Capture monitor panel issue
Everything worked fine in capture mode from a camera.When i change the 4850 ati with a new GTX 470 n vidia,the monitor panel in capture mode, looks like the black level has increased,or something like that.. Actually there is no basic problem the clip is captured correct.Does anyone knows about it?The same issue happens also in cs4.ASUS P6T, I7,12GRAM, VISTA 64 NVIDIA DRIVERS 260.99.
Thanks a lot for your reply.I did but nothing change.During capture if i click capture settings i can see the real black in monitor.Why the source and the program monitors are correct and this happens only in capture mode?
Similar Messages
-
Why would my video clips be running too fast when played on the monitor panel?
I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help. -
.mts file video won't play in Elements 10 Monitor Panel
Hi All
I am having trouble with .mts files. I have Premier Elements 10 on Win7 pc, and I have just, for the first time, opened .mts video files which were taken on my Lumix FZ150. When I drag the scenes onto the timeline then try to preview them I can hear the audio but the video in the Monitor Panel doesn't move, it doesn't play.
Is there something I am doing wrong?jgjgjfjf
What computer operating system is your Premiere Elements 10 running on? And, does your computer use a NVIDIA GeForce video card/graphics card?
IMPORTANT. Please read the Announcement at the top of this forum regarding the Premiere Elements 10 NVIDIA GeForce issue. That Announcement describes the problem and gives detailed information on how to deal with the situation.
Do you have problems getting a video display in the Edit area monitor for still and videos from other sources?
Also of importance in directing the troubleshooting are the properties of the Panasonic Lumix FZ150 video file that you are importing and the project preset that you are selecting to match the properties of that video. From what I have read of your camera, you could have MPEG-4, AVCHD, or MotionJPEG video compression. But, with that .mts file extension, that would suggest that your camera is set to record AVCHD. Is that correct? Are you sure of the file extension and video compression for the file?
The answers to all of the above will point us to the solution to your issue.
We will be watching for your results.
Thank you.
ATR -
Monitor playback issues in PE9
Hi,
I am posting on behalf of a colleague and I wonder if anyone has encountered the following issue or has any advice about resolving it.
When he starts a new project in PE9 and captures via firewire the capture monitor plays back fine but when switching back to the timeline/preview monitor there is no video playback, it just stays on the first frame of the clip in the timeline.
Similarly if he opens an existing project the timeline/preview monitor video playback is fine but if the capture window is then opened there is no video playback in that.
The only way around it is to reboot the PC and then start again with the required monitor.
In both instances the audio plays back fine.
The playback seems fine when scrubbing along the timeline.
This is a recent development, both capture and preview monitors used to function without a problem.
It's not an Windows or Adobe update issue as the PC is not connected to the internet.
It's a Dell PC, Win7 64bit, Intel i7 CPU, 16GB RAM, nVidia graphics card, 2TB hard drive.
Any help or advice would be most appreciated."It's not an Windows or Adobe update issue as the PC is not connected to the internet."
Actually, that could be part of the issue. You NEED to be connected to the internet and get all of the necessary updates. Even Windows 7 is on SP1 -- and your graphics card driver is probably a year out of date, even if the computer is brand new.
Other possible issues:
You don't say, but is this a miniDV camcorder connected by FireWire?
Are you capturing to your C drive or to a second hard drive?
You've got a pretty fast processor and it should fly with miniDV video. But without any operating system or Adobe or nVidia updates -- or the requisite latest version of Quicktime -- there's no telling what's going on with your configuration! -
Capture Monitor vs. Project Monitor
When capturing video directly from the Sony Handycam, it appears to be of normal brightness and contrast. But later when viewing the same clip in the project monitor it appears extremely dark. Exporting video to produce a DVD restores the original brightness of the capture monitor.
This has been a real issue because we use the project window for editing. Compensating for the extremely dark image on the project monitor causes the finished exported video to look very washed-out. If anyone has experienced this problem and found a way to deal with it, I would be grateful for your advice. Is there a way to adjust the settings of the project monitor to appear the same as the capture monitor?You might go back a level or two (so you cover the entire forum) and do a SEARCH for something like
calibrate monitor
Or, buy a video card with a monitor and a TV connection, and connect a TV to the 2nd output
A computer monitor and a TV are simply different -
I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.
gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR -
No preview on capture monitor...
Hi there,
A wierd problem occured to my PC just recently.
I am unable to playback footage in my capture window...
I have no idea what has happened, but basically it doesn't work anymore!
