Captured AVI type2 files shown up short after imported in CS3 PremierePro

Am a new user with On Location 3.0.159. Have encountered strange issues to the AVI type 2 files record via through 1394 from DVcam Deck Playout in slave mode. When clips imported to CS3 Premiere Pro, files read only 10' only on the time line as rest of files looks as cut out and missing where the original recorded clips were 28' in total. Have checked with scrubbing through DVR as both Video/Audio were fine in full 28' duration and there weren't any issues or error before the clips was ejected. Also I've checked the files with other player and they also reads 28" in full. Am I missing something?
Currently using latest CS3 Premiere Pro 3.1.1 with XP2 platform.

Took me couple of days nailed down where the problem was since there eren't any log's or error found nor system error as indicated.
OnLocation/direct to disk recording has no issues at all with these files batches, it acturally does faultlessly with tape direct captured to disk as well as Camera. The reason am trying captured batch of contents that runs for more than 4hrs. And working with CS3 Premiere under AVI-1 type take much longer conforming and indexing the contents as such. So by switching with OnLocation using AVI-2 type which Premiere like reducing the confroming time by almost 1/2, due to the fact that I'm working with mixed batch of contents in the field.
As for the issused am experiencing with these file were caused by 3rd party plug-in codec, some references already demonstrated and addressed with similiar issuses in the Premiere CS3 user forum, ref link http://www.adobeforums.com/webx/.3c064185
After I've un-installed the 3rd party plug-in, and bin it back to Premiere CS3, and there weren't any further issues with these batched captured AVI-2 files. All shown in full faultlessly!
Think this app really comes in handy for field user.. anyway thanks for your response..
and now needed to re-look into these 3rd party codec.

Similar Messages

Why are my legira hfm36 files so much bigger after import to iMovie?

Hello
When i import files from my camcord legira hfm36 the files become much lagrer after import... :-/
What is wrong, i use 32gb sdhc card in cam and When i import it All it Will take 270 gb space??? Why...
Palle

AVCHD which is likely the format you are shooting in create a .mts or .m2ts file that is highly, highly compressed as it is saved onto the camera. When it is decompressed and imported into iMovie it can expand up to between 40+ and at a max 75 Gbytes for each hour of video shot. So there's no free lunch when you shoot High Definition video on the typical AVCHD video cam, the space available you have to expand those video clips is going to evaporate very quickly. So consider purchasing an external USB hard drive as quickly as possible.

Picture Files staying in iPhone after import to Photos for Mac

After I connect my iPhone to my Mac, Photos asks to import. So I imported the photos. If I didn't ask to erase, Photos continues asking you to import the same pictures. In iPhoto I didn't have this issue. Any comments or suggestions? I am duplicating files unnecessarily.

I don't see an easy way to delete previously imported items, but these step worked for me. Be careful to make sure you do have copies of all these photos before you decide to delete them again!
1. Check the 'Delete items after import'.
2. REIMPORT all the 'Already imported' items.
3. Open the 'Last Import' album, and delete all those photos.
For your Secondary question, when the "Open Photos for this device" box is checked, that means when you plug in that iPhone, the Photos app will open up automatically.

Shot one frame short after import

I'm having a weird problem with 10bit uncompressed quicktimes imported into FCP being one frame shorter then they should be. I'm working with OS 10.4.11, FCP 6.0.3, Quicktime 7.4.5. The shots were originally shot on 35MM film then telecined at 1080 23.98 on HDCAM. I digitized them on a Kona LH at 1080 23.98 at 10 bit uncompressed. When my edit was completed I exported shots as self contained 1080 23.98 10-bit uncompressed quicktime files which we passed on to the VFX company on a FWHD. They did their work in Nuke/Shake and delivered the finished shots as self contained 1080 23.98 10-bit uncompressed quicktime files. After moving the files onto my media drive and then importing them into my project I find some of the shots are one frame shorter then the source shot. If I take one of the shots from the VFX render, open it with quicktime 7.4.5, and then save as an image sequence, the resulting folder imported into FCP and lined up with the VFX quicktime is now the correct length. It's one frame longer then the VFX quicktime but now matches the frame count of the source shot. I also opened the offending shot in a few other apps (After Effects 7 and Kona DPX translator) where they were the correct length
I suppose this could be related to the 23.98 frame rate however the compositors were working with quicktime files sent from FCP at the same frame rate.

