Captures fine, creates files, but won't connect to them. . .

I captured tonight this weekly video, 2 50 minute clips, around 9 - 12 gigs on a HD with plenty of space. No capturing probs. Except once I quit the project and opened it up later to work on it, it says it can't find the files (which are in the same Capture Scratch directory with the others). I click on the files, try to open them in Quicktime. Get info says they are QT files and they played fine in FCP before that initial quit and restart.
I've tried reimporting them. It's quite a lot of work to go and recapture and I'm still not sure what went wrong. One of the reasons I hate working with video, but if anyone has any ideas?
thanks
enzosf

I captured tonight this weekly video, 2 50 minute clips, around 9 - 12 gigs on a HD with plenty of space. < </div>
From what? In what format? Inferring you are pulling these from a DVR.
bogiesan

Similar Messages

  • We use an Airport Extreme in my office, which works fine for me. Occasionally we need to have more than one computer running on it, but for some reason it won't connect to the internet. It says we have internet, but won't connect to wifi. What's going on?

    I use my computer everyday in our office and have no issue connecting to the internet/wifi, but when my boss comes in and tries to connect it doesn't work. It tells her she has internet, but won't connect to the wifi. We've tried a few different tactics(the basic ones I've seen on here), but nothing seems to be working for us. My computer automatically connects to our wifi.
    Just recently the Airport Extreme has started with the blinking amber colored light on the front, which I believe means something is wrong? Can anyone help us figure out what's going on and why we can't get my boss' computer to connect as it should?
    Thank you!

    Here's an update:
    Now the light is not blinking. It's a solid, consistant green. I don't know if it helps to narrow it down or anything, but I just figured I'd mention it.

  • Ipad pages won't open any documents, it lets me create one but won't open it

    Basically the title says it all
    Ipad pages won't open any documents, it lets me create one but won't open it
    I have updated it last night, but the same problem was happening yesterday afternoon
    iPad 2  - I bought it March 2012

    Check the following settings:
    1. Settings>Pages>Use iCloud>On
    2. Settings>iCloud>Documents and Data>On

  • Updated to ios7. 1 and phone wants to connect to iTunes but won't connect, please help

    Phone requests but won't connect to iTunes after crashing during 7.0.2 update,

    Same thing here Phil cant seem to sort it! have you managed?

  • I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad

    I have video embedded in a PDF, it plays fine on desktop but won't play on iPhone or iPad, is there a workaround? From what Ive seen through Google searches, I dont think there is but wanted to reach out to the pros.
    thank you for your help!!

    Read this:
    http://forums.adobe.com/thread/982072?tstart=0

  • My iphone 4 sees my printer, but won't connect.

    My iphone 4 sees my printer, but won't connect. Connect icon just keeps spinning!

    Is your printer supported by airprint:
    http://support.apple.com/kb/HT4356

  • My hotspot won't connect my computer to the internet since I upgraded my phone to ios7. The PC sees the hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone help?

    My hotspot won't connect my PC to the internet since I upgraded the op sys on the 4s iphone. The PC sees that hotspot but won't connect. The op sys on the PC is windows 7 ultimate. Can anyone tell me what to do please?

    Glad to hear it is all straightened out. You are right about the upgrade cost. That is one reason why Adobe switched to monthly licensing—no more upgrade cost <g, r, & d>. Of course we do have nearly monthly product upgrades. It is almost like playing whack a mole.

