Capturing 4 Ch Audio from XL-H1 using FW?

Hello,
I was wondering if anybody had come up with a way to capture all 4 channels of audio from an XL-H1 using FW.
My understanding is that you can't capture 4 channels at once over FW, but is it possible to capture the tape getting channels 1 and 2, then capture the tape again getting channels 3 and 4. In the XL-H1 AUDIO SETUP menu it doesn't look like it has this option.
So, is there a way to make this happen, or am I going to have to either buy an HDV deck or an HD/SDI card for my tower?
Thanks for your help,
B.Kirwin

Quicktime 7 did away with the 2 channel limit I thought? Because I can capture DVCPRO HD via firewire and get 4 channels. Not sure about that camera and HDV...not my bag.
Shane

Similar Messages

Capturing audio from telephone for use in FCP

My requirement is quite specific, and so far none of previous posts seem to answer my question. So...
I'm looking to capture audio from my telephone for use in FCP. It won't be a telephone conversation, but a voice text. In other words, an SMS sent to a landline. The audio is saved as a voice message on the answer machine. My phone / answer machine is fairly basic - it has a speaker and the only ports it has is for power and the telephone line itself. I have tried a very basic method of playing the message on speaker and capturing it on a mini DV - but that results in too much audio edit to get it to sound acceptable. My Mac is a G5 and I have the full FC studio, but just not sure of best way to get audio onto the Mac without losing too much of the sound quality.
Any suggestions?
Many thanks all...
Kirsten
iMac G5
iMac G5

you need a telephone audio interface like the products made by the fine folks at gentner, telos or jk audio. i have a celltap from jk audio, works very very well. http://www.jkaudio.com/celltap.htm

Tactic 3D Sigma - No audio from right side using USB?

Just got my new Creative Sound Blaster Tactic 3D Sigma (phew, that's a mouthful) headset in the mail today. When I connect it to my laptop using the USB adapter, there is no audio from the right side, only the left. When I connect using analog, though, the headset works fine.
I'm on Windows 7 Professional 64-bit, and I have the latest Creative software and headset drivers installed.

Hmmm... sounds like something is wrong with the USB adapter. Did you purchase the headset direct through Creative Online Store or from your local electronics store? If you bought the headset from your local electronics store, please get in touch with them right away, these stores usually have a 30 day exchange policy.
If you purchased this through the Creative Online Store, please write to our Customer Support and ask for an RMA (Return Merchandise Authorization).

Capture mail with Attachment from POP server using PL/SQL

Hey guys,
With the help of this forum and Billy I am able to capture the email from POP3 server and display it to the user. But my query is how can I get an Attachment from the email using PL/SQL's UTL-TCP method ? Right now it displays some encrypted code.
Thanks.

Hey guys,
With the help of this forum and Billy I am able to capture the email from POP3 server and display it to the user. But my query is how can I get an Attachment from the email using PL/SQL's UTL-TCP method ? Right now it displays some encrypted code.
Thanks.

No audio from second Channel using Webcam Capture with ASIO source

I am trialing elements version 10 as I am looking for a capture / recording / editing solution for making music videos. I want to be able to record from my webcam and also record two audio streams silmutaneously.
I am using a logitech webcam pro 9000 and a line6 Ux2 Audio recording Sound device. The UX2 is an ASIO compatible device that allows two streams to be recorded; in my case guitar and Microphone for voice. I am able to do this in ASIO comaptible audio editing software.
So I have tried selecting the Audio device settings prior to starting a capture but each time I start a capture the audio device reverts to standard windows Realtek audio device. I then select the Line6 Device in the capture window and procede to record but I only get video and one audio channel. Is there a way to record live from webcam AND get both audio channels using ASIO driver?
Cheers
Greg

Only if your camcorder records in stereo. Otherwise, you will only get one channel of audio and you will need to use the Fill Left or Fill Right audio effect to spread the audio across both.

CAPTURING VIDEO AND AUDIO FROM THE DESKTOP

I AM USING A PAVILION DV 7-6163 WINDOWS 7 OS.
WHEN I CAPTURE VIDEO OF MY DESKTOP, I ALSO CAPTURE ANY NOISE MY MICROPHONE PICKS UP. A COUGH OR SNEEZ. HOW DO I PREVENT THIS?
THANK YOU,
This question was solved.
View Solution.

Its simple. DONT cough or sneeze when you are capturing video.
The notebook which you have has a digital dual-microphone array which features beam-forming, echo-cancellation, and noise-suppression software support.
Also Go to Control Panel > Programs and Features, uninstall IDT Audio drivers , restart the computer and install updated drivers from here and see if that helps.
//Click on Kudos and Accept as Solution if my reply was helpful and answered your question//
I am an HP employee!!

