Capture stops when physical camcorder tape ends; but buffer not saved

I'm trying to capture a ~50 minute HDV video from my Sony HC3 camcorder. The capture screen indicates the video displayed on the screen is behind the camcorder and that you should view the camcorder to monitor the video. I assume that means it is pulling if off of the camcorder faster than it can write it to the harddrive, thus it has to buffer it in memory.
The problem is, it seems like when the physical end of the tape is reached, any video this is still buffered is lost. I've tried it twice and both times approximately the same amount of video makes it to the harddrive. Everything buffered after that is lost. The second time I even tried it with the "abort capture on dropped frames" option turned off.
I know I only have a little eMac, but I have 1gig of memory and plenty of harddrive space left (at least 50 gig) on my internal drive.
Any suggestions?
thanks,

What happens if you stop the tape just before the end rather than letting it run out by itself?
Al

Similar Messages

  • When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    When recording voiceovers, I click the stop recording button at the end, but I can't figure out how to get rid of the "click" sound before I send off the recording!

    njordan wrote:
    I can't figure out how to get rid of the "click" sound before I send off the recording!
    drag the BottomRight edge of the region to the left, past the unwanted sound

  • Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?

    Before removing iPhoto (latest update crashed the app), I accidently removed it from my purchased Apps from the App Store. I accept iPhoto when I search for it, but does not put it back in my list. How do I get this back so that I can reinstall iPhoto?
    Thank you.

    I found the answer just after posted this.  Thanks to a user named CloudWalker.  Solution is to go in AppStore, View Account under "Store" Menu and unhide any purchases.

  • I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I have a factory unlock iphone 5 with the lasted version. Since yesterday my sim card stopped working and now says `No Sim`, was working fine and stopped working now, other sim works but just not mine. ¿What can be happening?

    I thought that, but I put the sim card in another device that is not Apple and works. Definitely the sim card work, but no longer in my iPhone 5 or maybe in any other Apple device, i dont know why!! But i gonna get a replacement to see what happen

  • When I take a picture it is not saved in photo app

    Hello,
    I just bought a new IP4 and when I take a picture it is not saved in my camera roll folder (which doesn't exsist by the way).
    Same problem for the videos. I can record one but I cannot have a look at it because it is not saved in the PHOTOS app.
    Can someone help me out?
    Regards,
    Greg

    Hi there christinefromsafety harbor,
    You may want to try force closing all open apps and resetting the device as an initial troubleshooting step. Take a look at the articles below for more information.
    iOS: Force an app to close
    http://support.apple.com/kb/ht5137
    Turn your iOS device off and on (restart) and reset
    http://support.apple.com/kb/ht1430
    -Griff W.

  • HT4623 my phon when i double tap, my apps do not jiggle and i can not remove my open ones

    downladed to io7, and now when i double tap to close, my open apps, they do not jiggle and i can not x them out

    Force closing apps changed in iOS 7.
    Reading the User's Guide would have revealed this.
    Double tap the home button to bring up the multi-tasking bar.
    Swipe UP on the card to force close the app.

  • Why does my Iphone 5 ring when I get a call, but can not figure out why there is NO sound when I get a text?

    Why does my Iphone 5 ring when I get a call, but can't not figure out why it does not make a sound, when I receive a text or typing???

    Deborah,
    The solutions on here did not work for me.   I tried.....
    I have the same problem with a BRAND NEW iPhone 5c version 7.1- no sound when a text message arrives.
    (1) I have "do not disturb" scheduled correctly.   No partial moon on the main screen near the time and battery indicator.
    (2) I have the ringer icon correct with no slash.    Yes I turned the hardward mute switch to the UP position (ie the one above the + and - buttons on the left side.   I tried messaging with the bell as shown and bell with a slash and neither work.   The mute switch is not red (switch above the + volume hardware switch)     I enabled some assistant using the Settings menu.    And I press the dot (looks like a target symbol) and go to Devices and I can see what position the bell is in....either a bell with a slash or no slash.
    (3) Yes ringtones are configured for text and other. I can hear them when I am under settings > sounds.   But they do not link with the actual hardware.
    (4) I rebooted the iPhone 5c by using the button at top, slide the red bar, then pressed it again, apple came up for a minute and it seemed to be back up.
    (5) I upgraded the IPhone 5c from 7.0.4 to 7.1 using my pc and itunes.   And the upgrade was successful but did not fix the text issue.
    (6) I do not have it in airplane mode or silent mode.
    (7) I reset all settings using Setttings > General > reset > reset all settings .  this wipes settings but not data and media.
    This is really frustrating.

