Capture One RAW Tiffs not previewing properly in Aperture

We just wrapped a big photoshoot and the photographer was using Capture One Pro. He gave me all of the raw files, but Capture creates RAW Tiffs. I imported them all to my Aperture, but now it's only showing me low-res jpeg previews. We switched computers mid-way and some of the previews are bigger than others, so I realize it's probably a setting in Capture One, but I want Aperture to show me the real file.
any suggestions?
thanks,
-A

euroskip wrote:
thanks, but i have to say, that's pretty weak on Apple's end. it was from a Phase One back and if apple wants to get into the pro game, they better get on board with what most pros are using at the moment.
thanks for the response, hopefully they fix that stat.
what's that lightroom? you wanna play? ok.
I agree that they need to add Phase One support, no question. They've got Leaf and Hasselblad. It's a huge oversight for them not to have Phase One.
That said, if this was a "big proshoot" as you say and the photographer gave you all of his raws why are you bouncing around between programs? You are not a digital tech or you'd already know what was up. If you're thinking that you can hit the ground running, fresh from an assignment, with no experience in any of these programs (Aperture, Lightroom, ACR, Capture One, etc.) then you've got a learning curve ahead of you.
It would probably be much more efficient for you to have the photographer process the raws for you (I don't know of any pro's who would hand off their raw files - it's just assuming too much on the client's end) or outsourcing to a digital tech who's knows how to work the files.
Jon Roemer
http://www.jonroemer.com/

Similar Messages

Camera Raw CS6 not working properly

I have upagraded from Ps Cs5 to CS6.
I open a file in CR, and modify the exposition. After that, I modify the clarity: immediatly, the exposition goes back as it was before the modification ...
After the work on CR, I finish the file and go back to bridge: the image is not modified ! But if I dobble click on the same image in bridge, the file is opening in CR with the modifications: so this modifications are note visble on bridge ...
Some body can help me ?
I work with the last version of Br and Ps CS6.
Thanks,
Michel, [email protected]

Thanks a lot, Adriana, it is working ! You are right, it is the Nike plugins responsibility. Everything is OK now.
Salutations and many thanks from Guadeloupe, French West Indies
Michel GOGNY-GOUBERT
Le 4 mars 2014 à 17:42, adriana ohlmeyer <[email protected]> a écrit :
Re: Camera Raw CS6 not working properly
created by adriana ohlmeyer in Adobe Camera Raw - View the full discussion
If you have Nik plugins installed, please check reply # 8 on this thread:
http://forums.adobe.com/message/6045415#6045415
Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6179192#6179192
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6179192#6179192
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6179192#6179192. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Camera Raw at Adobe Community
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

BC editor not previewing properly after saving

I raised this issue a few weeks (could even be more like months) ago with BC, haven't heard anything back.. apparently it was an "issue" they were working on.
When editing a page in BC, all looks fine (text is styled) however when you save/publish, the content is then displayed by the editor as default text. (no styling). This is not so bad for me, because I know what's going on and how it will look, but for clients, they are trying to fix the formatting etc, because it doesn't look right.. When you preview the actual file in browser, it looks fine. It's just the editor that is not previewing properly. If you go out of the page again and edit, it will display properly, but as soon as you save/publish, it defaults again.
BC, any update?

Hey tyj00123,
I believe you may be referring to support ticket #35920 in which my colleague confirmed this was a bug and recorded this issue in our bug tracking software. For your reference, the bug ID was 3569891.
I can see there has been progress made on this bug and it looks like a fix may be rolled out with our next release. However this is not something I can confirm just yet. I also cannot confirm when the next release is due to be rolled out at this time. Please keep an eye on our blog closely for any announcements: http://www.businesscatalyst.com/_blog/BC_Blog/
Cheers.

Teathered Capture Module or Capture One Raw Data Importer

In many commerical professional studios people like to use Capture One Pro in a teathered environment because it works with most cameras, its got an interface that is productive as images stream in (ie- updating white balance, checking focus, checking color number exposure thresholds, overlaying comps) and it's much faster at loading previews than capturing into a hot folder situation like Lightroom has it now. All in all, Capture One is better for live capture teathered environments.
There is a giant problem with capture one, that is that the raw image data created through adjustments in capture one is propietary to capture one and can't be imported into Lightroom for archiving without losing that valuable data. Therefore, i'm either requesting that you either create a Capture Module that is as quick, effiecent and has all the productive tools that capture one has so that we can ditch the glitchy program or create a way to import raw files from capture one to lightroom and maintain the same image appearance.

