Capturing Betacam SP PAL for storage

Dear board members!
I need to capture about 2000 hours worth of Betacam SP footage to "update" our archival footage house library. Most probably I would be digitizing through my Sony DVCAM deck... Now, I am trying to figure out what's the best format for digitizing. Should I just stick to DV codec? Or should I go up to DV50? Or should I use some other codec? Money is issue... Because even with DV, I would need about 26 TB of RAIDs...
The footage is a mix of old film transfers and Betacam SP original footage.
All suggestions are welcome. Thank you!
Tim

All depends on how important the stuff is to you and how and how soon it may ever be used again.
In a few years when everything is HD or or super dupper HHHHD or whatever, I can't imagine that you'd be much further ahead cutting in some archival Betacam as opposed to the same that's been captured as DV50. But again depends how it'll be used.
Of course if this stuff is somehow historically important, You'd want to do all you can to preserve it the best way possible.
Ultimately, it sounds like money is going to be your deciding factor, so go with what you can afford and make sure you come out of the betacam deck component. And hang on to those tapes. After getting an amazingly good dub off some 30 year old, badly stored 3/4 stuff last year, I'm still an oxide fan.
rh

Similar Messages

Report for Storage location wise Stock with value..?

Hi guru's
Can anybody explain me what is T.code i want to use to get a report for STORAGE LOCATION STOCK with VALUE..?
Urgent reply me ..
Thanks
sap-mm

Sorry Mr chetan,
I want to see only the stock available in my company with Value and storage location wise..
Please try to get report for this
Thanks
sap-mm

How can I use iCloud for storage without duplication problems?

I recently set up iCloud to use on my Mac and PC. With the exception of a single data file that I have stored in the cloud (as a working data file) that I use both on my Mac and PC....I want to use the rest of my 20 gigs of space on iCloud for storage/backup purposes only. However, I have very little experience with iCloud; and it doesn't seem entirely intuitive to use iCloud.
For example, if I store all of my music and pictures on iCloud, how do I stop Itunes and iphoto from duplicating the results of each music and picture file in those programs? I ask this question because I have seen iTunes act up way too many times (in other circumstances) when it creates duplicate music files.
Just to be clear, I want everything to remain on my local hard drive. I only want to use iCloud for storage/backup only. So, again, how do I stop iTunes and iPhoto from reading music and photo files once I successfully get them on iCloud? (I am thinking I have to hide the archived files once I get them in iCloud, but unsure about how I go about doing that). And here's my second question. To upload my personal music and picture files to iCloud, can I simply drag and drop them into the iCloud drive on my computer and assume they will be successfully uploaded?
My second question seems kind of basic too. But, once again, iCloud does not seem entirely intuitive to use for a beginner. For example, I recently purchased some music from the Itunes store. And while I have it downloaded on my harddrive (like I wanted it)......I don't see it on the iCloud drive (on my computer)....nor do I see it when I log into icloud.com on the web site. Thanks for any replies.

If you have a Mac signed into your account running iPhoto, you might want to check iPhoto>Preferences>iCloud to make sure Automatic Upload isn't checked. If it is checked, all new photos added to iPhoto are automatically added to your photo stream.

Can i use the time capsule for storage or just backup?

I asked my husband to go and buy a separate harddrive so that we could use to store all of our photos on separately as opposed to the computer (as its full and we cant download any more photos!). He came back with the Time Capsule.
from what i can understand it can only be used for backups and not for direct stoarge - is this correct? Im hoping that i can use it for storage and somehow copy all my photos from my Mac onto the Time Capsule and then we can access them from the network which i just created with the Time Capsule
Or do i need to buy something else?
appreciate anyones help
Thanks

