Capture problem, it seem not to capture more than 3 secs

Hi all, currently working with a panasonic AJ SD93 video with a firewire connection, when i try to capture loggin or capture now seem to crash in 3 seconds , i had a look around the preferences but i can´t see the problem
Thanks

Don't know if it will resolve your problem, but I have a plugin from Panasonic that disables the deck polling of FCP5 and above. It reduces the frequency of deck polling by half, and resolves some deck control problems with Panny decks.
Email me - my address is in my Profile - and I'll send it to you.

Similar Messages

  • Error using pretrigger when capturing more than one channel

    I am having problems acquiring data with pretrigger samples when capturing more than one channel, using NI-PXI-6071E hardware and Labview's Analog Input VIs (Legacy NI-DAQ).
    My goal is to trigger on one signal, while capturing another. Unfortunately, I cannot use the PFI0 for external triggering, as our cables/hardware have already been built, so I must use an analog input channel as the trigger. I understand that to do so I must capture both channels, and the channel that I wish to trigger off of must be the first channel in the list.
    If I trigger and capture on the same channel (tried 1-4) then it
    works great, regardless of the number of pre-trigger samples set. If I
    capture more than one channel (passing the trigger channel first), with no pretrigger samples set, then triggering and capturing both work fine. However, if I do the same with the pretrigger sample > 0 I get the following error:
    Error -10621 occurred at AI Control. Possible reason(s):
    NI-DAQ LV: The specified trigger signal cannot be assigned to the trigger resource.  
    I don't se any such limitation explained in the user manual, and searching the forum, I have found a few other people that had the
    same
    problem
    but they did not have solutions. Any ideas?
    Solved!
    Go to Solution.

    I'm sorry for double-posting this. I was trying to post it in the DAQ board and it kept ending up on the LabView board.
    If moderators have the ability to delete this thread you are welcome to do so.

  • Songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

    I have Imatch and songs stop playing on my iphone I try to start it again and it will not play for more than 2-4 seconds, does anyone have the solution to this problem?

    By "hard reset" you mean hold down the Home and power buttons until the iOS device restarts, correct?

  • Can not color label more than one file at a time

    Hi,
    I've had this problem since 10.6.6-ish, i can not color label more than one file at a time in the Finder.
    Wether i select two, twenty or twohundred only one file gets color labeled.
    It doesn't seem to matter if i assign a color label through the File menu or right click > label.
    Figured a re-install might fix this but it hasn't (even a clean install without restoring any kind of backup).
    Does anyone else have this issue and/or a fix for it?
    Thanks,
    Jay

    Aaaaanyone ?

  • Bought a ipod nano 6th and is not playing for more than 2 min?

    bought a ipod nano 6th and is not playing for more than 2 min?

    The most likely problem is that the headset is not inserted fully. When you insert the headset, you should feel and hear a "Click" to let you know it is inserted all the way.
    The problem is that if it is not inserted all the way, the nano does not detect it. If it is not detected, it will pause playback when the screen goes dark. This is to keep your battery from draining when there is nothing connected to listen to the music.
    i

  • LSMW For Converting Open Sales Orders (not working for more than 1 item)

    Hi,
    I am using following standard object for Open sales orders .
    Object               0090   Sales documents                   
    Method               0000                                     
    Program Name         RVINVB10                                 
    Program Type         D   Direct Input                         
    Its not working for more than 1 line item.
    For more than 1 line item its giving Error saying that
    '102122                         V1                   845
    Print parameter SAPML2 1 is not defined
    Can anybody help me out in this regard.
    Thanks in advance.
    Nitin.

    hello, friend.
    i will still research the subject.  but the first thing that comes into my mind is t-code VA05.  with this, you have the option to change the Plant en masse.  so a possible workaround is for you to list a number of sales orders using VA05.  you then sort the line items by Plant.  choose all items with the same plant, change the plant via mass change... then change back to the original plant.  hopefully, the new settings should apply.
    do test a few sales orders by doing this for a larger scope.
    regards.

  • Server does not support setting more than 5 shared access policy identifiers on a single container

    Hi,
    I upload a video file to a new Asset. I then attempt to create a streaming URL by creating an Access Policy and then a Locator, which I use to generate the URL used for streaming.This works great. Until the 6th time you execute
    that code against the same Asset. Then you receive this error:
    "Server does not support setting more than 5 shared access policy identifiers on a single container."
    So, that's fine. I don't need to create a new AccessPolicy everytime, I can reuse the one I've created previously, build a Locator using that same policy. However, even then, I get the error about 5 shared access policies on a single container.
    Is this the Lmitation of media service? or am I missing something?
    Following is the code I used for this:
    if (AssetId != "")
                    inputAsset = (from a in _context.Assets
                                  where a.Id == AssetId
                                  select a).FirstOrDefault();
                    policy= (from a in _context.AccessPolicies where a.Name==inputAsset.Name select a).FirstOrDefault();
                    var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                    var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                    assetFile.Upload(singleFilePath);
                    locator.Delete();
                    MediaElement media = new MediaElement();
                    media.AssetId = inputAsset.Id;
                    media.Title = Path.GetFileName(singleFilePath);
                    var result = Save(media, singleFilePath);
                    return inputAsset;
                else
                    inputAsset = _context.Assets.Create(User.Identity.Name, AssetCreationOptions.None);
                     policy = _context.AccessPolicies.Create(
                                        inputAsset.Name,
                                        TimeSpan.FromDays(30),
                                        AccessPermissions.Write | AccessPermissions.List
    | AccessPermissions.Read | AccessPermissions.Delete);
                     var assetFile = inputAsset.AssetFiles.Create(Path.GetFileName(singleFilePath));
                     var locator = _context.Locators.CreateLocator(LocatorType.Sas, inputAsset, policy);
                     assetFile.Upload(singleFilePath);
                     locator.Delete();
                     policy.Delete();
                     MediaElement media = new MediaElement();
                     media.AssetId = inputAsset.Id;
                     media.Title = Path.GetFileName(singleFilePath);
                     var result = Save(media, singleFilePath);
                     return inputAsset;