Depending on what software the VFX house used, the media may have been modified in a way that is causing QT to mis-interpret the frame count, frame rate, or duration of the clips. It sounds like the frames are all there, but QT thinks the clip is 1 frame shorter than it's supposed to be. The media is ok, and it's just the QT metadata that is funky.
The frame sequence process sounds clunky, but I bet there is another batch process you can do with FCP or compressor to fix the files. These would still require exporting a new set of files and reconnecting. Sometimes placing each clip in a sequence and re-exporting will restore the missing frame(s). You can also use dumpster to edit the QT metadata, but this is also a one-file-at-a-time process.
Hope this helps -
Max

How to recover sony ARW files deleted by Aperture after importing?

I imported some Sony RAW photos (in .ARW format, shot by Sony Nex 6) from a SDXC card into Aperture library with my MacBook Pro, and as usual I let Aperture deleted the files on the SDXC card (i.e. I did not deleted the files using Finder). Unfortunately I accidentally deleted the imported ARW files (as masters in the Aperture library) by Carbon Capy Cloner (I made a copy in the wrong direction after editing the photos). Now I am trying to recover those ARW files. I used several Photo recovery software but they do not recognize any deleted ARW files on the SD card (nor on my hard drive). The best result was from Stellar Phoenix Photo Recovery software, which recognizes those deleted ARW files as NEF files but the size of each photo is only 32KB (it shows the photo in its preview). I recovered them, but no software can open those 32KB NEF files. It appears to me that Aperture somehow deleted the ARW files on the SD card in a way (very different from Finder deletion) that photo recovery software can't recognize them. Any suggestions? Thanks in advance.

Yes I understand that trying to recover from my HD is more difficult, so my attention is on the card now. In fact, I tried to use Stellar to recover from the HD as well and I got tons of other photos and non of them is ARW.
I have kept both the HD and the card not being used anymore (I stopped using it right after I made the copy in the wrong direction, and the card is not being used after Aperture deleted the photos), so the data should be there. I tested with Stellar on a new card. I shot some ARW photos and format the card on my NEX 6 camera, then try to recover them with Stellar. Same result: no ARW files, only NEF files of size 32KB or less (the photos in the preview are correct). Strange. I tried Remo software, no ARW either, not even NEF files. I guess I am using the wrong recovery software (although they advertise that they recover ARW files). Is there any recovery software that DOES recover ARW photos shot by Sony NEX 6?

Address Book / iCloud Deletes Imported Contacts Shortly after Import

I ran into a incredbily frustrating problem recently whereby attempting to restore a backup of my Address Book resulted all my contacts being deleted once I reconnected my computer to the internet and my Address Book began syncing with iCloud. I wasn't able to find a solution here but I was able to eventually find one online. I thought it was worth sharing.
Upon exporting a backup of your Address Book you have the choice of slecting to export the Backup as a "Address Book Archive" or as "vCard". If you select "Address Book Archive" and are syncing with iCloud when you attempt to reimport your backup, after about 15 to 30 seconds, iCloud will delete all of the Contacts you've just imported.
Exporting a "Address Book Archive" creates a ".abbu" backup file whereas exporting as a "vCard" exports a ".vcf" backup file. Apparently iCloud doesn't like ".abbu" backup files, but if you didn't know that and you're trying to import your backup contact file you're pretty much screwed!
To get around this problem do the following:
1) Disconnect your computer from the internet
2) Import the "Address Book Archive" ".abbu" backup file into your Address Book
3) Select "All Contacts"
4) Select, File > Export > Export vCard...
5) Save the file to your Desktop
6) Reconnect your computer to the Internet
7) Select "Import"
8) Select the ".vcf" file that you just saved to your Desktop.
Importing your backup as a ".vcf" file will prevent iCloud from deleting all of your contacts upon syncing.
... at least it did for me ( :