I agree, C1 pro 5 has made leaps and bounds in the last few years from 3.7. I like it as a capture program but not as a method for organizing and archiving my images. I wish the two could communicate better in a fashion that doesn't require a work around. It's a real workflow issue.

One field is not downloading properly from ALV to EXCEL

Hi,
while downloading ALV out put to EXCEL sheet one field(CSTCTR) is not displaying properly it's truncating left and right side digits,
I have used function REUE_ALV_GRID_DISPLAY
FORM SUMMARY_REPORT .
PERFORM BUILD_FIELDCATLOG.
IF I_FINAL[] IS INITIAL.
    MESSAGE I000 WITH 'NO DATA EXIST'.
    EXIT.
ENDIF.
ST_SETTINGS-EDT_CLL_CB = 'X'.
V_REPID = SY-REPID.
SORT I_FINAL BY WERKS GEBNR PERNR.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = V_REPID
            I_GRID_SETTINGS          = ST_SETTINGS
           I_CALLBACK_USER_COMMAND = 'USER_COMMAND'
           I_CALLBACK_PF_STATUS_SET = 'SET_PF_STATUS'
            IT_SORT                 = IT_SORT[]
            IT_FIELDCAT              = IT_FLDCAT[]
            IT_EVENTS                = IT_EVENTS[]
       TABLES
            T_OUTTAB                 = I_FINAL[]
       EXCEPTIONS
            PROGRAM_ERROR            = 1
            OTHERS                   = 2.
ENDFORM.           " alv_display summary_report
*&      Form build_fieldcatlog
      text
FORM BUILD_FIELDCATLOG.
WA_FLDCAT-FIELDNAME = 'WERKS'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'PA'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '1'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GEBNR'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'LOC'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '2'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PERNR'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SAP #'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '3'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ADPFN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'ADP #'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '4'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PERID'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SSN'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '5'.
WA_FLDCAT-KEY     = 'X'.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'KOSTL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'CSTCTR'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '6'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'NACHN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'LAST NAME'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '7'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VORNA'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'FORST NAME'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '8'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'HIREDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'HAL DATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '9'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VACDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'VAC DATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '10'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GBDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BIRTHDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '11'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'SENDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SRDATE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '12'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'SERADJDAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'SVCADJDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '13'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'TERMDATE'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TERMDT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '14'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'MGTXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TERM REASON'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '15'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'GESCH'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = '***'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '16'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'RACKY'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'RACE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '17'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'VTEXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'VET STAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '18'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EXPAT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'EXPAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '19'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'DISAB'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'DISAB'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '20'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PTEXT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'STAT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '21'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'STELL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOB'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '22'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'STLTX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOB TITLE'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '23'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PLANS'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'POSITION'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '24'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'PLSTX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'POSITION T'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '25'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'AAPCT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'JOBGP'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '26'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EEOCT'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'EEO'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '27'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZBAND'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BAND'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '28'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'EEOEX'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'FLSA'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '29'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
*WHEN DIVG
WA_FLDCAT-FIELDNAME = 'BETRG'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'BW/HR'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '30'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ANSAL'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'ANNSAL'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '31'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'WOSTD'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'HRS'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '32'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZBONPLAN'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'PLAN'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '33'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
WA_FLDCAT-FIELDNAME = 'ZTARGET'.
WA_FLDCAT-OUTPUTLEN   = '10'.
WA_FLDCAT-SELTEXT_M = 'TGT'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
WA_FLDCAT-COL_POS = '34'.
WA_FLDCAT-KEY     = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR   WA_FLDCAT.
ENDFORM.                    " BUILD_FIELD CATLOG

Also make sure if the reference field name and reference table name in the field cat .
There will be some fields where in when dropped to excel will not hold the field properties and may not download properly,In such cases pass the reference fileds to the field cat .
In the field cat u r using, pass this and check .
WA_FLDCAT-FIELDNAME = ' '. "
WA_FLDCAT-OUTPUTLEN = 'XX'.
WA_FLDCAT-SELTEXT_M = 'XXXXXXXXXXXXXXXXXXx'.
WA_FLDCAT-TABNAME = 'I_FINAL'.
wa_fldcat- -
>reference field name,
wa_fldcat----
>reference table name
WA_FLDCAT-COL_POS = '25'.
WA_FLDCAT-KEY = ' '.
APPEND WA_FLDCAT TO IT_FLDCAT.
CLEAR WA_FLDCAT.
Br,
Vijay.

