CAPTURE PREVIEW SCREEN NOT AVAILABLE

Capturing from CANON XH A1, with all correct settings (I think so...), I can see in Premiere capture screen - original clip in PLAY. But when I press RECORD button, get a screen with multi languages (!) saying "Reprodution in Video Hardware". Clip is really captured, but without Preview.
Otherwise, capturing in HDV Split, with exactly same settings, everything goes easy and correctly!
What am I doing wrong?
Like in previous questions, you help is useful and welcome. Thanks a lot!

This is not so weird.  You need to remember that the transfer from your camera to the computer is a asynchronous communication.  Once the camera starts the transfer, it assumes that the computer is fast enough to transfer the information to the HDD without dropping frames.  With DV, this wasn't a major problem as the DV format allowed a bit for bit transfer at only 4 mb/sec with no processing--hence no processor delays.
However, with HDV, the mpeg file is contained in a wrapper that must be removed before the the mpeg can be displayed and requires a much higher IO rate (25 mb/sec?).  It seems that Adobe made a design decision not to mess with this during capture and to not display the real-time image so as to minimize dropped frames on capture.
There are standalone programs that can capture and display, but these programs have far lower overhead and memory requirements than does Premiere.
Maybe when we're all running 64bit vista on multiple processor motherboards with huge memory and fast disk arrays, this crutch wont be necessary.

Similar Messages

  • HP Officejet Pro 8600 - Print Preview is not available

    I have a new HP Officejet Pro 8600 AIO printer that I purchased last week. I hooked it up to print in a network environment. I have thee window xp systems and three windows 7 systems printing to it with no issues.I am very happy with it. Yesterday my wife told me that when she printed she missed the print preview that our former printer had. I thought I would easily get into the HP 8600 printer program and setup the print preview option. To my surprise after checking in numerous areas and online, I found out that it looks like the option has been left out or not provided for the printer by HP. I realize the MS Office and many other programs have their own print preview however when being online with Google Chrome or Internet Explorer, you quickly realize that the option to select the pages you want to print and not print could save alot of wasted paper and ink. Someone please tell me that a print preview software option is in the works for this otherwise great printer! I can not imagine leaving this out of the printing software package provided.

    Since HP isn't answering me on the 'Print Preview' being available soon or which HP printers software actally HAVE the 'print preview' function enabled... I did some searching and I found a partial answer to the 'print preview' delema.  The web site http://www.obviousidea.com/windows-software/greenc​loud-printer/
    has a free program called GreenCloudPrinter which, in a nut shell, will install a printer? called GreenCloud which set itself up as the default printer and any file that is sent to the printer gets directed to the GreenCloud device which will then bring up a 'print preview' screen with options to remove blank pages and or print or not print the preview!  And a lot of other functions too.  Works great and it's free.  You do have to register it and a registration code is emailed to you to unlock the program. I hope that helps you out... worked for me.

  • Preview Screen Not Working?

    So I have Adobe Premire Elements 10 (yes I know so old), And I almost never use it because when I do use it, the preview screen does not show a preview of my video. I right click on it and select my video, but when i click play, I hear the audio but the preview screen is stuck on the frame of when I hit play. When I hit pause however, it will just to the cerrent frame, it will not update. Now that my youtube channel has grown I need a better editing software than Movie Maker. Please help me get this problem resolved ASAP! Thanks.

    Legendary
    As John has pointed to, this is a known Premiere Elements 10/NVIDIA GeForce issue. It is well documented in the Announcement at the top of this forum as well as
    in my "roll back" thread whose link John has posted. Also see
    ATR Premiere Elements Troubleshooting: PE10: NVIDIA Video Card Driver Roll Back
    The answer to this issue is roll back of the driver version to May 2013.
    But, whether or not that will work for you will depend on the computer operating system involved. If you have Windows 7 32 or 64 bit, the roll back fix of
    driver to May 2013 should work fine for you. But, if your computer operating system is Windows 8 or 8.1 64 bit, then you are not in a good situation. NVIDIA
    older drivers do not go back far enough for these newer operating systems.
    This issue has been specific for Premiere Elements 10/NVIDIA and has not been reported in versions 11, 12, or 13.
    Please review and consider. If any questions or need clarification, please do not hesitate to ask.
    Thank you.
    ATR.

