Capturing across TC breaks, new clips with same duration so out is too far

I logged a clip that had a media start of 00;00;06;13 and an end of 00;59;36;04, making a duration of 00;59;29;22.
During batch capture of this clip Final Cut Pro apparently encountered a few timecode breaks, and since my user settings are to create a new clip at the break FCP created three new clips for me. However the master clips all had the same 00;59;29;22 duration, so even though the first clip only got ten minutes in before the TC break the remaining 49 minutes are in the master clip and they appear as black. The next master clip that was created from the break got a media start of 00;10;22;27 and an out of 01;09;52;18, a duration of 00;59;29;22. The next TC-break-created clip starts at 00;44;08;20 and has and end of 01;43;38;09, duration of 00;59;29;22. The third clip started at 00;59;42;13 and since its duration was also 01;43;38;09 its out point was 01;59;12;04.
So all of the clips were mostly black, and the new out points FCP assigned for the new clips were far beyond the end of my one hour tape.
The master clip's duration should have matched the amount of media that was successfully captured up until the timecode break, and then when FCP created the new clip it should have set its out point to match the original out point.
Can anyone else confirm this behavior?
I have submitted this problem to http://www.apple.com/feedback/finalcutpro.html

Hi wes,
i think you forgot to mention the version of fcp
as well as OS X.
I suppose you trashed prefs and all...
Also: if you import clips from the browser do they still have this black?
On finder level do the clips have the size of a 10 minutes clip or of an hour long clip?

Similar Messages

  • HT5622 I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while i went to make a new ID with same Email but it says the Email is already in use! what should i do?

    I was making new Apple ID with my other Email on iTunes, but I canceled the process on payment page. After a while I went to make a new ID with same Email but it says the Email is already in use! what should i do?

    You will need to try changing the email address on the first account and see if you can then re-use it on a new account - you can try changing the email address via http://appleid.apple.com or by logging into it via the Store > View Account menu option on a computer's iTunes (if you don't have a spare email account then you can create one via http://gmail.com or http://hotmail.com)

  • I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    I have a big project but when im going to add a new clip with sound and picture in picture its only the sound that works. Can someone please help me?

    Also, if you can't get them to work, what is the error message you are getting?
    Baron Samedi

  • IDCS3 - Paste image into new frame with same cropping offsets?

    Anyone know if there's a better way do to this?<br />It used to work in CS2, and (I know this comment won't be popular, but since half the studio I'm trying to convert brings up this point, I'll pass it along <G>), it's always worked in Quark. <G><br />http://indesignsecrets.com/paste-image-into-new-frame-with-same-cropping-offsets.php<br />Be nice to get this to work without having to jump through hoops.<br />(And please, please don't tell me I need to update to CS4 to get this basic functionality BACK).<br />k.

    Thanks, Rob. Unfortunately, I got a new error with the latest script you posted (sorry--not trying to be a pest!!). It says,
    Apple Script Error!
    Error Number: -2753
    Error String: The variable myRend is not defined.
    (One thing that's different is I'm working on a different machine than I was the first day I posted about this, but I'm using the exact same version of InDesign. Would this make a difference? I forgot to copy the original script file from the other computer before coming to work today... If I need to do that, I can.)
    Thanks for your continued help!

  • SCCM Client entry in SCCM console for new VM with same hostname

    HI,
    I have Hyper V server with several VM's running with server OS. Recently I have stopped 2 VM's with OS windows server 2008 & 2012 & recreated new VM's with same hostnames & IP addresses. Problem is I am unable to install SCCM client on New VM
    as old enrty lies in SCCM consle with client status Active. I tried to uninstall the client from console, But its showing "can not ping".
    So is it ok to simply delete this entry from console so new entry will come in front?

    Hi,
    You can delete the object in the SCCM Admin Console,you can also install the client manually and then they will register again creating a new object with the same name.
    Regards,
    Jörgen
    -- My System Center blog ccmexec.com -- Twitter
    @ccmexec

  • Paste image into new frame with same offset

    InDesign CS4-- I'm trying to copy an image from one frame and Paste Into another frame on the same page, and have it appear in the same position within the frame. I want it to adhere to the offset coordinates of the previous frame, but instead, it uses the offset coordinates of the page, or centers the image within the new frame. As I recall, CS2 or CS3 had a feature that allowed me to do this, but I cannot figure it out in CS4. Please help! Thanks.

    Thanks, Rob. Unfortunately, I got a new error with the latest script you posted (sorry--not trying to be a pest!!). It says,
    Apple Script Error!
    Error Number: -2753
    Error String: The variable myRend is not defined.
    (One thing that's different is I'm working on a different machine than I was the first day I posted about this, but I'm using the exact same version of InDesign. Would this make a difference? I forgot to copy the original script file from the other computer before coming to work today... If I need to do that, I can.)
    Thanks for your continued help!

