Capture R3 Message V1/150

Hi,
We are using the SAP E-Commerce 7.0/ECC landscape.
We are trying to capture R3 Message V1/150 and display a custom text on the UI.
We have done the following modifications:
1.     Extended the backend object OrderR3
2.     Extended the backend object ReadStrategyR3
3.     Maintained the entry in backendobject-config.xml
4.     Also overridden the method replaceR3MessageTexts
It seems that OrderR3 is not getting called at all in the framework, though it is maintained in backendobject-config.xml.
Does the above mentioned approach is supported by SAP E-commerce 7.0 framework ?
If yes then what else needs to be done.
Best regards,
Rohit Sharma

Hi Mark,
I refered to SAPNote - 641132. I have changes the className for the Business Object 'Order'
I couldnt find any entry for OrderR3 in the existing version of config.xml.
I have changed the class name for OrderR3 by my customised one.
Is it necessary to make any changes to config.xml.
if yes then where exactly do i need to make the change.
Please give a detailed answer.
Thanks in anticipation !
Best regards,
Rohit Sharma

Similar Messages

Exception ERROR_MESSAGE in FM - Capture Success message

Hai Experts,
We all know that we have Exceptions in Function Modules.
If we call a FM using Pattern button in the Editor it gives all the Importing, Exporting.. and Exceptions. If the FM gives an Error or Abort message (MESSAGE TYPE 'E' or 'A') using MESSAGE keyword, we can capture this message using Exception ERROR_MESSAGE instead of message displayed as a pop up.The Addition ERROR_MESSAGE can be added manually to Exceptions after calling the FM using Pattern button.
My requirement is, using ERROR_MESSAGE we can capture only type 'A' and type 'E' kind of messages. The remaining types (S, I and W) are written to the Application Log(The help documentation says about this point - just check out). I just want to read these messages from the Log or some other means.
How could I get these messages ?
To brief the scenario, what I want is, if the FM runs successfully (without any errors) how could I get the messages (type S, I and W) if I am using Addition ERROR_MESSAGE.
I tried this scenario, but could not see any log using TCodes SLG1 or SM21 (if I am not wrong) after I ran the FM successfully. There are also some FMs to read the logs, but they were not helpful.
Thanks in Advance....
Shashidhar

Raj,
If I am using a Standard FM in which an Information message pops up, then to suppress this pop up we can add ERROR_MESSAGE to EXCEPTIONS. I am running this in Foreground.
I question is, how could I read this pop up message info after calling the FM, i.e. I just do not want a pop-up, instead I want to read this info message without pop-up.
I think you get it. Correct me, if I am wrong.
Thanks for your reply,
Shashidhar

What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Hi,
i am connecting a Bluetooth device to my laptop. I notice that Message Analyzer could capture Bluetooth messages only if I am using windows 8? I am using window 7. What driver or software patches do i need to install in my windows 7 laptop, in order for
the laptop to capture Bluetooth messages, which is possible with window 8?
Also, i notice that using window 8, i am able to capture Bluetooth message but i am not able to display wireless perfromance statistics such as signal strength, throughput, etc? Is there a way for me to get such information.
Please help.

If you look at the link you sent me:Default Trace Scenarios
http://msdn.microsoft.com/en-us/library/jj659262.aspx
"Windows 8 Bluetooth (Windows 8/Windows Server 2012 or later)
Troubleshoot Bluetooth issues"
So what about Windows 8 earlier? Not supported?
My question: What driver or software patches do i need to install in my windows 7 laptop, in order for the laptop to capture Bluetooth messages, which is possible with window 8?

Facing problem while capturing error messages in ME51N

Hi Experts,
In ME51N transaction, we have included custom fields and tried to capture Error messages by building ex_message.
Below is the code that we used:
         loop at tb_error into wa_error.
            wa_message-type   = WA_ERROR-TYPE.
            wa_message-id     = c_zpr.
            wa_message-number = '007'.
             wa_message-message    = wa_error-message.
          wa_message-message_v1 = WA_ERROR-MESSAGE.
            wa_message-message_v2 = wa_eban1-bnfpo.
            APPEND WA_MESSAGE TO EX_MESSAGES.
            CLEAR WA_ERROR.
          endloop.
In my message class we have not hardcoded the messages because we need to capture dynamic messages(In message class it is 007: & & ). For that we have passed message text in wa_message-message.
But when Check button is selected, we are not the desired error message.
But if we pass the same message in Message_v1, we are getting the error message but it is getting truncated as the size is small when compared to Message field.
Waiting for your response.
Thanks & Regards,
Amarnath

Looks like configuration prob.
Have you tried jms examples of weblogic ? you may need to re-configure your server setup, to create example server.

CcBPM, how to capture error message in the exception branch ?

