Capturing 24pA off tape and P2 cards: different compressors

We are running a test to find if we can mix our DVCPRO HD 24pA footage that was shot both on P2 and on DVCPRO HD tape into the same timeline successfully.
When we log and transfer the P2 media, its compressor is DVCPRO HD 1080p30. But when we capture the footage off the tape, its compressor is DVCPRO HD 1080i60, despite our Easy Setup being set to have the compressor be DVCPRO HD 1080p30. All other properties are the same, compressor is the only difference (both are 23.98fps, 1280x1080 frame size). Anyone know why the compressors are coming in different? Can I force the tape media to capture with the 1080p30 compressor instead of 1080i60?
Thank you.

Been looking into this more and it appears FCP defaults to compressor 1080i60 once our deck is hooked up (AJ HD 1400). Otherwise our Easy Setup of DVCPRO HD 108024pA defaults to compressor 1080p30. That must be why P2 comes in with one compressor and tape-digitized media comes in as the other.
Now my question is: how to make the deck allow capture using the 1080p30 codec or if it's not possible, is mixing 1080i60 and 1080p30 compressors on same timeline no big deal? (All other properties are the same: frame rate, dominance, size. The compressor is the only difference).

Similar Messages

  • I would appreciate some help in capturing some VHS tapes into PP-CS6.

    Aloha,
    Just loaded CS6 and my 1st project is to convert some VHS tapes into HD DVD's.  The VHS player I'm using has R/G/B Component video out & HDMI in/out.  My PC video card is a Radeon 6750 with 1 x HDMI (in use for my monitor), 1 x DVI-I, and 1 x D-SUB.  My mobo, a Gigabyte GA-MA78GN-US2H, has 1x D-SUB, 1 x DVI-D, & 1 x HDMI. I don't believe I can use both HDMI slots simultaneously.  I'm not even sure I can use any of the onboard graphica ports while I'm using an external  video card.
    So my questions are; 1) which available graphic port on the video card will offer me the best VHS tape capture?  2) what are the capture settings (i.e. frame rate & resolution of most VHS tapes either home recorded or professionally recorded) that I should use?
    Mahalo-n-aloha from the big Island where the water is always warm and clear, and where now (Jan-March) the Humpback Whales play.
    konadon

    Usually, video ports on a video card or motherboard are out only. You would need a capture card, or external box to get VHS video digitized into your computer.
    For VHS tapes, I would recommend getting a Hauppauge HD-PVR available here: http://www.hauppauge.com/site/products/data_hdpvr.html
    It would save you a lot of headaches and make your job much easier.
    If you'd like specifics: the HD-PVR has component inputs with optical audio, along with S-video and composite connections.
    I've used it to capture many VHS tapes, and never had a problem.
    Good luck!

  • Capturing 24pa Problem

    Hey everyone,
    I recently setup a batch capture for some 24pa footage. My presets were set as:
    Capture - DV NTSC 48kHz Advanced (2:3:3:2) Removal
    Device - DV NTSC Basic 23.98
    For some reason, all of the clips that captured into my browser have a vidrate of 29.97 and I need to do a manual pulldown removal from the tools menu. I've searched this problem and found a few others who've experienced this but no answer as to why.
    I've never seen FCP ignore the capture settings. Any thoughts?
    Thanks In Advance (no pun intended)!
    ~Athen

    can you elaborate on what sort of device your
    capturing from and what the device control is;
    firewire or other?
    I sure can elaborate! The device is a DVX100a (I've told the company they need to invest in a VTR deck to save the camera playheads). The device control is firewire.
    have you changed or installed anything new since you
    last did this procedure successfully?
    Well, the problem is this all part of that OTHER situation I had with the kid who captured the footage wrong. The settings in the camera haven't changed, and I've changed the capture and device settings in FCP for the capture. Closed Log and Capture and then reopened to sort of "refresh" it. Batch captured, all at 29.97. I removed the pulldown manually and then saved closed FCP to reboot (again, trying to refresh it). I reopened FCP, went to log and capture, logged another tape and then set the batch capture, still 29.97 in the broswer. Most convert with the pulldown, other have a "break in cadence" and I need to use Cinema Tools to reverse them.

