Capturing audio as well as video with a sony AVCHD handycam

Capturing from card inquiry.
I am new to CS6. I have a sony HD handycam model HDR XR350VE. I am trying to import my footage from it into CS6 but the audio is not being imported. I have read the instructions (3 different versions of the instructions!) and realise that I need to import all the BDMV files from the camera – stream, playlist and clip info files, and not just the MTS files.
It is made more confusing as my second camera - a sony HXR70p is importing perfectly (all the audio files as well as video) without a problem, and to make it even more confusing, the 350 camera works perfectly (imports audio and video fine) with premiere elements, so the problem is not with the camera.
Can anyone help?
Thank you.

Copy the entire folder structure from the camera to your hard drive and import from there
The reason why is in http://forums.adobe.com/thread/1015001?tstart=0

Similar Messages

How to replace audio on a music video with final cut pro x

How do I replace low quality audio on a music video to a higher better quality audio with final cut pro x?
I have the new audio on cd which I can rip and replace the original audio.
Some audio and music videos are not of same length, In cases like this how do I sync video to the newly replaced audio?
Is there any tutorial, link or where to look for this in the manual?
Any help will be very much appreciated.
Thank you in advance.

Providing you don't need the video synced or cut to a beat, all you need to do is place your music in the primary storyline
Connect your video above.
While your video is connected, hit CMD+R on your keyboard and stretch the video to the length of the music
If you were to cut the video to a beat, simply add markers on your music track, then connect and trim clips to your markers.

Premiere elements 12: how 2 burn video with menu on avchd disk with 1280x720

Hi, I have a source HD video (from TV) in resolution 1280x720/50. In export presets for avchd disk I only can find presets for 1440x1080 and 1920x1080. I'd like to export this video with menus in 1280x720 which is original resolution to AVCHD disk.
How to handle?
Regards, Juergen

Juegen
No version of Premiere Elements lets you produce a DVD disc with or without menus with AVCHD format of 1280 x 720 at 50 progressive frames per second.
The burn to disc, DVD, AVCHD, and Blu-ray are offered as you found them.
You could burn your Premiere Elements 12 Timeline content to a file AVCHD.mp4 (720p50) via Publish+Share/Computer/AVCHD with Presets = MP4 - HD 720p50. And, then burn that file to a DVD disc as data disc if the disc capacity allowed. But you would not have any menus. Disc menus are offered only for burn to disc/burn to folder. And, important, stop markers do not function at playback of the Premiere Elements (any version) AVCHD DVD or Blu-ray disc format on Blu-ray disc.
Please let us know if you need clarification on anything written.
Thank you.
ATR

Etting video off a sony dvd handycam

I've got a sony dvd handycam (dcr-dvd602e) and want to get the video into imovie. Problem is that it records to mini dvd ( wont work in macbook) it doesnt have a firewire connection, and it records to mpeg2. Did a course on imovies with a jvc camcorder and was sweet. ant ideas on what i need to do ( or do I buy a new camcorder ( got the sony because of its cheapish waterproof housing)

I've got a sony dvd handycam (dcr-dvd602e) and want to get the video into imovie.
If tech specs data I looked at are correct, this is an analog only playback unit -- i.e., not only no FireWire connector but no USB either. If so, then you would need another device to act as an analog to digital converter for you. This could be in the form of a dedicated external DAC (Digital-Analog Converter) or another device such as a camcorder or TV tuner with a "Pass Through" option to convert your analog signals to digital and pass them through to your MacBook. If you are lucky, you might have a friend who could loan you such a device (as Winston frequently puts it, for the price of a few pints of your favorite brew).

Import avi video with uncompressed PCM audio

I am unable to import into iMovie 10 or FCP X the audio portion of avi videos with uncompressed PCM audio. I just get the video and silence. They imported fine into previous versions of iMovie. Of course, I can use conversion programs to produce versions that import, but I have hundreds of hours of video in this format, so I would prefer not to have to do that. Is there a plug-in that would solve the problem?

