Capture vidéo plante avec Bureau à distance (remote desktop bug on capture)
J'ai une carte d'aquisition vidéo blackmagic avec un caméras branché en hdsdi. L'ordinateur de capture est situé dans la salle des serveurs et je veut me connecter en "bureau à distance" pour démarer et arrêter la capture. Tout fonctionne bien sauf si je diminue ou ferme la fenêtre du "bureau à distance". Adobe première por CS6 à cessé de fonctionner
Windows 8.1
I have a video card blackmagic capture withcamerasconnected on HDSDI.The capture computer located in the server room and I want to connect with "remote desktop" to start and stop capture.Everything works fine unless iI reduce or close the "Remote Desktop". Adobe premiere CS6 stopped working and capture fail.
windows 8.1
Hello, sounds like Video card and/or heat problems.
Have you blown the dust out lately? Let it cool for an hour or so.
Get Temperature Monitor to see if it's heat related...
http://www.macupdate.com/info.php/id/12381/temperature-monitor
iStat Menus...
http://bjango.com/mac/istatmenus/
And/or iStat Pro...
http://www.islayer.com/apps/istatpro/
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode).
Similar Messages
-
Connexion bureau à distance de Ipad2 avec Windows 2003 server
Connexion bureau à distance de Ipad2 avec Windows 2003 server
Bonjour et bienvenue aux discussions. Si le serveur fournit des services VPN, vous pouvez certainement vous connecter à cela. Vous aurez besoin d'applications iPad de parcourir les dossiers sur le réseau (network); par exemple voir FileBrowser ou Air Sharing Pro (et les types de fichiers pris en charge).
-
Mini Mac Remote Desktop and Elgato Video Capture Stick
I have 10 Mini Macs simultaneously capturing video via a Elgato Vapture Stick.
Instead of having 10 monitors, keyboards, and mice, I wish to control the Mini Macs by remote desktop. The problem is the Mini Macs won't refresh the video overlay if there is no monitor directly attached to them. I can establish a remote desktop but I can't see the video being captured in the Elgato capture window. As soon as I attach a monitor to the Mini Mac with the Elgato Capture Stick, then then the video is displayed correctly on the remote desktop. The goal is just to have one monitor on the Mini Mac with the remote desktop.Actually, a slightly more recent version - 3.4.3 (6308) - is downloadable here
http://www.elgato.com/elgato/int/mainmenu/support/Update-Start/Update-EyeTV-3
... directly from the Elgato support website. -
Captivate to capture remote desktop?
Captivate is running from one machine and I'm using remote
desktop to showcase various windows on a different Vista machine.
This article mentions some tweaks to the display you can make to
reduce file size.
http://www.adobe.com/devnet/captivate/articles/filesize_02.html
Where do you change the display:
a)on the VM only?
b)only on the hosting computer (which runs Captivate)?
c)on both the host computer and the VM machine?
Thanks.> Captivate is running from one machine and I'm using
remote desktop to
> showcase
> various windows on a different Vista machine. This
article mentions some
> tweaks
> to the display you can make to reduce file size.
>
http://www.adobe.com/devnet/captivate/articles/filesize_02.html
Where do
> you
> change the display:
>
> a)on the VM only?
Change all system settings on the VM - that's all the window
colours and
appearance settings etc. This sets all the colours you are
capturing to the
most simple.
> b)only on the hosting computer (which runs Captivate)?
> c)on both the host computer and the VM machine?
You could also set the VM software settings to 16-bit or even
8-bit. There's
no need for you to change the screen settings of the machine
running
Captivate.
Steve
http://twitter.com/Stevehoward999
Adobe Community Expert: eLearning, Mobile and Devices
European eLearning Summit - EeLS
Adobe-sponsored eLearning conference.
http://www.elearningsummit.eu -
How to capture the remot desktop using RMI?
Hi friends..