Hi,
Can I capture error message in the exception branch ? how to do that ?
because i want to raise the alert including with the error message ?
Cheers
Fernand

Hello Fernand,
I hope at the end of this you may get some knowledge on Alerts.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step XI:Alerts step-by-step. (fundamental Basic)
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i CCMS Monitoring for XI. (CCMS monitoring for XI is enough later
we configure to Adapter Engine).
/people/aravindh.prasanna/blog/2005/12/23/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part--1 Configuring scenario specific E-mail alerts in XI-CCMS: Part-1
(This is Important)
/people/aravindh.prasanna/blog/2005/12/24/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-2 Configuring scenario specific E-mail alerts in XI-CCMS: Part-2
/people/aravindh.prasanna/blog/2006/02/20/configuring-scenario-specific-e-mail-alerts-in-xi-ccms-part-3 Configuring scenario specific E-mail alerts in XI-CCMS: Part 3
/people/federico.babelis2/blog/2006/05/03/solution-manager-cen-and-alerting-configuration-guide-for-dummies Solution Manager CEN and Alerting configuration (Advanced)
Please reward points if it is useful...
Thanks,
Satya Kumar

I am receiving an error message "Error: 150:30" after having my computer serviced. Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1. tried to download a Licensing update, but can't get that to open.????

Adobe Photoshop CS4
I am receiving an error message "Error: 150:30" after having my computer serviced.
Repair shop completely stripped down my machine and reloaded Operating system, Yosemite 10.10.1.
I tried to download a Licensing update, but can't get that to open.????
My machine had originally been a clone of another Mac. Not it looks like a brand new computer.
Possibly there is something in system preferences to change? I turned off Firewall and allow downloads from all parties.
Thank You for you help!
joe

150:30 means the licensing failed. Photoshop can't be moved like other programs from another drive or from backup.
I would suggest a reinstall to fix it. Anytime you move Photoshop from from drive to another, it breaks licensing. A install is the quickest way. to fix it.
When you are done with the install, apply all CS4 updates. Product updates
Gene
(Remember to mark the answer that solved your issue by clicking on “correct”. This indicates the question is answered and credits those who took time to help you or followup if there are further questions)

Capture a message

Hello guru's,
I have the following problem:
I have a BPM where I do a sync call to a partner. My abstract Message Interface sends out ORDERS05 IDOC and needs to Receive a ORDRSP05 IDOC. Now I get back a different kind of message, it is an error message. So If i look in my moni I see at Response Message a message with a different format.
Now I want to capture that message and do some mapping with it. So I created a switch which determines if the response is an IDOC or not. If not then I wanted to do some other mapping, but this doesn't work, I get the message: no payload found.
How can I do mappings with the response message which is different than ORDRSP05? Is it possible?
Best regards,
Guido

When you are getting this different message, was there any error reported by system? I meant any exception raised? In such case you can use and exception handler for mapping this new message in error mapping.
But as you said, does the error has any XI SOAP strucuture which is understood by XI? Then only you would be able to put a mapping for this.
VJ

Error Message "Error: 150:30"

I opened Photoshop, clicked Edit, and get the following error message: "Error: 150:30". I tried to restart my computer but it didn't work. Any ideas?

Please refer:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac- os.html
Regards,
Ashutosh

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped

I work with a Mac & I had to restore my computer for my time machine back-up. When I attempt to open/edit a photo with either camera raw or photoshop I get the following error message: Error 150:30 , it also sys that licensing for the product has stopped working?

Unfortunately when Adobe products are restored from backup, especial CS4 and especially Mac, it breaks licensing.
There is a python script included in the license recovery kit that should work if you are familiar with Terminal.
If not, you must reinstall your CS4 suite. You don't need to delete your preferences, so it should be the same as before.
Error "Licensing has stopped working" | Mac OS
Gene

I am receiving an error message: Error: 150:30. What's wrong?

Why am I receiving error message Error:150:30?

Hi [email protected]
Please refer the following troubleshooting document and perform the steps given.
Windows:
http://helpx.adobe.com/creative-suite/kb/error-licensing-stopped-windows.html
Mac:
http://helpx.adobe.com/x-productkb/global/error-licensing-stopped-mac-os.html
Hope this helps.
Please let me know if still facing the issue.
Regards,
Sumit Singh

I change my computer. Now Photoshop element send this message erreur:150:30. How can I fix it?

I change my computer. Now Photoshop element send this message erreur:150:30. How can I fix it?

duplicate post, see:
my computer(mac) was broken, I buy a new one. Photoshop element (buyed on ligne from adobe) does not want to open now.

How to capture ALV messages(popup window) in BDC...

Hello Experts,
I am currently doing a recording for transaction ABT1(Intercompany asset transfer)
and I noticed that messages are displayed via ALV popup if you post it. The messages
contain the posting information(what company it is posted, document number, etc)
Now, is there a way to capture those messages? because I noticed that it is not captured
in my recording so I have no way of knowing if it was successfully posted or not.
Also, is there a way to supress transaction/status messages in a transaction?(E.g. posting
will take place in an earlier fiscal year, etc)
Hope you can help me guys. Thank you and take care!