  • I bought a £15 itunes card to download some music on to my iphone but it wont take any money off it and keeps asking for my card details,

    This is the first time i have brought an itunes voucher to use on my iphone, i have been able to redeem it and it shows up on my account but it wont take any money off it and it just keeps asking for my apple id all over agin and for my card details....... slowly loosing the will to live and all the help websites just use all these terms i dont understand, Any help will be much appreciated!!! Thanks

    iTunes Store Support
    http://www.apple.com/emea/support/itunes/contact.html

  • When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    When we purchase from iTunes the balance is not coming off of the gift cards. We have family sharing on but when my kids purchase songs they are credited to our credit card and not the gift card that is already in their account. What's wrong?

    Hi Angela1313,
    I see that you have a question about using gift cards with Family Sharing. Here is an article with some information that my be pertinent to this issue:
    iTunes Gift balances
    http://support.apple.com/kb/ht5035
    Learn more
    Learn how to send an iTunes Gift or redeem iTunes Gift Cards and content codes. If you're using Family Sharing, the credit you redeem will only be available to you. iTunes Store credit on your account isn't shared with other family members.
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    I stopped using iCloud after another family member received all my contacts. Now I want to restart using iCloud. How do I prevent this happening again? We share the same Apple id password and credit card but different usernames.

    If two of you shared the same contacts you were logged in with the same Apple ID. In order to avoid this you need to use different Apple IDs, and be using separate Macs or separate user accounts on the same Mac.
    One or other of you should create a new Apple ID at http://appleid.apple.com for which you will need a non-Apple email address which hasn't been associated with another Apple ID.

  • HT204053 We have two Iphone 4S but we set each one up with different accounts, how can we share purchased or downloaded music from and iTunes card without purchasing twp different cards?

    We have two Iphone 4s with different accounts, what would we need to do to share music from and Itune card if one of us purchased and the other did not?

    Put all of the music on the computer(s) to which you sync, then sync to your idevices

  • HT4623 iOS 6.1 no longer available because you are no longer connected to the internet- this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.

    this is what my iphone 4 shows. iv tried switching off again and again, closing apps by double tapping the home button but still not working. please help.
    is there any other method to download ios 6.1.2.
    my phone is not being recognized by itunes on my new windows 8. neither its working on touch copy.
    kindly help.
    thanks

    well in thatcase, i need another help .
    thanks for your instant reply.
    i have currently bought a new laptop (windows 8) and my iphone is not being recognized by itunes.
    because i have no backup on my previous laptop, i downloaded touchcopy but even touch copy is not recognizing my iphone.

  • I think i got ripped off by this verizon store , I got the 4 line $140.00 edge plan, which I had to pay for the phone in monthly payment, i did the math it was 268.00 total..  At check out this guy charge me $50.00 care package for each phone and sim card

    I think i got ripped off by this verizon store , I got the 4 line $140.00 edge plan, which I had to pay for the phone in monthly payment, i did the math it was 268.00 total..  At check out this guy charge me $50.00 care package for each phone and sim card which was $10.00 , $25.00 set up with TCP and he said the rest was tax.  I had to pay $474.36.. my brother went to costco and did the same verizon deal he didn't have to pay anything...

    Welcome to this forum.
    This is a customer to customer forum only, where forum members, who are only BT customers, can help each other with BT Retail products and services.
    Anything you post here does not go to BT. Although the forum is moderated by BT, not all posts are read.
    I have asked a moderator to provide assistance, they will post an invite on this thread.
    They are the only BT employees on this forum, and are a UK based team of people, who take personal ownership of your problem.
    Once you get a reply, make sure that you are logged into the forum, then click on their name, you will see a screen like this. Click on the link as shown below.
    Please do not send them a personal message, as they may not be on duty for a long time, and your message will not be tracked properly.
    For your own security, do not post any personal details, on this forum. That includes any tracking number you are give.
    They will respond either by phone or e-mail within 5-6 working days.
    Please use the tracked e-mail, to reply, not via the forum. Thanks
    This is the form you should see when you click on the link. If you do not see this form, then you have selected the wrong link.
    When you submit the form, you will receive an enquiry number, so please keep a note of it
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • HT204053 I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

    I put an iTunes gift card into my iTunes app and wanted to use it to buy more iCloud storage. How do I do that? iTunes and iCloud are different accounts. Help

    Not on your own. Click here and ask the iTunes Store staff to put it back onto the card; they'll only do this if none of the balance has been spent.
    (115868)

  • I downloaded the iOS7 and I can't force quit the open apps. I was told, "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it." Comments please & thank you

    I downloaded the iOS7 and I can't force quit the open apps. I was told, "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it." Unfortunately, that didn't work. Any comments please & thank you

    Sorry if I didn't make myself clear. Prior to loading 1OS7 it was easy to force quit applications that were still open by double clicking and seeing an a red "x" you had to click on.
    It doesn't work that way with the new operating system and the instructions that were given "Force-quitting apps is a little different though: Instead of tapping and holding on the icon, you flick a thumbnail up to dismiss it."
    Do not work.
    I am looking for anyone who can help figure this out.