I am doing a mini project to capture the remot desktop using RMI. I am very new with this subject. So 'm waiting for the help of experts...You can't. RMI doesn't do that. After you have captured it, some other way, you can transmit it via RMI, or plain Sockets, or several other ways.
-
Photosop Elements 10 ne lit plus les images des vidéos prises avec mon Iphone 4S sous IOS 07 ?
Je traite mes photos avec PSE 10 et depuis une récente mise à jour proposée sur internet, je ne peux plus lire les images dfes vidéos prises avec mon Iphone 4S sous IOS 07, (Seulement les sons), alors qu Windows les affiche normalement. Pourqoi?
-
Mouse not captured in remote desktop session
I have one (but only one) Hyper-V VM which has the "mouse not captured in remote desktop session" issue. I have researched this problem extensively and so far none of the suggested fixes I have found are working.
The VM is running Windows Server 2012. It is completely up-to-date.
The Hyper-V server its running on is running Windows Server 2012 R2. Also up-to-date.
All integration services are offered in the VM according to the Hyper-V management tool. I have tried removing all integration services from the VM and putting them back with the Hyper-V management tool. This had no effect.
I have also set the VM to "Detect HAL" using BCDEdit... this had no effect.
The only suggestion I could not try is the suggestion to use the "Insert Integration Services Setup Disk..." command from the "Action" menu. I can not do this because a message to "Tap to choose what happens with this device"
message pops up when I try it... and, guess what? I can't "tap" it because like everyone else we don't use touch screens in the server room. I can't click it either because my mouse doesn't work. Trying to click it just brings up the same "mouse
not captured in remote desktop session" message I am trying to get rid of.
Any suggestions?Hi,
During your description, it seems you are using the touch screen to operate the server, personal experience is in general we don’t choose the touch screen to do this, please
try to use the general mouse try again, it seems your device not compatible with the Server 2012R2. You can search your device in Windows Server Catalog to identify the hardware compatibility.
The Windows Server Catalog.
http://www.windowsservercatalog.com/results.aspx?bCatId=1283&avc=10
Hope this helps.
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
"Mouse Not Captured In Remote Desktop Sesion" in Hyper-V
This is a silly little problem, but on my 2008 server I installed a Hyper-V virtual machine (a Win 2008-64 system), and I can't get it to capture the mouse.
Integration services are installed and the mouse is listed but I can't capture it. I've tried Ctrl Alt right arrow.....
I'm used to VmWare and this is my first time with Hyper-V.Hi Mike,
Is the issue continues?
If you have a Windows Server 2008 with Hyper-V enabled, and the virtual machine is Windows Server 2008 X64, after you create the virtual machine, you
don’t need to install the Integration Services, and the virtual machine will capture the mouse even if you remote desktop into the remote Hyper-V computer and then manage the virtual machine there use Hyper-V Manager.
Please boot the Hyper-V computer to see whether you get the same issue. Please also check whether you get the same issue with other virtual machines.
Best Regards,
Vincent Hu -
windows 2012 + hyper-v + mouse not captured in remote desktop session + integrated services installed
Hi,
I am using Server 2012 R2 with Hyper-V and CentOS 6.5 that installed GNOME.
Same no mouse on remote desktop session or on the host's Hyper management interface.
From my knowledge, CentOS from 6.4 build in include the IS, how do I update the IS in CentOS 6.4-6.5 guest OS? Any detail docunment for reference?
Thank you. -
Connexion bureau à distance a cessé de fonctionner
Signature du problème :
Nom d’événement de problème: APPCRASH
Nom de l’application: mstsc.exe
Version de l’application: 6.3.9600.16415
Horodatage de l’application: 524b4de4
Nom du module par défaut: BandwidthGuard.dll
Version du module par défaut: 1.0.0.1
Horodateur du module par défaut: 514f675d
Code de l’exception: c0000005
Décalage de l’exception: 0000223e
Version du système: 6.1.7601.2.1.0.256.1
Identificateur de paramètres régionaux:
1156
Information supplémentaire n° 1: 0a9e
Information supplémentaire n° 2: 0a9e372d3b4ad19135b953a78882e789
Information supplémentaire n° 3: 0a9e
Information supplémentaire n° 4: 0a9e372d3b4ad19135b953a78882e789
please help meHi,
Please uninstall Cucusoft Net Guard from the workstation and then test to see that Remote Desktop Connection (mstsc.exe) works properly.
