Capture problem with Prem Elements 4

When I capture video from a Sony digital 8 Handycam, it drops part of it. If I capture 30 minutes of video, when I stop capture it only shows the last 8 or so minutes and the first 22 minutes are dropped and can't be found. I can make it work if i capture in 8 minute blocks, but that's a lot of trouble. Opearting system is Windows XP. Any suggestions?

None, other than that it should work. It works fine with my Digital8.
But, without knowing more about your system, camcorder and workflow, it's hard to say what's going on.
Are you sure the time and date was set on the camcorder when that segment was taped? Otherwise, the tape won't have clean timecode.
Is this several scenes or one continuous 30 minute scene with no cuts?
Are you saving these files to your C drive or to another hard drive? Is whatever drive you're saving to formatted as NTFS or FAT32 (which has a file size limitation that can truncate captures)?

Similar Messages

Problem with installing Elements - from noob

I have problems with installing Elements, it gives my an unknown mistake - I already have CS4 up and running, could this be the case?

Chances are not very good that pse 4 will run on os x 10 6.8 unless you were upgrading from an earlier mac version that already had pse 4 installed.
as per this:
http://forums.adobe.com/message/4474236#4474236

Problem with Photoshop Elements Printing

I have been using Photoshop Elements for a couple of years now and know it pretty well. Today while attempting to print, a strange problem came up: After going through the protocol to make a print, just before the image prints PE does a very fast auto correction that basically ruins all the color correction I have made on the image. How do I disable this function?

Hi and thanks for your reply. I checked the settings under "Print", "More Options", then "Color Management" and it only has "Print Space", none of the three options that you said I should have. Am I looking in the wrong place?
Date: Mon, 3 Sep 2012 11:14:57 -0600
From: [email protected]
To: [email protected]
Subject: Problem with Photoshop Elements Printing
    Re: Problem with Photoshop Elements Printing
    created by 99jon in Photoshop Elements - View the full discussion
Check your color management by clicking More Options in the print dialog There are basically three options:1) Printer Manages Color2) Elements Manages color3) No color Management Make sure everything is consistent e.g. if you choose Elements manages color make sure color management is switched off in the print driver.
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4669848#4669848
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4669848#4669848. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Y have problems with Photoshop Elements 12 Bug after reinstallation complet Impossible working ??

Morning !
We have many problems with PHOTOSHOP ELEMENTS 12 ?
After installation on MAC OS X YOSEMITE .
S O S !!

Exporter vers photoshop do you receive any specific error messages? In what way is Photoshop Elements 12 not working?

Problems with Photoshop Elements 11

I have a problem with Photoshop Elements 11, which i bought last week. Installing was completed according the instructions. When I started to use the program my one year old HP-computer with Windows 8.1 informed that there a failure in the Photoshop program and the did not open.

attach a screenshot of the error message.

Capturing Problem with Sony TRV330

Capturing problem with Sony digital8 trv330.
I recently purchased the above camcorder from eBay for capturing old 8mm/Hi8 tapes for editing purpose. The camcorder set to A/V -> DV OUT connected with Firewire to my Power G4 and the Easy Setup was DV-NTSC. The playback on the capture window looks OK except there were no timecode in the Timecode Duration Field and the Current Timecode Field (both shown 00:00:00:00) during playback but there was timedoce in the camcorder viewfinder. When I click the Capture Now button, the capturing window show up with message “waiting for timecode ….”. I have to click “esc” to stop the capturing operation. I trash the Preferences and Ran the Disk Utility without success. I also tried the Easy Setup with DV-NTSC DV Converter as well as DV-NTSC 32Khz, nothing work.
My set up is: Mac Power G4 version 10.5.5/ F.C.E. 4.0.1/ QT7.5.5/ Startup 160 GB-89 GB available/ Scratch 350GB-277GB available. Folks, I need help. Thanks everybody.