I had the same problem on both my iPad & iPhone. I adding a contact on my iPad and now everything seems to sync properly. Hmmm, interesting..... THANKS FOR THE SUGGESTION.

Aperture file tripled in size after importing iPhoto

My iPhoto folder is 43GB and contains 20K images. When I imported into Aperture my aperture file grew to 120 GB. I deleted the albums in aperture which contained duplicate files, but my aperture file is still 120GB. Why is this and how can I get it down to 43GB. BTW, my aperture library shows 20K images so I don't understand why my file size is so large. Thanks.

what type of files ???
do you have previews turned on ???
what size and res of previews ???
it is possible but a 300% increase is not likely ...
what is telling you 120GB ???
Message was edited by: tidysteve
btw ... if you use a managed library it will never be the same size as all your photos ... always bigger ... thumbnails, sidecar files, previews, etc all take up space ...

Videos deleted shortly after importing

Hello everyone,
I'm trying hard to migrate my photo collection from iPhoto (and eventually Aperture, which I still use for professional work) to the new Photos app.
What I have noticed, though, is that, besides all photos from iPhone being imported rotated 180°, which is (annoyingly) fixable by hand, Photos will just delete videos from its catalogue. Needless to say, they open fine in iPhoto.
Basically:
On first launch (or consequent start-ups of the app when deleting the Photos library), Photos asks to import a library.
It goes through the import process.
All files are imported correctly (besides the 180° issue), including videos, which play back normally.
Under Preferences, I set the library as System library (in case I deleted the previous Photos library), and turn on the iCloud Photo Library feature.
Somewhere along the process, when I try to access some videos, it says "Photos can't reproduce the file" (translation from my OS X language). In some other videos, a small progress wheel appears on the bottom right, and gets stuck at about one quarter.
I have also tried to import everything by opening manually the "Masters" folder in the old iPhoto library, but then, Photos will give an error regarding duplicate files.
Honestly, all these problems are so un-Apple-like. I'm very frustrated; I've tried to give Photos a chance, but I can't even START using it.
Any suggestions?

Sorry, wrong section; please delete.

Fuiji RAF pictures are not shown in LR6 after import.

All Metdata is there but Histogram shows "data are calculated...". In LR5 imported pictures are shown in LR6. Does someone know what I Need to check?

I guess you mean this Icon Actually it means that the Picture is synchronized with LR mobile, but did not sync These Pictures, but had them uploaded on my iPad while I was travelling. Will do new Pictures and see what happens, when I Import These in LR w/o checking them before on my iPad.

Can I delete/remove files from my iPhone after importing into LR?

Stoked to be able to pull photos and video from my iPhone via LR and skip iPhoto. But it didn't give me the option to 'move' the photos just to copy them. So now I have them all on my laptop but need to delete them from my iPhone to make more room. Deleting on the iPhone is a tetious one by one (checkmarking them) process. Any ideas?

It can't be done by any LR option. You can do it be means of a script, and Rob Cole (often posts here) has written one. Not sure if he's made it available to others.
This has been much discussed, and you'll find a strong polarisation between people like Rob, who think it remiss of Adobe not to include "move" as an option, and people like me that think it a dangerous feature, and shouldn't even be an option!