Hi,
have a look at fm 'AMDP_MESSAGE_SEND'.
it is used in transaction ABT1.
you can as well use this:
CALL FUNCTION 'MESSAGES_INITIALIZE'.
LOOP AT it_return_bapi.
    CALL FUNCTION 'MESSAGE_STORE'
         EXPORTING
              arbgb                   = it_return_bapi-id
              exception_if_not_active = ' '
              msgty                   = it_return_bapi-type
              msgv1                   = it_return_bapi-message_v1
              msgv2                   = it_return_bapi-message_v2
              msgv3                   = it_return_bapi-message_v3
              msgv4                   = it_return_bapi-message_v4
              txtnr                   = it_return_bapi-number
              zeile                   = ' '
         EXCEPTIONS
              message_type_not_valid = 1
              not_active              = 2
              OTHERS                  = 3.
ENDLOOP.
CALL FUNCTION 'MESSAGES_STOP'
       EXCEPTIONS
            a_message = 04
            e_message = 03
            i_message = 02
            w_message = 01.
IF NOT sy-subrc IS INITIAL.
    CALL FUNCTION 'MESSAGES_SHOW'
         EXPORTING
              i_use_grid         = 'X'
              i_amodal_window    = i_amod_window
         EXCEPTIONS
              inconsistent_range = 1
              no_messages        = 2
              OTHERS             = 3.
ENDIF.
Best regards
Edited by: pablo casamayor on Jun 23, 2008 8:31 AM

I want to capture system message during data upload.

Hello,
I want to capture system message during data upload.
How should I do this?
suppose during call transaction system shows message:-
" Info record for vendor 102925 and material DYND80000 does not exist"
then How can I get that message?

Hi Megha,
CALL TRANSACTION tcode USING i_bdcdata
 MODE lws_mode
 UPDATE lws_update
 MESSAGES INTO i_messages.
CLEAR wa_error.
IF sy-subrc NE 0.
 cnt_failed = cnt_failed + 1.
 wa_error-status = c_fail.
 LOOP AT i_messages . "WHERE msgtyp EQ 'E' OR msgtyp = 'A'.
 flg_fail = c_x.
*---Calling FM to get for Error Message Text
 CALL FUNCTION 'MESSAGE_PREPARE' "#EC *
 EXPORTING
 language = 'E'
 msg_id = i_messages-msgid
 msg_no = i_messages-msgnr
 IMPORTING
 msg_text = lws_text
 EXCEPTIONS
 function_not_completed = 1 " Invalid Date Error Description
 message_not_found = 2
 OTHERS = 3.
Reward points if this helps.
Manish

Xtra: trouble capturing windows message

We are trying to use the RegisterNotificationClient in an
Xtra to capture couple windows messages from an external DLL.
I basically have two questions:
1. Is using RegisterNotificationClient the right way to
capture windows messages from an xtra?
2. If the answer to 1 is yes, then I have another question as
when we try to set up the parameters for the
RegisterNotificationClient I have a misstmatch in the nid, second
parameter to specify the id of the message to be captured. I have
for windows an integer constant, but the nid param expects a GUID
number ...
Thanks!

Thanks for the reply Tom. (BTW I'm not the original poster.)
You are correct- It is a USB drive formatted FAT 32 . After my original post, I erased the drive and started over with a clean slate. This was successful for tape one (about 60 minutes). About twenty minutes into tape two though, it was deja vu all over again. FC froze, I force quit, and lost all of what I had captured from tape one in the process. I unsuccessfully tried to recapture tape one. Same problem again.
Although this is the first time I've tried to capture through FC onto an external drive, I've got three other USB drives full of video I've captured from VHS with the same computer through a DV encoder. When you say USB is not supported by Apple for video applications, does that mean video editing applications? As for complete information, apologies but I'm not exactly sure what other info. you mean. Please let me know. Thanks again. I appreciate the time.

How to capture error messages for BCP when running through XP_CMDSHELL

XP_cmdshell returns 0 as success when running BCP that causes insertion failure for any records (failure because of truncation, data type mismatch etc.)
One way is to capture output message in temp table and can parse the messages. but I am looking for some direct methods.

Hi Naveen Raikwar,
We can use insert/execute syntax to insert error output to a file, here is a good article, please see:
http://www.sqlservercentral.com/articles/Error+Handling/69196/
And here is a similar thread, please refer to:
http://social.msdn.microsoft.com/Forums/en-US/sqltools/thread/b37ec1fd-ea2f-4546-93c1-8bb9d589710d
Thanks,
Eileen
Eileen Zhao
TechNet Community Support

Capture R3 Message V1/150

Similar Messages

Maybe you are looking for