heavy use (using camera or going back and forth to imessage).  When just sitting idle it doesn't seem to turn off until that 55-60% mark.  It may just be a faulty battery because I feel I installed all of the other cables correctly when replacing the screen, and I don't think those connections should affect the battery anyway except for maybe the logic board cable (the 2nd cable to be unplugged after the battery cable) I guess I could clean that out as well with isopropyl just in case.
    Any other suggestions would be helpful... and I will get back to you if a new battery helps.  Thanks!

  • Flash Player security Pop up when using camera and microphone.

    Hello Friends
    Can any body suggest me how to remove flash player security pop up for camera and microphone through coding.
    Thanks in advance.

    The security pop-up was first introduced with FP7. If you want to bypass it I can name two ways off the top of my head:
    1. Regardless of ActionScript version (2.0/3.0) in the Flash authoring enviroment, in the Publish Settings dialogue box, the Flash tab, near the bottom choose Access Network Only from Local Playback Security.
    2. Publish your movie as a projector. Both of these techniques will allow to "play" your swf file locally.

  • IdeaPad Y650: Cannot use Camera and Microphone on Windows 7

    Hi,
    When I bought this laptop, these two works fine in windows vista. But after I reinstall the machine with windows 7, the internal camera and microphone are no longer recognized by the system. I tried to install the drivers from lenovo website, but there is only windows vista / xp driver. I tried windows vista driver for camera and microphone but still not work.
    How should I make my camera+microphone work on windows 7?
    thanks

    My camera and mic work fine.  When I installed Win7 I did not do a clean install.  I just upgraded from the Vista 64 installation that came preinstalled.  I've been pleasantly suprised to find that everything works beautifully.  Actually better than it did in Vista.  Maybe try restoring your Vista installation (if possible, I haven't tried the onekey restore feature) and then install Win7 as an upgrade.
    This is just a suggestion - I have not tested this!

  • No Audio on built in camera and microphone

    please help iMove has no audio every time i try to use the built in camera and microphone to record straight in.... there is NO AUDIO !!

    SophiaSlater wrote: ... iMove ... record .... there is NO AUDIO !!
    (0) Unless you are trying to use an old external (Firewire) iSight, there is no need to post in the iSight forum.  Unlike external iSights, MacBook Pro built-in cameras don't have integrated mics.  MBP's mic is a separate device from its inbuilt camera.
    (1) Use iTunes, Safari, or QuickTime, etc. to verify audio OUTPUT is working on playback outside iMovie.  If not, check your speaker volume and mute settings.  If you use external speakers or headphones, check their connection, settings, and power switches.
    (2) Record a short audio test using a non-iMovie app like Photo Booth or QuickTime X to see if it works.  If iMovie is your only trouble, and if the following suggestions do not resolve your issue, you may need to reset iMovie preferences or even reinstall the iMovie app.
    (3) If your audio trouble is ONLY in iMovie check iMovie's VoiceOver audio settings.
         • Verify you are using the correct "Record From:" audio input source.
           (Yours choices may differ from those shown in the image above.)
          • Also verify that your "Input Volume:" is set loud enough.
    (4) If your trouble continues, also check your MBP's
          > System Preferences... > Sound > Input settings:
         • Verify you have selected the correct "sound input" device.
           (Yours choices may differ from those shown in the image above.)
         • Also verify that "Input volume:" is set loud enough so the
           "Input level" meter flickers when you speak.
    Message was edited by: EZ Jim
    Mac OSX 10.8.3

  • HT1692 I just upgraded my pc to Windows 8.  How can I sync my iPhone 5 and iPad using a USB cable with iTunes for Windows 8 ?

    How do I sync my iPhone 5 and iPad using iTunes with my new Windows 8 computer?  Windows support community implies it's an Apple problem.

    chateaudrive wrote:
    roaminggnome,
    Windows Support says you cannot sync Calendar function for  iPhones with Windows 8
    You did not mention this in your 1st post.
    Did you try the troubleshooting steps on the page you came from?

  • How I calculate the flv file size whe I recording from camera and microphone?

    Hi all:
    I'm recording video from my webcam and my microphone.
    I would like to know how I can to determinate via some formula, approximately, the result file size due to camera and microphone configuration.
    I show you my actual configuration:
         // setup cam
        cam = Camera.get();
        // setting dimensions and framerate
        cam.setMode(320, 240, 30);
        // set to minimum of 70% quality
        cam.setQuality(0,70);
        // setup mic
        mic = Microphone.get();
        mic.setRate(22);
    Only ohert question:
    What enconders are using to encoder video and audio by default?
    Regards, Roberto.

    I'd say 9.4 mb is correct. Email attachments always put on a lot of weight, so 12 mb as an attachment is probably right too.
    Why don't you use a free service like Filemail? It's very easy to use, and you dont't have to sign up to use it.

