Capture window won't read time code any more

I haven't seen this exact problem listed on the board before --
When digitizing, the TC display in the upper right corner of the Log & Capture window wouldn't "turn over" from TC 07:59:29:29 to 8:00:00:00. No big deal, I set the out point slightly before hour 8, and the clips were captured without a problem.
Now, when trying to digitize the next tape, it doesn't see TC at all. The counter stays at 00:00:00:00. I've re-started the app and the computer, re-powered my "deck" (a Canon ZR100 camcorder), and re-seated the FW cable on both ends.
What can I do to get Log & Capture to read TC again?

Cleaning the tape heads didn't do anything, except cause me to notice that the ZR100 wasn't seeing the TC either. It can read TC for tape #24 and beyond (where the record TC was set back to the 0 hour).
Does this mean that perhaps the DP didn't record with LTC or VITC for tapes 8 through 23? Is there one type of TC that consumer camcorders won't see?
I promise to Google this, but I swear you guys are generally just as fast.
1.8 GHz G5 * 150 GB startup drive * 1.5 GB DDR SDRAM Mac OS X (10.4.4) FCP 5.0.4 * 400 GB internal ATA * 500 GB LaCie d2 * nVIDIA GeForce FX 5200

Similar Messages

I have an 11" Macbook Air. When I use Garageband it opens in a window so large that the bottom corner is not accessible so I can't decrease the window so that I can see the top and bottom of the window at the same time. Any suggestions?

When I use Garageband the window is so large that I can't reach the bottom corner to decrease the window to fit inside the display so that I can see the top and bottom of the window at the same time.
Any suggestions?

You can reduce the window by grabbing any edge or corner. You don't have to use the bottom right anymore.
You could also temporarily move the dock to the left/right so you can reach the bottom.

ITunes 11.1.3.8 won't read contents of any device

Using Win8, iTunes won't read contents of any device. using 11.1.13.8
Have seen many fixes for it.
Need help. Newer computer with new install. New iPhone and iPad Retna
Please help if you can.
Thanks

What do you mean "iTunes won't read contents"?
What specifically is happening?
Was the ENTIRE iTunes folder copied from the old computer to the new computer? iDevices are not and have never been backup devices or a way to move content to a new computer.

QT won't play .mov files any more

After a complete system re-install, QT player won't play .mov files any more. It tells me, some components were missing. Hey, this is its own file format!
MPG files run OK.
Thanks a lot for a good idea!
Peter

What format are the videos that don't play.
WMV...Windowa Mwdi Videos you'll need the flip4mac component. Free trail:
http://www.telestream.net/flip4mac-wmv/overview.htm
Other codecs, Perian and it's free:
http://perian.org/
Flash videos like the one on youTube. Adobe Flash comonent and it's free.
http://get.adobe.com/flashplayer/?promoid=DXLUJ
You should download all three and install. Remember to rebuild your Permission after install any or all of the above.

TS1702 iBooks won't load PDF files any more on my Ipad2. Anybody seen this one before?

Hello All,
iBooks won't load PDF files any more.
I have a lot of PDF files so I thought I reached a maximum number of files or space so I deleted a lot of old files but this did not help.
I rebooted, synced, updated, restarted, etc. - everything that I can think of and I still have the same problem.
I don't remembered the last file that I loaded into iBooks, as I usually put them into collections.
I can still load PDF files into other applications like PDF Reader, but I prefer to have them all in iBooks.
Anybody seen this one before?
I have 64GB iPad2 and I have over 14GB free space.

There have been several threads on this topic over the last few weeks. It's not clear what the issue is, and it is not universal, but tend to effect users storing large numbers of PDFs in iBooks. Possible it has some thing to dowith capacity of the app, or specific characteristics of some of the PDFs.
You might have a look at the "More Like This" list to the left of this page.

Windows won't read the Drivers DVD

So I've installed Windows XP SP2 on my mac. It's the windows disk that came with my previous laptop, a dell pc. The installation of the windows went ok, and I'm able to boot my windows side up. For some reason, when I insert the drivers DVD, my mac won't read it and will only eject it. A friend of mine downloaded the drivers, and I tried that but I had no luck.
Does anyone have any idea as to what the problem may be?
Thanks much!

OEM Dell/HP etc discs usually don't work (in a few cases they seem to) and of course transfering the activation key to a new computer??
By 'drivers DVD' I assume you are referring to OEM or retail Mac OS X 10.5 or later DVD? you could try copying the OS X DVD to a flash card from another PC and see if that works.

Capture window won't disappear

Whenever I'm capturing something, the capture window moves itself in front of everything else, including other programs. I know that it doesn't have to be like this, but how do you change that setting?

Well, using FCP rescue will trash all my settings - right?< </div>
Of course it will. But not before it makes a copy of your prefs file.
You cannot separate the possible prefs problem from a possible prefs cause without trashing the entire prefs file. There just aren't that THAT many settings that you can't recall them and re-establish them.
You certainly do not need FCP REscue to do this, just make a coyp of your prefs file, call it something unique, move it out of the prefs folder to someplace where you can find it and trash the original.
bogiesan

Adobe won't let me download any more trials? I need to try Photoshop CC.....

