Capturing 60i to FCP5 from Jvc HDV

Hello! I am having a really hard time capturing 60i and 24p footage into our Final Cut Pro 5 system. We have tried the codecs and even changing the settings. Can anyone walk us through this? We have a brand new JVC HDV camera and can get the 30 frame rate to capture but not the others. We are connected to the camera through a fire wire.
We have plenty of hard drive space.
Thanks a bunch!

So far the ONLY frame rate from teh JVC that FCP supports is 720p30.
You can see if HDVxDV.com or www.lumierehd.com have versions that support and convert that format. FCP cannot do it at this time.

Similar Messages

  • Capturing 720p to mac from JVC GY-111

    Hey
    I have been working with a JVC GY-111 camera and FCP5. When I go to capture the footage I have the problem of the camera being recognised etc. etc. and I have been using DVHScap to capture it and then Mpeg streamclip to bring it into FCP as a quicktime movie. This has all worked well but there are some problems with this system.
    Firstly the footage that is downloaded is always out of sync with the audio and this is a pain as it seems that frames have been lost throughout the capture and there each clip has to be synced up individually which is very time consuming.
    Secondly there has to be a better way to do this. It takes too long to capture all the tapes like this and then replay them all in Streamclip
    Does anyone know a better way to capture from JVC GY-111 series of cameras and if so what is it?
    Secondly can anyone tell me why the frame are being dropped or how I can try to solve this sync problem
    Cheers
    Manxterman

    yeah but the FCP software doesn't recognise the camera I have to capture it in the complicated way above to try to get it onto the computer and then I have to bring it into FCP. The problem is that when the footage is captured as a quicktime file it is already out of sync. I think it is something to do with the stop/start points or something
    Thanks for you help though
    Message was edited by: manxterman

  • JVC HDV capture problems

    I'm having major problems capturing from JVC GYHD101 camera.
    My MacBook Pro can control the camera just fine and all my settings seem to be right, the computer will capture, but it will not capture constantly. The capture window will stay open and not report any problems, but what it will do is capture, then stop capturing, create a file (while the tape is still playing) and then continue capturing, even though the tape has moved on.
    If anyone could help figure this out I would be massively greatful!

    No, hense me posting in the FCP forum.
    I discovered why it was doing it, FCP splits the clips where the camera has been started and stopped. And even though there's a box in the settings to untick to stop this, it doesn't actually stop it.
    So when capturing from JVC HDV, I've found it is impossible to leave the tape running and capture the whole thing.

  • Capturing HD 720p from JVC

    Hey
    I have been working with a JVC GY-111 camera and FCP5. When I go to capture the footage I have the problem of the camera being recognised etc. etc. and I have been using DVHScap to capture it and then Mpeg streamclip to bring it into FCP as a quicktime movie. This has all worked well but there are some problems with this system.
    Firstly the footage that is downloaded is always out of sync with the audio and this is a pain as it seems that frames have been lost throughout the capture and there each clip has to be synced up individually which is very time consuming.
    Secondly there has to be a better way to do this. It takes too long to capture all the tapes like this and then replay them all in Streamclip
    Does anyone know a better way to capture from JVC GY-111 series of cameras and if so what is it?
    Secondly can anyone tell me why the frame are being dropped or how I can try to solve this sync problem
    Cheers
    Manxterman

    Here's a video I made for my blog, same camera JVC HD111E into FCP6 on a G5 2.7.
    http://www.steadi-onfilms.com.au/vlog/12/04/2009/jvc-hdv-video-into-final-cut-pr o-6

  • I am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize

    i am trying to capture from Sony HDV 1080i VTR FCP giving an error of not able to initialize. I am not able to capture the content in DV mode. i am using a Firewire 800 to 400 converter and a 6 pin firewire cable to connect to the SonyHDV VTR. Please suggest me how do i do this.

    The 800-400 converter plugs have proved a problem for this. What version of the software are you using. It sounds like an older version of FCP, if so you should ask your question on the Final Cut Studio forum.

  • JVC HDV Capture settings + Hardware advice for HDV capture

    We have 6.02 FCP Studio2. We shot JVC HDV 720 60P footage (1280 x 720) and are trying to capture thru FCP. We have the JVC GY-HD200U camera and the JVC BR-HD50 outboard deck. Other than the AJA HD 422 device, what are my options (hardware and software) to capture with Log & Capture in FCP? I need In/Out points of course.
    JVC HDV says it has a great HDV workflow in FCP, but they don't tell you how (at least where we have looked on their website)
    Unfortunately, Blackmagic's Intensity Series cannot control the devices via the HDMI link (One HDMI output is on the JVC BR-HD50 deck). We thought that might work.
    Can anyone give us advice on the settings in FCP to control our HDV deck or Camera? We would prefer to keep everything digital, via firewire
    Thank you everyone for your help. I did search for this topic and found nothing. I am sorry if this has already been covered...