PDF/X1a with a logo containing a colorized grayscale tiff not printing properly

I have a 3 color logo: black, PMS 200U, and PMS 1955U. The logo was built in Illustrator and I have placed grayscale tiff ontop of it. The grayscale tiff is a stipple (dots) effect that I colorized to PMS 1955U in Illustrator, masked it out on top of the logo, and set it to multiply. Within Illustrator, the separations look good and it prints fine when printing directly out of illustrator.
The problem is when I export it to a PDF/x1a and try to print it, it doesn't print properly. Printing from acrobat, it only previews and prints the PMS 1955U stipple and black. The flat PMS 200U under the tiff doesn't print. I've tried bitmapping the photoshop file and making the stipple monochromatic and still doesn't seem to work when exporting to a PDF and printing.
Funny thing is, when I do the whole process for the CMYK logo (not PMS), it all prints out fine as a PDF/x1a.
Any ideas on how to get the logo to export and print properly?
Any help is much appreciated!!

Press quality uses PDF version 1.4 which supports transparency while PDF/X-1a uses PDF version 1.3 which requires transparency to be flattened.
For your issue, try enable Overprint Preview in Acrobat preferences and see you are getting the expected results, use Output Preview panel in Acrobat to turn off individual plate to see if your missing PMS 200U is listed and flat color appears.
If the above does not works please send me the files to reproduce this issue at my end, i will send my email in private message to you.
-Rama

Some D800 Raw files not previewing

Not sure what the problem is, but every so often, I'll have some D800 Raw files (14 bit, lossless compressed), and the .NEF logo will appear sideways in the preview panel. I can only see the image if I open it up in camera raw or Photoshop. Not sure if its based on the memory card that I'm using or what, but the image seems to be fine...
Any ideas? Its kind bothersome going full-screen to preview photos and only to have a sideways icon show up, and even sorta mess up the following images by having the icon remain there...
Thanks
Mike

Next tme it happens go to Tools/cache/purge cache for xxx folder and see if that clears up problem.
lf you have a dedicated scratch file see that it has adequate free space. Cache can grow quite large if not managed.

PDF's in Mail Not Previewing Properly - All Text is small Boxes with "X"'s

Hi, when I attach a .pdf file in Mail the letters of the fonts sow up as small boxes with an "X" in the middle. I have attached PDF's before with no problems viewing them in Mail but now they are unreadable.
I contacted Adobe but the PDF looks fine in other applications. I also open the file and save it using "Preview" and it looks fine until I attach it in an email then the font letters are all boxes with "X" in the middle.
Please Help!

Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account
Try booting into the Safe Mode using your normal account. Disconnect all peripherals except those needed for the test. Shut down the computer and then power it back up after waiting 10 seconds. Immediately after hearing the startup chime, hold down the shift key and continue to hold it until the gray Apple icon and a progress bar appear and again when you log in. The boot up is significantly slower than normal. This will reset some caches, forces a directory check, and disables all startup and login items, among other things. When you reboot normally, the initial reboot may be slower than normal. If the system operates normally, there may be 3rd party applications which are causing a problem. Try deleting/disabling the third party applications after a restart by using the application un-installer. For each disable/delete, you will need to restart if you don’t do them all at once.
Safe Mode - Yosemite
Safe Mode - About

Photos not previewing properly in iMovie hd6

From an external HD I import jpeg photos into imovie hd 6.0.1 to make a slide show. If I do anything else (move slider in frame view) in iMovie using preview goes blank or may revert to the last photo in my iPhoto library (which I am not importing from). Also, after emptying the trash in iMovie mulitiple photos lose the ability to preview (black screen). iMovie 5 never did this. Any suggestions? I'm not sure I understand the 'plist' referred to in other threads.
power mac G5 dual 1.8 Mac OS X (10.4.5)