  • Playback only stutters in preview screen, not full screen.

    Brand new iMac 5k, maxed processor and graphics driver, and loaded up with 32gb of ram. Files live on internal 1tb drive. Originally 1080p 30fps MP4 with h.264 codec. Have created proxy, have optimized, have used compressor to switch to prores format. The files play, freezes, then plays again and freezes. Occasionally I get a dropped frame alert when playing on timeline or when previewing original file. Files do not stutter when doing full screen playback! I have turned on and off background rendering also. This is my first foray into FCPX so any help is appreciated. Timeline is set to match the frame rate of clips when I load it in. Beta testing the new Yosemite, could that be it?

    Same here. I sent feedback to Apple since this stuttering didn't occur for me before the beta. I suggest you do the same.

  • TS4196 Share Screen not available

    I have tried to use the "Share Screen" function in Messages beta, but I notice that the option is shaded out.  When I asked someone to send me an invitation to share their screen from iChat, I do not appear as available to them.  My setting show I'm available. ??

    Hi,
    No.
    Apple effectively let AIM or rather seems to give AIM the Apple IDs so that when you go to either https://settings.aim.com/ with @mac.com names or try to "re-register" and name at the registration page  you will get a message about the name being in use.
    At the AIM registration page the full name of the account is technically [email protected]
    However in most cases the username  is normally what you use in AIM capable messaging apps.
    It is possible to activate the name as email as a separate step.
    Currently you may have older @mac.com names from Apple as well as @me.com and @icloud.com issued by the iCloud registration process.
    In Messages and iChat 6 all these variants will work.
    However in iChat 5 and earlier version only the @mac.com names will work due to this Dual Login that the last two version make to me.com as well as AIM.com that allows the password to be "read".
    Summary.
    You can't "re-register" an Apple ID as AIM are already aware of it.
    AIM can't "see" the password until iChat tells them they can look.
    In iChat 6 and Message this includes and extra step that is created by the app also logging in to Me.com and this then confirms that AIM can "read" the password.
    AIM names can be any other email if you wish your name to be that email. [email protected] for example  ([email protected] for another).
    However creating a new name and to show it will be a name that is @Aim.com but this suffix is rarely used in any app - relying on the username only part.
    It can be made to be an active email as a separate step.
    8:34 PM      Wednesday; February 6, 2013
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
      iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.2)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb (Snow Leopard 10.6.8)
     Mac OS X (10.6.8),
     Couple of iPhones and an iPad
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • Share my screen not available

    Greetings all,
    My Niece is at Auburn and I am trying to fix something on her computer but she is unable to share her screen with me. I am running OS-X 10.6.6 and iChat 5.0.3. She is on a MacBook running 10.5.8 and iChat 4.0.9. I can share my screen with her but not the other way. Her Share Screen is enabled. She is using an Airport. Her Dad was able to connect on an Intel iMac but not the Power PC. She mentioned he had to update iChat to 4.0.9 to get it to work which tells me he is on 10.5. Any suggestions?

    Niece misunderstood the diff between Sys Pref and iChat Pref. Thanks anyway...

  • LiveCycle Version 8-PDF Preview not available

    I am designing forms in LiveCycle version 8.0. The PDF Preview is not available. The help file says it's because I don't have Acrobat installed. I have Acrobat Professional version 8 installed. How do I get the PDF preview?

    This just started happening for me today. Yesterday Designer 8 was fine. PDF preview was available. Today, suddenly, it's grayed out in the menu and the PDF Preview tab is missing from the main window... POOF! Gone!
    I have already done a repair of Acrobat 8... how do I get the PDF PReview back? This is absurd!

