Capturing at 24 fps with Black Magic Decklink Studio

I keed capturing video at 24 fps. I would rather be at 29.97 fps. How do I get to that level. The black magic is set to NTSC.

More information needed for someone to help... please click below and provide the requested information
-PPro Information FAQ http://forums.adobe.com/message/4200840

Similar Messages

Black Magic Decklink Studio 2 and CS6

Hi, all. I've been doing this for years and am always amazed at how complicated it is capturing video and audio with Premier. Now, with CS6 and Black Magic Design's Decklink Studio2, it's no different. The Black Magic capture utility works fine, but Premier won't recognize the card and it's drivers. I can't build a capture list, but use the BMD utility to capture video for editing.
Experience says reload drivers. I did that. Also loaded latest BMD drivers. Still no capture in Premier. One giant challenge is our company's IT department retains admin rights to this Windows7 64 bit Dell Precision 7730. I have to open a trouble ticket to change or load anything!
Anyway, any thoughts on this would be much appreciated.

Mr. Bowen. Thanks for the quick response. Settings in Premier are limited. The BM board has its own control panel. But here is the setup:
NTSC, 29:97, RS422 machine control, use capture time code.
Premier takes in our HD P2 material just fine. Also just about every flavor of AVCHD. Trouble is we use a ton of vintage footage originating from RS422 machines: everything from s-vhs, ¾” and BetaCamSP. Bottom line is it crashes EVERY time we try to use the capture function. There’s machine control, but no capture window showing. Obvious driver conflicts of some kind. ☹
Doug
PGE Media

Premiere Pro 5.5 + Black Magic Decklink Mini Monitor Issues

I have been running Ppro 5.5 on a windows 7 x64 machinine without issues. However, I added a Black Magic Decklink mini monitor recently. I am having issues of time line stopping at certain native transition effects like cross disolve and premier freezing crashing to blue screen when using black magic Ppro presets.
When I changed the render mode to 'Software only' things improved. However, still face freezing intermittently but frequency is much less.
I also use ASIO4all audio driver to monitor, though when I use BM presets sound is played through HDMI.
My configuration is as below:
Processor: Intel quad core i7 2600 K @ 3.40 GZ
Memory: 8 GB
Display Card: Nvidia Quardo 2000d
OS: Windows 7 Professional x64
Edit Software: Adobe Production Premium CS 5.5 (PPro patch loaded)
SSD 128 GB system hard drive
2 TB Media Drive Internal
Audio Interface: Mackie Tapco Firelink (not used when using Black Magic Ppro Presets)
Audio Driver: ASIO4ALL (not used when using Black Magic Ppro Presets)
Could any of you give some idea what could be wrong here?
John

I have not used a Mini Monitor on CS5.5 (I have used others) but BM cards did work differently with CS5.5 to CS6, when Mercury Transmit was introduced. They did not do realtime effects as well (as you are finding) and only output from Blackmagic sequences. So most of the problems you are having, apart from the crashing, are normal. The BM card is also seen as a sound card so it could be set to do the sound for the system, or for Premiere, even though the picture is not being transmitted (check the audio hardware preferences in Premiere to see which is being used for sound).
The crashes could be related to graphic card drivers. CS5.5 won't be programmed to use the latest nVidia drivers, and we have had problems using the latest (300 series drivers) with CS5.5. which only show up with hardware (Blackmagic/Matrox etc) but work in software mode. The fact that you get crashes with effects may also point to this. Try downgrading the quadro drivers and see what happens - to a version like 275 or 296 rather than a 300 series driver.

FLME compatible with Black Magic Card?

Hello
Does Flash Media Live Encoder is compatible with the cards :
acquisition card BLACK MAGIC DESIGN DeckLink Studio
acquisition card AJA KONA-LHe
Someone has already tested?
Thanks for your Help
Best regards
Jerome Hutain

Thanks
I found this information on OSMF website
Now, i am sure it works.
Thanks for your help
Best regards
Jerome
*"Additional Capture card certification: Blackmagic
Decklink<http://www.blackmagic-design.com/products/decklinkhdextreme/>+
AJA Kona
(formally Xena) <http://www.aja.com/products/kona/index.php>"*
2011/4/15 tarnic86 <[email protected]>
In my opinion, if the driver of your new BlackMagic card are compatible
with your operative system, and installed correctly, FMLE uses it as any
other peripheral, so it should work.
Maybe you can ask to their support to be sure...
>

Adobe not allowing import of XML file captured from Media Express through Black Magic capture card

I have been going crazy trying to find a way to import the XML files to fix the digitized look Adobe capture gave my footage. Someone help me
These are not XML from Final Cut. They are files saved from Media Express, a Black magic design program used for Capturing.
THANK YOU.
Please email me if you know how to fix this
[email protected]
THANKS AGAIN!