Spec: SONY HVR-V1E camera, recording HDV.
Adobe Production suite CS3, all fully updated.
Windows XP SP2, 3.2 Ghz dual core, 3 GB RAM.
I know i cannot preview HDV while capturing, thats not the problem. I should be able to view the footage in my capture monitor before capturing.
I do get the normal capturing screen when i hit capture button though.
I have looked into all the capture settings and all seems okay, has anyone got a suggestion?
thanks...
Andrew-Hi
Its not the capturing its when veiwing the footage and marking in and out points where it has dissappeared. I know you get a dialogue screen when you are capturing. It worked when I first used it with the HDV camera.
Cheers
Jon -
No Preview in the Monitor panel
Hello all,
when I start playing the images, there is no preview available in the Monitor panel (white screen). Only stopped sequenzes were shown and the sound is playing. This problem occurs independently from the used files. When starting Pre there is a failure shown:Problems with the Intel Graphics.But the driver is updated to the latest version. Furthermore it is not possible to change the setting from the Graphic Card as described in the Pre Help.
Select Edit > Preferences > General.
Deselect Enable GPU Playback and in the Playback Preferences dialog, click OK to confirm.
This menu is not available!
Thanks in advance for your help and best regards,What model of camcorder is your video coming from and what format it is?
When you started your project, which project settings did you select? If you selected the right project settings for your video, you will NOT see red lines above your clips when you add them to your timeline. Is this the case in your project?
Have you ensured you have the latest version of Quicktime, per the program's requirements? Have you gone to the nVidia or ATI site and ensured you have the latest drivers for your graphics card? -
First timer here, so bear with me. I have imported my files, but the monitor panel right side is zoomed in. I have a feeling I just missed a setting somewhere. Can anyone tell me what I did wrong and how do I fix it?
Looks like I may have just selected the wrong video type when I first created the project. Is there any way to change that,
or do I have to start the project over again? -
SEO Metadata options not display in admin panel issue.
SEO Metadata options not display in admin panel issue.
Hi there,
Not much information or detail there.
If the New meta option on pages is what you are refering to then the site in question is likely not been upgraded to that beta feature. Only partners who have access to beta options under settings can access that to upgrade. -
Audigy 2 ZS Platinum - Front panel issues
Hello there,
I originally had the Creative Audigy 2 ZS Platinum and all was fine. It all worked and the world was happy. I then (won't go into details) managed to damage the card and whilst I still got sound, the front panel and the joystick port would not work. As it was only the card that was broken, I purchased a new Audigy 2 ZS card assuming I would be able to just stick the front panel connector back on and all would be hunky-dory.
As you probably guessed, I am here, so all is not well. Whilst the game port now works, the front panel still does not respond to anything and I am at a loss. Is there some kind of jumper I need to switch or something? What have I done wrong.
All input is more that welcome, thanks...i am having front panel issues. i think the damage to the card is a potential problem, but i don't think it's the cause for the panel not working. i think something is just seriously wrong with creative hardware. i really don't think pre-sales testing was performed extensi'vely enough. i have had more problems with my audigy 2 platinum in the 2.5 yrs i've had it than a new born baby. to make a long story short, i did a complete upgrade of my system, the only thing i kept was my case and audigy 2 and front dri've bay. i did nothing different than i had before, re-installed windows and everything. everything EXCEPT the front dri've bay works. i do get the red light from the optical out though, so there is power. i don't know what's wrong with this thing. all i can say is: creative you need to get your s**t together, you have as many issues with your sound blaster cards as microsoft has with windows. tech support: you need to do something for once and answer posts that people ask. i posted my question about this problem 7 months ago when it happened, guess how many repsonses i have. ZERO, NONE, NADA, NOT ONE RESPONSE. i don't blame forum users, not everyone knows, i blame tech support b/c you don't respond. i have no clue why, but do something, please.
-
Capture monitor window pixelated
When capturing SD footage via Firewire the capture monitor window has pixelated dropouts in a couple areas (usually the same places) during loading. This is a new dual quad core Dell precision machine nVidia,Quadro FX 5600, 1.5GB dual VGA or DVI, Graphics CardDell Precision T7400. Why would that drop out? Never did for years on my previous Dell dual processor machine which had a much lower power graphics card? Not a real problem, just looks terrible.
Thanks, rgJust gave that a try with no success. Tried putting the capture window in either monitor and that did not change the effect. It's odd since the graphics card provides great performance in HDV playback, and multilayer previewing without rendering. Such a small thing, but annoying.