  • Using the "star" to bookmark a page but is not saving it to bookmarks??

    I click on the star to bookmark a page but when I go to find it under Bookmarks it is not there. It does show under "recent bookmarks" in the drop down menu but is not in my permanent bookmarks??
    This just started happening after I updated Firefox to 29.0.1 - it was not doing this before and worked fine.
    Windows 8
    Please help!

    * If you click the ★ Star Icon once, the bookmark ends up in the Unsorted Bookmarks folder.
    * If you double-click the ★ Star Icon, you get to pick where to place the bookmark.
    * If you press Ctrl+D (Mac: Command+D), the bookmark ends up in the Bookmarks Menu folder and you get to pick where to place it.
    The following add-on makes bookmarking easier in various ways. Among other things, it's able to remember the last used folder.
    * https://addons.mozilla.org/firefox/addon/add-bookmark-here-2/

  • Video capture stops when connected to FCP using fire wire

    Captured video using Sony VX2000 using 48 khz and 16 bit audio stereo mode. Using Sony Premium miniDV tapes.
    Video plays back fine when not connected via firewire to G4 dual 867 with 2 GB Ram.
    Using default capture preset of 48 khz 16 bit, connect fire wire and video capture randomly stops stating it has lost connection or is missing capture data. If I switch to just plain capture using non controllable device, I have the same issue except the tape keeps playing but FCP stops capturing.
    Tried other tapes and no problem.
    Tried other fire wire cable and no problem.
    I am having problems only on this tape and when connected.
    When not connected it plays back on the camera with no stopping.
    Steve Bowers

    To answer your questions--
    Dumping preferences usually does not cause problems. More likely you updated some part of your system or are having other hardware issues.
    No updates or hardware issues. The original problem (discussed in another thread) was one where the video is skewed inward on the lower right corner. Apple instructed me to dump the preferences and start from scratch. That I did and now I am experiencing problems I did not have before. If it is hardware problems, then I guess it is just coincidental that FCP is just now presenting problems. However, the other problems I am having are software related and does not involve the camera.
    What software versions of FCP, OSX and QT are you running and have you updated any of them recently?
    FCP version-5.1.2
    OSX-10.4.8
    QT-7.1.3
    Is there anything special about the 'difficult' tape?
    No.
    Did you record it?
    Yes
    Was it the last of a bunch?
    Not sure. I buy bulk so this was one in a box of 5 that is was in a case of 50 boxes.
    Are you using the same camera as the playback device?
    Yes
    Does it work if you use another computer?
    Not sure what you mean. I have only one MAC G4.
    Was it recorded using another camera in a non-DV format?
    No. Playback is through same camera is was recorded on.

  • Music stops when screen goes to sleep but my headphones are inserted correctly?

    I have an Ipod nano 6th Gen, and when the screen goes to sleep the music stops.  I have set up my sleep/wake button to play/pause so when the screen goes black and the music has stopped, I press the sleep/wake button twice and the music starts again without the screen coming back on.  I have read other comments and I have made sure that my headphones are all the way there does not appear to be anything obstructing the headphones either.  Is anyone able to help me?  Thank you

    Solved by using a 3rd party music player that can access the library on the iPad and no longer using Apple's iPod app.