Updating Ken Burns stills works only until you empty the trash
After emptying the trash, and then selecting the still to be updated via the Media/Photos/Show Photo Settings tab, the appropriate Ken Burns update window appears but the view screen is black and the still isn't updated.
The reason for this bug is that iMovie HD 6 discards the source image of the imported clip when we empty the iMovie trash. In all previous versions of iMovie, that source image was retained in the Media folder, allowing us to later Update the rendered clip. That's no longer true. The image is being tossed out of the iMovie trash, making a future Update impossible. And because the source image is gone, iMovie displays nothing but black in the Preview window.
One workaround, of course, is to never empty the iMovie trash. If you never do that, you'll always be able to Update your rendered images. The bug won't have a chance to bite.
A better way is to trick iMovie into retaining the source image it stores in the Media folder and never discard it when you empty the iMovie trash. If you can force iMovie to retain that source image, you'll always be able to update the rendered clip that uses the image. (Remember, it's only the source image of RENDERED clips that iMovie discards when it shouldn't.) How to force iMovie to keep the image? Make an unrendered clip of the image by importing it with the Ken Burns checkbox OFF, then drag that clip to the Clips pane. Leave it there. Later, to create your animated still-image clip, either import the image again, or Option-drag its twin from the Clips pane to the Timeline. (Option-dragging copies the clip. Then Update it with the Ken Burns checkbox ON. iMovie will render it normally.)
Why does the first clip "protect" the rendered clip? Because this bug is not the smartest bug in the colony. If the source image has been discarded the bug is too dumb to notice, and substitutes black. (That's the bug.) But if the Media folder contains a source image named "Image xxx" the bug uses it, even if it's not officially connected to the rendered clip. So the UNrendered clip protects the RENDERED twin.
Thanks to Iain MacDonald, Al Seper and Karl Petersen for spotting and explaining this bug.

Adobe Bridge CS6 Raw files not previewing.

I recently upgraded my iMac from a 2007 to a mid 2011 Mac ...the first running fine with CS5...the newer iMac with CS6 and 32GB ram. I can't seem to get Bridge in CS6 on the new machine to preview D800 Raw Nef files. Is there something that I need
to do when importing to help the process? What's strange is that the first files in a folder import fine and preview fine. I downloaded 300 or so images from a 32GB card. The first 150 or so worked fine. The rest just don't preview at all. Help!

Did you use a card reader for the download?
Are all the 300 files relatively the same size?
Did you ues Tools/cache/purge and rebuild the folder cache?

One USB Port not Working Properly on MacBook Pro 3,1

I have an older macbook 3,1 running Mavericks OS and recently one of my left USB ports has not been:
1) able to eject external hard drives plugged into it (I have to force eject)-instead it gives me a message that one or more programs may be using it (even though I don't have any programs using it). The hard drive is being powered by USB has a 3.0 connection although this wasn't a problem in the past... I tried the other USB port and it can eject just fine from that port.
2)Intermittent communication with mouse.
Not sure if this is a hardware issue but when I try to run diagnostics on this laptop by holding down the "D" key at startup it doesn't take me to diagnostics. I no longer have the discs for this laptop (containing said hardware test) so I can't boot the diagnostics from that discs. In lieu of a hardware test I opened CONSOLE and did a search for USB and there were a couple of these messages:
8/29/14 12:13:43.000 AM kernel[0]: **** [IOBluetoothHostControllerUSBTransport][SuspendDevice] -- Suspend -- suspendDeviceCallResult = 0x0000 (kIOReturnSuccess) -- 0xdc00 ****
Is this a logic board issue? Would rolling my OS back to pre-Mavericks work? The problem didn't emerge right when I updated to Mavericks however I have had luck changing OS stuff (updating or rolling back) with faulty USBs...
Here are other troubleshooting methods I have attempted with no success:
-Disk Utlity (repair disk and permissions)
-RESET PRAM NVRAM
-Remove battery
-RESET SMC
-Shut Down
-Run Disk Utility @ startup
I'd love to get access to a Hardware Test compatible with my macbook. The links I have found online are to incomplete files. If someone @ Apple could send some Hardware diagnostics tool my way via a disk image that would be perfect.

Did you boot into Recovery or try & run OS X Utilities, to attempt a test?
Depending on the computer, that may be your best bet, short of taking
the computer to an Apple Store with Genius bar; or to an AASP who is
trained in Apple repair & testing services.
A replacement of original install restore DVD with the correct AHT on
a bootable DVD, could be obtained by contacting Apple support or
the main online Apple sales, or applecare; there would be a fee.
They'd need to know the Serial Number and product info, and you'd
have to provide a form of payment in order to get replacement discs;
and if the computer is way too old, those may be harder to get now.
The main system tools could be installed in Recovery partition.
And Ms Sammit may have answered this.
Good luck & happy computing!
edited

HP 7140 xi (All in one) network printer not installing properly? Help?

