Capture not working (since upgrade to leopard)

hi
i have upgraded my OS to leopard and since doing that if i try to open FCE with my camera attached (to the back of the mac via firewire) the rainbow wheel comes up and FCE just wont open until i turn the camera off. i also get the same problem if i try to capture anything, but without the camera on everything else works fine i can edit existing clips etc.
this was never a problem before i upgraded to leopard, are there some setting i need to change in order to get round this?
the reason i upgraded was to be able to use the magic mouse fully.
equipment i am using is as follows:
camera: Canon XM2
computer: power mac G5
OS: 10.5.8
FCE: 3.5.1

okay, i have done as you suggested and uninstalled FCE and then re-installed from the upgrade which appeared to work first time i went to use capture, but then went back to use it again the next day and i had the same problem again!!
but after a few times of plugging and unplugging the firewire it finally regognised that the camera was there, one of the odd things i noticed was that when i plugged it in to the back of my g-raid hard drive it did recognise that the camera was there and i could control it from capture but it didn't show any images from the camera?
any ideas from anyone as to why it seems to be working intermittently?

Similar Messages

Airport w/wireless not working since upgrading to Leopard

I run a laptop via a NETGEAR wireless system from my main machine.
I had no problem until I upgraded to Leopard. Now the laptop doesn't see the wireless via airport. help!!

To Clifford Hritz
Re: Networking
Sadly, this is still a problem for at least some MacBook Pro's and OSX on version 10.5.2 and above.
Our MBP is still on 10.5.1 (with WPA), but gets 'connection failed' on any System Software version above that, with *no other* parameters changed on our side. Curiously, my iMac doesn't connect wirelessly either, on any version above OSX 10.5.1, so I use ethernet instead. The MBP remains (yet works perfectly) on 10.5.1, meaning that any subsequent security updates, plus other enhancements, are unavailable to the regular user of that machine (and she is not too happy about it!).
I have read many of Mr Kucharski's posts and he is undoubtedly very knowledgeable regarding Mac OSX etc., but seems unable to resolve this issue. He does try hard to be helpful (that is clear). However, other users have insisted that there is a problem with OSX past 10.5.1 or .2 and wireless networking with at least some MBPs (and perhaps MacBooks), after having removed all other factors.
Sorry that this doesn't help. I can only console with the thought that there are others out here with the same problem, still waiting for Apple to acknowledge, let alone correct it. Perhaps 10.6 will be the answer.
End of rant.

Wireles Airport not working since upgrading to Leopard

I run a laptop via a NETGEAR wireless system from my main machine.
I had no problem until I upgraded to Leopard. Now the laptop doesn't see the wireless via airport. help!!

Go to this URL and click the download button: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx1056comboupdate .html

Mail program not working since upgrading to Leopard 10.5.6

We have loaded the new Leopard system now twice, and both times the Mail program fails to launch from the taskbar, but stays open in the background. The program will not close, and fails to open to even try to check email. It seems other programs are working just fine, but nothing right with Mail. Anyone know if there is a fix to this?
Thanks,
lldowney

Hello, and welcome to the Discussions.
While the other poster's cited article references certain issues with 10.5.6, they are when updating a system that was already on Leopard. If, as it appears, you were Upgrading an earlier version of OSX, such as 10.4.11, then the relevant article is:
http://support.apple.com/kb/TS2537
Where an even earlier OSX than Tiger once generated the Mail folder, two other MessageSorting files will need to be removed, also.
Ernie

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

Canon S750 printer not working after upgrading to Leopard

Leopard is brilliant, and everything works after I upgraded from Tiger except... my Canon S750 printer gives error messages and fails to print. This is VERY annoying. I can't seem to find an S750 driver for OS X 10.5 on Canon's web site. So, what to do next? Just wait, and keep logging on to Canon's web site in the hope that, one day, the driver will be there? I can't find any official statement from Canon as to what they're up to. Are they currently working on drivers for Leopard? Do they have any projected "release dates"? Are they at all interested, or would they prefer to sell me another printer perhaps? Any information on what I should do now will be gratefully received. Thanks.

UPDATE... my S750 printer has suddenly started to print OK! This is rather bizarre, since I've not re-booted, haven't un-installed/re-installed the printer. End of topic!