SCCM/WSUS issue after importing March CSA patch bundle

Hi, I am having an issue with security patch deployment since Tuesday night. Debugging is ongoing. I am running SCCM 2012 CU2.
Coincidentally, the problem appeared shortly after importing the March XP CSA (Custom Support Agreement) patch bundle into SCCM. From the client end, WUAHandler.log reported continuous failures/retries. On lower-end machines, system performance
became very poor. From the server end, starting up the Windows Server Update Services mmc (yes, I know you're not supposed to be doing anything in here, which I'm not) results in a connection error. The detailed error message is shown further down.
It was difficult to get the client machines to stop "thrashing" per WUAHandler.log. It wasn't until I de-installed/re-installed WSUS and ASP.NET that things quieted down yesterday afternoon. All appeared to be stable until this morning
when I re-added "Windows XP Custom Support" under the SUP Component Properties tab, imported the CSA bundle info, initiated a CAB synchronization from Microsoft, and re-enabled Software Updates on the clients.
Again, I would get the error when starting up the Windows Server Update Services mmc.
I am doing everything again, but this time one step at a time. My working theory is that there is some kind of corruption caused by the CSA import (this worked just fine up until Feb.). A few hours ago, Microsoft published a new CSA
patch bundle because a patch was apparently forgotten. Is it possible that there was some kind of corruption included with the original bundle published on Tuesday?
I will post what I find as a result of my debugging.
Thanks,
Nick.
The WSUS administration console was unable to connect to the WSUS Server via the remote API.
Verify that the Update Services service, IIS and SQL are running on the server. If the problem persists, try restarting IIS, SQL, and the Update Services Service.
The WSUS administration console has encountered an unexpected error. This may be a transient error; try restarting the administration console. If this error persists,
Try removing the persisted preferences for the console by deleting the wsus file under %appdata%\Microsoft\MMC\.
System.IO.IOException -- The handshake failed due to an unexpected packet format.
Source
System
Stack Trace:
   at System.Net.Security.SslState.StartReadFrame(Byte[] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.StartReceiveBlob(Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ForceAuthentication(Boolean receiveFirst, Byte[] buffer, AsyncProtocolRequest asyncRequest)
   at System.Net.Security.SslState.ProcessAuthentication(LazyAsyncResult lazyResult)
   at System.Threading.ExecutionContext.runTryCode(Object userData)
   at System.Runtime.CompilerServices.RuntimeHelpers.ExecuteCodeWithGuaranteedCleanup(TryCode code, CleanupCode backoutCode, Object userData)
   at System.Threading.ExecutionContext.Run(ExecutionContext executionContext, ContextCallback callback, Object state)
   at System.Net.TlsStream.ProcessAuthentication(LazyAsyncResult result)
   at System.Net.TlsStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.PooledStream.Write(Byte[] buffer, Int32 offset, Int32 size)
   at System.Net.ConnectStream.WriteHeaders(Boolean async)
** this exception was nested inside of the following exception **
System.Net.WebException -- The underlying connection was closed: An unexpected error occurred on a send.
Source
Microsoft.UpdateServices.Administration
Stack Trace:
   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)
   at Microsoft.UpdateServices.Administration.AdminProxy.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.AdminApiAccess.AdminApiTools.GetUpdateServer(String serverName, Boolean useSecureConnection, Int32 portNumber)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.GetUpdateServer(PersistedServerSettings settings)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServer()
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.ConnectToServerAndPopulateNode(Boolean connectingServerToConsole)
   at Microsoft.UpdateServices.UI.SnapIn.Scope.ServerSummaryScopeNode.OnExpandFromLoad(SyncStatus status)