Thank you for that info.
For video, the codec is MPEG-4 Video (XVID) and for audio it says MPEG Audio Layer 1/2/3 (mpga).
There are two issues with that file:
The first is the Xvid CODEC (not meant for editing), and then the MPEG Audio/MPGA. I would convert that file, to something that is more editable.
Good luck,
Hunt

Capture video with specified resolution

Hi, can you show me how to capture an h.264 mp4 video with the specified resolution(ex 360*480) on windows phone using c#, VS2013? Thanks in advance

Hello,
You should ask in the
Windows Phone forums on the Microsoft Community forums.
As the Microsoft Community is on a different platform, we cannot move the question for you.
Once there, click on Participate near the top of the screen, and select 'Ask a Question' or 'Start a Discussion'
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

How to record video or use screen capture WHILE capturing audio from Logic??

Hi,
I want to record my self playing guitar and singing using my mac book pro built in camera. I want the audio to come from Logic so I can add whatever effects I want to the vocals. When I say audio from Logic I don't mean recording in Logic and adding it in post. I want it to be on the fly.
What I used to do was use the screen capturing program Snapz Pro. I would screen capture a box around photobooth for the video, and then record while having Logic's audio in the background. It screen captures my entire computers audio. So for example if I get an aim message the bleep would show up in the recording. Or if I raise the volume or lower it the little click sound fx would be in it as well.
Capturing the audio this way let me get Logic's audio effects in my video on the fly. It worked out great....until now! :/
I just got the audio interface "Duet 2". And am using a microphone instead of my mbp's built in one. When ever I tried to record and capture my systems audio - my entire computer would crash. Snapz Pro won't work with the system audio with the interface. It works fine without it though.
I then tried to use Quicktime's new movie recording feature. I see it only gives an option for microphone and now system audio. So I got soundflower to re route the audio but that doesn't help either. This is because when you capture this way you can't hear anything while your capturing. So if I were to record a video and wanted Logics audio in it, I would have to set the output to Soundflower first. So when I record I cant hear myself which defeats the purpose.
So my final question is, how can I record video while having Logic's audio? I don't need to record with the mic, because in Logic the mic audio is going thru the system audio with everything else.
I would like to use a process more similiar to Quicktimes straight movie recording instead of doing an odd way like I used to screen capturing a box around the photobooth screen.
Thanks

use Yawcam from Yawcam.com

Unable to capture video with MSI StarForce 822 GeForce 3!

I have a MSI StarForce 822 GeForce3 graphics card with 64 MB DDR SDRAM on it. I have VGA Out, as well as TV-out (AV), TV-out (S-video), and TV-in(?) (S-video).
This brings me to two questions:
First, I have NEVER been able to figure out how to use the TV-in (S-video) port. I have tried numerous programs designed to capture video, including the one that came with the graphics card, and none of them recognize the card's TV-in. Do you have any recommendations as to how to use this port to capture video?
Second, in reading through the online manual for the graphics card on the company's website (under the name G3 Pro-VT64D MS-8822), I saw that the card supposedly has the capability of "High-quality HDTV/DVD playback" (8822 v2.0.pdf, page 8 ). However, in playing back DVD's through the card's s-video output onto my HDTV-ready monitor, I definately do not see HD quality videos. Could explain why this is the case?
I have an assignment coming up where I must do some video-editing work, and thus I am posed with a situation where I need to capture video using this card (and I can't afford to buy something new for the moment).
Thanks for your help.
Charles Bergmeier

If you have the Video Capture Driver installed then the video capture program should see it. On MSI site version 1.16 of the driver is available for download.
If you still have problems (e.g. too many frames lost) you can try using Virtual VCR (worked best in my case).

I upgraded to imovie 9 and now it wont recognize my sony dcr trv 25 movie camera. I have a conopus coverter that works to inport my video with an s cable but no audio. How do I get imovie 9 to recognize my camera?

I've been to the apple store and they thought my camera was defective but I can input video with my canopus con verter with the s cable . But it has no audio. Imovie 6 recognized my sony movie trv 25 camera and I imported without a problem. I can't find an rca to dv cable for this sony camera which would
let me use my converter box. Can I find and download Imovie 6 , import my movies and then import them to imovie 9???
thanks,
carol

I do not know that camera, but with many, there is a set scheme for the connections, to get things to work. It seems to differ by make/model, but many have found that just by changing the order of turning things on, and invoking the Capture module, things will usually work.
The connections are camera to computer via FW cable, then turn ON camera in proper mode, then launch PrE, then go to Capture. Users have found that their camera will require, say, plug-in, launch PrE, THEN turn ON camera, then launch the Capture module. As you can see, there can be variations in when one does each part of that chain, and it can make a difference. I would sit down with a pad and pencil, and test each possibility. If one works, that would be the scheme that I would then use.
Good luck,
Hunt
PS - the only thing that I would NOT do would be to turn ON the camera, prior to connecting via the FW cable. That can cause big issues.