  • Dynamic Converter problem - Preview not available

    Hi All,
    I have a problem with Dynamic Converter.
    After choosing to edit a particular template and then trying to preview a certain content item, a message is passed saying "Preview is not available". The strange thing is that we are running two different environments where the function is working fine on the other one.
    Any suggestions regarding this?
    Note: We are running 10gR3 with Dynamic Converter 8.1.0.754
    thanks in advance!

    The obvious question is: are you sure you're previewing a content item that's "convertible" and also exists?
    The template editor only remembers the last content ID you picked. So if you pick item A for environment X and then B for environment Z, the editor will always load up B the next time you open up the editor. So if you edit the template in X again, and B doesn't exist in X, you'll get that error.
    Don't know if your problem is as simple as that though. We're running DC 8.1.0.735 and don't get any preview errors outside of the scenarios I listed above.
    Good luck.

  • Preview not available

    Hello:
    I'm running Lightroom 3.6 on Windows XP.  My laptop crashed and I had to re-install Lightroom.  When I try to import my photos, I'm receiving "Preview is not available for this file".
    Can someone help me out?  Lightroom was working perfectly before the crash and I don't quite understand what happened during the install process.
    Thanks in advance.

    Just finished a similar exercise.  Finally figured out I needed to upgrade LR from 3.0 to 3.3 then to 3.6.  You might check to see if you are running in 3.0.

  • Acrobat 9.5.1.283 Preview Handler not working

    Windows XP Professional - fully patched.
    Adobe Acrobat 9.5.1.283 - fully updated.
    AcroReader 10.1.3.23
    When trying to view the preview within Windows Explorer, it indicates that the "Preview is not available".
    Is it necessary to enable the Preview Handler and if so, what is that process?  If it worked in the past and no longer works now, what would need to be done to re-enable this option?
    Large number of stored PDFs with names that do not define the content of the documents are causing a great strain on using the PDF format.
    Please assist if at all possible.
    Regards,
    Larry W.

    You should do the install as the administrator and with anti-virus disabled. Usually the error indicates the patch could not be opened (may be corrupt or not in an accessable folder -- using the administrator might help here). When this happens it is often best to just download the updates (but do a repair first with Help>Repair) from http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and install them in order.
    There are instructions for downloading the install at http://forums.adobe.com/thread/1061905. However, you still need the SN. You should always backup your downloads to a CD or backup HD when you purchase such products. You should not expect the files to be around online indefinitely. Be sure you also record the SN for the future.

  • Clearer capture preview window?

    I would like to send a feed from my video mixer into final cut and use the capture preview window in final cut as my preview monitor. the problem is that the capture preview is staggered. Is there a way to get a higher quality capture preview?

    Not sure if this will help, but instead of digitizing in FCP, try digitizing in Quicktime instead - Quicktime>File>New Movie Recording. You can set the codec in the preferences and the window seems to exhibit less artifacts than the capture window in FCP.
    Once you are done, just import the quicktime you've made into FCP.
    Hope this helps.

  • File preview in Finder not available, only thumbnails. How to fix?

    When selecting a file and clicking the space bar, I used to be able to get a preview of the file on the screen that allowed me to scroll through the file (I guess this uses a rendering engine of the application that supports the file format, e.g. MS Powerpoint or Word, so this is not an issue related to the Preview app). This is not available any more. When selecting a file in Finder in Mavericks and then hitting the space bar I only get a thumbnail of the file displayed, usually the first page of the file if it is a document. The preview facility as it was before is extremely useful.