  • Canon 6D display language resets to chinese after auto off and indicates card full

    Just assembled my new 6D  with 24-105 mm and display comes in urecognizable language, after changing into english it reminds me that unused new memory card is full, so I reformat and seems ok... BUT when starting after auto off again the same unrecognizable language and full card !
    I have taken battery out and put in again, reset to default, changed card, and keeps doing the same.
    Any suggestions ?

    It could be the GPS in your camera IF you have been secretly kidnapped in your sleep, and placed somewhere in China, inside a cleverly detailed re-creation of your normal surroundings.  The persons responsible thought of everything BUT the GPS in your camera sensing your true location and resetting the default menu language to Mandarin.
    Investigate this, but very, very carefully.
    Scott
    Canon 6D, Canon T3i, EF 70-200mm L f/2.8 IS mk2; EF 24-105 f/4 L; EF-S 17-55mm f/2.8 IS; EF 85mm f/1.8; Sigma 35mm f/1.4 "Art"; EF 1.4x extender mk. 3; 3x Phottix Mitros+ speedlites
    Why do so many people say "fer-tographer"? Do they take "fertographs"?

  • Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

    Youtube app not working "error tap to retry" on ipad 4. Tried holding home button and off together and delete and download agin both didn't work

    Oh phooey. I had the same problem, so I decided to delete and reinstall. Only to discover that Google's YouTube app no longer supports anything below iOS 6. This is a problem since I'm running an original iPad.
    Yes, I realize that my version of iOS still has the old YouTube app. But it's not the same. For one thing there are a lot of ad-supported videos that will only play in the new app.

  • TS1702 Want to buy some donuts on the Simpsons tapped out game and it is telling me to contact support. I have updated my info and credit card. Help

    Want to buy some donuts on the Simpsons tapped out game and it is telling me to contact support. I have updated my info and credit card. Help

    Contact the app's support, at a guess. Have you?

  • TS1424 Hi. I just added $25 gift card into the redeem in the app store and purchased four different apps for $4.99 each. I was planning on purchasing one more app at $4.99, but showed that I do not have the $5.00 in my redeem. Instead I have only $4.80?!?

    Hi. I just added $25 gift card into the redeem in the app store and purchased four different apps for $4.99 each. I was planning on purchasing one more app at $4.99, but showed that I do not have the $5.00 in my redeem. Instead I have only $4.80?!?!?!?
    Is there taxes that's going on here?
    I feel jipped!

    There will indeed be taxes, assuming you are in an area where sales tax is normally charged.

Maybe you are looking for

  • Turning off auto-correction in pages 5.0???

    Preferences used to have an "auto-correction" section where you could change the  "symbol and text substitution" settings but I cannot figure out how to do that now -- or if I even can -- and would really appreciate some help. Thanks! As a reference,

  • Microphone troubles

    I am running Vista 32bit and have had some microphone troubles in the past few months. Several months ago my mic was working fine on my x-fi xtreme audio sound card. Vista updated one day, and my microphone stopped working. I checked all of the usual

  • HT4759 Problems with outlook 2010 and icloud

    In outlook 2010, when trying to open up icloud calendar or contacts, I keep getting message, "The information store could not be opened". It worked fine until a few days ago.  The only changes I made was to add a new router to my home network.,  Any

  • Trying to install JRE 7u7

    Hello, I'm trying to install JRE 7u7 x64 and am having a few problems. I can run the installer and its fine until it begins to install. Then an error message appears saying: "The feature you are trying to use is on a network resource that is unavaila

  • I want to use Bridge as my managing tool but everything is in iPhoto!

    I'm a new to this. MacBook Pro OS X, version 10.9 iPhoto 9.5.1 Adobe Bridge CC 6.0.1.6 I dig Bridge's interface. iPhoto's...not so much. Unfortunately, I imported everything into iPhoto. I just purchased my laptop in December....and feel like the ele