Capture Serial Numbers

All,
I'm currently doing an inventory of all my DMP's in production. Is there a way to capture the S/N's without having to go out to the device? I use DMP 4400 Series. Thanks

Hi Thomas,
This was answered a few times already in the past (see for example https://supportforums.cisco.com/thread/2086623).
Unfortunately, the short answer is no.
Regards
Daniel

Similar Messages

Capturing serial numbers in 2D barcode format

Hi All,
I'm working on capturing serial numbers in 2D barcode format using RF unit but it only taking 11 serial numbers from 30 serial numbers in 2D barcode. Is there any limitation on number of characters that system can take at one time?
Regards,
Sekhar

Hi,
what is the path level of your sap console. if you are using the old one the maximum is 231. check in market place and update. it can accept up to 1024.
regards
sai

Need config steps to use LM80 transaction to capture serial numbers

Hi,
Our shipping process is:
1. Create delivery (This automatically creates a TO)
2. Confirm TO
3. PGI
If the material is serialized, capturing the serial numbers via VL02N > Extras and then do PGI.
But due to limitation of scanning only 19 serial numbers at a time in VL02N transaction, have to keep scrolling manually to scan more than 19 serial numbers, we want to use LM80 transaction to capture serial numbers.
I need step by step configuration changes and processing steps to use LM80 transaction. As a note, we do scan serial numbers in to system as our business requires scanning 100 serial numbers at times.
Thanks in advance.
-Sri

Hello Alexander,
Firstly, considering the first and last serial numbers and filling in the rest is good. But the challenges will be as follows:
1. What happens if the difference between the first and last is too huge? The user will see a huge list of numbers.
2. What if some in-between serial numbers are consumed already?
One probable solution can be:
1. The system suggests the unconsumed serial numbers for picking based on the actual quantity that has to be picked.
2. The user can either choose these serial numbers or modify the list with scanning based on actual picks.
The solutions can be many based on the actual way the materials are organized in the warehouse.
Regards,
Dilip
http://www.indience.com (Enterprise Mobile Company)

SAPConsole - RF Tx: (LM80) Capture serial numbers, how to deal with ranges?

Hello All,
I was wondering if maybe some of you have come across the following challenge and have already found a solution.
At my customer we are implementing R/3 warehouse management (LE-WM). We are going to implement handheld devices for the order pickers to enable them to pick using transport orders (T.O.).
Some of the materials they will pick have serial numbers and need to be registrated after the T.O. has been completed using transaction LM80
As the people will sometimes pick in bulk it is required that they should be able to scan the first and last serial number of a complete range and let the system fill in the blanks.
This is to save time and to be nice to the warehouse people. They would only need to scan 2 times instead of 50 times if they pick a whole pallet.
I would like to know if any of you have already come across this and how you handled this.
Kind regards,
Alexander

Hello Alexander,
Firstly, considering the first and last serial numbers and filling in the rest is good. But the challenges will be as follows:
1. What happens if the difference between the first and last is too huge? The user will see a huge list of numbers.
2. What if some in-between serial numbers are consumed already?
One probable solution can be:
1. The system suggests the unconsumed serial numbers for picking based on the actual quantity that has to be picked.
2. The user can either choose these serial numbers or modify the list with scanning based on actual picks.
The solutions can be many based on the actual way the materials are organized in the warehouse.
Regards,
Dilip
http://www.indience.com (Enterprise Mobile Company)

RF Transaction - Capture Serial Number

Hello Experts,
I have a scenario where the client wants to
capture the serial numbers during the picking?
capture the serial numbers during the goods issue?
is there any standard RF transactions in ECC 6.0 for capturing serial numbers while picking and GI process? or do we need customization? Please explain.
Can we print the serial numbers in packing slip and invoice??
Thanks,
Sen

Hello Sen,
SAP has included this functionality "Capturing serial numbder during picking" from ERP ECC 5.0 onwords.
LM80 is the standard RF transaction code for capturing serial number.
<b>Can we print the serial numbers in packing slip and invoice??</b>
Yes, you can print the serail number in packing slip and invoice, work with developer on this. For accurate information on this, post query in SD forum as well.
Regards,
Arif Mansuri

Can we capture two types of Serial Numbers for a material?

Hi,
I have scenario where i need to capture two different types of serial numbers for a material. This scenario is very similar to the below one -
Say if a CAR is a serialized material, then i want to capture engine no. and chasis no. for each car.
I know in standard serial number management, we can capture one kind of serial no. for an item, but can we capture two types of serial number for an item? If yes, how we can do that?
Please help.
Thanks,
Parimal.