Hi, I have a similar problem. I am trying to digitize my 8mm tapes (via firewire) using final cut express (4.0.1). Using easy setup I use DV-NTSC DV Converter and do capture now. I transfer the entire tape but notice the audio is out of synch with the video. This problem gets worse throughout the transfer process. When I use the esc to complete the transfer I get the error " The audio sample rate of one or more of your captured media files does not match the sample rate on your source tape....." So after searching around it is recommended I change the audio sample rate to 32 kHz option. However, when I do this using easy setup and picking DV-NTSC 32kHz I cannot use capture now because I have no timecode and so the window comes up with the message "waiting for timecode". Since there is no timecode this option does not work. Any suggestions? Thanks, Dan

Problem with premiere elements 4.0

i am having
problem
with premiere elements 4.0. it keeps on crashing and when i put pictures on the timeline it comes up black. when i try to preview it either it shows black or sometimes the picture but i cant see it to delete if i wanted to. also it gave me a message something like that adbe is running low on memory and i should be caution

This is aimed at Premiere Pro, but may help
Work through all of the steps (ideas) listed at http://ppro.wikia.com/wiki/Troubleshooting
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section, the questions at the end of the troubleshooting link... most especially the codec used... see Question 1

JDeveloper Extension Problem with Navigator Elements

Hi,
I have a problem with the elements of the JDev Navigator.
At IDE startup I want to set an overlay for the elements on the active project.
This function is implemented in the Subversion Extension too.
How can I access the elements of an active project in the navigator?
It is not a problem to set an overlay with the ContextMenuListener.
Thank you for your help.
Greetings,
Benjamin Oelenberg

Please take a look at the Extension SDK sample projects. There is a sample that does exactly this.
Install the Extension SDK from the Help --> Check for Updates dialog and after restart, say yes to installing the sample projects.

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, howev

I recently upgraded our iMac to Yosemite OS and now have a problem with Photoshop Elements 11: the move tool selects an image or text layer, but then I try to drag the selection somewhere else on the page and it snaps back to the original location, however the arrows will move it OK. Also I cannot drag the selection to another photo in the photo bin as before.

Hi,
Please refer: http://helpx.adobe.com/photoshop-elements/kb/pse-stops-responding-yosemite.html
Thanks,
Anwesha

Problems with ps elements 10 on imac

hi,
i just downloaded the programm yesterday from the app store onto my imac. i want to use it as an extention to my aperture 3.
I have the following questions/problems:
+ starting the programm takes at least 2 minutes, is this normal? I use an Imac Quadcore I7 with 12 gb onboard
+ the preferences: i can only extend the used memory up to 3gb, although i have 12 gb on board?
+ I can not store the preferences, when I shut the programm down, it tells me I do not have the legitimation to store the preferences?!
+ panorama foto work is mostly running out of memory?! 12gb on board
Please can anybody help me?
Thanks
mikle

No, it does not work on the other account. Problem is still/again the same. In the new account it works perfekt.
Von meinem iPad gesendet
Am 08.01.2012 um 22:16 schrieb "Barbara B." <[email protected]>:
Re: problems with ps elements 10 on imac
created by Barbara B. in Photoshop Elements - View the full discussion
If it works in the new account it should hopefully work in your other account, so just log out of that one and go back to the old one and see if it does.
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4125222#4125222
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4125222#4125222. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Photoshop Elements by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem with align element.

Hi everybody,
i have a problem with align element on my page. I explain:
i have used into a panel page a panel group to align my element horizontal, but when i set the vertical-align on top, the element are align in middle.
Now is......
text text text text text text
text text text text text text
text text text text text text
text text text text text text tablelayout
text text text text text text
text text text text text text
text text text text text text
But i wont........
text text text text text text tablelayout
text text text text text text
text text text text text text
text text text text text text
text text text text text text
text text text text text text
text text text text text text
Thanks.

Have you tried using a panelHorizontal instead of a panelGroup?
The components are automatically laid out horizontally and it has a Valign property that you can set to top.