  • DVD Studio Pro - Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, instead of going to scripts

    - Why is it so easy to create stories, but you cannot group all them together for a simple PLAY all scenario, surely it can be done? I am about to give scripting a shot but seriously it looks way to confusing compared to stories, I have several sub menus and in each sub menu I have a play all story, however what I also want to do is create a PLAY ALL from the main menu, any suggestions
    Erby60

    Duplicate all your stories, have a menu item with duplicate story 1 as the target, and set the end jump of duplicate story 1 to duplicate story 2, etc.  Shouldn't that work?   There may be a simpler way, but
    As far as adding documents, The simplest way is to build in dvdsp and then add a folder containing the docs to the project folder that dvdsp has created and use toast to burn it.   There may be a rule for naming this folder, but can't remember it at the moment.
    Hey, ya know there's something called the dvdsp manual.  A quick search found this
    In addition to the VIDEO_TS or HVDVD_TS folder, there are other items that can be part of the format process:
    A folder specified by the DVD-ROM content setting
    DVD@CCESS Installers
    You can change or set the folder to use for DVD-ROM content either when specifying the preformat settings or while configuring the format process. The DVD@CCESS Installers are included if the project used DVD@CCESS links and the Embed Text Data checkbox in the Disc Inspector is selected. See DVD@CCESS for more information on DVD@CCESS.

  • Airport used to work fine, but won't connect to internet now

    Hello. I bought my Macbook pro about two weeks ago and never had problems with my internet connection. I moved last week to another city, and had my wi-fi installed today. My brother has a Powerbook G4 and it worked fine with the new connection, but my Mac won't; it won't connect automatically when I turn the computer on and when I click on "open network preferences", nothing happens. I already got connected by clicking on Network Diagnostic in Safari, but i'd like to do so without going through all that everytime I need to get on the internet.
    Can anybody help me to fix this problem? I'd really appreciate that. Thanks in advance.

    Tell us about your network. How are you connected to the internet? Cable modem, DSL?... Is there a router involved? Which one is it? System Preferences>Network>Show:Airport>TCP/IP are you getting an IP address?

  • IMac sees the ethernet but won't connect to the internet

    we had a power outage that crashed the imac.   now it won't connect to the internet.  the imac can see the ethernet connection.   we have several other apple and dell devices that all see the internet so it's not cabling or hardware.    it's a cable modem connection that uses automatic DHCP configuration.  I've created a new Location setting with no change.   I'm assuming that there is a corrupted file since all the other systems connect fine.  any idea which one it may be or what else I should be looking for?

    Shot in the dark, but did you try an SMC reset?
    SMC Reset
    Shut down the computer.
    Unplug the computer’s power cord and disconnect peripherals.
    Press and hold the power button for 5 seconds.
    Release the power button.
    Attach the computers power cable.
    Press the power button to turn on the computer.

  • My airport extreme shows a green light, but won't connect to the internet.

    I have an airport extreme, and it stopped working one day, so I reseted it and it's not connecting to the internet now.  It's showing a green light, however, it won't connect to the internet. I live in an apartment complex, so I don't have a cable modem. The router is directly connected to the wall via ethernet. I had the ports checked by connecting the ethernet cord directly to the computer, and the internet is working fine. I tried resetting the router, but it still doesn't connect.