Anyone have any other thoughts? rg -
Alsa , via82xx and IEC958 Capture Monitor problem
first of all hello all as this is my first post on this great archlinux community and im here to stay i hope , well my first comment is to all the people needing help on installing the alsa and using the via82xx module , well it tooked me like 2 hours to find out why i was not beeing able to hear the music even when xmms was playing it and finally find out (on the mepislovers forum) a problem when u install the alsa by default it puts on the iec958 capture monitor and u need to put it off so your sound starts working , i was just about to give up on installing the sound as i did step by step configuration on the wiki and on the alsa guide without getting it to work , finally dont know how i ended up in the mepis forum and looked all the people that with just turning off the capture monitor were able to get the sound working.
well thats all and see u all aroundI have the same problem!!
The IEC958 monitor always ON and I can hear anything.... I put it off through alsamixer and quit, execute alsamixer again and IEC958 is turned on again....
But somethimes when I raise the master volume on 100% the sound comes back...
I hope that other friends can help us.... -
I'm stuck in the monitor panel.
I want to add to my movie, but cant get out of the monitor panel. How do I get back to the time line so I can add more to the movie?
Hi, in answer to your questions
. We have elements 7 and are using a HP laptop. I shut down the computer and then realised that I had not shut down Elements first. I canceled shutdown and went back and shut the programme. When I later returned to elements , I found that I could not get out of the monitor panel.
Date: Fri, 1 Nov 2013 14:38:17 -0700
From: [email protected]
To: [email protected]
Subject: I'm stuck in the monitor panel.
Re: I'm stuck in the monitor panel. created by A.T. Romano in Premiere Elements - View the full discussion
valleysend
What version of Premiere Elements are you using and on what computer operating system is it running?
Are you working with one monitor system? Have you been moving workspace panels around?
What workspace are you in
Premiere Elements 12....Quick, Expert, Quided Quick, Quided Expert
Premiere Elements 11...Quick or Expert
Premiere Elements earlier than 11, Timeline or Sceneline
What were you doing last before you realized you could not import additional source media?
Let us start here and then decide what next.
Thanks.
ATr
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/5807974#5807974
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/5807974#5807974
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/5807974#5807974. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Premiere Elements at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746. -
BootCamp Windows7 and second Monitor display issues
I'm running BootCamp Windows7 on a 2010 15in MacBookPro. While my OSX side recognizes & displays to my ASUS VS238H-P monitor, the Windows7 won't output an image. The monitor is connected by a HDMI Cable.I have used http://forums.civfanatics.com/showthread.php?p=8596214 to get the right driver and thus monitor recognition form the control panel. At this point the system says it recognizes the monitor, give me all the normal display option for outputing an image, but the monitor says it is recieving no signal. Can anyone help me with this? I've seen alot of simmilar issues as I've looked for answers but nothing that directly addresses this.
I'm running BootCamp Windows7 on a 2010 15in MacBookPro. While my OSX side recognizes & displays to my ASUS VS238H-P monitor, the Windows7 won't output an image. The monitor is connected by a HDMI Cable.I have used http://forums.civfanatics.com/showthread.php?p=8596214 to get the right driver and thus monitor recognition form the control panel. At this point the system says it recognizes the monitor, give me all the normal display option for outputing an image, but the monitor says it is recieving no signal. Can anyone help me with this? I've seen alot of simmilar issues as I've looked for answers but nothing that directly addresses this.
Maybe you are looking for
-
What can I do? I Photo, I Movie, and Photo Booth Icons are visible but when clicked on won't open.
-
Unable to connect Oracle Application Database using Discoverer Admin 10g
Hi, I have installed oracle Admin 10g on my machine and trying to connect oracle application database but every time i am getting error like "Unable to connect to: user@hostname Failed to connect to database Unable to connect to Oracle Application Da
-
Podcasts Scrambled When Played Back on Mini
Hi folks, Downloaded some radio podcasts using iPodder to iTunes podcast. When I update my mini iPod the podcasts are unrecognisable, they sound tinny/scratchy and distorted. When playing the same radio podcasts on my mac and iTunes, they sound fine.
-
Powershell script to find number of major and minor version for a item
Is there a way to figure out to get the total major and minor version count for an item in powershell. I can get the count on basis of following "Item Versions" = $item.Versions.Count but not sure how to get number of major and number of minor versio
-
I was recording an ichat into GB3, which was very cool. GB would put the buddy icon of whoever was talking into the chapter list. The problem came once we were finished. I need to split out tracks to add some time to insert some music. This works fin