Wouldn't it be more appropriate to open the actual media files captured with the program?

No preview codec, crashing on start up, no audio with black magic, asking for serials

Hello,
I have 4 issues with Premiere CC. At work we have a school license of some sort, what I know we got a special design one from the sales team (I might be wrong).
The problems we have runned into are:
1. We students try to open a project they been working on a error screen popps up and says something like "No preview codec could be associated with this sequence...."
I think this happens when students have merged audio and video toghether.
2. I got some help from the tech support and they made some changes in the libiry in one of the editing rooms computers and reinstalled premiere Pro CC.
It seemed as everything was working until I opened premiere CC the day after, and it asks me for a serial key. I tried putting in the serials we got and non of them worked.
I also tried logging on to the account we have and it still asks me for the serials. And when I try starting in in trail mode I can't playback anything.
3. In another editing room Premiere was crashing on start up, so I was told by the tech support to uninstall all adobe softwares and update my mac OsX and then reinstall the softwares needed. It worked but if i save projects and try to open them up Premiere CC craches.
4. On computers using black magic deck link I can't get audio out from premiere pro.
I would really appreicate if I could get some more support.
Thank You
Viking Jonsson

Hello again,
So the sound issue is solved, so for other users with the same problem I will write down my way of making it work.
I read some time ago that someone made it work by starting AE and in AE more choices were avalible in the audio prefrences, but this didn't work for me but it might for some, thats why I write it here.
I took this a step futher and I opened up Audition CC, and in Audition CC the sound worked just fine and it was automatically set to black magic.
After I had open Audition CC I was then able to select Premiere Pro 7.0 as the sound output in the Apple system settings sound prefrences.
Then the sound worked fine in AE and PP. Should also note that when I did it as said in the manual I didn't get it to work.
The preview preset issue is some what solved, I reinstalled premiere and upgrade my OSX as written above. First time I installed Creative Cloud I did it from a build from a hardrive I think that some how made it so creative cloud could not reach premiere correctly???
Although I still have the problem with serial numbers sometimes and I have to be logged on wich is don't work if i try to log on with the account on two or more computers.. Even thou we have a school license, so I still appreciate all help I can get with this.
I will also add that I heard that strange things can happen if users install apples latest ProApp QuickTime Codec 1.0.4 so watch out for that one at the moment, I sure adobe will fix this soon as well

Distorted audio out of Black Magic Decklink

Using a PowerMac G5 with a Blackmagic Decklink card the playback audio/out from the timeline is distorted. During capture, audio/in is fine. All led levels read fine, even the audio/out playback from FCP and into a Panasonic DVC Pro 650 is fine. We've updated FCP to 5.1 and Decklink's drivers to 5.1.1. Even reformatted the G5, reinstalled the OS, with a fresh install of FCP Studio. And still the audio playback from the timeline is distorted. Thoughts?

You need to troubleshoot this one step by step. Start by capturing bars and tone from tape. Set the level, note the LEDs that are lit, capture, and then open that clip in the Viewer. Play and note the LEDs that are lit. Is it the same, or at least close to the level captured?
If so, then edit the clip into a new sequence and play. Same level or different?
If all that is consistent, then tell us what the signal path is from the G5 to your external audio monitors, so we can help you from that point.

Setting Premiere Pro with Black Magic extreme Tunderbolt/HDMI

Normally I work with Avid but, like everybody else, I think Premiere Pro holds the future. So I am working on that.
Question is, I have a Black Magic Extreme with Thunderbolt connected through my Pegegasus raid system. With Avid it works BUT with Premiere Pro it doesn't. So what am I doing wrong?