It is far from ideal. But it does depend on what you are doing. Are you going to store you iphoto library on the TC then it is not recommended.
Store files on the TC.
https://discussions.apple.com/message/24380694#24380694
This is asked several times a day.. obviously people are struggling with their latest SSD being too small.
The TC is not suitable for network file server.. but many people having no choice press it into service as such.
It cannot be partitioned. It was and is and ever shall be a backup device for Time Machine.
Major issues.
1. No backup.. no way Time Machine can backup a network drive. No place to backup to.. So all your files will be at risk. And you will need to buy a third party like CCC to do backup.
2. The TC cannot be partitioned and mixing TM backups and data is not great.
3. The drive is slow to spin up and quick to spin down.. there is no controls.
4. iPhoto in particular can easily corrupt its entire library with wireless networking causing a disconnection to one photo. Even if you do this;;; do not move your photo library... you have been warned!!
5. iTunes will constantly lose connection to the library. The disk is too slow to respond.. itunes on the computer will constantly spit out errors. Even in the midst of streaming the TC can spin down the disk due to caching.
6. Do not use any live files on the TC no matter what else you do.. if you edit files in whatever program the file must be on the local hard disk.
7. The only suitable location for most libraries is a computer. You can plug in an external hard disk.
Read pondini for some work arounds.
Q3 here. http://pondini.org/TM/Time_Capsule.html

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is stil

My Windows 7 Professional desktop system hard disk got corrupted and I took the opportunity to install an SSD for a new system disk and reinstall Windows. The system is up and running on the SSD, with my old system disk now used for storage as it is still readable. The only Adobe product I have reinstalled so far is Reader XI but I would like to reinstall Elements 8 and Acrobat 9 without taking up more licences as both are also installed on my laptop. Can you point me to the best way to do this? - Thanks

If you have the two allotted activations already and one was lost on the hard drive that failed then you need to contact Adobe Support thru chat and ask them to reset your activations.
For the link below click the Still Need Help? option in the blue area at the bottom and choose the chat option...
Serial number and activation chat support (non-CC)
http://helpx.adobe.com/x-productkb/global/service1.html ( http://adobe.ly/1aYjbSC )

[Athlon64] CPU cant see my other HD I want to use for storage

Ok so I have the msi k8n-neo v with 3000+ athlon 64, Im running win xp 32, I had too much problems with win xp 64 ( wasnt running my games well ) ANYHOO... I have a 120 gig sata WD HD, now I have this other HD WD 40gig but its not SATA. It has windows installed on it already, I just want to use it for extra space maybe a new partition for storage, and I hook it up and my CPU doesnt even see it. Most cases I cant even boot it up. It goes to my logo screen and stays there. IF i hit tab I can go to this other menu, but cant make any choices and it scans my hardware. I even tried running my win XP setup disc but I think its asking for my driver boot disc. Im just afraid to use it cause I dont want my main HD to lose any data or become corrupt where i have to re-install windows AGAIN for the 6th time in the last two months LMAO. Anyway I THINK (prolly wrong) that I have the little slave/master doohicky in the wrong spot. I have tried it in every single spot but I still cant get past my logo screen. the 40 gigger is hooked up to the MOBO from one IDE cable its not a slave on that cable just one cable from the HD to the MOBO in slot two. Slot one is occupied by my dvd rom and my cd rom. Can anyone help me out on this one? Im still kinda new to all this but learned a hell of a lot in the last year!!!!!!!!

...put the SATA drive in and start it up to make sure it's still working...if it's OK, shut it down...
...remove the jumper from the Western Digital 40GB drive...connect it to the far end of an IDE cable...connect the other end to your motherboard...start your machine...
...after Windows boots click Start > right-click My Computer > Manage > highlight Disk Management in the left pane > see if the 40GB is there > it should be > click the drive in the right pane > Action > All Tasks > Format...after Fomat you may have to go back to Action > All Tasks > Mark Partition As Active...

Time Machine no longer recognizes my WD portable drive for storage

The portable drive use to work fine for storage for my time machine. Now the drive does not show in desktop when plugged in. Time machine is directing me to set up but does not recognize any device. Thank you for any help.
J.

Same exact thing happened to me... Time Machine ceased to recognize external drive - stopped backing up (obviously) then drive would no longer appear on desktop. After multiple reboots, plug/unplug, and cable jiggling - the drive returned to the desktop... Time Machine STILL does not see it. Using Disk Utilities to verify - hopefully repair. Many errors appearing in log! Isn't it a little odd that so many external drives of different models are all failing while using the same program... ?