Unable to capture HD 1080 video from HDCAM deck using Decklink HD

I have an original decklink HD capture card with SDI I/O. I have a rented Sony HDCAM F500 deck for the weekend. I can not get FCP to digitize even a frame. All my QT, FCP, OSX and Decklink software is up to date and compatible with one another acording to Decklink's website.
The capture tool shows no video input. I am conecting via SDI from the HD output of the deck to the SDI input on the card, the capture settings are set to the HD format I need to work in, 23.98 PsF. I get the error mesage when I select the setting I want: Unable to locate the capture device Blackmagic HDTV 1080. Your system config may have changed or your deck/camera may be disconnected or turned off.
The system will work in SD using the downconvert output of the deck, but this does me no good on this job. I hope someone has experience with this problem and can help because I am out of ideas!

sorry mate, if I was in the office I would try to help troubleshoot this thing, but here at home its a bit pointless.
other than suggesting you check that you really do have an Declink HD card an not the Declink SD card, or th epossiblity the card may be faulty, the best I can offer is to point you to the Decklink forum at the Cow.
http://forums.creativecow.net/cgi-bin/newviewposts.cgi?forumid=124
have you tried to capture any other HD flavour with this card? how about capturing via the downcoverted SD and using the card to upconvert to HD? (this is not a suggested workflow, just trying to ascertain whether the card is working in HD at all)

Muffled audio from rear speakers using Audigy Gamer

I just upgraded my mobo to the asrock 939Dual-SATA2, and was using the 7. onboard audio until the buzzing/humming everytime I moved the mouse finally got to me. I also missed being able to skew the sound slightly to my rear speakers.
I finally decided to reinstall my Audigy Gamer. I was very disappointed to discover the rear speakers playing awfully. The music is very muffled and nothing like the front speakers.
Before I upgraded my mobo these monsoon 5. speakers played great with the audigy gamer. They also played great with the 7. onboard audio.
Can anyone help me?

Read through this lot and see how you go.
P
http://forums.creative.com/creativel...ssage.id=46767
P2
http://forums.creative.com/creativel...ssage.id=46768
P3
http://forums.creative.com/creativel...ssage.id=46769

No audio from dock when using VGS adapter

Anyone else having this problem? I get fine audio output from the dock, but when I plug in the VGA adapter, the audio is muted. It only comes out of the iPad internal speakers. I cant find any settings to change this.
Any help would be appreciated.
Win

I took it to a local Apple centre and it turned-out to be a faulty keyboard dock.

No audio from one speaker using the front jack

I have an hpe-230f. Today I tried to use my headphones and I found out that I only got sound with one speaker. I used a few other sets of headphones and got the same result. The sound jack on the rear is fine so I suspect that the front port dongle/cable is faulty.
I contacted HP support to try to get them to send me a replacement front dongle but they want me to send it in but I can't because I need the computer for schoolwork and if they end up reformatting my hard drive while it's being serviced I''ll be stuck on the phone with Microsoft for quite some time trying to get them to reacivate my Office 2007 key .
Any ideas?

Hi,
Try the following.
Shut down the notebook, unplug the AC Adapter and then remove the battery. Hold down the Power button for 30 seconds. Re-insert the battery and plug in the AC Adapter.
Tap away at the esc key as you start the notebook to launch the Start-up Menu and then select f10 to enter the bios menu. Press f5 to load the defaults ( this is sometimes f9, but the menu at the bottom will show the correct key ), use the arrow keys to select 'Yes' and hit enter. Press f10 to save the setting and again use the arrow keys to select 'Yes' and hit enter.

Can JMF capture audio from sound card?

I want to know if JMF can capture sound/audio from the sound card. Until now we have been capturing audio from microphone. but is there any possibility of capturing audio from sound card using JMF.
The audio captured from the sound card is to be streamed using JMF/RTP API.

Dear seniors,
i have tried to display my audio file as a graph as
x axis being the Time and the y axis beeing the frequency/pitch.
look at this post, i have mentioned all here...
http://forum.java.sun.com/thread.jspa?messageID=3073027&#3073027
is it possible to display as i desired?
wht the audio stream has? is it frequency or pitch?...
pls do give me some tips on that...
thanx in advance
-Munas.

Capture audio from MIC and decode bitsream

Hi, I am new to windows phone 8.1. I want to capture audio from the MIC using MediaCapture, first I can capture to the audio using recordToSorageFileAsync but I cannot capture it to just to a memory steam, how is this done? Also after it is captured either
way the recorded data needs to be broken up into a byte array, so that I can bit decode, i.e. I need to determine what is a high and what is a low, the audio is Manchester encoded given a 1 = 25mSec on 25mSec off and a zero = 25mSec off 25mSec on, how can
I decode the audio to find out this pattern, the audio pattern will have a fixed preamble of FF followed by the data.

StartRecordToStreamAsync
method provide the possibility to save to memory stream.

Capturing audio from avi file

I want to capture just the audio from avi file. Here is what I did. I dragged the avi into garage band and saw a separate audio and video track. I tried to import the just the audio into itunes but it would only let me import both video and audio. I decided to burn the audio to cd and then import it into itunes. This seemed to work but I would like to know if there is a better method. I figure there must be. Anybody out there tried this?

i'm not near my GB machine to test this, but see if you can Share to Disk and make sure the Compress checkBox is not selected.