Hi,
I recommend watching this how to setup Blackmagic with Premiere Pro video if you haven't already.
Black Magic Design I/O Hardware Setup for Premiere Pro CS6 - YouTube
If you're still having troubles getting Blackmagic hardware working please let us know and we can run through other steps.
Best,
Peter Garaway
Adobe
Premiere Pro

Dslr footage with Black magic intensity - playback stops at every new clip

Every time the play head reaches a new clip it just stops.
If I don't use a black magic sequence it plays fine.
Is dslr footage too much to handle when using a black magic card?
MacPro 8 core 3ghz.
PP 5.2.2

If you have installed the latest BM drivers than I think your evaluation of the card is valid

Black Magic Decklink & Logic X

Hello,
My Decklink PCI card wasn't reconised in logic 9 64bit -
I don't see a option to route video to external device in the Logic X -
How are you supposed to score something feature length in logic when running stuff natively is a drag on the CPU and Pro Tools HD works great with the Decklink.
Hopefully this can be solved!
Cheers,
Matt

Mr. Bowen. Thanks for the quick response. Settings in Premier are limited. The BM board has its own control panel. But here is the setup:
NTSC, 29:97, RS422 machine control, use capture time code.
Premier takes in our HD P2 material just fine. Also just about every flavor of AVCHD. Trouble is we use a ton of vintage footage originating from RS422 machines: everything from s-vhs, ¾” and BetaCamSP. Bottom line is it crashes EVERY time we try to use the capture function. There’s machine control, but no capture window showing. Obvious driver conflicts of some kind. ☹
Doug
PGE Media

Black Magic Decklink not working on mac

I switched recently from final cut pro to premiere. However the blackmagic decklink videocard is not working. That is i can monitor the clips via the card in the viewer but not from the timeline. So i can't monitor my work anymore.
Does anybody have a clue what to do?

You have to select a Blackmagic Sequence preset to initialize the Blackmagic card in the Program monitor. I/O cards in Adobe will not initialize if you dont select one of their sequences. It's not like Final Cut where you can just select or change your output to the card.
Eric
ADK

Black magic ultra studio 4K

Friends,
Can anyone tell me the real advantages of using an external video card like blackmagic ultra studio 4K?
I'm using FInal Cut Pro X in my 27" 3.2 Ghz iMac witha 32GB of memory.
Normally I work with 4K / 5K RED footages.
Do you think it speeds up the video processing if we use an ultra studio 4K?
My doubt is other than the multiple output options, will it do an extra processing for an application like Final Cut Pro X?
Thanks in Advance,
Sreekumar

let me clarify this.
since I'm working with 4K or 5K images and my projector is a 1920*1080, if I use an ultra studio 4K, the images appearing will have more detail than connecting through my display port? is the how pixel-by-pixel works?
the monitor I;m using is a 2560*1440 resolution. which is better? connecting though the display port or through the ultra studio 4K?
Whats the real advantage of using this card when I use Final Cut Pro X for colour grading.
Will this card acts like an internal card we used earlier?

Soundtrack Pro (randomly?) disables my Black-Magic card I use as Sound Card

I uprgraded to 5.1 FCP and now my woes begin. Before Sountrack worked seamelessly. But now, sometimes it will play back (be audible) through the video card I use as my sound card also - a Black-Magic Decklink, and sometimes it won't. It does play though the internal speaker.
But on a few occasions, with no apparent intervention on my part, the sound does come via the sound card.
I have gone to my general preference, I have gone to Sountrack Preferences. I have tried the manual, but the manual search, you know, doesn't ever list any searches that bear at the moment at hand.
Also, Soundtrack Pro disables the card. for instance, to hear iTunes through the card, I had to quit Soundtrack Pro. Of course Apple wants to charge me for "help" with this. For myself, no idea, very stymied.

I also have the intensity settings in the mac system preferences set to y, r-y, b-y video & analog RCA Audio.
I am still stumped!

Black Magic Intensity Pro Play only Audio when edit in CS 5.5

Hi i have an problem, when i try to edit with Black Magic Intensity Pro in premiere CS5.5
i can play only Audio but not Video so i check settings on Premiere and control panel for
Black Magic Intensity and everything is OK and i check connections the preview is connect
via HDMI cacle and Composite Video/Audio and in both cases i get only Audio but no Video
so what is the problem? An driver for Black Magic Intensity Pro issue or what?
Current driver version is 8.2.1
Thanks.

Thanks i already do that and nothing,again only audio no Video.
I tray to play with integrated software Media Express who comes
with driver and working good.
So what is the problem the driver or Premiere CS5.5?

Black Magic Intensity Pro not shown in CS 5.5

Hi i need some help,before i use a CS5.5 i tested CS5 with Black Magic Intensity Pro and all go Ok. And then when CS5.5 shows up i instal CS5.5 but i can,t see a bin to edit with Black Magic i see all other various bin to edit but not with Black Magic. Why is that so some plugins or some bug in CS5.5?

Yes normaly like on CS5 it,s not my first time to
instal ,then you go to control pannel to make setings

Capturing at 24 fps with Black Magic Decklink Studio

Similar Messages

Maybe you are looking for