    Connect your deck or camera via firewire to your Mac, and then select the easy setup in FCP's FCP menu that matches the format you've shot. I'm pretty sure for a device control setting either your camera or deck would use HDV Firewire Basic as a device control setting. Other than that it should use the stock preset for the format you've shot.
    Jerry

  • 30p capture JVC HDV FCP 5

    I am on set for a feature being shot on the JVC HDV camera and cannot get FCP 5 to capture more than a few seconds of the footage on a 2 gig powerbook with tons of super fast external memory using a firewire. Sometimes we can get a whole take and sometimes not. We are recording at 30p which should not be a problem. Are there any patches out there or has anyone else had this problem? Are there settings that need to be a certain way other than putting the capture options on 30p 720? It is almost as if there are dropped frames but the footage is fine and time code consistent.

    Hi
    Thanks for your quick reply, in the meantime I did something which seems to have fixed my capture problem, along the lines of what you were suggesting... my sequence was set to 30p and I changed it back to 29.97 and now it's capturing into the project. I captured a few minutes at this and it seems fine so I'll go with that.
    I'm using an NTSC model HVX200 camera, it was a few thousand Euro cheaper than the EU model and I was able to buy it almost a year before the camera was available here, so that's the reason for NTSC mode, I usually shoot in DVCproHD 720p 24fps for short film material, so really there's the advantage for the US model in the first instance.
    Thanks again!

  • It is possible to capture 1920x1080 instead of 1440x1080 from a HDV camera in fcp ? If do, plz also says the pros and cons.

    It is possible to capture 1920x1080 instead of 1440x1080 from a HDV camera in fcp ? If do, plz also says the pros and cons.

    And it's easy enough to change to square pixels within the editing application.
    Russ

  • Premiere Pro Does Not Support Audio-Only Capture For Some Formats, Such As HDV?

    In the PPro CS 5.5 Help file  under, "Recording audio", it says:
    "Note: To capture an audio-only file from a digital video source, choose Audio from the Capture menu in the Logging pane of the Capture panel.
    "Premiere Pro does not support audio-only capture for some formats, such as HDV."
    I'm shooting in HDV and if I want to capture audio only, would I just need to switch my setting to DV?
    The only thing is my Canon HV20's HDV audio is MPEG-1 Audio Layer 2, 16 bit, 48 kHz.
    My DV setting is PCM audio, which I think is a better quality format, right?
    Would there be any noticeable difference?
    Thanks.

    Capture your HDV material in the normal way and just drag audio only from the source monitor to the timeline.

  • Video from JVC GZ-VX815 - poor on iPhoto, good on iMovie

    I searched all over the internet and could not find anything. I have this camcorder from JVC, the GZ-VX815. iPhoto recognizes the videos and imports them. However whenever there's movement, you get horizontal lines on the screen. Now in iMovie that doesn't happen.
    While I am fine with working with iMovie or other video editing software, my wife uses only iPhoto to view her pictures and videos.
    What I would like to know is if this is normal and why this is happening. Is there a solution other than sticking with iMovie (or Premiere)?
    Attached are two screenshots to show what happens.
    This is the first one, from iMovie:
    And this is the iPhoto capture:
    Can anyone help?

    I searched all over the internet and could not find anything. I have this camcorder from JVC, the GZ-VX815. iPhoto recognizes the videos and imports them. However whenever there's movement, you get horizontal lines on the screen. Now in iMovie that doesn't happen.
    While I am fine with working with iMovie or other video editing software, my wife uses only iPhoto to view her pictures and videos.
    What I would like to know is if this is normal and why this is happening. Is there a solution other than sticking with iMovie (or Premiere)?
    Attached are two screenshots to show what happens.
    This is the first one, from iMovie:
    And this is the iPhoto capture:
    Can anyone help?

  • How to capture the selected values from module pool dialog list box !

    Hi experts,
    Can anyone help me out in capturing the values from the list box.
    i am able to set the values in the list box.But i am not able to capture the selected value from the list box. Always the list box name is getting as "space"
    I also tried in using the FM "VRM_GET_VALUES" but it is retireving all the values. Is there is any flag for filttering out the selected value.
    Your inputs are appreciated.
    Thanks,
    Vijay.

    Along with the PBO and PAI event, add a POV event in the flow logic of the screen
    DEMO_DROPDOWN_LIST_BOX -is a good demo example.
    PROCESS ON VALUE-REQUEST.
    FIELD structure_name-field_name MODULE create_dropdown_box.
    In the report :
    MODULE create_dropdown_box INPUT.
      SELECT carrid carrname
                    FROM scarr
                    INTO CORRESPONDING FIELDS OF TABLE itab_carrid.
      CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
           EXPORTING
                retfield        = 'CARRID'
                value_org       = 'S'
           TABLES
                value_tab       = itab_carrid
           EXCEPTIONS
                parameter_error = 1
                no_values_found = 2
                OTHERS          = 3.
      IF sy-subrc <> 0.
      ENDIF.
    ENDMODULE.
    In the layout, assign a Function Code , for eg : 'SELECTED' to the listbox and lets say name of the field is SDYN_CONN-CARRID. So in the PAI module,
    MODULE user_command_0100 INPUT.
      CASE ok_code.
        WHEN 'SELECTED'.
          MESSAGE i888(sabapdocu) WITH sdyn_conn-carrid.
      ENDCASE.
    ENDMODULE.
    sdyb_conn-carrid will contain your selected field

  • Video Flicker & Creation of SD DVD (16:9) from a HDV edit...