    Hi,
    I found some information related to
    Stored Access Policy , Shared Access Signatures   please check if it helps.
    Regards,
    Shirisha Paderu.

  • How to identify the no is prime or not ,no is more than 9 digit?

    how to identify the no is prime or not ,no is more than 9 digit?
    becaz long does not store more than 9 digit , like example
    long number=9876543218; // it will throw the compile time error
    so how to get this?

    It is too easy to understand whether the given value
    is prime or not.
    THe following code snippet does this .
         public boolean isPrime(int pr){
              int num = 0;
              for(int a = 2; a < pr; a++ ){
                   if(pr % a == 0)
                        num = 1;
              if(num == 1)
                   return false;
              else
                   return true;
         }(Simple eh)And if you end at the square root of pr you get a nice speedup. You can get a further speedup by changing the incrementation strategy (2x really easily, 6x if you start at 5 (explicit test for 2 and 3) and increment alternatively by 2 and 4), but that's not entirely necessary.
    ~Cheers

  • My iPhoto was deleted so I re-installed it, since then iPhoto will not say open more than 10-15 seconds.  How do I get it to stay open and keep my pictures?

    My iPhoto was deleted so I re-installed it & since then, iPhoto will not say open more than 10-15 seconds.  How do I get it to stay open and keep my pictures?
    It's a MacBook Pro, I got it last year (2010) not sure where to find the operating system info. 
    Please Please Please Help!
    Thanks!
    Katie

    I always recommend backing up the iPhoto Library file under your Pictures folder first.
    You can try removing the iPhoto Preference file in your User Library folder. Close iPhoto. If you are using Snow Leopard (10.6) click on Go in the Finder menu bar. Click on Library. If you are now on Lion (10.7), you'll have to hold Option key while clicking Go to see the Library selection. Once here, find the Preferences folder. In here, look for the following:
    com.apple.iPhoto.plist
    Move this file to the desktop. Start iPhoto and see what happens. If it is working, you can delete the file you moved to the desktop. This should not delete any photos, but will reset iPhoto as if it's the first time you are opening it (so your preferences you set may need to be set back).
    If this doesn't work, let me know.

  • HT201365 Since uploading 7.0 I cant play any game for more than 5 sec.without screen flipping to Apps. page. Anyone else have this problem??

    Since uploading to 7.0.2 cant play any game for more than 5 sec. without screen flipping to Apps. page. What to do??

    Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.

  • BI_PROCESS_INDEX is taking more than 6000 sec of duration....

    Hi Folks,
    Here is performance issue..
    In the process chain having the process variant BI_PROCESS_INDEX : which is creating the indexes for 3 cubes, like C01, C02 and C03.
    C01 and C02: Creating indexes for these cubes taking time not more than 1500 sec duration.
    C03 cube is taking nearlly 5000 sec duration...
    Can any one share your inputs, how we can reduce time for the creating indexes cube C03.
    Thanks,
    Ven

    Hi...
    Just check in SM37....whether any ODS activation or Roll up job is going on or not............if so..........Go to Job details...copy the PID no........sometimes ODS activation and Roll Jobs create locks for index Jobs.........we often face this issue........
    Then go to ST04............Lockwaits....Expand the nodes.search for that PID...........if u r able to find that PID there.it means those jobs r creating locks.........then Cancel those jobs..........index Job will complete very soon.........after that repeat those ODS activation and Roll up jobs.........
    Also Check the System Log in SM21...............and Shortdumps in ST22.........may be the overall system performance is poor..........due to this job is taking long time......
    Regards,
    Debjani........

  • Jumpy streaming once paused for more than 10 secs...

