Capture Problem with "escape" command and error message

Just got my Final Cut Express this week and I'm already having weird dreams about editing... I'm logging about 5 to 7 hours per night trying to figure it all out.
Anyway, my most pressing issue is that while I am in the "capture" window and I rewind my tape (a Panasonic PV-GS320) (also, running this on my macbook pro with system 10.5.2 just loaded) - I press "now" because that seems to be the easiest to start with and when I try to stop and press "escape" it won't stop. So I tried pressing option/esc and it stops but I get the following message: " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape. This may cause the video and audio of these media files to be out of sync. Make sure the audio sample rate of your capture preset matches the sample rate of your tape.
I have some ideas but I wanted to get started working out this issue. Thanks for any help with this all you FXC gurus out there.

I recorded this in dv widescreen which imports fine in imovie. I am importing in DV NTSC 48Hz. I've tried all the settings. I know I have to probably just find the right mix of settings. I've tried changing the settings in the camera to 4:3 and back to 16:9 but I guess if you record in widescreen, you are stuck with that format. But this is actually a DV not an HDV camera

Similar Messages

Problem with file opening and error message

Hi there,
In CP 7, I am having a problem opening a file adn was wondering if anyone else has had this and whether the file was recoverd effectively or at all...
See message below
Cheers
Rossdo

Are you trying to open a CP8 file in CP7? If you are facing the problem with CP7 file itself, first thing you need to do is check whether you got any .lck file (lock file) in the source file folder, which indicates that the file was opened and not closed properly.
If not, try the method here:
Recovering the project « Rapid eLearning | Adobe Captivate Blog
Sreekanth

Numerous problems with X1 platform and error message RDK-03032

Daily I have problem with the X1 system where the TV signal goes out and I get a message that says " Call 1-800-XFINITY and reference RDK-03032." This problem is randum and can occur at any time of day, resulting in outages for many hours, or usually the remainder of the day. If I call Comcast customer service, usually the wait is usually about 20 minutes before someone comes on and goes through another process of sending signals to my box, at which time they say they need to send a technician out. I then get a call from the technician who says he doesn't need to come out because the problem is with XFINITY's network, and that they are working on it. If I call back into customer service, I need to first make sure I have about an hour for the process because the customer support person has to go through the same diagnostic test of sending signals to confirm the system is down, before they will refer the problem back to a technician in the field. Usually during this diagnostic process, the technician puts me on hold for another 30 minutes, at which time the phone is hung up, at which time I have to start the process all over again. RDK-03032 problem continues to occur with no resolution and no one seems to be able to tell me what the problem is, or how to fix it, and no one in customer support knows how to fix this problem. I have no idea how to get this problem resolved. Does anyone have any idea?

awsomely sad / they put this item on the market and i would recomemmend you contact the fcc for a form to fill out a complaint asap as i will be doing as soon as i receive the letter in the mail , they say it is a latency problem . late is late but no show at all for hours on end is the new future. what is that suppossed to keep us victoms happy untill they can figure out what to do to cover theyre mistakes , now they are trying to replace the incoming signal which has left me with no services 10 times in 14 days , i watched a tech install a new cable from pole to house with 2 supervisors standing rigth there , when the 12th visit by a tech i explained my story and the tech said let me look out side 1 hour later after my services were cut off again the tech came to my door and told me the cable from my house to the pole was terrible and rotten and needed to be replaced again , i knew he was lying but it was after 7 pm and i had enough , i saw them a week or so before , as did the 2 supervisors , cut a brand new peice of the roll in his truck replace it with new ends , a totally new peice , so i guess the cable they are using only has a 2 week life expectancy or the tech was lying , which i beleive the tech wanted to get paid for the call , so he probably did but once again my xi service is not right still , when they get to far in they start lying because they are probably getting screwed for have to service this x1 numerous times , when i sit here and listen to the supervisors and techs tell me that the system is the problem and they are trying every 3 months to figure what the last program upgrade has screwed up for them and laugh jokingly it doesent give you to much faith in theyre ability to resolve any issues with this system face it we have no recoarse . over 200 hrs on the phone . i must have talked to every employee in the company even tom karinshank yhe ceo was contacted and after his rep sat there and picked appart evry thing i said got rude and now wont return my calls or emails they pass it to the next person , ????????????????????????????????????

Problems with iPhone 3G Activation , Error Message (-50), Need HELP!!!!!!!!