For some reason, Adobe will not let me download any more trials, and I really need to download Photoshop CC. It has been exactly one day since I've started the other trials. I click the "try" in the stupid window for the creative cloud, but nothing happens.

Hello,
please have a first look at "Troubleshoot download Problems" >>> http://helpx.adobe.com/x-productkb/global/troubleshoot-download-problems.html
You used these download sites? (I use CC could be you can't see some of them, but please have a try.)
http://www.adobe.com/downloads.html?promoid=JZEFS >>> https://creative.adobe.com/products or
https://creative.adobe.com/products/photoshop?promoid=KHTUU
Hans-Günter

Since i updated to itunes 11 for windows 7 it doesn't open any more!!!!

Since i updated to itunes 11 for windows 7, 64 bits, the program dosen't open, I've allready reinstall the 10.7 version but it doesn't work neither any more, what can i do??? I've just repair it, reinstall it, download it from apple's web site but nothing works, please help!!

Thi solved my problem!!!
http://support.apple.com/kb/TS2363

4.2gigs on my Zen micro and won't let me put any more

I have put 4.2 gigs worth of mp3s on my Zen Micro but when I try to add any more I am informed that the destination dri've is full! Why?
I am using the playsforall firmware etc etc so I can drag and drop directly from my hard dri've.
Is this the reason? Is there any way I can get my full 5 gigs of space? I don't want any of the other features on the zen, I don't want to record audio etc etc, just put my mp3s on there. Also How can I tell how much space on my zen has actually been used? I tried right click on the device -> properties but it doesn't tell me.
suggestions?

You might want to try a disk cleanup, and format is also available from Rescue Mode. To access the Rescue Mode on the Zen Micro, remove the battery, hold the power switch to the "on" position, reinsert the battery. Choose Disk Cleanup from the menu. Note: Disk cleanup should not remove your tracks. It searches through the disk for files and rebuilds the index, and can be useful for correcting any strange behaviour.
Note that the tracks will take up more space than their collecti've size, which is the nature of disk systems. But I'm not sure what space they will take up, and the cluster size on the Creative player.

Itunes won't let me add any more videos for my ipod classic

Hi
I got a ipod classic (80gb) for christmas and I have now added 3.2 hours of video onto itunes which has been synced to my Ipod however itunes will now not let me add any more videos -even though I have added no music files on it as yet , could it be because all the videos I have downloaded myself and converted to mp4 via a internet program? could anybody help as my ipod is supose to play up to 100 hours of video files.
Thanks for everyones help

What is the file suffix of the video files you are trying to add to iTunes? What application did you use to create them?

Itunes for windows won't read or burn to my cd player

I am having a weird problem. I had an HP Lightscribe cd burner installed on my system and when i put a cd into the computer, itunes will read it and show me the name of the cd and all the tracks, but when trying to play, import, or burn to this drive, itunes will go down the list of tracks one after another for about a half second each and wont do anything. I have an external cd burner as well with a lite-on cd burner, and when i plug this in everything works as it should with no problems.
for the past 2 years, i have pulled out my external cd burner everytime i wanted to add new music or burn a cd from itunes, but i no longer have the external drive, and so i purchased a new lite-on cd burner thinking the issue was compatibility with the lightscribe drive. unfortunately now that the new drive is installed, i still have the exact same problem and it is frustrating me to no end. i have submitted help emails to apple, but to no response. i have reprogrammed my computer and reinstalled itunes numerous times. I have the most current version of all drivers and the latest version of itunes. my windows is completely up to date. the drive itself will import fine through media player, and burnes fine through nero. the only information i can get from the cd diagnostics is below, but it contradicts itself by saying i am logged in as administrator, and then later says to burn or import from this drive u must be logged in as administrator and gives error 1450.
Microsoft Windows XP Professional Service Pack 2 (Build 2600)
NVIDIA AWRDACPI
iTunes 7.4.1.2
CD Driver 2.0.6.1
CD Driver DLL 2.0.6.2
LowerFilters: PxHelp20 (2.0.0.0),
UpperFilters: GEARAspiWDM (2.0.6.1),
Current user is an administrator.
Video Display Information:
NVIDIA GeForce4 Ti 4600
Connected Device Information:
Disk drive, WDC WD20 00JB-00DUA0 SCSI Disk Device, Bus Type SCSI, Bus Address [1,0]
Disk drive, WDC WD80 0BB-60CJA0 SCSI Disk Device, Bus Type SCSI, Bus Address [0,0]
CD-ROM Drive, LITE-ON CD R LH52R1P SCSI CdRom Device, Bus Type SCSI, Bus Address [1,0]
E: LITE-ON CD R LH52R1P, Rev XL13
Audio CD in drive.
Found 13 songs on CD, playing time 56:36 on CDROM-XA media.
Track 1, start time 00:02:00
Track 2, start time 04:02:21
Track 3, start time 08:31:36
Track 4, start time 12:00:46
Track 5, start time 16:39:74
Track 6, start time 20:38:45
Track 7, start time 25:40:11
Track 8, start time 28:51:59
Track 9, start time 33:49:05
Track 10, start time 38:28:51
Track 11, start time 43:00:74
Track 12, start time 47:14:20
Track 13, start time 52:49:28
Audio CD reading failed. Error Code: 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450 1450.
To play or import music from a CD in this drive, you must be logged in as an administrator.
Get drive speed succeeded.
The drive CDR speeds are: 12 16 24 32 40 48 52.
The drive CDRW speeds are: 12.
The last failed audio CD burn had error code 4000(0x00000fa0). It happened on drive E: HP DVD Writer 740b on CDR media at speed 40X.
Can anyone please help me out with this issue?? it is driving me crazy!! My life would be so much easier if i could burn and rip from itunes instead of having to use media player or nero.