  • Phone locks when placing phone near ear but does not unlock afterwards

    I am experiencing a screen lock problem when making calls. After I initiate or receive a call and place my phone near my ear to talk, the screen goes black as in lock mode. Once i am done talking and I want to end the call, I move my phone away from my ear and put it in front of me to press the "end call button", but the screen keeps itself in lock mode. Sometimes i get lucky if a move the phone a lot to get the screen to show up again but most of the times i see myself having to press the lock button various times along with the menu button or just wait for the party to end the call and unlock it again. Is this happening to anyone else?

    This issue is something I am encountering as well. I will assume it has something to do with the current OS version and believe it will be addressed in 2.0.1 upon its release. I also know that by taping the power button the phone is sent into lock mode, but it appears no one hear is using a case so that is likely not the issue.
    I have also got the phone to do this while using the SMS feature. It happened following the sending process of several SMS messages.
    I'll contact Apple today and post a full recount of the conversation at some point today.

  • Issue when switching rooms in spark but does not exist in mx namespace?

    I have a Flex SDK 4.0 application that I have declared with <s:Application.  In this application I have 2 rooms, that have two different ConnectSession components associated with each as well as seperate Pod's with seperate shareID's for each. (nothing in the two rooms overlap).  I also have 2 buttons that switch between room1 and room2 when either button is clicked.
    my issue is that using the <s:Application declaration for my app..then transitioning from room2 BACK to room1 (transitioning from room1 to room2 works fine), gives me this error:
    TypeError: Error #1034: Type Coercion failed: cannot convert studygroups2@343f0a1 to mx.core.Application.
    at com.adobe.rtc.collaboration::SharedCursorPane/removeMyEventListeners()[C:\work\branches\c onnect\1004\cocomoPlayer10\src\com\adobe\rtc\collaboration\SharedCursorPane.as:477]
    at com.adobe.rtc.collaboration::SharedCursorPane/onSynchronizationChange()[C:\work\branches\ connect\1004\cocomoPlayer10\src\com\adobe\rtc\collaboration\SharedCursorPane.as:538]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.sharedModel::CollectionNode/http://www.adobe.com/2006/connect/cocomo/messaging/internal::setIsSynchronized()[C:\work\b ranches\connect\1004\cocomoPlayer10\src\com\adobe\rtc\sharedModel\CollectionNode.as:683]
    at com.adobe.rtc.messaging.manager::MessageManager/onDisconnect()[C:\work\branches\connect\1 004\cocomoPlayer10\src\com\adobe\rtc\messaging\manager\MessageManager.as:813]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.session.managers::SessionManagerBase/http://www.adobe.com/2006/connect/cocomo/session/internal::disconnect()[C:\work\branches\c onnect\1004\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerBase.as:112]
    at com.adobe.rtc.session.managers::SessionManagerFMS/onFmsConnectorDisconnect()[C:\work\bran ches\connect\1004\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerFMS.as:2 50]
    at flash.events::EventDispatcher/dispatchEventFunction()
    at flash.events::EventDispatcher/dispatchEvent()
    at com.adobe.rtc.session.sessionClasses::FMSConnector/disconnect()[C:\work\branches\connect\ 1004\cocomoPlayer10\src\com\adobe\rtc\session\sessionClasses\FMSConnector.as:393]
    at com.adobe.rtc.session.managers::SessionManagerFMS/http://www.adobe.com/2006/connect/cocomo/session/internal::logout()[C:\work\branches\conne ct\1004\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerFMS.as:314]
    at com.adobe.rtc.session.managers::SessionManagerAdobeHostedServices/http://www.adobe.com/2006/connect/cocomo/session/internal::logout()[C:\work\branches\conne ct\1004\cocomoPlayer10\src\com\adobe\rtc\session\managers\SessionManagerAdobeHostedService s.as:139]
    at com.adobe.rtc.session::ConnectSession/logout()[C:\work\branches\connect\1004\cocomoPlayer 10\src\com\adobe\rtc\session\ConnectSession.as:442]
    at com.adobe.rtc.session::ConnectSessionContainer/logout()[C:\work\branches\connect\1004\coc omoPlayer10\src\com\adobe\rtc\session\ConnectSessionContainer.as:267]
    at XXXXX/goGlobal()[C:\Users\Rees\Adobe Flash Builder 4\XXXXX\src\XXXXX.mxml:50]
    at XXXXX/___XXXXX_Button2_click()[C:\Users\XXXXX\Adobe Flash Builder 4\XXXXX\src\XXXXX.mxml:105]
    However, when I change the application to <mx:Application, and then attempted the transition again... BACK to room1 from room2.. everything works FINE!  This may be a simple issue so please bare with =).  Can anyone tell me why I'm getting this issue with spark and how to fix it so that I CAN use spark as my application namespace?  Thanks in advance!