Thanks.
-TP -
Print Screen using new Microsoft Remote Desktop app on Mac
I am trying to figure out how to do a screen capture of a window using the new Microsoft Remote Destkop app on my MacBook Pro. I don't have a numeric keypad so the Ctrl+Alt+Minus on the keypad does not work. On the older remote desktop
client there were preferences to remap this but I cannot figure it out on the new app. And the snipping tool is great if connected to an OS that has it. Otherwise it does not help.
Thanks!
RichardHi,
Please check if you have the PrtScn key on your keyboard. If so, you can use this key to capture a full screen screenshot and paste it such as MS paint.
If you do not have the key, you can start the On-Scrren Keyboard to use the PrtScn Key within the remote session.
Control Panel\Ease of Access\Ease of Access Center
Hope this helps.
Jeremy Wu
TechNet Community Support -
How to configure CISCO ASA 5510 for internal remote desktop ?
Helo,I have a client that want to install new ASA (5510) in their network.
and then I did some experiment to implement it. the topology is like this :
--------configuration---------
2800 router :
interface FastEthernet0/0
ip address 172.16.1.1 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
ip address 192.168.11.3 255.255.255.0
duplex auto
speed auto
ip route 192.168.12.0 255.255.255.0 172.16.1.2
1841 router :
interface FastEthernet0/0
ip address 172.16.1.2 255.255.255.0
duplex auto
speed auto
interface FastEthernet0/1
ip address 192.168.12.1 255.255.255.0
duplex auto
speed auto
ip route 0.0.0.0 0.0.0.0 172.16.1.1
ASA 5510 :
: Saved
: Written by enable_15 at 19:21:31.639 UTC Mon Sep 13 2010
ASA Version 8.2(1)
hostname ciscoasa
enable password **** encrypted
passwd ***** encrypted
names
name 192.168.12.0 Branch
dns-guard
interface Ethernet0/0
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/1
nameif inside
security-level 100
ip address 192.168.11.1 255.255.255.0
interface Ethernet0/2
shutdown
no nameif
no security-level
no ip address
interface Ethernet0/3
shutdown
no nameif
no security-level
no ip address
interface Management0/0
shutdown
no nameif
no security-level
no ip address
management-only
boot system disk0:/asa821-k8.bin
ftp mode passive
same-security-traffic permit inter-interface
same-security-traffic permit intra-interface
access-list inside_access_in extended permit ip 192.168.11.0 255.255.255.0 Branch 255.255.255.0
access-list inside_access_in extended permit ip 192.168.11.0 255.255.255.0 any
access-list inside_access_in extended permit ip Branch 255.255.255.0 192.168.11.0 255.255.255.0
tcp-map mssmap
synack-data allow
invalid-ack allow
seq-past-window allow
urgent-flag allow
pager lines 24
logging enable
logging asdm informational
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
asdm image disk0:/asdm-621.bin
asdm location Branch 255.255.255.0 inside
no asdm history enable
arp timeout 14400
static (inside,inside) 192.168.11.2 192.168.11.2 netmask 255.255.255.255
static (inside,inside) 192.168.12.2 192.168.12.2 netmask 255.255.255.255
access-group inside_access_in in interface inside
route inside Branch 255.255.255.0 172.16.1.1 1
timeout xlate 3:00:00
timeout conn 10:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
dynamic-access-policy-record DfltAccessPolicy
http server enable
http 0.0.0.0 0.0.0.0 inside
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart
crypto ipsec security-association lifetime seconds 28800
crypto ipsec security-association lifetime kilobytes 4608000
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept
webvpn
username ***** password ***** encrypted
class-map mymap
match access-list inside_access_in
class-map inspection_default
match default-inspection-traffic
policy-map global_policy
class inspection_default
inspect ftp
inspect h323 h225
inspect h323 ras
inspect netbios
inspect rsh
inspect rtsp
inspect skinny
inspect esmtp
inspect sqlnet
inspect sunrpc
inspect tftp
inspect sip
inspect xdmcp
policy-map myPolicy
class mymap
set connection advanced-options mssmap
service-policy global_policy global
service-policy myPolicy interface inside
prompt hostname context
Cryptochecksum:a605d94f29924e5267644dd0f4476145
: end
I can successfully ping from host 192.168.12.2 to 192.168.11.2, but I can't do remote desktop from those host.