    Hello everyone,
    I have a player set up to stream live tv channels. It works fine except when paused for more than 10 secs or so, it continues to stream but very jumpy, as if we press on advance/rewind button.
    If you have any idea or have encountered the same problem, please share.
    Your input is very appreciated.
    Regards,
    Niusaul

    Hello,
    I am using FMS...
    I was able to fix it the problem.
    Thx ;-)

  • My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    My Iphone rings but screen is blank held the power button for more than 10 sec but in vain

    Hello waseem.abdul_hadi,
    It may be that your Screen Curtain has been activated. This can be deactivated by triple-tapping the screen with three fingers.
    Turn the screen curtain on or off. Triple-tap with three fingers. When the screen curtain is on, the screen contents are active even though the display is turned off.
    iPhone User Guide - Use iPhone with VoiceOver
    http://help.apple.com/iphone/7/
    Cheers,
    Allen

  • I am having the  problem . it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone. i have taken the sim card out and put it back in even then its of no use. if any one out there can help us it would be very nice

    i am having the  problem in my 3gs iphone. it says it shouldnt take more than 3 minutes then i get this message Could not activate iphone.
    i have taken the sim card out and put it back in even then its of no use.
    if any one out there can help us it would be very nice of them. thank you for your time.

    I can not get to iPhone screen, so no way to get to Settings. That is the problem. When I connect phone to iTunes I get screen asking to insert SIN card. On the phone I'm getting Cinfigure screen asking Launguage , Country or Region, Wi-Fi, ( I can connect to my home wi-fi), and last screen "Activating your iPhone". After two minutes of waiting IM getting message: Your iPhone could not be activated because the activation server in temporary unavailable. try connecting to iTunes or try later or contat apple.com/support.
    Like I mention, I went to Bell as well Rogers store and tried to insert active SIM card with no results.
    Yes, my friend unlock the phone to use with Rogers but I don't know where

  • Problems with failover  which is taking more than 5 min

    Hi,
    I'm new to Weblogic world and facing some problems in failover.
    I have plugin configuration as below.
    In the httpd.conf file
    # Configure Performance settings
    Timeout 45
    ListenBacklog 1000
    KeepAlive On
    MaxKeepAliveRequests 0
    KeepAliveTimeout 15
    <IfModule mpm_winnt.c>
    ThreadLimit 500
    ServerLimit 6
    StartServers 2
    MaxClients 3000
    MinSpareThreads 500
    MaxSpareThreads 3000
    ThreadsPerChild 500
    MaxRequestsPerChild 0
    </IfModule>
    # EnableMMAP off
    # EnableSendfile off
    # Configure DoS Settings
    # Max Body size in HTTP Request of 100Mb
    # Max HTTP headers set to 50
    # Max HTTP header size to 8Kb
    LimitRequestLine 8190
    LimitRequestFields 50
    LimitRequestFieldSize 8096
    LimitRequestBody 104857600
    RLimitCPU 300 300
    RLimitMem 8192000 8192000
    #RLimitNPROC 20 20
    # EnableMMAP off
    # EnableSendfile off
    this Configuration is in Weblogic plugin as we have seperate the configuration and included this in the httpd.conf
    <IfModule mod_weblogic.c>
    WebLogicCluster ********************************
    KeepAliveEnabled ON
    KeepAliveSecs 30
    CookieName PSJSESSION_ID
    DebugConfigInfo ON
    WLIOTimeoutSecs 4000
    # Debug ALL
    # WLLogFile /u01/PWCapache/logs/staging-orbit-emea.pwcinternal.com/wlproxy_http.log
    </IfModule>
    Asuming 01 & 02
    We stopped one side of the weblogic server(01) and tried the failovering, requests are going to the 02 side absolutely fine but still the plugin is sending the requests to the 01 side and its taking more than 5 min to route to available (02 which is up).
    My thoughts are to reduce the WLIOTimeoutSecs 4000 to 300 value... and introduce DynamicServerList value(at the moment this value is not set not sure how the apache behaves if this value is not set any suggestion on this pls?)
    as well as to introduce ConnectTimeoutSecs (10)& ConnectRetrySecs(2)
    Could somebody please point to the solution for this?
    Edited by: user2659864 on 14-Dec-2010 01:55

    Hi,
    If you are completely shutting down the server-01 then once the server-02 sends the response back to the proxy then it would have the fresh list of which servers are running properly, hence if still the proxy is sending the request to the server-01 then this mean that the Apache process have not shared the dynamic server list with the other process or it seems to be a bug in the WLS plugin.
    Suggestion try to use the latest WLS plugin and see if you can solve this issue as most of the time it would not be a an issue with WLS plugin.
    And if you are suspending the server-01 then the below link would give you a better idea on it as how things works.
    Topic: 404 error with Apache and Suspended Weblogic managed server
    http://middlewaremagic.com/weblogic/?p=4567
    Secondly by default the value of "WLIOTimeoutSecs " is 300 seconds so if you don't give this value then it would take 300 seconds which goes with "Idempotent" value which is by default "on", hence if the server is not able to send the response then it would fail over the second server after waiting 300 sec . Thus if you decrease the value of "WLIOTimeoutSecs " it would help you in case. More information can be seen below.
    Topic: General Parameters for Web Server Plug-Ins
    http://download.oracle.com/docs/cd/E12840_01/wls/docs103/plugins/plugin_params.html#wp1143055
    Hope that would answer all your questions :)
    Regards,
    Ravish Mody
    http://middlewaremagic.com/weblogic/
    Come, Join Us and Experience The Magic…

Maybe you are looking for