Yes, WCM.log showed the same 503 error starting on the Wednesday morning at 2:53am, and I also noticed wsuspool had stopped. My most noticeable symptom was the thrashing of wuahandler.log on the clients, causing poor system performance on machines with 2gb
of memory. Multiple de-installs/re-installs of WSUS failed to clear the issue until we increased the memory setting in IIS.
Nick
WCM.log:
System.Net.WebException: The request failed with HTTP status 503: Service Unavailable.~~   at Microsoft.UpdateServices.Administration.AdminProxy.CreateUpdateServer(Object[] args)~~   at Microsoft.SystemsManagementServer.WSUS.WSUSServer.ConnectToWSUSServer(String
ServerName, Boolean UseSSL, Int32 PortNumber) $$<SMS_WSUS_CONFIGURATION_MANAGER><03-11-2015 02:53:26.225+240><thread=30872 (0x7898)>
Remote configuration failed on WSUS Server.~ $$<SMS_WSUS_CONFIGURATION_MANAGER><03-11-2015 02:53:26.226+240><thread=30872 (0x7898)>

Where is eject card after import in lightroom 4.1?

where is the "eject card after import" in lightroom 4.1?
'Devices', which is under 'Sources' (for import) has dissapeared, and only 'files'shows, The 'eject after import' phrase and it'scheckbox has vanished.
How do I get it back?
Thanks
Steve

The Eject checkbox is available when the device is selected from the 'From' drop down menu. See below screenshot

Deleting Camera Images after Importing

Hi there..
Can someone tell me if there's a setting in Aperture 2.1.2 that allows you to delete the image files on the camera after importation. This facility was available in iPhoto and now that I have upgraded to Aperture I really miss this feature as it's not obvious how it can be done... even if it can be done..?? It's a real pain having to manually delete the photos from the camera over and over.
I'm using a Canon 450D.
Any help or suggestions.... most welcome.
Regards,
Anthony

Reformat the card in-camera after backing original image files up on the computer. It only takes a few seconds. The workflow as described below in an earlier post uses my preference, a Referenced-Masters Library, but could also be used with a Managed-Masters Library .
I feel pretty strongly that card-to-Aperture or camera-to-Aperture handling of original images puts originals at unnecessary risk. I suggest this workflow, first using the Finder (not Aperture) to copy images from CF card to computer hard drive:
• Remove the memory card from the camera and insert it into a memory card reader. Faster readers and faster cards are preferable.
• Finder-copy images from memory card to a labeled folder on the intended permanent Masters location hard drive.
• Eject memory card.
• Burn backup hard drive or DVD copies of the original images (optional strongly recommended recommended backup step).
• Eject backup hard drive(s) or DVDs.
• From within Aperture, import images from the hard drive folder into Aperture selecting "Store files in their current location." This is called "referenced images." During import is the best time to also add keywords, but that is another discussion.
• Review pix for completeness (e.g. a 500-pic shoot has 500 valid images showing in Aperture).
• Reformat memory card in camera, and archive originals off site on hard drives and/or on DVDs.
Note that the "eject" steps above are important in order to avoid mistakenly working on removable media/backups.
Also note with a Referenced-Masters Library that use of the "Vault" backup routine backs up the Library only, not the Masters. Masters should be separately backed up, IMO a good thing from a workflow and data security standpoint.
-Allen Wicks

In Imovie 2011-Trying to image capture my project but it comes up after 10 hours- The project could not be prepared for publishing because an error occurred. File already open with write permission. Hopefully someone can help me.

In Imovie 2011- Trying to image capture my project but it come up after 10 hours of rendering- The project could no be prepared for publishing because an error occured. File already open with write permission. Please Help!

oh and ive tried publishing to almost everything. straight to idvd, to media browser, i tried both hd qualities and also the large quality. no luck with any of those

I am running windows 7 on a dell desktop. PDF files freeze shortly after opening or tryiong to print. Only the PDF freezes all other functions remain normal. I can close the PDF. I have an HP officejet pro 8600

I am running Windows 7 on a Dell desktop. PDF files freeze shortly after opening. No other programs freeze. I can close the PDF file. I am using a HP Officejet Pro 8600

Hi Duncan,
Please confirm if you Are using Acrobat.com online services or Acrobat software?
Regards,
Rahul

Captured AVI type2 files shown up short after imported in CS3 PremierePro

Similar Messages

Maybe you are looking for