System sounds do not work since upgrade to ML 10.8/10.8.1

Hello. Since I upgraded to Mountain Lion, I have the persistent problem of my system sounds not working, after my laptop sleeps. Fresh after a restart, they will work..then, after screen saver or sleep, they will not.
Here's what doesn't sound:
- Apple mail sounds (sending, receiving)
- alert sounds
- Sys Pref -> Sound -> any/all sound effect selection
- screen capture click
Here's what always works fine:
- the pop-pop-pop sound when I increase/decrease the volume
- iTunes
- any sound from audio/visual embedded in browsers
- sound from all 3rd party apps
Internal speakers are selected
No problem throwing out sound to airplay, etc.
No problem with non-system non-Mail sounds
All sounds work fine after a restart...but after a sleep or a screen saver, they will cease working until the next restart.
MacBook Air, 10.8.1 (also was noticed under 10.8)
1.7 GHz, 4 GB
I do see posts where people are experiencing the same, but no real solutions. I have found & trashed the prefs file (from other posting solution) but that did not solve this persistent issue. The sounds always DO work fresh after restart...just after sleeping, they do not. Thank you :-)

Yeah, just to keep everyone breathlessly updated: there has been no fix for me.
Amusingly (mostly not..) on the plane yesterday, when I plugged in my headphones, I was greeted with about 3 weeks' worth of Sent Mail and Alert tones. Good times.
The fix involving Audio MIDI Setup and momentarily changing the internal speakers integer dropdown list used to occasionally work for me...but lately it has not. I'm just making do with no mail sounds, like a chump. How I wish GrowlMail worked with 10.8 because I could get my sounds that way.

Mega pc 651 not working since upgrading to xp

I have recently upgraded my pc to windows xp and since then my tv tuner is not working. Not knowing much about drivers etc, can anyone tell me what drivers I should be using and where to download them from. I also don't have my original msipvs & win dvd cd so cannot load this back on. I have found the download for this but it asks for the serial number from the original cd - WHICH I DO NOT HAVE....can anyone help please?

download the TV@nywhere Master drivers, and read through the sticky topic on the same card, the serial number is found there

Wifi syncing not working since upgrading to iOS 6

Has anyone had an issue with and found a solution to wifi syncing after upgrading to iOS 6? I have not been able to get either my iPhone 4 or 3d gen iPad to sync since upgrading last week. I have the latest version of iTunes. I've tried disabling wifi syncing and the closing/restarting iTunes. I've tried turning my iMac's wifi off and on. The devices show, but will not automatically wifi sync.
Thanks in advance!

I have a variation on that problem. I upgraded my iPhone 4s and my new iPad to iOS6. No problems synching the new iPad to iTunes wirelessly. My iPhone will not sync wirelessly unless I turn it off, then on again. However, if the phone goes out of wireless range, then returns, it will no longer sync wirelessly to iTunes. Otherwise, the wireless connection appears to be working, e.g., I can connect to the internet.

Gmail push not working since upgrading to 4.0

I have not been able to get my email to push since upgrading to 4.0. I have a 3GS and it worked great until the upgrade. Still have it set to push. Tried deleting itunes completely and then restore of iphone. Still no go. Please help.

I have this problem also. It's really persistent and quite annoying. My Mail is silent like a rock on my iPhone 3gs; it's not pushing email notifications at all. To get new emails, I have to open Mail repeatedly, which defies the very definition of "notification" and "push" I really dislike the 4.0 update. I wish I never upgraded to it because everything was perfectly fine prior to the upgrade...

Nike+ ipod not working since upgrading to ios5

I used to link my phone to the Matrix machines which are Nike+ iPod compliant. It used to be fine, I used to run, the runs were never displayed as historic data on the phone but when I synced my phone with iTunes it used to update the website. This worked wheter I used the treadmill/ cycling machine etc.
Since upgrading to iOS5, nothing has synced with the Nike website. After my run a message comes up saying "Workout Completed. You can send your workouts to the Nke+ website in Settings". Am not sure why or how to get this working again.
Any help would be appriciated.

Sorry ignore this. I just went into Settings, went to the Nike+iPod section then at the botom there was an option to send workouts. I had pressed this before but it didn't work. It did today.
Difference today is that I'm trying from home with WiFi. Who knows, just glad its working!

Capture not working (since upgrade to leopard)

Similar Messages

Maybe you are looking for