[svn] 3216: Fix for MXMLG-228, a visibility problem with graphic elements.

Revision: 3216
Author: [email protected]
Date: 2008-09-15 18:13:11 -0700 (Mon, 15 Sep 2008)
Log Message:
Fix for MXMLG-228, a visibility problem with graphic elements. This is a quick fix that may force extra display objects when toggling visibility. We should investigate alternate solutions if performance is a problem.
Bugs: MXMLG-228
Reviewer: Deepa
QA: Please check for performance problems when toggling visibility of a large number of graphic elements.
Ticket Links:
http://bugs.adobe.com/jira/browse/MXMLG-228
http://bugs.adobe.com/jira/browse/MXMLG-228
Modified Paths:
flex/sdk/trunk/frameworks/projects/flex4/src/flex/graphics/graphicsClasses/GraphicElement .as

Hello Antonio;
After many, many test I discovered that the problem, at least in my case it is caused by the new ACR 4.5. Please read the Thread that I post under Camera Raw. I include the link below.
I also open two Bug Reports about this, but as usual Adobe (and other Software Companies) will never take responsability for this, until one day they release a new version with "enhancements".
PSE6 Organizer Crash with ACR 4.5 (Vista Only?)
http://www.adobeforums.com/webx/.3bb6a869.59b60d3e

User Account Control Problems with Premier Elements 7 32 bit in 64 Bit Windows 7

I found User Account Control Problems in other forums but didn't see much in Premiere Elements, so I hope this helps others who may be having problems with 32 bit programs in a 64 bit computor. When I first got my 64 bit I didn't have problems.
Back in February I bought a Quad Core Desktop with Windows 7 64 bit. Haven't been on the forum for 7 months since I wrote in regarding importing video with the Pyro AV Link (Premiere Elements Tips and Tricks). I was having problems importing video which started after March 28 sometime, as that was the last time I didn't have a problem importing VHS. Took me a few months off and on to find out what worked.
I started uninstalling Windows updates and any programs I had installed back to that point in time. Checked after uninstalling each item. The capture screen would come up on a delayed basis but clicking on capture did nothing. Although no driver is required for IE1394 (so they say) I read where some people using the Legacy driver had fixed some problems, so I switched to the Legacy. Seemed to work great (for a few minutes).
I had even uninstalled and reinstalled PE7 but no difference. Finally I noticed a shield in the PE7 Desktop icon. Thats weird. Never had that before. Just decided to show up after I had done all of the stuff I mentioned. Turns out at some point in time since I've had the computor Windows 7 decided to flag my 32 bit program as misusing the 64 bit system. User Account Control. I never bothered too much with UAC and just clicked on the yes box wen it popped up asking if I wanted this or that to take control of my computor. I tried using the minimum setting for safety reasons, and then finally turned User Account Control off. Bingo! PE7 capture works again and still working.
While I am not recommending that people arbitrarily turn UAC off, this appeared to be my problem. I would recommed that they try turning it off before uninstallin a bunch of stuff. Having a restore point may or may not have been a fix for me. I think one of the Windows Updates caused the problem but I am not going to uninstall any more stuff at this point, I have not been back on the internet or installed any more updates in my desktop. I am going to use my laptop for internet and used the desktop for video.
I am guessing this could be a problem for any 64 bit systems trying to use 32 bit programs. IE: XP,Vista,Windows 7 64 bit. In Vista there is also Data Execution Prevention (DEP) which you can turn on or off, supposedly to prevent misuse of memory (as I understand it), but Win7 either doesn't have it or I haven't found where it's located.
Maybe this has been covered in the forum somewhere and I missed reading it. Hope I am not too confusing. Anyway, whatever feedback you guys have would be great.