Having a hard time lining up the audio to the video with FCPX.

Hi there
I'm having a hard time lining up the audio to the video with FCPX.
I'll just advise what I am doing.
I have recorded video of me playing bass guitar along to a song.
I have recorded the video in 720p with a DSLR.
I have recorded the bass guitar audio directly into Garageband (Using a USB interface) on a separate track to the song that I am playing along to. (It is played very well and is not out of time to the original)
I then mix the original song and the new bass guitar audio played by myself and export as an AIF in Garageband.
I import the video from the DSLR and AIF audio into Final Cut Pro X (10.0.5)
I can get the audio and video NEARLY bang on to timing, but its still ever so slightly off. As its ever so ever so slightly off it looks like I'm not really playing the bass guitar myself.
I'm moving the audio intricately but I just cant seem to get it lined up EXACTLY.
My camera picked up a tiny bit of audio so I can hear and see the audio wav on the video track to try and line it up with the audio wav of the AIF, but no matter what I just cant get it to line up and look exactly right.
Can anyone offer any advise or tips?
Thanks

Make sure you have Snapping switched off.
Expand the timeline to see the detail.
Rather than lining it up manually you could try the Automatic Audio Synch if there is any audio on the original video.

Capture audio and video files to seperate files

Forum,
Having suffered problems with OS 10.5 and Quicktime 7.4.1 I have done a clean install with 10. 4 .11.
When I select capture the following notice appears
"Audio only capture selected,video preview disabled"
In system settings "capture audio and video to seperate files " is NOT checked.
But that may not mean the same as the statement in in the capture window.
I have searched HELP and a book called" Optimizing your Final Cut Pro System" but can not find an answer.
Advice would be appreciated.
Thank you
Michael Craven

Hi,
Check this:
in Log & Capture window select Clip Settings tab and make sure video box is checked.
Cheers,
G.

I have an ipad, when I watch a video the audio does not match up with the video, how can I fix this?

I have an ipad and when I watch a video the audio does not match up with the video, how can I fix this?

Hello there, graciecloyd.
The following Knowledge Base article offers a few steps to try when an application is not functioning as expected:
iOS: Understanding multitasking
http://support.apple.com/kb/ht4211
If an app doesn't respond to your input, or doesn't perform as expected, do the following, testing after each step:
Check for app updates.
Force the app to close.
Restart your device.
Update your iOS device.
Learn more about troubleshooting apps.
On Step 2, close all applicaitons that are open. On Step 3, if the restart doesn't help resolve the issue, you may also want to try the Reset step in that article as well.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

After ATV2 5.0 update Netflix audio is not in sync with video

As the title says, on ATV2 after the 5.0 update, Netflix audio is not in sync with video.
Anyone else seeing this?

I spoke tooo soon.
Netflix audio is not in sync with video today as well. Any movie, it happens to all.

Export Video with Multiple Audio Tracks

I need to be able to export video with audio on multiple tracks. I have moved to CS6 from FCP 7 where this was rather easy to do. I can make a preset in AME with more than enough mono tracks but after the encode the video is always smashed to one mono track. I am not doing a 5.1 mix, there are different mic's on each track that need to remain independant of one another and mixing them down within Premiere is not feasable. Are there no options to just have the audio 'pass through' like Compressor? Sorry if there are other posts but I have been searching forever and can not find a simple answer on this topic.
Also, is there no way to have the source timecode burn in? Putting a filter on the video in a sequence is unacceptable, I am very displeased to find that this doesn's seem possible in AME or Premiere, it has been part of Apple's suite for years.
Example of my preset from Compressor:
Name: Apple ProRes 422 (Proxy)
Description: QuickTime movie with Apple ProRes 422 (Proxy) and audio pass-through
File Extension: mov
Estimated size: unknown
Audio: multi-track pass-through
Video Encoder
          Width: (100% of source)
          Height: (100% of source)
          Pixel aspect ratio: Default
          Crop: None
          Padding: None
          Frame rate: (100% of source)
          Frame Controls: Automatically selected: Off
          Codec Type: Apple ProRes 422 (Proxy)
          Multi-pass: Off, frame reorder: Off
          Automatic gamma correction
Progressive
          Pixel depth: 24
          Spatial quality: 50
          Min. Spatial quality: 0
          Temporal quality: 0
          Min. temporal quality: 0
Timecode Generator
          Position: Lower Right--Title Safe
          Alpha: 1.000
          Label: Source Timecode
          Start Timecode at 00:00:00:00 false
          Text Color: r:0.0000, g:0.0000, b:0.0000
          Font: Helvetica, 36