I have the 7140 setup with a fixed ip address on the network. When I install the HP drivers the setup process hangs. Every time you restart the setup program runs again. Either abort the program or try to setup and watch it hang.
I had the same thing happen with my older G5 after a OS upgrade and had to do a driver reinstall. It would do exactly the same thing. The difference was the install software on the G5 was not the latest from HP's web rather the CD supplied with the printer. This time on the MacBook I am using the latest drivers from the web. Now on my MacBook how do I even get it to print when you cannot set it up? Could HP have an issue having two printers? I have the Laser 2300 dtn working fine also with a fixed ip address (different of course).
Anyone else having the same issues or has solved it yet?
MacBook Intel Mac OS X (10.4.8) 2gig RAM and 120gig HDD

I found the following information on HP's web site.
The address is http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpm35033&lc=en&cc=us&dlc=en& product=91463&rule=36617&lang=en
When I applied the instructions it deleted my HP2300dtn printing but fixed the HP 7140xi (All in one) and got it working great. I will now go back and get te 2300dtn working.
Hope this helps others.

Images not previewing properly in Bridge CS4

I just did a reformat & reinstall of my whole system. I opened Bridge to get back to work and none of my images will preview accurately in Bridge. They just show as horizontal and vertical pixelated representations of the image. I did not have a problem with Bridge until after the reinstall. Anyone have any ideas?
System details: Dell Dimension 8250 (I know, it's a dionsaur, but it works...for now), Windows XP Pro SP3, 1.5gb ram, Intel P4 3.06GHz HT
Thanks, Dana

Hi Dana,
Which settings are you considering and what are the performance issues?
You can optimize for certain workflows that will adjust processor intensive work, such as only generating large previews when displayed. If you're strictly talking about video card accelerated features, I think it's more a matter of On or Off as opposed to performance tuning. I just did a quick look and with video card acceleration enabled, in Full Screen Preview you can pan the image at magnifications much smoother.
regards,
steve
Message was edited by: steve guilhamet

Jquery Mobile Website does not preview properly in Dreamweaver's Live View or in my web browser

I'm using Dreamweaver 12.0 Build 5861.
I can't figure out what I'm doing wrong. I go
File / New / Page from Sample / Mobile Starters / JQuery Mobile with theme (local).
I then save my page.
Then when I go to preview my new page in Live View, it shows a page without any styles, etc.
When I upload the page and additional files created by Dreamweaver to my server. I preview it and it will look like the default style JQuery page, but when I click on the button to see the content for that page, there is not a "back" button to come back to my home page.
Also, when I try to implement a JQuery mobile swatch, the Swatch window says "No Theme Applied."
I feel like I'm missing something really simple,,, but what? Is there a setting I need to change or am I missing a step? I have looked at many video tutorials online and I believe I am taking the same steps.

You're missing the viewport meta attribute. Add ths to your <head> section.
<meta name="viewport" content="width=device-width, minimum-scale=1, maximum-scale=1">
And add this to Line 13:
<div data-role="page" id="page" data-add-back-btn="true">
Do this for all page IDs.

RAW Images not displayed properly

If I send an email to my mum from my iPad3 and she views it on her iPad2 she can see every photo perfectly. However if she looks at the same email on the iMac using Entourage she can't see every photo. As often as not she gets the following error "could not complete request Photoshop does not recognise this type of file" Some come through OK but not all.
I'm sending the images as RAW files as I've imported them straight into my iPad from my camera on holiday. My iPad is running IOS 6.1.3.
My mum's iPad is at 6.1.3 as well. Her iMac is running 10.6.8 and it's Entourage 2008.
Before this happened I was at her house and tried uploading photos directly from my camera to her iMac and it did tell me that it didn't recognise some of the file formats (all were RAW) but I didn't have time to investigate then.
I have since uploaded all of the same files from my camera to my iMac which is running Mountain Lion without any problem.
The camera is a Canon 650D and I can't think of any other info to tell you :-)
Anyone got any ideas?

Good question! The point is that when my mum started using her mac for more than video editing mac mail was a lot worse than today so she chose Entourage. Today, despite my best efforts she refuses to change over and says (with more than a tad of justification!) that as she is now 87 and well used to Entourage she doesn't see why she should have to change.
Believe me if I could get her to use Mac mail I would, but my main task at the moment is to get her to upgrade to Mountain Lion from Snow Leopard so a minor issue such as this with the pictures isn't worth my trying to argue over :-)
Thanks for the help though. Will be trying that later today.
Cheers
Mike

Capture One RAW Tiffs not previewing properly in Aperture

Similar Messages

Maybe you are looking for