John,
    Thanks for your answer, and I did check out the link you suggested. However, I have Windows 7 Home Premium as most people have I think, and the XP program was not available. I started with Vista and now have Win 7. I never could navigate around in XP anyway so am content to just leave User Account Control off.
    Interesting side note to turning UAC off is that my desktop seemed to be using more of the CPUs, where half of them were "Parked" as I wrote in also about 7 months ago when I 1st got my desktop. I am pleased to say that video processing seems to go quicker with UAC off. Have to observe things some more to confirm.
    I just thought if others were having problems after installing Windows Updates and leaving UAC off worked then they could possibly pinpoint a problem.

Capture content with markup element

Hi All,
I struck with capturing the content with markuptag within that content.
For Eg;
<p> xxxx<i>ssdf</i>sdfasdfas<b>sdfasdfas</b>asfdgsadfasd</p>
Here i want to capture the contents of Element "p" with the markuptags "i, /i, b, /b"
I am using the statement like
var myString = myXMLElement.texts.item(0).contents;
Pls. help me out to find a solution for this.
regards,
Suresh

Hi, I know that I´m a kind of late in this discussion, but I faced a similar problem exactly in now days and in a way to show my grateful to this specific forum conversation that gave me the light I was needing, I want to share my solution here.
My Problem:
I have a customizable "Help" text that could be seen in some pages of the application. It is edit from a special Help Management page throw a Rich Text Editor and it is related to the corresponding page. When the final user opens the specific page, the text has to be shown as it was edited in the Rich Text Editor.
My solution came in this way:
*1. Create the Shortcut: "Help_Text"*
DECLARE
CURSOR C_Help IS
select Concat(Concat('<div class="textRegion">',Help_Text),'</div>')
from Help_by_Page_Table
where app_id = :app_id
and page_id = :app_page_id;
vHelp_Text CLOB;
BEGIN
OPEN C_Help;
FETCH C_Help INTO vAyuda_Rapida;
CLOSE C_Help;
RETURN vHelp_Text;
END;
*2. In the desire page: Create a HTML Region(with shorcuts)*
Region_Source:"Help_Text"
*3. Job is done!*
I just have to add that I´m using the Standard Theme: Productivity Applications, the class "textRegion" is part of the classes defined in this theme.
Edited by: Gustavo Bustos on Feb 27, 2013 12:21 PM
Edited by: Gustavo Bustos on Feb 27, 2013 12:25 PM

I have elements 11 and I did the 30 day trial of elements 12. When the trial expired it caused problems with my elements 11. Nothing opens correctly, some not at all and I can't get help?

Please help me. I am so disappointed in Adobe. I was planning on upgrading to 12 after the trial period but was unsure still. The problem I am having now is that my PSE 11 Organizer is off the grid. When I right click on a file and go to "open With", it only offers me the option to use Premiere Elements and not Photoshop. I found the .exe@ file for Photoshop Elements 11 and created a shortcut to my task bar in order to get to it. That won't work on my organizer though. Should I just uninstall and reinstall the whole thing? I'm on Windows 8.1. I refuse to upgrade to 12 after being refused any support considering it was the trial they encouraged me to try that caused my problem.If I have to reinstall everything with it impact the projects I've created?

wesb
What computer operating system is involved in the Premiere Elements 11 and 13 issues? Same computer or different ones? Are you installing from purchased download installation files or from purchased installation disc? Does Premiere Elements 11 work completely on this computer whereas 13 will not?
Let us go through the typical drill so as to take nothing for granted.
1. Does the problem exist with or without the antivirus and firewall(s) disabled? Are you working with an individual home computer or in a
school or company network?
2. Are you running the program as Administrator and is there any "domain" account involved?
3. Is your video card/graphics card up to date according to the web site of the manufacturer of the card?
4. Do you have the latest version of QuickTime installed on the computer with Premiere Elements?
Let us start by ruling in or out any of the above, and then we can decide what next.
Any questions or need clarification, please do not hesitate to ask.
Thank you.
ATR

Capture problem with Prem Elements 4

Similar Messages

Maybe you are looking for