    Hi Everyone,
    We have just completed a project on HDV.
    Shot on HDV using Sony FX1E
    HDV Edit using FCP HD
    Video Card is Declink HD Extreme.
    Problem 1:
    Flicker while we render video:
    When we render the timeline, the rendered output some times has a flicker that appears. It happens to everything, video, background animation done using motion anything you name. Then if we re-render the same, it goes off next time itself or sometime later. Not quite sure when and why ? We have to check to ensure no flickering is there before we step into the next stage.
    The only problem that i could think of is. We have only 1 harddisk in the system. So the OS is in the same drive in which the project is also getting executed.
    Problem 2:
    Creation of SD DVD (16:9) after finishing HDV edit.
    Compressor, the **** product is a royal waste or is that we do not know how to use it. or should we be using something else to make a SD DVD from a HDV edit.
    We completed the project by taking a Uncompressed movie output and taking it into another Matrox sytem and created a SD DVD using Adobe Encore DVD. So the job got over, but what is the way to do the same in FCP & DVD Studio PRO.
    Making a HD DVD is perfect, we tried that and it worked well.
    We look forward to the comments from all you experts.
    Thanks in advance.
    S.Venkatesh
    Power MAC G5   Mac OS X (10.4)   Decklink HD Extreme - Video Card

    One of the interesting and clever things about OSX is that data is not necessarily written to disk when you think it is - it first goes into a buffer and the buffer is written to disk at times of the OS's choosing. This allows the OS to handle multiple tasks etc. 'at the same time' - it stores things up and then milliseconds or perhaps seconds later writes them to disk. Remember that this includes all processes - and when OSX is running there might easily be literally hundreds of separate little OS-level programs running, all needing to do this or that with files on disk, not just the programmes you think you have running, like FCP or Safari.
    The net result of this is that you have no control over when the disk is needed by the OS - and although this isn't a problem normally if you're using Safari or Word or something, when you are handling streaming media like video, it can be a very big problem. If you are playing a piece of video (which must maintain a constant data rate) and the system absolutely HAS to do something to or from disk, your video playback can take a hit, skipping a few frames. If this happened on a long playout to client it would be uncomfortable, but if it happened on your delivery master it could be horrendous.
    If you keep your media on a separate disk, the problem disappears, as OSX can do whatever it needs without interrupting the flow of video off the other drive.
    So don't so it, it's just waiting to bite you in the a55.

  • Capture the Freight charges from incoming invoice

    Hi Guru,
    The requirement is to capture the Freight charges from incoming invoice . Is it possible to capture that amount in INVOIC01 idoc.
    The Analysis what I have done is INVOIC01 IDOC type is having only two segments (E1EDS01,E1EDP26)  with Amount field . Based on the qualifier the value is getting populated . My assumption is, if we find the right qualifier for freight this may get resolved .Please let me know if there is anyother way or rigt qualifier for capturing thefrieght charge
    The FM to post is ZIDOC_INPUT_INVOIC_MRM.Pls find the attached screenshot too.

    Hope you have not read the Invoice Idoc type whcih is used for EDI invoice.
    The Invoice idoc type does not support the functionality of Planned delivery costs ( Freight )
    Please go through the link
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/f50abcea3b11d194dc0000e83dd751/content.htm

  • Capture the Freight charges from incoming invoice in an IDOC

    Hi,
    The requirement is to capture the Freight charges from incoming invoice . Is it possible to capture that amount in INVOIC01 idoc.
    The Analysis that I have done is INVOIC01 IDOC type is having only two segments (E1EDS01,E1EDP26)  with Amount field . Based on the qualifier the value is getting populated . My assumption is, if we find the right qualifier for freight this may get resolved .
    The FM to post is ZIDOC_INPUT_INVOIC_MRM.Pls find the attached screenshot too.
    Pls let me know if there is anyother approach or right qualifier to populate the freight charge

    Hope you have not read the Invoice Idoc type whcih is used for EDI invoice.
    The Invoice idoc type does not support the functionality of Planned delivery costs ( Freight )
    Please go through the link
    http://help.sap.com/erp2005_ehp_04/helpdata/EN/44/f50abcea3b11d194dc0000e83dd751/content.htm

  • Capturing Application Error log from SXMB_Moni

    Hi,
    I wanted to capture the error information from Application error log from ECC sxmb_moni and forward that as email alert.
    We have already alert configuration in place with alert category using standard variables. Was wondering if I have to capture application error log from sxmb_moni what would be steps involved. Please let me know if anybody has worked on this and appreciate your help on this.
    Sample Error message from sxmb_moni of ECC system
    MT_Fault
    Error in Application System
    Detailed Information
    Process Order invalid
    Thanks
    Selvam
    Edited by: Selvam_muthu on Jun 23, 2011 5:40 PM

    Hi Selvam,
    As the exception is raised in ECC system, alert cannot be trigger, alert will get trigger when there is a error in PI system. To raise a email, write additional code in ECC to trigger the e-mail with proper error content

Maybe you are looking for