    Wow, that's an interesting one - seems as though the sharedCursorPane has
    some hard requirement that the base App be mx (this isn't terribly
    surprising, considering it was built with the mx components, but it's still
    a bug). Can you link against the source code (provided for player 10 now!),
    and change that line in sharedCursorPane :
    From :
    Application(mx.core.Application.application).stage.removeEventListener(Mouse
    Event.MOUSE_MOVE, onMouseMove);
    To :
    stage.removeEventListener(MouseEvent.MOUSE_MOVE, onMouseMove);
    and see if that works for you? I can't honestly tell why we're using the
    line that was there... It's possible this was a workaround for another
    issue. Anyhow, if you wouldn't mind being the guinea pig for this one, we
    can get to the bottom of it.
      thanks!
       nigel

  • IPod Touch 3rd generation is not turning on and gets really hot when I plug it in but is not charging...

    I have an iPod Touch 3rd generation and yesterday I was using it and noticed that it reset to a different time zone and when I dug a little deeper realized that it reset the date to December of 1969. I just went in and changed it all back. I was out of the house all day today and didn't take it with me, when I went to use it, it wouldn't turn on. I assumed it was dead, so I plugged it in and got ready for bed. I realized that the charging screen never appeared and it never made the little noise it does when you plug it in. I picked it up and right near where the charger plugs in, it was very hot. I use it when it'd plugged in from time to time and it is NEVER that hot. I then tried to plug it into the computer where it again didn't do anything and didn't show up as a device that was plugged in on my iTunes. Again, it got very hot very quickly. I am using the cord that came with it and an actual Apple brand wall charger. I don't know what else to do. Some people said to hold the two buttons down for a little bit, but nothing happened on mine. Please help!

    Warm is normal, too hot to handle, literally, is not.
    If you're concerned, make an appointment at your local apple store and have them check your charger out.

  • TS1286 my ipod touch will charge when using a wall charger, but will not sync or charge to my computer?

    when i connect my ipod touch to my computer it does not show up the syncing icon on the battery and does not respond when fully pushed in. i can charge my ipod with the same cable into a wall charger but not a computer even though i am using the same cable.

    iOS: Device not recognized in iTunes for Mac OS X
    or
    iOS: Device not recognized in iTunes for Windows

  • Can anyone provide a practical example of when Etherchannel would be configured but then NOT trunked...

    I am in the process of educating a client of mine about all aspects of switching.
    I was teaching them about Etherchannel the other day, when I realized that I did not know for sure whether or not one could create an Etherchannel and then not trunk it.
    Based on some examples I have seen, I am still led to believe it is possible.
    I am just trying to think of a practical example of configuring such...  The only thing that comes to my mind is if you are NIC teaming a server's two NIC's then we may want to Etherchannel but not trunk?...
    Thanks in Advance!

    Disclaimer
    The Author of this posting offers the information contained within this posting without consideration and with the reader's understanding that there's no implied or expressed suitability or fitness for any purpose. Information provided is for informational purposes only and should not be construed as rendering professional advice of any kind. Usage of this posting's information is solely at reader's own risk.
    Liability Disclaimer
    In no event shall Author be liable for any damages whatsoever (including, without limitation, damages for loss of use, data or profit) arising out of the use or inability to use the posting's information even if Author has been advised of the possibility of such damage.
    Posting
    Another example would be a p2p link between two L3 switches.

Maybe you are looking for