  • Ranking of optional cameras and microphones

    Hi,
    Has anyone seen or done a ranking of optional cameras and
    microphones for Adobe Connect Pro? It would be great to get an
    overview of best and most economic products. Right now I am
    testing:
    - QuickCam Vision Pro for Mac, from Logitech - And I have not
    succeeded yet in getting it to show up in the camera configuration.
    - ClearChat Pro USB - And I think there is a humming noise
    which I have not heard before using other headsets and also my
    Mac's buil-in microphone.
    All hints are more than welcome!
    Kind regards,
    Jonas

    Hi Eric and others,
    I just tried to setup a meeting using my sony camcorder
    instead of the logitech webcam. it seems to me that the camera is
    recognized by laptop and adobe connect. But I don't get the
    pictures. I'm using the firewire cable.
    Questions:
    - what could be wrong
    - do I need additional software
    - can I use USB instead of firewire?
    Kind regards Paul

  • Cameras and microphones in set top boxes

    Is Verizon currently deploying set top boxes with built in microphones and cameras for future use?   If so does anyone know what model set top boxes are so equipped?  If the hardware is not in the current devices when does Verizon plan to roll out the new hardware containing the cameras and microphones?
    http://www.washingtontimes.com/news/2013/jun/17/big-brother-alert-cameras-cable-box-monitor-tv-vie/p...
    http://appft1.uspto.gov/netacgi/nph-Parser?Sect1=PTO2&Sect2=HITOFF&p=1&u=%2Fnetahtml%2FPTO%2Fsearch-...
    http://www.digitaltrends.com/home-theater/new-verizon-patent-will-put-cameras-in-your-cable-box-to-p...

    Current Verizon STBs do not have cameras or microphones.  Even if future ones did, it's doubtful they would work.  Verizon can't get the basic function of their software right anyway, so I'm not concerned.

  • I got the iPhone 4S and I use google calendar and when the Sprint salesperson set up my phone only 2 months of my calendar went on my phone. How do I get my whole calendar to sync on my phone?

    I got the iPhone 4s and i use google calendar and when the Sprint sales person set up my phone, only 2 months showed up on my iPhone. How do I sync all of google calendar to my iPhone!

    Settings/Mail,Contacts,Calendar - there's a setting for how far back to sync calendars.

  • I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks

    I have an iPhone 3gs and it used to show up on my computer, but now it shows up on my screen that it is charging however, does not appear in iTunes or My Computer so i can't sync it. Can anybody help? Thanks.

    Did you already make sure that Apple Mobile Device Service is installed and active on your computer?
    http://support.apple.com/kb/TS1567
    More troubleshooting about your device not recognized in Windows can be found here: http://support.apple.com/kb/TS1495

  • HT1871 Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Hello i have one IPhone 4S and I use 3G net in my mobile sometime I have problem with temperature in my phone at the SIM card or battery how can I fix this problem. By update or version of 6.1.3

    Could it be because the SIM card got damaged while I cut it to fit the IPhone?
    Very likely. Hard to believe the carrier in Mexico doesn't have a micro-SIM card available.
    Or somehow the Chinese carrier found out and locked it?
    No, which is not possible.
    What can I do? Get a new SIM and see if it works again?
    Get a micro-SIM from the carrier in Mexico that you don't have to manually cut down. If that carrier doesn't provide one, switch to another carrier that is not so low-budget.

  • Can you shut off the Internet on a iPhone 4s and still use it with a wifi connection ?

    Can you shut off the Internet on a iPhone 4 and then use the phone as normal

    I assume that you're asking if you can shut off cellular data (as no individual can shut off the Internet! )? Yes, you can turn off cellular data and use the phone features (except for MMS which requires cellular data) and access the Interenet via WiFi.
    Settings>General>Network>Cellular Data>Off

Maybe you are looking for

  • Sudden issues with adobe X on mac OSX 10.7 when printing PDFs

    Everything was fine until an hour ago, when I tried printing a PDF and I got the error "Adobe quit unexpectedly.  Click the reopen the applicaiton again" When I checked Show Details, this was listed Exception type: EXE_BAD_ACCESS (SIGBUS) Exception C

  • Help with return pdf

    I got a pdf that would not convert to word so it took me hours to answer all the questions with sticky notes but when I went to option to email...I emailed but it is not being received...help

  • Creation of sub-types

    Hi Guy's, Please explain me how to create the Sub-types in ABAP-HR. Thanks, Sai.

  • Windows 2008 r2 64 bit with 64 bit CF 8 - ODBC drivers missing excel

    We installed a 64 bit CF8 enterprise server on our 2008 r2 64 bit system and we can't seem to figure out the ODBC problems. Most of the solutions we find online seem to apply to 32 bit versions of CF (on 64 bit 2008) - not x64 on x64 2008. We've alre

  • How can I sync my motorola KRZR K1 in Lion?

    I was using iSync in snow leopard to sync my moto phone contacts and calendar, but as I updated to lion, I was just WONDERING why iSync has been gone!! This was one of the best features of osx I've ever loved to use. but now I can't sync my moto phon