Hi,
I bought the iphone 3G yesterday through Virgin Mobile. I was told to activate my iphone I need to sync it with iTunes.
I plugged in my iPhone and it try to sync for a while then an error message pops up. (*We could not complete your iTunes Store request. An unknown error occured. (-50).There was an error in iTumes store. Please try again later*.)
I've tried several things, reinstalling iTunes, change the options in my internet browser (Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.0.5) Gecko/2008120122 Firefox/3.0.5), turn off my anti-virus software. But the problem still occur.
I can access iTunes store and my playlists etc, but when I click on Sign-in and then click on create new account the same error message pops up again.
I've tried to run diagnostics on iTumes. It says that secure link to iTunes store failed. I've passed all connectivity and sync test. Below is the details,
Microsoft Windows XP Home Edition Service Pack 3 (Build 2600)
LENOVO 0658A22
iTunes 8.0.2.20
QuickTime 7.5.5
FairPlay 1.1.11
CD Driver 2.0.7.5
CD Driver DLL 2.1.1.1
Apple Mobile Device 2.1.2.7
Bonjour 1.0.6.2 (118.5)
iTunes Serial Number D763986FFBC26648
Current user is an administrator.
The current local date and time is 2009-01-16 00:15:20.
iTunes is not running in safe mode.
Video Display Information
Mobile Intel(R) 945GM Express Chipset Family
Mobile Intel(R) 945GM Express Chipset Family
** External Plug-ins Information **
No external plug-ins installed.
** Network Connectivity Tests **
Network Adapter Information
Adapter Name: {CF15D5A8-9110-4EEF-9AFC-3CC17DD113AE}
Description: Intel(R) PRO/Wireless 3945ABG Network Connection - Packet Scheduler Miniport
IP Address: 192.168.1.4
Subnet Mask: 255.255.255.0
Default Gateway: 192.168.1.1
DHCP Enabled: Yes
DHCP Server: 192.168.1.1
Lease Obtained: Fri Jan 16 00:09:58 2009
Lease Expires: Fri Jan 16 01:09:58 2009
DNS Servers: 192.168.1.1
192.168.1.1
Adapter Name: {F7421B4F-64B7-47A9-BFDD-A004DE5F7FCB}
Description: Broadcom NetXtreme Gigabit Ethernet - Packet Scheduler Miniport
IP Address: 0.0.0.0
Subnet Mask: 0.0.0.0
Default Gateway:
DHCP Enabled: Yes
DHCP Server: 255.255.255.255
Lease Obtained: Fri Nov 07 17:38:56 2008
Lease Expires: Tue Jan 19 13:14:07 2038
DNS Servers:
Active Connection: LAN 連線
Connected: Yes
Online: Yes
Using Modem: No
Using LAN: Yes
Using Proxy: No
SSL 3.0 Support: Enabled
TLS 1.0 Support: Disabled
Firewall Information
Windows Firewall is on.
iTunes is enabled in Windows Firewall.
Connection attempt to Apple web site was successful.
Connection attempt to iTunes Store was successful.
Secure connection attempt to iTunes Store was unsuccessful.
An unknown error occurred (-50).
Secure connection attempt to iPhone activation server unsuccessful.
An unknown error occurred (-50).
Last successful store access was 2009-01-16 00:10:18.
** iPod/iPhone Connectivity Tests **
iPodService 8.0.2.20 is currently running.
iTunesHelper 8.0.2.20 is currently running.
Apple Mobile Device service 2.12.33.0 is currently running.
Universal Serial Bus Controllers:
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C8. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27C9. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CA. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB Universal Host Controller - 27CB. Device is working properly.
Intel(R) 82801G (ICH7 Family) USB2 Enhanced Host Controller - 27CC. Device is working properly.
No FireWire (IEEE 1394) Host Controller found.
Connected Device Information:
iPhone, running firmware version 2.2
Serial Number: 878514GXY7K
** iPhone/iPod Touch Sync Tests **
Sync tests completed successfully.
Anyone have an idea of what's happening please let me know. I really want to start using my iphone.
Thanks heaps
Bec

No need to SHOUT. The cable is the one used to connect your iPhone to your PC. Suggest getting another one.
The problem may be that you're using USB to connect to the internet. It's too slow and will cause problems when you have other high speed USB connections. Use an Ethernet connection to your modem/router. For additional troubleshooting, see these Apple support articles:
http://support.apple.com/kb/TS1495
http://www.apple.com/support/iphone/troubleshooting/
Message was edited by: modular747

Media center problem with Qosmio G35-650 - error message

hello all
I have a problem with media center on qosmio g35-650.
When starting live tv , an error message appears and writes "application failure please restart your computer again. if problem persists again please contact with your hardware assistance"
It was working yesterday and today something happened.
Also it cant find any tv signal available. Is it a hardware problem?
regards
cem mete

Hello
Please dont be mad on me but in most cases is the user the problem and not the machine. I really dont know what is problem in your case but if the unit has well TV signal there should not be any problem.
Your unit must be an US model. Those notebooks are not known to me but I presume that Qosmio player is preinstalled too. I have G20 and TV works perfect (WMCE and Qosmio player). What is with Qosmio player in your case? Does it work well?
Be sure that TV tuner is listed properly in device manager and also TV antenna is connected properly.