    I never knew of this feature with the space bar before. But I just tried it and it does open the selected document in a little preview window. Is this what you want to see?
    When I pressed the space bar on this file, this window opened and I was able to scroll through the 3 or 4 pages worth. As you can see I have the option to open it in MS Word if I want to.
    This is the same window that opens up when you click on "Quick Look". I don't recall if "Quick Look" is in the menu bar of the Finder Window by default. But if it's not, just right click on the menu bar of the Finder Window and add it to where ever you want it.
    Also, see where it says View and gives me 4 options? I use the 3rd option as it gives me a smaller preview of the selected file.
    Hope this helps.
    KOT

  • Loop at screen - not all fields are available

    Hi all,
    I want to set some fields on the screen invisible.
    When I do the loop at screen in PBO not all fields from the screen are available.
    Just four fields are available. In the screen there are about 20 fields.
    I try to use the chain. field xyz. endchain... But it was not the problem.
    Any ideas?
    regards

    Try this ,May be  Help ful
    { SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_cars.
    PARAMETERS : r_cars RADIOBUTTON GROUP rgb USER-COMMAND usd .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_toyota .
    PARAMETERS : r_toyota RADIOBUTTON GROUP rgb1 DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_ford .
    PARAMETERS : r_ford RADIOBUTTON GROUP rgb1 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 2(10)  FOR FIELD r_bus .
    PARAMETERS : r_bus RADIOBUTTON GROUP rgb DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_volvo .
    PARAMETERS : r_volvo RADIOBUTTON GROUP rgb2 .
    SELECTION-SCREEN END OF LINE.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 20(10)  FOR FIELD r_merced .
    PARAMETERS : r_merced RADIOBUTTON GROUP rgb2  DEFAULT 'X'.
    SELECTION-SCREEN END OF LINE.
    AT SELECTION-SCREEN OUTPUT.  " AT SELECTION-SCREEN OUTPUT
      IF r_cars = 'X'.                                 " If R_CURS radiobutton is selected
        LOOP AT SCREEN .                       " Looping at screen
          IF screen-name CS 'R_VOLVO' OR
             screen-name CS 'R_MERCED'.
            screen-active = 0.                     " Hiding the R_VOLVO and R_MERCED
            MODIFY SCREEN.
          ENDIF.
        ENDLOOP.
      ELSE.
        LOOP AT SCREEN .
          IF screen-name CS 'R_TOYOTA' OR
             screen-name CS 'R_FORD'.
            screen-active = 0.
          ENDIF.
          MODIFY SCREEN.
        ENDLOOP.
      ENDIF. }

  • MIGO-Capturing problem-Item is not available for Excise invoice,deselect th

    Hi Gurus
    while doing MIGO and part 1 posting am getting following error
    MIGO-Capturing problem-Item is not available for Excise invoice,deselect the item
    kindly help in this
    Maruthi

    hi
    check all settings in J1ID
    or
    in po did u got ur all values correctly for excise cess and hcess
    if yes then check ur vendor excise details in j1id
    if above setting are done properly then check ur CIN setting in spro>log gen>tax on goods movement >india>account determination >specify excise acct as per transaction/specify G/L acct as per transaction
    regards
    kunal

  • HT201365 How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    How do I download Whatsaap, Facebook and Skype into my home screen. When I try it gives me an erros message saying that this is not available in a Panamanian store and I live in the US. HELP????

    Change your country on iPhone, iPad, or iPod touch
    Tap iTunes Store, App Store, or iBooks Store.
    At the bottom of the Featured page, tap Sign In.
    If you're already signed in, skip to step 5.
    Tap Use Existing Apple ID.
    Enter your Apple ID and password and tap OK.
    Tap your Apple ID.
    Tap View Apple ID or View Account.
    Tap Country/Region.
    Tap Change Country or Region.
    Tap the Store menu and tap your country.
    Tap Next.
    Review the Terms and Conditions and Apple Privacy Policy.
    Tap Agree if you agree to the terms and conditions.
    In the prompt that appears, tap Agree.
    Select a payment method and enter your payment information.
    Enter your billing address and tap Next.

Maybe you are looking for