IMovie audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !

iMovie 11 audio issues. Fine in timeline, but when rendering to iTunes or Media Browser, audio from certain portions of movie files are heard in places where it shouldn't be !
I have created a project where I have a montage of photos and video clips edited together with music under. Some audio portions of the video files are being muted in some areas and those portions are being heard in another part of the project. This is not for all video clips only certain ones.
The project plays fine in the timeline, but when I render the project thru iTunes or Media Browser, this is when the project goes corrupt.
I tried detaching the Audio from the video clips and this somewhat worked, but the original problem still exists with certain audio still being heard where it's not supposed to be.

I have a fix - or rather, a workaround.
WARNING: It is lengthy, but still far better than starting a new project from scratch.
I had this same issue and none of my transitions/clips were at custom speeds, nor did I have anything else weird going on. Unfortunately there is nothing you can do within iMovie to fix this, at least there wasn't for me. iMovie is BY FAR the buggiest software I have ever used and if you haven't already spent hours slaving away on a project, you are so much better off using just about anything else to edit your video.
...But let's assume you have already spent many hours working on your project and you don't want to start all over. Well then, you have at least one option.
It's a pain in the neck, but it's infinitely better than restarting your project from scratch.
This will require:
A software called Soundflower (which is free) and some kind of audio editing software (I use Logic, but really any should work).
1.) You're going to need to export your video with the messed up audio. Typically if you're audio is messing up, you're video is at least usually working just fine (at least it always does for me).
2.) You're going to need to open that video in your audio software and import only the audio. If your software doesn't give you this option, then you're going to need to record the audio from your video using the audio software and Soundflower. You can find tutorials on how to do this, but it's honestly pretty straightforward once you start playing around with you Mac's audio I/O settings. Remember to have your computer's volume all the way up when doing this.
3.) Watch/listen to your video and make notes of where the audio errors occur. I HIGHLY RECOMMEND writing down times too, as they will be extremely helpful later.
4.) Now were going to rip some working audio from the iMovie project itself. Go back into your iMovie project and only play back audio while in the edit window for this step. Do NOT play your project back in full screen.
This part is key: if you try to play back your project from the beginning the audio will usually still mess up. So, what you're gonna have to do is go back on your edit window timeline right before these errors occur and play that specific clip back while recording this working audio with Soundflower and your audio software. Essentially we're only recording the parts of the audio where these errors occur, so try to do this in order if you can. Try to leave several seconds of audio in before the error - that way we can use it as reference when we construct our new audio track.
5.) Now in your audio software you should have your original error-filled audio track and the new clips that we just captured. This part can be painstaking if you're not familiar with audio editing softwares, but as you'll learn, it's really not that hard.
You're going to look at your original audio track and compare it to your new working audio clips. You should be able to notice where those new clips are supposed to go by looking at the identical (or close to identical) waveform shapes in your original audio track. The two should correspond with one another. If you don't understand what I mean right now, you will when you start playing around with the audio. This is why marking times is very important.
Take your new clips and split them up if you haven't already, that way you can drag them around and edit them separately from one another. Essentially your going to line these new clips up with original and then replace the original parts with new ones.
We need to get this as precise as possible, so start off by getting them as close as you can with your naked eye, and then use a zoom tool to zoom in as much as possible so that you can get them lined up PERFECTLY, or at least extremely close. In some softwares you can just drag these new clips on top of the old track, but most of the time you will need to actually cut out the old piece and replace it with the new one. In doing this, zoom in and make sure that you are NOT cutting out a bigger space than your new clip will fill - otherwise you will have small gaps in your audio.
VERY IMPORTANT: Also make sure that this new audio track starts at the EXACT SAME time as your original - otherwise your new audio will be out of sync.
I know this part can really suck if you're not used to audio editing, but at this point, there is little other choice.
6.) Once you are done with this, export your newly pieced together audio track.
7.) Now open iMovie and create a NEW project. Re-import the video that you exported earlier that has the messed up audio. This might take a while, so just be patient.
8.) Then right click the clip and select "Detach Audio". This will do just that - allowing you to edit the audio separately from the video. Now delete this audio.
9.) Now, import the new, perfect audio track that we just made and make sure that it starts at the start of the project. Make sure it's in sync and that everything works.
Now just export your new video with the working audio and you should be done. Since we have given iMovie the audio with no editing actually being done in iMovie, it does not have to generate its own audio now and you should have absolutely no errors now - unless there is some that you forgot to take out earlier.
YOU'RE FINALLY DONE!!!
I know this entire process *****, but if you're that far into your project, there is little else that you can do. Now you've learned your lesson:
DON'T USE IMOVIE EVER AGAIN.
I hope this helped!

How can you rip audio from video

How can you rip audio from a video using Itunes 11.1? I am using a pc win 8

Possible in iMovie 08 with a lot of tinkering. Easy in iMovie 9 and iMovie 11 with drag and drop.
See [Aaron's blog post for how to do it in iMovie 08|http://imovie08.blogspot.com/2007/08/how-to-extract-audio-from-clip.html]

Capturing 4 Ch Audio from XL-H1 using FW?

Similar Messages

Maybe you are looking for