Problem with shell commands and scripts from an Applescript Application

Hi-
I am fairly new to OSX software development. I am trying to build an application that creates a reverse SSH tunnel to my computer and starts OSXvnc. The idea is that my Mom or anyone else who needs help can connect to me without having to tinker with their firewalls.
There are plenty of resources on how to do this, and I have found them. What I have a problem with is the following.
I am building this application in Xcode as an Applescript application, because Applescript and shell scripting are the only forms of programming I know. I use an expect script to connect through SSH, and a "do shell script" for the raw OSXvnc-server application to allow screen sharing.
The problem is that when I click on the button to launch OSXvnc-server or the button to launch SSH, the application freezes until the process it spawns is killed or finishes. For example, I can set SSH to timeout after 60 seconds of no connection, and then the Applescript application responds again. I even tried using the ssh -f command to fork the process, but that doesn't seem to help.
I am also using "try" around each of the items.
What am I doing wrong? How can I make the buttons in my app launch SSH and OSXvnc-server without hanging the application while it waits for them to finish?
Thanks so much!

See here for an explanation of the syntax.
(20960)

'A problem with the cooling system' error message on Satellite A660

Hi all,
Hope I can get some help here. I've had about 5 HP laptops after all of them had problems and faults. I got sick of them and therefore got a refund and bought a high spec A660-1FH.
The A660 has been a great laptop for two days until yesterday when I started getting a warning message saying 'A problem with the cooling system has been detected. Please turn off the computer immediately, and return it for service'.
The cpu fan works fine as you can here it spinning and the temperature of the i5-460m processor is around 40 degrees for both cores - which seems normal to me. I've noted that it happens only when running on battery and if you switch from eco utility to power saver mode. Its fine when running on the 'balanced' power setting. The fan is louder before when this message appears.
As its under 28 days my retailer swapped it for a brand new one straight away. Got the new one home, and the same message appears again. Has anyone else experienced this. As two laptops have had this, I'm wondering if this is normal for the A660 series laptop or if there is really a hardware issue?!
I have tried to upgrade eco utility and the bios of the laptop but both are the latest versions. Can anyone help or share if they experience a similar issue with their laptop?
Thanks

In front of me I have Satellite A660-13Q (PSAW3E) and I have it about 6 weeks now. It runs almost 10 hours daily and until now I didnt notice such message or anything else that can be suspect for hardware functionality.
I really dont know why this happen on your notebook and dont think there is anything you can do about it.
I would exchange it again. What you can also try is to contact nearest Toshiba service. Make a call, explain the situation and ask if they can help you with this.

IChat 4.0 shows up with no buddies and error message

I can see the AIM buddy list through ichat 4.0 and it says "available" but then shows all my buddies offline when that is incorrect. after a while it gives an error message saying i have tried logging in too many times and to try again later. please help!!!

Hi
Try logging on to AIM on port 443 rather than port 5190.
Go to IChat in the menu bar > Preferences > Accounts.
Log out of AIM and then use the Server Settings tab
Set the port to 443.
Log back in again.
Tony

Display problems with print commands and options

What fonts are required to be installed in windows for Reader X to display all of its component parts? My fonts were cleaned out and now the print selection screen only displays a blank image with no letters or buttons. It would be nice not to have to reinstall 1000 fonts just to find the right ones.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

Help Needed With Scripting and Error Messages

    I am working to build a script to change orders in SAP using Java. I begun by recording steps and combining them. I am having issues with the Warning and Error Messages. Can someone help me write language to have the script enter through the warnings or errors if they pop up, but move to the next step if nothing pops up?? Some orders have the message, some do not, some have multiples... etc...
Thanks!!