then I use wireshark to capture packet in my computer and it says that TCP ACKed Lost Segment.
"1373","164.538081","192.168.11.2","192.168.12.2","TCP","47785 > ms-wbt-server [SYN] Seq=0 Win=8192 Len=0 MSS=1460 WS=2"
"1374","164.538993","192.168.12.2","192.168.11.2","TCP","[TCP ACKed lost segment] ms-wbt-server > 47785 [RST, ACK] Seq=1 Ack=1407706213 Win=0 Len=0"
I can guarantee that both computers are remote desktop enabled and all firewall have been disabled.
please help, any suggest would be great .
thanks .
sincerley yours
-IAN WIJAYA-ear Ian_benderaz,
Thank god i am not alone on this ,
Me too having the exact same problem , i can ping to the host ,but no remote desktop .
Somebody please help me on this , how enable remote desktop on asa 5505
Thanks -
Can 1 instance of Windows 8.1 ENTERPRISE host multiple Remote Desktop connections?
I am shopping for the components for building a machine with fair, high-performance hardware. I have Windows 8.1 Professional. I wanted to know if either Windows 8.1 Professional or Windows 8.1 Enterprise can support multiple remote connections
from users outside the local network. For example, my brother is based in San Diego, CA and has an underpowered laptop. Is there any way to make a remote connection over that much distance, from San Diego to Northern Virginia, from a RDP client running Windows
8.1 Professional to a RDP "server" Windows 8.1 Professional/Enterprise machine, and run a modern, single- or multiplayer- game over smoothly that connection? At the very least, is it possible to run common
apps (e.g. Microsoft Office 2013 IE 11, Adobe Acrobat XI) smoothly on a Windows 8.1 Pro RDP client connected to a Windows 8.1 RDP "server" located 2250+ miles away?
Would upgrading my installation from Professional to Enterprise improve the responsiveness and display quality for my remote users?
I know Windows Server R2 2012 has features specific for handling remote connections, but I am trying to keep a Windows 8.1 user experience. Still, if anyone can show some evidence that Windows Server 2012 R2 Remote Desktop Services (RDS) improves display
and responsiveness over long-distances for remote (RDS) connections, then I will shop for Windows Server 2012 R2 Standard instead. The huge drawback of Windows Server 2012 R2 Standard CALs is the enormous cost to enable 3-5
remote connections for family, non-commercial use.
Has anyone attempted to host long-distance remote access, non-commercially, for 3-5 connections? Has it worked well? What, in general, is required?
T. WebsterHi,
It depends on the quality of the network connection to run the software smoothly throuth RDP. And I don't think the quality would be better if you upgrade to Windows 8.1 Enterprise.
Windows 8.1 allow only one session of RDP, the Remote Desktop Server in Windows other than the Windows Server edition has a limitation to allow only one concurrent user per session by default, i.e. if someone remotely connects to the computer over RDP then
whoever was logged in at that moment will be automatically logged off, even if that user is physically present at the computer. This is by design.