  • Change in hardware key on new installation with same SID

    Dear Experts,
    Background:
    We installed SAP Netweaver 7.3 EHP1 on Microsoft Windows Server 2008 and applied SAP License on it.
    So there was a specific SID, Hardware key and Installation No to our installation.
    After few months our Server machine got crashed and we formatted it.
    Problem:
    Now we want to install SAP Netweaver 7.3 EHP1 again on same Server machine.
    Here question is:
    1. Will the Hardware Key be same if I install SAP Netweaver 7.3 EHP1 with the same SID as it was before ?
    Note: We want to apply the same license that was there before the crash. But we can apply same license if and only if after installing with same SID as before, system generates the same Hardware Key as before Crash !!
    Other Information:
    Information that we got from SAP Note (94998 - Requesting license keys and deleting systems ) that :
    "  For the following data changes, you require a new license key:
    Customer hardware key - database - installation number - system ID.
    Thanks in advance for your apt responses.
    Muddassar Khan

    Hi Muddassar,
    With OS reinstallation , the HW Key will change.
    I suggest you apply for a new License with the new Hardware Key.
    Was this a Test System??
    You said after few Months , the system Crashed.
    Have you taken a Backup (Windows System State) ??
    Regards,
    Ashish .A. Poojary

  • Moving DP Content to a New Server With Same Name

    We are currently in the middle of a server OS refresh from 2k8 to 2k12 R2. Some of the servers are DPs so I need to move the content from one server to another. The big problem is that the new server must have the same name.
    I've read this thread http://social.technet.microsoft.com/Forums/en-US/1ffcaa47-9bf8-476d-965e-28350a6bef1b/move-content-from-old-dp-to-new-dp-at-same-remote-site?forum=configmanagerapps which kind of covers my issue but I presume this person was going to
    a server with a new name.
    Has anyone done this? Is it possible?
    Unless there is something clever the only way I see to do this is to uninstall the DP role from the current server, remove the current server from the domain, add the new server with the same name, re-install the DP role and then re-distribute all the content
    to the new server. I'd rather not do this as the DP is on a remote site so all the content will be going over the WAN.
    I am running SCCM 2012 SP1 CU3.
    Any ideas?

    Hi,
    >>So can I pre-stage from the old server to the new server or does the pre-staging have to be done from the site server?
    Yes, you could prestage content from the old server to the new server. Prestaged content files could be created from Configuration Manager Administrator Console.
    >>What is the order of the process?
    The following blog could help you to prestage content.
    http://blogs.technet.com/b/inside_osd/archive/2011/04/11/configuration-manger-2012-content-prestaging.aspx
    Best Regards,
    Joyce
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • When I create a new account with same password is ...

    Over the course of inactivity it happened that I forgot my passwords. I did not request a reset but created a new account with the same e-mail. Can I have several accounts with the same e-mail? And if so, how do I request a reset of password for a specific username resp. account? I would like to keep the old user accounts for several reasons. But requesting a reset via e-mail will do so on my newest account for which I know the password.
    Am I trying to do something impossible?

    as far as I remember, accounts are tagged as inactive after 6 months of no activity.  
    In your case, I think you may need to contact customer service for further assistance.
    Just click the link below to see the instructions on how you can get in touch with the Support team ;
    https://support.skype.com/en/faq/FA1170/how-can-i-contact-skype-customer-service
    CONTACT SKYPE CUSTOMER SERVICE   |  HOW TO RECORD SKYPE VIDEO CALLS  | HOW TO HANDLE SUPICIOUS CALLS AND MESSAGES   |  WINDOWS PROBLEMS TROUBLESHOOTING   |  SKYPE DOWNLOAD LINKS  
    MORE TIPS, TRICKS AND UPDATES AT
    skypefordummies.blogspot.com

  • Create new application with same ID as a previous application

    10gR2, webtogo client. We are in a situation where due to what looks like some corruption issue/inability to publish correctly, we may need to drop our existing application and re-create. So the application will have a new applications.id. applications.dsn and applications.publication value. This will most certainly force all our offline users to do a re-install which we want to avoid. (correct? - I'm assuming the offline databases like a1121.odb are keyed to the 1121 applications.id)
    Wondering if there is any way to re-create a new application but with the old application ID. One way we think we could do this is that after dropping the application, reset the mobileadmin APPIDS sequence so that it will pick up the ID of the old app when we create the new one. And so have the same applications.id. applications.dsn and applications.publication value.
    However, wondering if we do this, we'd cause some other issue. Anyone have any ideas? (we have ticket open for the publication problem, but not much progress yet on that end.)

    You may create new mode with the same transaction.
    I'm not sure, that you may just "copy-paste" the content from one mode into another.
    To create new mode with the same transaction, you may use the following code:
    data: l_current_tcode like sy-tcode.
    move sy-tcode to l_current_tcode.
        CALL FUNCTION 'TH_CREATE_MODE'
          EXPORTING
            transaktion    = l_current_tcode
            del_on_eot     = 1
    *        PARAMETERS     = l_pars
            process_dark   = 'X'
          IMPORTING
    *        mode           = 
          EXCEPTIONS
            max_sessions   = 1
            internal_error = 2
            no_authority   = 3
            OTHERS         = 4.
        IF sy-subrc <> 0.
          MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
                  WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
        ENDIF.
    What transaction do you need to display?
    Message was edited by: Cyrill Smirnov

  • IPod nano not recognized by new computer with same version of iTunes

    iPod nano not recognized by iTunes on new computer. Same iTune versions.  Going from Windows 7 to Windows 8.1.

