Captured Screen pauses after a few seconds in slide

Hi, i'm currently working on a basic Captivate project using slides with screen captured
video (.swf files).  Everything is working fine however when
I preview the project the video keeps pausing after a couple of seconds, to start them again I need to hit the play
button, anyone know how to just make them play without pausing when the slide is loaded.  Any advice would be great, many thanks!

Hi, found the problem, one of the slide buttons had 'pause after 1.5 seconds' applied to it, which obviously paused the slide and the slide video.

Similar Messages

  • My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    My screen freezes after a few seconds on my iphone 5c and the display fades slightly so you can see faint lines in the background. I'm not sure whether this is easily fixable or a major problem. Have reset the device, but this has worked. Any ideas?

    To make sure that this is not software related, set it up as new device, explained in this article:
    How to erase your iOS device and then set it up as a new device or restore it from backups

  • My ipad stops after a few seconds, says slide to power off/cancel.  What is the problem?

    What could be wrong with my ipad?  it stops after a few seconds with "slide to power off" noted. 

    Settings are OK, but the internal power supply is on the verge of failure. Soon, you will not be able to turn the Time Capsule on at all after it turns off.
    Take the Time Capsule to an Apple Store....if you have one near you....to discuss your options.
    Otherwise, contact Apple Support.
    http://support.apple.com/kb/HE57

  • Pauses after a few seconds???

    Hello,
    We bought our daughter a Ipod for Christmas and have a question. I tried to call Apple but ws told to call back later...so I thought I would try here.
    Everytime she starts to play a song, it pauses automatically after just a few seconds. It will not play even half of a song. Is there a setting or somthing that need to be changed?
    Any help is greatly appreciated!

    Anyone??? I still haven't been able to get through to Apple.
    Any suggestions would really be appreciated!
    Thanks!
    -Michele-

  • Remote desktop connects, black screen, disconnects after a few seconds

    I have several servers running Windows Server 2012 R2. These servers are used for testing, and are members of a domain which has two DCs, each of which are running DNS Server.
    Yesterday I noticed one of the servers was having an issue with its remote desktop connection. If I try remoting into this machine, it connects to a black screen, sits there for 2-3 seconds and then promptly disconnects. No error message is given. I tried
    this from a couple different Windows 7 machines, and got the same result. I tried from my wife's iMac, which runs Jump Desktop, and too was met with the same result.
    I can, however, remote into this machine via RDP from my work-issued laptop, which is running Windows 8. However, I cannot remote into the problem machine via Remote Desktop Connection from one of the 2012 R2 servers--I am met with the same result as the
    other machines: connect, black screen for 2-3 seconds, disconnect without error.
    I can remote into all of the other 2012 R2 servers without issue from any machine, including the iMac. I am experiencing this problem on one server only.
    Since it is a test server, I reinstalled Windows from scratch this morning. This meant formatting the SSD and wiping everything out. I reinstalled the drivers, joined the server back to the domain and installed all of the updates available from Windows Update.
    And rebooted. And yet, the problem persists!
    I tried troubleshooting the "usual suspects," like turning off Windows Firewall, disabling antivirus software (currently none installed), disabling IPv6, setting a static IP instead of using DHCP, etc. I did notice the network adapter said it was
    on a Network, not a Domain Network. I corrected DNS settings, and the network reidentified itself as being on the ParietalBone.net network. And yet, the problem persists. Remote Desktop to this server still yields a black screen for 2-3 seconds, followed by
    a disconnect--EXCEPT from the aforementioned Windows 8 machine.
    I looked in the TerminalServices-LocalSessionManager log on the offending server, and there are no errors. I only see repeated entries that say "Session X has been disconnected, reason code 12," where X is 1 or 2. On a couple occasions, the reason
    code is 11. But I don't see any errors indicating a breakdown in security negotiation.
    Without any robust logs or debug details, I'm at a loss of where to look for a solution.

    I am cautiously optimistic that this may have been resolved.
    The network card in the computer was only a 10/100 built-in card, so I replaced it with a 1Gbps card. Interestingly, this did NOT resolve the issue. I ran netsh to check on the state of the chimney offload, but it was already disabled.
    In the network card properties, I changed the link speed and duplex from automatic to 1Gbps full, re-ran "netsh int tcp set global chimney=disabled" and rebooted. The problem persisted.
    And so I went to the network card properties and set IPv4 Checksum Offload, Large Send Offload (three of these -- IPv4, v2 IPv4 and v2IPv6) and TCP Checksum Offload (IPv4 and IPv6) to Disabled. Jumbo Frames were also disabled. I rebooted again.
    After the subsequent reboot, I was able to connect to this Server from machines that previously gave me difficulty. The only machine I haven't been able to test today (I'm in the office) is my wife's iMac, which is at home. However, I was able to bring this
    server up via Jump Desktop on my iPad, so I'm suspecting that perhaps one of the offload options was to blame. I'm not sure why this would allow me to connect from some machines but not others. And as noted above, I have many other machines running Server
    2012 R2 and they are NOT experiencing this problem. And I've not done any tinkering with network settings on any of them, so their chimney and offload settings are all in the default configuration.
    Regarding the other items -- NIC team, virtual machine, etc. -- there was no NIC team, no SRIOV and no RDMA involved.
    I had to turn IPv6 off on this machine, and only on this machine, because having it enabled was causing a lot more problems. DNS registration would keep failing, it couldn't pull Group Policy, it couldn't get time sync with the DC, etc. The servers are all
    set up with static IPv4 addresses. The router supports IPv6 but I'm not actually using it, so disabling IPv6 wasn't a concern to me.

  • Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.

    Ipod touch 4th gen needed a new screen and sleep/wake switch.  So, I replace them.  I was able to get to settings and do "erase all content and settings".  I am not able to totally shut this device off as it keeps restarting after a few seconds.  I have used itunes to restore and also recover.  Device will actually shut off and stay shut off if I leave it connected to the computer.  The moment I unplug (3 seconds) the apple logo appears, it boots, unlock screen appears, I can unlock and operate normally, unplugged or not.  Just cant get it to completely shut down unplugged.  Any thoughts?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer                            
      - If still not successful that usually indicates a hardware problem. Maybe you installed a bad component or damaged something during the repair/replacement.
    Apple will not help since you worked on the iPod yourself.

  • After iOS7 update I cannot launch the music app. It crashes after a few seconds of white screen. What to do?

    Just updated my iPhone 5 (16g) to iOS7 and now I cannot launch the music app anymore.
    It opens and then just crashes after a few seconds of white screen.
    Also If I go to Settings General About the phone crashes all the time after just a few seconds. :-(
    Andreas

    The same for me. iPhone 4S, itunes match and upgrade to ios7 by air.
    So what we have:
    1) Music app does not launch (white screen then close)
    2) About screen crashes (I guess once it tries to calculate music space)
    3) Spotlight does not show any results (no care what I set to search in in the preferences)
    4) iTunes Match slider can not be set to Off. However, it is possible to logout from AppleID, then it off. But this does not change the situaton at all
    5) Podcast app does not launch
    I tried to reboot, to sign in with another Apple ID, to turn off itunes Match, to reset all preferences. Nothing helps.
    Things to try:
    - reset all preferences and content
    - reinstall ios7 with itunes from scratch
    - switch to windows phone

  • When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity.

    Hi, i have windows 7 hp, sp1. When using adobe flash player, for example, in the game. Screen will fade after a few seconds of inactivity. But the pixels on are highlighted. This is accomplished by installing the latest update flash.If I move the mouse the screen returns. Screen goes from one second to several, and sometimes not at all. Pleas help me

    To give you any useful advice, I'm going to need to know more about your computer and browser:
    https://forums.adobe.com/thread/1195540

  • IPad 2 turns on then after a few seconds the screen goes black

    IiPad 2 turns on then after a few seconds the screen goes black.

    Hi Tsinker,
    I'm sorry to hear you are having issues with your iPad. If your iPad isn't responding or starting up successfully, you may find the troubleshooting steps outlined in the following article helpful:
    If your iPhone, iPad, or iPod touch doesn't respond or doesn't turn on - Apple Support
    Regards,
    - Brenden

  • After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video c

    After applying update my apple tv2 will randomly go to a black screen that lasts for a few seconds. When it gets back to normal after a few seconds it acts like the video never stopped since its farther along in the timeline. This happens with all video content wether its from Netflix or streaming from my iTunes library

    You might try restarting the Apple TV by removing ALL the cables for a 30 seconds. If that doesn't help try using another HDMI cable.

  • Why does the screen shut off and I have to re enter my password after a few seconds?

    WHen I am using my MacBook Air, writing down some notes, the screen shuts off after a few seconds. I have to re-enter my password again. This is happening every few seconds. It is driving me crazy! Help!

    Adjust things here:
     > System Preferences > Desktop & Screen Saver > Start After: > Set the time interval
     > System Preferences > Energy Saver > Battery
     > System Preferences > Energy Saver > Power Adapter

  • I somehow set my toolbar to disappear after a few seconds, making the screen jump, very annoying, how do I set it back so it stays visible all of the time?

    I can't remember where I found the option to make the toolbar invisible until I moved my cursor to where the toolbar usually shows. If I move the cursor again, after a few seconds the toolbar disappears causing the screen to jump up and fill in the space where it was. It is so irritating and I can't find out how to make it visible all of the time.

    You can try to check the '''Options''' for the different '''Extensions''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Starting Firefox temporarily in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] may also help determine if an installed add-on is causing the change.

  • How do I keep the screen light from going out after a few seconds

    How do I keep the screen light from going out after a few seconds on my iphone

    Settings>General>Auto-Lock

  • My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal.

    My ibook G4 display greys out after a few seconds, clicking on the screen returns it to normal functioning.  I have adjusted the delay times before the computer goes to sleep to no avail, so I'm thinking this issue stems from something else.

    Have you tried resetting the PMU? The PMU (Power Management Unit) has control over the sleep function, so resetting it may help if the iBook is sleeping unexpectedly.

  • IChat disconnects after a few seconds and starts to blink the whole screen

    iChat disconnects after a few seconds and starts to blink the whole screen
    this started since I installed Leopard; if I go back to 10.4 it works OK. I got rid of all the plist and it still hangs up. How can I uninstall this. On my laptop it works OK but I installed it with complete erase on laptop; on my desktop I stalled it over the old system.
    error message AIM time out An AIM service error occurred.
    Error: Serv:RequestTimeout
    and you have attemptedto log too often in a short period of time. wait a few minutes before trying to login in again.
    EVEN THOUGH I ONLY TRIED ONCE TO LOG IN.

    If you Archived and Installed then check iChat launches from the Applications Folder.
    If it does that Drag the current (iChat 3) icon off the DOCK and drag iChat 4 to the DOCK.
    8:03 PM Tuesday; December 4, 2007

Maybe you are looking for