Hi James,
For exporting a multitrack .wav file, you have to start a project with a multichannel audiomaster (3-16 tracks).
Copy and paste your complete edit to the new editsetting.
Now in the audiomixer you can route your audiolayers to the multichannel you like.
(CH1+2 pan to left is channel 1, pan to right is channel 2 and for a stereo track pan to center : channel 1 for left and channel 2 for right.)
Then you export your project to a 3-16 tracks multitrack .wav file.
When you need mono tracks you can import your multitrack .wav file in premiere. Then send it to Audition (edit in Audition) and then adobe will convert the file into mono tracks.
You'll find the mono tracks in your audio capture folder or can premiere search for then by 'reveal in explorer'.
The multi track .wav file has got timecode within the file.
When exporting in QT you can also choose for a multitrack audio file. It also contains your timeline timecode.
.avi or .mp4 video files cannot be exported with more than 5.1 channels of audio
MXF OP1a in XDCAMHD can also be exported with max. 16 channels of audio. It also contains your timeline timecode.
Hopefully you can get further with Premiere Pro with this info.
Succes with it!!
gr. Mano

WTK SDK 3.0 for OSX problem with capturing audio, emulator

Hello all,
i'm installed the WTK SDK 3.0 for osx and everything works well. Some test applications also work.
Now I'm trying to realize my project and get strange error.
I want to capture some audio form the microphone. But when i do so the Emulator strikes with this error:
javax.microedition.media.MediaException: Player cannot be created for capture://audio
so i tried this: System.getProperty("supports.recording") and it returns false. But when i read over the specification of the WTK it says that it should support the Audio capturing. Is this error based on the implementation of the WTK on OSX or have some Windows users also the same problem?
here is my implementation for the Audio recording:
public void commandAction(Command comm, Displayable disp){
        if(comm==recordCommand){
            try{
                p = Manager.createPlayer("capture://audio");
                p.realize();
                RecordControl rc = (RecordControl)p.getControl("RecordControl");
                ByteArrayOutputStream output = new ByteArrayOutputStream();
                rc.setRecordStream(output);
                rc.startRecord();
                p.start();
                messageItem.setText("recording...");
                Thread.currentThread().sleep(5000);
                messageItem.setText("done!");
                rc.commit();
                recordedSoundArray = output.toByteArray();
                p.close();
            } catch (IOException ioe) {
                errorItem.setLabel("Error");
                errorItem.setText(ioe.toString());
            } catch (MediaException me) {
                errorItem.setLabel("Error");
                errorItem.setText(me.toString());
            } catch (InterruptedException ie) {
                errorItem.setLabel("Error");
                errorItem.setText(ie.toString());
        } else if(comm == playCommand) {
            try {
                ByteArrayInputStream recordedInputStream = new ByteArrayInputStream
                      (recordedSoundArray);
                Player p2 = Manager.createPlayer(recordedInputStream,"audio/basic");
                p2.prefetch();
                p2.start();
            } catch (IOException ioe) {
                errorItem.setLabel("Error");
                errorItem.setText(ioe.toString());
            } catch (MediaException me) {
                errorItem.setLabel("Error");
                errorItem.setText(me.toString());
    any help would be grateful!
thx and greetings
Edited by: nYmou on Jun 1, 2010 3:44 AM

Note: This thread was originally posted in the [Sun Java Wireless Toolkit|http://forums.sun.com/forum.jspa?forumID=82] forum, but moved to this forum for closer topic alignment.

Capturing audio as well as video with a sony AVCHD handycam

Similar Messages

Maybe you are looking for