Hi,
No it is not possible to have two serial numbers for a material.
The main attribute of a serial number is that it is UNIQUE.
You can better have the vehicle number as the required serial number and the other numbers under the Manufacturer data of the General data tab of the IQ01 transaction. ( Equipment master creation ).
You can better change the name of the manufacturer data such as Model number to Engine numeber and Manu serial no to Chasis no etc.., using CMOD transactions.
Regards

Unable to capture serial number in migo!

dear all,
i want to capture the serial numbers that i gave in MIGO transaction befor i save it to do some validation.
i have tried with mb_migo_document badi but the serial numbers are not captured.
is there any other way to capture serail numbers before i save the migo document?

hi,
check these badi.
MB_MIGO_ITEM_BADI BAdI in MIGO for Changing Item Data
MB_MIGO_BADI BAdI in MIGO for External Detail Subscreens

Serial numbers in handling unit

We generate handling units at the end of production line; the requirement is to capture and store the serial numbers into the handling unit (which works fine) and when the u201Csameu201D handling units are picked for outbound deliveries, the serial numbers are carried along with handling unit created during production which is not working, the system is currently requesting to key in all the serial numbers again during PGI. Can you please let me know how to resolve this issue? Thanks in advance

Hi,
In case of partial HU picking only system will ask serial numbers for HU.
Eg: HU qty - 10pc T.O qty :4pc then system asks which serial no's want to pick from HU.
If it is full HU no need to give serial numbers manually..
Rgds,
Kris.

HT4865 When using. " find my iPhone". It uses the apple ID. Anybody can reset any device ( automatically resetting the apple iD as well . Thus turning the device as if was bought brand new or was given to somebody as a gift. Serial numbers can't be res

Why can't we track serial numbers and not the apple iD. Since serial numbers can't be reset or erased. ?

Unfortunately it is in both Apple's and your carrier's economic interest to not provide such a feature. One would think that with all the technological capabilities that apple has provided us with that they would be able to do this as well. That's the point here, they are able to do it, probably quite easily; but it's economically beneficial to them if they don't. Remember, Apple doesn't provide the find my iPhone app as a pre-downloaded application, you have to do so yourself. One may say this is for privacy reasons, but there are clearly other reasons as well. So, Apple has no incentive to add such a feature unless it becomes an issue (customers demanding it or other companies providing such a feature). Thus as consumers we need to make this an issue that apple must address. I too lost my iPhone. The fact that Apple doesn't provide a feature such as allowing one to "flag" their device as stolen and thereby preventing that device from being unlocked, reset in itunes, or immediately turned into a tracking device when turned on is pretty frustrating and ridiculous. Apple provides very limited functions in their native find my iPhone app, and yet there are many more features it could provide. I'm aware of apps that provide far more capability, such as preventing shut down, taking pictures, taking audio/video recordings, remote backup, photo capture after failed unlock, call log, sms forwarding, and even constant GPS tracking. My point here is this, Apple can easily provide features that would further enable you to recover your apple device but there isn't an incentive to and there is actually economic incentive to not provide such features. We need to provide them with the incentive to do so, or else it is likely to never happen.

For Capital goods in in Detail tab in Part one data Multiple serial numbers

Hi experts,
For capital goods i captured Part 1. Display Vendor excise details in item detail tab in part 1 columns Register,Year, Serial number, material document,year, item, internal number like that are there. In serial numbers four different serial numbers are generated. one is receipts and three is issues.
can anybody answer me why these four serial numbers are generated and three times issues is came. please do needful.
From.
Naveen.

Hi,
The possibilities could be becaz of :
1) Cost Center purchase , system updates QTY as well as Issues at the time of GR.
2) Item without Material Code
Pl. check
rgds,
vikas

Fm PROCESS_HU_INBOUND_DLVRY - no serial numbers added

Dear experts,
I am using function module PROCESS_HU_INBOUND_DLVRY to create and pack HUs in inbound delivery and also add serial numbers as there is appropriate parameter : I_HU_SERIAL_NR.
The first two steps work fine, but NO serial numbers are added to HUs.
Is this a bug in the standard ?
Please help,
Thanks,
Roxani

Hi!
There is not a bug.
In standard SAP, the RF environment, there is no such transaction to serialize via HU.
Please check the following customizing:
Logistic Execution > Shipping > Basic Shipping Functions >Serial Numbers
> Determine serial number profile
Select profile and double click in the serializing procedures.
If it is 03, capture must be done at the HU level and this is not
supported in the mobile transaction LM80.
If it is 01, it is possible to assign serial number at the item level
with LM80
With LM61, you cannot handle the serial number.
In the RF environment, there is no such transaction to serialize via HU.
Thanks,
Milca

Manual Inspection Lot creation using Serial Numbers

Hi,
My requirement is to create inspection Lot for Serialized material manually.There is no trigger like Goods Receipt or Issue. I want to assign Serial number for the inspection lot to record the results. When I check the transaction QA01, I can only create it at Material level. Is there any standard way I can achieve this requirement?
I assigned the Serialized Profile and checked the check box " Serial Number Management Possible" in QM view of material master. Thanks.