I am experiencing the same issue with a new external DVD burner, a Sony DRX-840U. When I load a CD into this external drive it appears in iTunes but when you go to import or play the CD iTunes indicates playing or importing for each individual track for just a moment. The end result is that nothing is ever imported or played. I am experiencing this on two different systems. One a notebook running Win2K and the other a desktop running XPpro. If I use the internal DVD drives on either of these systems everything work just fine. Yet I am able to use this new external DVD drive with every other application. For example Window Media Player has no problem playing or importing the same CD that iTunes fails on. The last person indicated that if one set the DVD drive in question to be the drive of choice under preferences>advanced>burning that all was ok. I my case this Sony external drive is the drive listed as the drive of choice for burning yet the issue still exists.
As this appears to be an issue that others are also experiencing help from Apple Tech Support would be greatly appreciated.

OS 10.5 - Boot Camp - Windows won't read Mac Disc for Driver Install

Hello everyone.
I have been through half a dozen headaches and a dozen hours of time wasted on this problem. I've tried multiple windows discs untill finally I bought a brand new version of Windows XP Pro. I've followed all of the instructions in my printed boot camp manual and I continously run into one problem:
Once windows is installed completely and I am at the windows desktop and need to eject the windows disc and insert the leopard disc to install drivers, I do so and windows does not recognize the mac disc whatsoever. It says the drive is empty, it is 0kb of 0kb, I cannot explore the drive, I cannot do anything. If I open it it is blank. I cannot access the internet in any way on windows because there are no corresponding drivers.. so I am at a loss.
Can anyone please help me? What do I do? I really apologize if this question has been answered, but I could really use some help.

Hi Sotaris,
It's a little vague what you mean by the "leopard disk". Do you mean the disk of drivers Boot Camp burns, or the actual Leopard installation DVD?
What you're supposed to do is launch Boot Camp while booted to the Mac OS. One of the first things it does is create a CD of Windows drivers that XP will need for your Mac. So you must have a CD-R or CD-RW on hand.
After that, Windows XP is installed. When that's done, there will be a number of hardware components that XP naturally doesn't recognize. That's when you insert the driver disk Boot Camp creates. I may have listed the order of things a little bit off here, but the main point is it sounds like you're skipping, or missing the part to create the Windows driver disk and trying to put the Leopard DVD in the drive.

ICal won't read times prior to 08:00

I like the feature that enables me to specify event times during the inital input.
For example: if I write "Meeting 0900 to 1500", iCal will create an event called 'meeting' starting at 09:00 and ending at 15:00.
However,
I'm a shift worker and my events can occur any time, day or night. If I enter the following... "Meeting 0500 to 1300" iCal creates an event from 17:00 to 01:00 of the following day. I have tested this extensively and it descriminates against times that are enterered prior to 08:00am!!! I have tried changing the 'working day' parameters from 'midnight' to 'midnight', but it makes absolutely no difference.
This strange behaviour is ridiculous, how can I change it???

Martin,
It sounds like you may be using the 24 hour time format. Is that what you want?
If so, his is how I have System Preferences...>Language & Text>Formats>Times>Customize... set on my computer for that format:

Wireless Mighty Mouse on Windows PC (one last time). Any luck?

Anyone with any luck trying to pair a wireless Mighty Mouse with a Windows PC?
I'm trying to get the wireless Mighty Mouse to work on a PC (not a Mac with Boot Camp). I thought it should have been easy enough since I have other Bluetooth devices that work fine. I know that topic has been discussed before but I haven't come across anything definitive that shows a way to get it to work. Would someone please point me in the right direction. If not I'll be returning it for the wired Mighty Mouse.
As it stands now my Bluetooth software recognizes the Mighty Mouse but it can't pair it. I'm pretty sure it's a Bluetooth software issue. Your thought? Thanks.

I've installed 'Bluetooth Stack for Windows by Toshiba' to pair my bluetooth headset with XP to get music from iTunes. It's working great.
I've just tried to pair the Mighthy Mouse with XP and it's working!!!
Link: http://aps.toshiba-tro.de/bluetooth/pages/download.php
Message was edited by: Henk Puister

Capture window won't read time code any more

Similar Messages

Maybe you are looking for