System asking for storage location in case of Asset GR,

dear all,
In our case system is asking for Storage Location in case of Asset GR, though PO was account assigned.
I checked for the screen setting, but not getting any clue where to find that entry to make depressed.
Pls guide,
Regards.

Hi,
Are u using material code for assets or its a text based purchase, if material code is there (although non valuated / qty managed) it will still require sloc as system needs to store the qty in stock
Reg
dheeraj

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it show

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

I worked with files in LR that were originally on my C drive, then were moved to an external HD for storage. I now want to do some more work on those files (which have the same file name as on the C drive). I plugged the drive into my computer and it shows in LR under folders as the F drive and the little green light is on, but LR is showing only the first 6 files and not the remaining 200 or so. How do I expand the F folder to expose all files?

Use of Vendor and Customer in 'Define Shipping Data for Storage Location"

Under the stock transfer order configuration, there is a IMG step "Define Shipping Data for Storage Location".
In this at storage location level, we can assign, sales org/distribution channel, division and VENDOR and CUSTOMER to storage location.
The customer number is used a sold-to-party in outbound deliveries.
But I am not able to figure out what's the use of VENDOR number we are specifying in this step.
If I am assiging the VENDOR Number here to every storage location, then when I am creating cross-company code Stock transport order, which vendor code I will select the one assigned to PLANT or one Assigned to Storage location.
Also I need to know what vendor account group I will use for creating this storage location vendor. I have more than one storage locations) under one plant. Soif I used account group as "0007" plant, SAP doesn't allow me to assigne one plant code to 2 vendors and in vendor master on 'additional purchasing data' screen I am not seeing storage location field, it has only 'PLANT' field.
So I need to know-
1. Which account group to use for creating storage location vendor
2. What's the ultimaye use of this vendor code
3. What vendor # I will use while creating cross-company PO (one for plant or one for storage location.
Thanks

Hi,
Define Shipping Data
Here in this step you maintain the customer number of the receiving plant. This customer number is used in SD shipping processing to identify the goods recipient (ship-to party) if stock transfer to be carried out with an SD delivery
A goods receipt can be planned in the receiving plant.
You can enter a vendor (transport vendor) in the stock transport order
In IMG step "Define Shipping Data for Storage Location".
You can assign sales org/distribution channel, division and VENDOR and CUSTOMER to storage location through Plant only.Means this Vendor is created for entering in the STO .This vendor is created for the the Plant (Supplying Plant)so as u can create STO.
Rewards If usful
Regards
Sanjay L

What is the best external hard drive for macbook pro I think I want firewire for storage and usb for time machine

I have a macbk pro. I think a usb external drive would be fine for time machine but I'd like a fire wire external drive to store files.
Any recommendations on brand? The last recommendations were dated 2006/7
I have been waiting for a 1TB g-drive. Apparently they are special order. I did not think I needed anything larger than 1 TB to backup the 500GB internal drive.
I thought I'd get something bigger for storage. From what I have read I think its best not to partition the drive for backup and storage.
Also I'd like to have a bootable copy of my internal hard drive is that possible?

Don't know about the Best... But I have been using these without any issues...
LaCie quadra D2 for Manual Backup and Clone Backup
LaCie Rikki for USB Time Machine
For Bootable Backups See
SuperDuper http://www.shirt-pocket.com/
CCC http://www.bombich.com/

Control data for storage type is missing Message no. L3006

Dear Mates
i am trying to create a transfer order from delivery. the moment i click on save in LT03 its giving me the error message as
Control data for storage type is missing
Message no. L3006
i have explored every thread regarding the same issue and also implemented some measures like
-> extending the material to particular warehouse and maintaining stock removal and stock placement strategies in it(i created new one from MM01 itself)
-> going to spro path SPRO->Logistics Execution->shipping->picking->Lean WM->Define storage type. and assigned storage type.
but still i am getting the same message in LT03
can you please help me out on this.