    Your problem is typical Yosemite network.. just reboot the Time Capsule.. no luck reboot the network.. do a restart in correct order.. modem.. wait 2min.. TC .. wait 2min.. clients.
    No luck then do a full reset of the TC and setup in a way that Yosemite can cope with.
    Start from a factory reset. No files are lost on the hard disk doing this.
    Factory reset universal
    Power off the TC.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the TC to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
    N.B. None of your files on the hard disk of the TC are deleted.. this simply clears out the router settings of the TC.
    Setup the TC again.
    Then redo the setup from the computer with Yosemite.
    1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
    eg TCgen5 for basestation and TCwifi wireless name.
    If the issue is wireless use TC24ghz and TC5ghz with fixed channels as this also seems to help stop the nonsense. But this can be tried in the second round. ie plan on a first and second round of changes to fix this.. hopefully.. I will point out other steps that can be round2.
    2. Use all passwords that also comply with 1. but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
    3. If the TC is main router you can skip this point. This is only an issue when the TC is bridged.
    Ensure the TC always takes the same IP address.. you will need to do this on the main router using dhcp reservation.. or a bit more complex setup using static IP in the TC. But this is important.. having IP drift all over the place when Yosemite cannot remember its own name for 5 min after a reboot makes for poor networking.
    4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric.. but this change will mess up your TM backup.. so be prepared to do a new full backup. Sorry.. keep this one for second round if you want to avoid a new backup.
    5. Mount the TC disk in the computer manually.
    In Finder, Go, Connect to server from the top menu,
    Type in SMB://192.168.0.254 (or whatever the TC ip is which you have now made static. As a router by default it is 10.0.1.1 and I encourage people to stick with that unless you know what you are doing).
    You can use name.. SMB://TCgen5.local where you replace TCgen5 with your TC name.. local is the default domain of the TC and doesn't change.
    However names are not so easy as IP address.. nor as reliable. At least not in Yosemite they aren't. The domain can also be an issue if you are not plugged or wireless directly to the TC.
    6. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only. Do the same for ethernet if you use it.
    There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
    You might need to do some more work on the computer itself. eg Reset the PRAM.. has helped some people. Clean install of the OS is also helpful if you upgrade installed.
    Tell us how you go.
    Someone posted a solution.. See this thread.
    Macbook can't find Time Capsule anymore
    Start from the bottom and work up.. I have a list of good network practice changes but I have avoided Yosemites bug heaven.
    Yosemite has serious DNS bug in the networking application.. here is the lets say more arcane method of fixing it by doing a network transplant from mavericks.
    http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/
    Same thing applies to the Airport Extreme or the Express if used as router.. just replace TC in the instructions with AE.

  • Computer detects router but won't connect online - help

    I came home from work and all of the sudden my computer wouldn't connect at all to anything. We have another computer on the network which I'm using to send this message and it works fine, but mine won't connect. It detects the router and everything is connected- all the numbers come up in the Network preferences like it always does...IP, ethernet, etc., but nothing will connect to the internet or AIM. Anybody know what the problem might be? Can my ethernet card be busted, or disconnected or anything that would cause the computer to locate the router but not actually connect? Any help is appreciated- thanks.

    I have a similar problem. Sometimes I get a brief connection, but even then it is extremely slow and I get time out errors.

  • How to create file type source system connection

    Hi All,
    I have to load data from Flat files , but when i checked the source system connections File type source system connection is not present. Please guide me how can i create the same.
    Apoorva

    Hi Apoorva,
    Goto RSA1 -> Source System -> Right Click on File Folder .-> Create -> Logical system Name as FLAT FILE -> Source system name is the description for this source -> Enter.
    Once it is created you can right click from that file and check whether it has created properly or not.
    When u r moving the objects which are created under this source, the same flat file source should have been created in the target system also. And check for the entry in the target system table RSLOGSYSMAP for the flat file when u r moving the flat file objects.
    Regards,
    Muthu.

  • Card info on file, but won't let me purchase in app crystals for game.

    So I have already purchased something from the market and cc is on file but when I play this game heros of chaos and try to by crystals it confirms password sakes me if I'm sure I click yes but purchase won't go through, any thoughts?

    Apple is not reporting any problems:
    http://www.apple.com/support/systemstatus/
    Can't connect to the iTunes Store
    Best Fixes for ‘Cannot Connect to iTunes Store’ Errors | iPad Insight

  • VPN - Installed but won't connect

    Hi all,
    I've configured VPN in Server Admin and it's on.  I've installed the config file.  When I try to connect to it I get the following message:  The L2TP server did not respond.
    This is the first time I ever setup a server so please be patient and help me.
    Lubna

    I just installed FaceTime on my MacBook Pro running OS 10.6.7.  It comes so I can see myself but won't accept my log in.  Anybody else have this problem?
    Thanks for the info, but as far as I can tell, neither PeerGuardian or LittleSnitch is on my computer, but I'm don't know how to check for sure...

Maybe you are looking for