Regarding more information about RDP, please take a look at the following articles:
Remote Desktop app help
Remote Desktop Connection: frequently asked questions
Best regards
Michael Shao
TechNet Community Support -
Concept:
Every month i need to find the list of .rar files from the
E:/TempBackup directory from the different environments (remote desktop servers) and i need to delete the current month
.rar files alone from the respective (E:/TempBackup) directory. below is example files structure inside the
E:/TempBackup.
example:
zDROP_2014_08_31_Backups.rar
zDROP_2014_09_31_Backups.rar
zDROP_2014_10_31_Backups.rar
from the above list i need to delete the zDROP_2014_08_31_Backups.rar(current month) file alone and also logs should be capture for this deletion.
key words for this are zDROP and Current month and date.
i need a stored procedure for this concept. could you please help on this.Hello,
You can schedule an operating system task (Control Panel -> Schedule task) to either call a batch file or a PowerShell script.
Please read the following resources for examples:
http://social.technet.microsoft.com/Forums/windowsserver/en-US/61373719-fffb-4d94-bdbe-7d8ed8620b44/delete-filesfolders-on-remote-servers-using-powershell?forum=winserverpowershell
http://www.networknet.nl/apps/wp/archives/943
http://jeffwouters.nl/index.php/2011/10/powershell-script-to-delete-files-older-that-a-week/
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Remote Desktop Consuming ALL System Memory
Folks, I have a Windows 7 enterprise machine through which i RDP to another desktop on the same floor as mine, which ends up freezing my machine untill i donot close out the RDP program from Task Manager.
On checking from the Process tab i see that MSTSC.exe process is consuming almost all of the 8GB of memory i have on my machine. When i kill the present RDP session and start a new one, it starts consuming memory from MBs and reaches to GBs almost
all memory capacity.
I have replaced my machine with a new rebuilt machine alltogether, but still is the same issue.
I have also changed the Experience setting and optimised the session settings for RDP but no good.
Please suggest as it is hampering my day to day work.Hi,
I suggest we first run Xperf tool to take a look for the high memory usage:
WPT: WPR/Xperf: Capture high cpu, disk i/o,
file, registry, networking, Private bytes, Virtual bytes, Paged Pool/Nonpaged pool and/or application slowness.
Similar threads suggested that the high usage caused by MSTSC.exe is some printer related issues, please take a check with your printer configuration and the printer drivers.
Here;
here.
In addition, please also take a look at this KB article:
High CPU utilization by the Svchost.exe process and the Lsm.exe process in the Remote Desktop session after you remotely connect to a computer that is running Windows 7 or Windows Server 2008
R2
Best regards
Michael Shao
TechNet Community Support
Maybe you are looking for
-
How to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end
how to connect new iMac to tv with a hdmi cord on one end and a thunderbolt on the other end
-
Is there a comparable automatic back-up system to Time Machine for 10.4.11?
My dad has 10.4.11 running on a G4 tower. I want to get him a back-up system that will save all his work. I myself have an Intel Mac running 10.6.8, with Time Machine saving all of my work to an external HD. I know you can't use Time Machine with
-
Anyone think of why this monitor won't work?
I have a 2009 mac pro with an ati 1gb card. it has a dvi and two displayports. The dvi monitor has my dell on it, no problems. I had this old vga monitor, got a mini displayport to vga adapter, plugged up, and nothing. The monitor's power flashes as
-
WiFi Internet connection lost after iMac wakes up, what to do ?
Hi, I used my iMac for a while with an older D-link product and Internet connection was fine. I purchased a new D-link product and whenever my iMac goes to sleep and wakes up again, I lose INternet connection although my airport icon still recognizes
-
Issue with Applications, file paths, mobile accounts in snow Leopard OD
Hello Everyone, The Facts: 2 x Xserves running Snow Leopard 10.6.2 Server (1 is a Open Directory Master, the other a backup/slave) About 20 end-users running 10.5.8 Leopard and 10 end-users running 10.6.2 Snow Leopard on MacBook Pro laptops. All lapt