Hi Tim,
There is a better way of capturing the Serial Numbers for each result recording by using the Inspection Point in the Inspection Plan.
You may create New Inspection Point in the configuration for the Serial Numbers assignment.
I hope that this will meet your requirement.
Regards,
Bala

DTW Stock with Serial Numbers

Hi all, I DTW'd some stock in through the GRPO template. I then AP'd the invoice. Due to some administrative issues I had to credit the Invoice thus reversing the stock. So the Serial Numbers are all reflecting as unavailable.
I need to re-import the stock with the same serial numbers and different costs. The DTW is giving me an error "(Serial Number) for item (Item Code) in line 1 already exists (in unique field)/Application defined or object defined error65171"
I realise that these serial numbers are already in the system, but if I manually capture these on the GRPO the the application asks me to confirm this already exists. There are almost 2000 items to capture. Please could someone advise if there is possibly a field on the DTW template (purchase delivery) I could populate that overides this error"

Are you using the oInventoryGenEntry templates? The serial numbers template I have contains 3 serial numbers - Internal, Manufacturer & System. The system serial number is the unique key and is system generated.
Try the following to get a list of on hand stock with serial numbers:
{SELECT T0.ItemCode, T0.ItemName,
      T1.WhsCode, CASE WHEN ISNULL(T2.SysSerial,-1) = -1 THEN T1.OnHand ELSE 1 END [Quantity], T0.AvgPrice,
      T2.SysSerial, T2.IntrSerial
FROM OITM T0
      INNER JOIN OITW T1 ON T1.ItemCode = T0.ItemCode
      LEFT OUTER JOIN OSRI T2 ON T2.ItemCode = T1.ItemCode AND T2.WhsCode = T1.WhsCode AND T2.[Status] = 0
WHERE T1.OnHand <> 0    and t0.ManSerNum = 'Y'
ORDER BY T0.ItemCode, T1.WhsCode, T2.SysSerial}
You may need to tweak it a bit for your eviironment.

Serial Numbers on an RFID Tag

I am new to RFID technology. My question is: Can 1 RFID tag be designed to capture and transmit 5 non-consecutive serial numbers contained in 1 container box?
If you can tell me if this is possible with minimum effort or much effort, please let me know.
Then, if you also know Oracle's e-Business Suite (EBS), let me know if it's possible to have the scanning of such an RFID tag with 5 non-consecutive serial numbers populate the Serial Numbers form in EBS like on a shipping transaction.

Thanks, Sam.
The EBS modules would be Inventory and Shipping. We do not use WMS.
Uh, I do not know 'edge'. We do not use RFID currently and our volumes are small.
Here's the business issue, whether the solution is RFID or not: Our company makes lasers for fiber optics. Originally, we just made high-end lasers (low volume, high dollar) that were placed into individual container boxes with a barcode label with its single serial number on the outside. All of these lasers were serialized as finished goods in Oracle. Whenever we ship such a laser, we have someone scan the picked lasers manually with a barcode reader one container box at a time. This has not been an issue, since volumes are small.
But now we sell low-end lasers (higher volume, lower dollar), which often are sold in containers of 5. Each of the 5 small lasers have an individual, non-consecutive serial number. Our business areas want these items serialized in Oracle EBS as well, even though it makes more sense to me to track these items by LOT NUMBERS, not individual SERIAL NUMBERS.
The dilemma is: When we ship, let's say, 1000 of these small lasers by picking 200 multi-pack containers, how do we have the shipping guy scan in the 1000 serial numbers?
One way is to print 5 small individual S/N barcode labels on the multi-pack container, then have the poor guy scan in 1000 S/N's into the Oracle Shipping form from the 200 containers.
That's why I was asking if there could be an easy RFID solution. Perhaps log the 5 S/N's in the multi-pack container onto 1 RFID tag. Then have the guy scan the RFID tag and have it insert the 5 S/N's onto the Shipping S/N form, one S/N at a time with a tab entry to go to the next S/N line. That way, the guy only scans 200 RFID tags. Is this crazy (not possible)?

Creating Serial Numbers within Repeating Groups

I am trying to have Serial Numbers within Repeating Groups. The situation is that there are no Serial number field within that table (in the DB) to handle such a request. Can someone guide me as I am a newbie to BI Publisher.
The Link to the image is [http://s833.beta.photobucket.com/user/fareed_xtreme/media/Capture-3.png.html]

where are many commands from xslt
http://bipconsulting.blogspot.ru/2009/03/xslt-for-bi-publisher.html
https://blogs.oracle.com/ocsbip/entry/xslxsltxpathxslfo_part_1
http://docs.oracle.com/cd/E23943_01/bi.1111/e22254/extend_func.htm#CIHECHJG
and so on ....

Capture Serial Numbers

Similar Messages

Maybe you are looking for