    Have a look at these 2 articles.
    Windows XP cannot detect an iPod.
    USB drivers are not installed properly or are out of date.

  • Delete existing RecordStore and then open a newer one with same name

    Hey All,
    I'm working in J2Me for Nokia S40 DP2.0 SDK 1.0.
    I want to delete my existing RecordStore (i. e; Products) and then open a new RecordStore as same name(Products) But
    There is an Exception thrown that RecordStore is Open;
    my deletion process is given below :
    public void deleteRecStore(String recordName) {
    if (RecordStore.listRecordStores() != null) {
    try {        
    RecordStore.deleteRecordStore(recordName);
    } catch (Exception e) {
    e.printStackTrace();
    public void createRecStore(String recordName, Vector data, int insertType) {
    if(recordName.equals("") && (recordName != null)) {
    try {
    if(insertType == this.NEW_REC) {
    rs = RecordStore.openRecordStore(recordName,true);
    this.closeRecStore();
    this.deleteRecStore(recordName);
    rs = RecordStore.openRecordStore(recordName,true);
    Can anybody pls help me...
    why I can't open a new recordstore like this ??
    If there any process then what is that ???
    Rania...

    This question belongs in the [CLDC and MIDP forum|http://forums.sun.com/forum.jspa?forumID=76]. I'll move it there in an hour or so.
    I would suggest that in addition to printing the stack trace of any Exception, you could append the Exception.toString() to a Form (or display it in an Alert) to see whether any exceptions are being thrown.
    db

  • New window with same document

    I'm considering switching from Excel to Numbers, and looking at the functions I use the most.
    In Excel I often have 2 windows open with the same document (one with my income, and one with my expenses for instance). Are you able to open a new window of the same document in Numbers?

    I agree, but this thread was/is about opening multiple windows onto a single document. I contend that, where using multi-window viewing makes sense, so might a less monolithic arrangement of several tables, perhaps across a couple of sheets.
    There are at least two reasons for a large table in Numbers:
    (1) The table is designed with an Excel mindset (or imported from Excel) where there isn't this particular degree of freedom of many separate tables. When I see questions about multi-window or split screen viewing, often at the heart of the matter is Excel mindset. In Excel it is common to create separate "zones" within a larger spreadsheet. This practice can create spreadsheets covering vast numbers of cells. In Numbers, these zones would better occupy separate tables, and not just because of the visibility issue. Separate tables resize more naturally, a problem in Excel when resizing one zone disrupts another.
    (2) The table contains a lot of data of the same form (sharing the same headers). I think Numbers could use some work in handling this case. At minimum, while a table is active, the table headers and footers could be "pinned" to the window while scrolling as the column labels: A,B,C,.. and row labels 1,2,3,... are currently.

  • How do I sync iPhone to new PC with same Apple ID?

    Hello -
    I have a new laptop PC and would like to use it with an iPhone 4 that I have had for a year now.  The phone was originally set up using our iMac, but I now would like it to be principally associated with the PC.  I have set up iTunes on the PC to be "authorized" with the Apple ID that the iPhone was associated with.
    If I plug the iPhone in to the new PC, given that it will still be associated with the original Apple ID, will I run in to any problems?
    Basically, I want the iPhone to remain as is (apps, songs, photos, etc.) but want to use the new PC for backup, sync, etc. from now on.
    THANKS!
    Doug

    doogles wrote:
    Is this true even if the new PC uses the same Apple ID as the original computer? 
    Yes.
    doogles wrote:
    ... Might it be possible to backup the iPhone to icloud, erase the contents of the iPhone using itunes on the new PC, then restore the phone (using the PC) to the backup on icloud?
    Yes, but not everything on your iPhone gets backup.
    http://support.apple.com/kb/PH2584
    Surely there's a way to do this...  People are regularly replacing their computers and don't have to start all over with their iPhones.
    Smart IT administrators make at least 2 backups to minimize lost.
    Best for you now is to copy the whole iTunes library over from the old computer.

  • Can not retrieve my password using my email address nor birthday as security question, can not access my purchases to update them even if I creat a new account with same email address, what can I do?

    Has anyone had an issue with password and not been able to retrieve it using email nor answering security questions? This is my case, I tred to do both, I do not get any email from Itunes to let me know how to do. If I try to reset it using my security question, which was my birthday, does not work either. I believe someone changed everything for me and I do not know what to do because in oder to update all my purchases I need my original account. I just created one using same ID and e-mail address, all successful, but it does not mean that I'm able to retrieve all my prurchases because it's a new account...Please, any idea, I appreciate your comments and/or feedback, Thanks!!!

    Content and Apple IDs -
    Content is forever tied to the Apple ID that bought it. Apple does not transfer content from one Apple ID to another. Apple does not merge Apple IDs. You will never be able to access your content bought with one Apple ID with a new Apple ID.

Maybe you are looking for