Hello Jamie.
Getting popup you can use an Loop like below (this is now for Excel VBA coded):
For Each subWindow In Session.Children
            If subWindow.Name = "wnd[1]" Then
                On Error Resume Next
                Session.FindById("wnd[1]").sendVKey 0
                Session.FindById("wnd[1]/usr/btnANSWER_YES").press
                Session.FindById("wnd[1]/usr/btnSPOP-OPTION2").press
            End If
        Next
For Messages in SAP session statusbar like this:
If Session.FindById("wnd[0]/sbar").Text <> "" Then ...
To catch error Messages defined by messagetype you can use this:
If Session.FindById("wnd[0]/sbar").messagetype = "S" Then ... 'sucess messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "I" Then ... 'Information messagetype
If Session.FindById("wnd[0]/sbar").messagetype = "E" Then ... 'Error messagetype
Aso...like we have in SAP
Hope this help a bit to achieve your requirements.
Best regards,
Holger

When i try to order prints i get an error message saying there is a problem with my network and my network is working

when i try to order prints i get an error message saying there is a problem with my network and my network is working. How can i solve this problem?

Try a different media. I have good luck using Maxell discs.

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server?

I upgraded to Lion yesterday. Now I keep getting and error message: there was a problem connecting to the server. URLs with type "file:" are not supported. What server? How do I get rid of this.

Take a look at this link, https://discussions.apple.com/message/16156214#16156214

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error.

I'm having problems with 8.1 and Continuity / Handoff. It will work fine for web pages, etc. but in email when I try to do it between by iPhone 5s running 8.1 and my Macbook Pro running Yosemite I consistently get an error. "Failed to Continue Activity" Cocoa Error 4609. Handoff is working for phone calls and text messages. By email just crashes each time. It was also doing it under 8.0.2. My iPhone and iPad handle this fine. It's only the MacBook to the iPhone that fails, and only on email.

Handoff Continuity Troubleshooting

TS2634 My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What

My problem - when syncing and error messages comes up: iTunes could not sync calendars to the iPhone because an error occurred while margin data." I've tried turning the phone off and back on, & tried both USB ports but get the same thing. What can I do next since it doesn't give me even one clue as to what the error would be?

Before I started to resync calendars one by one as suggested in the troubleshooting article, I remembered something that came up in a sync when I first attempted : a 'which one do you want to keep' message about a repeating calendar event, which came up with three options, one from Calendar, and two from iCal on the phone. I deleted that event, then went through the calendar resync one by one, and all seems OK now.
In Music there is a way to find 'ghost' items that show up as grayed-out on the menus, so that you can try to reassociate or delete them. It would be nice to have a similar way to work with Calendar!
Thanks for pointing me to the right article.

Error: There is a problem with the file and it cannot be copied

I've been trying to copy (and essentially move) the contents of an NTFS-formatted external HDD to my iMac's internal HDD so I can then format the external HDD to Mac OS Extended. However, when I simply try to drag and drop, I get an error during the transfer that states:
There is a problem with the file and it cannot be copied.
I tried a basic cp command in Terminal to copy all contents of the external HDD to a folder on my iMac's desktop, and found that while there were no errors, there were many individual files missing full chunks of data (ie. original file would be 4GB on my external HDD, but only 350MB on my desktop).
Any ideas on how I can successfully copy a large amount of data (approx. 170GB) from my external HDD to my internal HDD while avoiding this error, so I can ultimately format my external HDD to Mac OS Extended? ANY help is greatly appreciated.

That's not a good error to see. It indicates something is very wrong. Pulled out of an old programming header file:
ioErr = -36, /*I/O error (bummers)*/
If Apple labelled it "bummers," they had a good reason! Unfortunately, that doesn't bode well for you.
Try running Disk Utility again. Keep repairing over and over until one of two things happens: 1) Disk Utility says no repair was needed, or 2) Disk Utility reports the same error in two sequential repair sessions and is unable to repair it both times.
If you hit the second case, or if you hit the first but still can't copy files, then you've got two basic options:
= Buy a third-party disk utility or two and try them. Try TechTool as a first choice.
= Recover what files you can and write the rest off as gone.
= Send your drive to a data recovery service and hope they can extract more than you can.
Of course, none of this is necessary if you have a backup of the contents of that hard drive. (If you don't, this is your learning experience. Once bitten, twice shy, so they say.) Also, regardless of the outcome, once you've got your data or have decided it's gone, you're going to want to wipe that drive completely clean. Reformat the drive with Disk Utility, then when it's done, select the drive in Disk Utility and hit command-i. (Don't select the new volume you just created on that drive, select the drive itself. Mine looks like "232.9 GB Hitachi ..." with the volume name indented underneath.) Look for an item that says S.M.A.R.T. Status, and if it doesn't say Verified, you might as well throw out the drive. Don't trust any more data to it.
If all appears safe, you can start moving data back onto it. But, as always, make sure you have a backup of everything!

Capture Problem with "escape" command and error message

Similar Messages

Maybe you are looking for