Please take a look at the following links and see if they will help at all.
Error on creating a TO - Control data for storage type is missing
"control data for storage type is missing"
Kind Regards,
Jason

"control data for storage type is missing"

Hi Guys
I am trying to create a goods receipt for an inbound delivery.
I created the inbound delivery VL31N - sucessfully
But when trying to create a putaway LT0F - error
control data for storage type is missing. msg no. L3006
Do i maiantain this control data for storage type in the Material master?
is there anything Im doing wrong?
Can someone help please.
Thanks in advance for the help.
Ahmad Yahya

Hi,
Check in SPRO > Logistics Execution > Warehouse Management > Master Data > Define storage type, here for your warehouse and storage type check stock placement and stcok removal control is configured.
Regards,
Prabu

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB

Been using an Avastor HDX-800 for storage and backup, also a SUPERDISK for smaller stuff; recently the SUPERDISK does not appear on the screen, and the light blinks while you hear it spin, also the Avastor has started to have the same problem, both USB conncected, both worked well before, but both now spinning, blinking, and not showing up on the screen as before,
Interestingly they both appear in the System Profiler, but just not working the same as before
I have tried other USB ports, but the same responce,

yes I did reset the PRAM, but no benefit, still the same problem
my usb devices are: keyboard, mouse, printer, SD-USB-M3, and LaCie d2 DVDRW:
the mouse and printed are plugged into the keyboard: i have tried to move, these around, and have even tried just the mouse, printer and SD-USB-M3, but still the same problem
here is a cut and paste of the current "System Profiler>Hardware>USB"   (usb device tree)
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x18
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
Hub in Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x1002
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
HL-1270N series:
Version:          1.00
Bus Power (mA):          100
Speed:          Up to 12 Mb/sec
Manufacturer:          Brother
Product ID:          0x0008
Serial Number:          L9J286292
Vendor ID:          0x04f9
Basic Optical Mouse:
Version:          0.00
Bus Power (mA):          100
Speed:          Up to 1.5 Mb/sec
Manufacturer:          Microsoft
Product ID:          0x0084
Vendor ID:          0x045e
Apple Pro Keyboard:
Version:          1.22
Bus Power (mA):          250
Speed:          Up to 12 Mb/sec
Manufacturer:          Mitsumi Electric
Product ID:          0x0204
Vendor ID:          0x05ac (Apple Computer, Inc.)
SuperDisk USB 120MB drive:
Version:          0.0e
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          Imation
Product ID:          0x0002
Vendor ID:          0x0718
USB Bus:
Host Controller Location:          Built In USB
Host Controller Driver:          AppleUSBOHCI
PCI Device ID:          0x0026
PCI Revision ID:          0x0000
PCI Vendor ID:          0x106b
Bus Number:          0x19
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f
LaCie d2 DVDRW USB:
Capacity:          451.76 MB
Removable Media:          Yes
Detachable Drive:          Yes
BSD Name:          disk2
Version:          0.00
Bus Power (mA):          500
Speed:          Up to 12 Mb/sec
Manufacturer:          LaCie
OS9 Drivers:          No
Product ID:          0x1011
Serial Number:          FFFFFFFFFFFF
S.M.A.R.T. status:          Not Supported
Vendor ID:          0x059f

How to capture the execution plan for a query

HI All,
Can anyone please help me in finding out the command to capture the execution plan for a query.
Execution plan for select * from EMP where <Condtions>
it is getting executed successfully but i need to get the proper execution plan for the same.
Thanks

971830 wrote:
i want to know where execution plan gets generated??
in PMON of server process or in shared pool??
i know that optimixer create execution plan..It is stored in Library Cache (present inside Shared Pool ).
select * from v$sql_plan;An absolute beautiful white paper :
Refer this -- www.sagelogix.com/sagelogix/SearchResults/SAGE015052
Also -- http://www.toadworld.com/KNOWLEDGE/KnowledgeXpertforOracle/tabid/648/TopicID/XPVSP/Default.aspx
HTH
Ranit B.

Capturing Betacam SP PAL for storage

Similar Messages

Maybe you are looking for