Capturing camera feed without FMS?

Hi, I'm not sure if this is the appropriate place to post this, but I was wandering its possible to build your own Player in Flash?
The situation is: I have an external digital camera, and i need to capture its contents and display it in a player/window. This will all be on a local machine. I don't need to record anything, or stream it to other machines..... I just need the player to be able to display what ever the camera is displaying. Kind of like the Live Encoder (input and output views). With that I could hopefuly embed the player into other applications.
Can this be done without having to involve the FSM?
If so, can anyone point me to some tutorials on that?
Many thanks!

Hello sir.
i am using flash live encoder as per Mr. tom green say's we need flash media server (FMS) to stream video from flash media live encoder (FME), I have a quastion that is both FMS & FME were instaled in one laptop can we stream video on my website or we need dedicated server for FMS to install please give any suggetion about this. you send a mail to [email protected]
thanks

Similar Messages

  • Mutliple camera feeds, different qualities: How to reduce live stream quality for mobile users??

    My issue is I have multiple cameras from users and some are on mobile devices, so I want the mobile users to receive a different quality feed.
    I've tried using receiveVideoFPS to no avail (apparently H.264 can't / won't ever support this feature....)
    Can feeds be received differently so that if one users has an HD camera feed, the mobile guys not choking his connection and cpu trying to pull it down?
    Any help or ideas would be greatly appreciated.
    Thanks so much.

    1) any practical use of P2P multicast will have a delay measured in seconds. it shouldn't go to 30 seconds unless you have a large NetStream.bufferTime.
    2) i strongly recommend against changing the multicast stream parameters. they all interact with each other. decreasing the window duration will decrease the effective reliability of the stream, by reducing the amount of time to receive all of the fragments of the stream as they pass through the P2P group -- especially when people join or leave the group, which can disrupt the low latency "push" trees that are constructed in the group.
    3) you should be able to change the encoding parameters on the fly without a major disruption. are you using H.264 or Sorenson Spark?  it's possible that your camera doesn't like to have its capture size changed and it is freezing temporarily.  i'm not having any trouble changing the capture size with my camera (and using H.264).  i recall there being some issue with changing the frames-per-second on the fly (at least some time ago, and i don't remember what the issue is) -- there was enough of an issue that i disabled it in my little app while actively publishing.

  • How do I delete photos in camera roll without deleting in albums?

    How do I delete photos in camera roll without deleting in albums?

    Sorry that is not possible because the album uses a backup from camera roll,so if you delete any photo in camera roll it will be delete the same picture in the album.
    Thanks

  • Is there a way to open Adobe Camera Raw without Photoshop starting?

    Is there a way to start up Adobe Camera Raw without Photoshop starting?  I think in the past it started without Photoshop starting; or did it?

    If you select the image in Adobe Bridge you can choose File > Open in Camera Raw. Adobe Camera Raw will open the image using Bridge as the host application and you won't have to start Photoshop. There's no way to open Camera Raw without a host application.
    If you can't find Adobe Bridge on your computer and you are a Creative Cloud subscriber, Bridge is one of the programs you can install using the Creative Cloud application.

  • How can I remove photos from my camera roll without deleting them from an album?

    I have some photos in an album and also copies on my camera roll in. photos on my ipad2. I want to remove/delete from the camera roll without deleting them from the album. As far as I can see, when selected from the camera roll for deletion I am asked if I want to remove the photos from all locations - with no other options??
    Thank you for your help
    ian

    Which iOS version are you using?
    Are you also using iCloud?

  • How can i delete a picture from camera roll without deleting everywhere

    how can i delete a picture in camera roll without deleting everywhere

    You can't, when you 'copy' a photo into an album that you've created directly on the iPad then you are effectively just creating a pointer to the photo and not creating a second copy of it - so if you then delete the original photo from your iPad you will also be deleting all pointers to it and therefore removing it from other albums.

  • Mozilla won't display web cam feed from web site

    Mozilla won't display web cam feed from web site: http://www.fs.usda.gov/wps/portal/fsinternet/!ut/p/c4/04_SB8K8xLLM9MSSzPy8xBz9CP0os3gDfxMDT8MwRydLA1cj72DTUE8TAwjQL8h2VAQAMtzFUw!!/?ss=110803&navtype=BROWSEBYSUBJECT&cid=fsm9_029107&navid=091000000000000&pnavid=null&position=Not%2520Yet%2520Determined.Html&ttype=detailfull&pname=Chattahoochee-Oconee%2520National%2520Forest-%2520Home
    I have the latest Java software and can load the above feed in IE but not Mozilla. I can also load a similar Java feed from
    http://www.brmemc.net/brasstown/ in both IE and Mozilla.

    (Glad to see you're still lurking around here, Wyrenut.  Your posts have helped me tremendously.  And this comes form somebody who has run and internal developer's support group for quite a few years.)
    I also started having this problem after getting my TX hooked up through my home network.  I had to set up a wireless access point with only WPA security to get around having to change the WPA2 security on all my other equipment.  I applied the ESU upgrade, but that didn't seem to help with WPA2 Personal.  Previously, I could get at least half of the pages to come up through the open hotspot in the lobby of our building at work, but I haven't tried that since I applied the ESU upgrade this morning.
     I can get to the internet through the access point using a laptop, and I can see the IP address of the Palm coming through the access point on the router's admin page, and the DNS addresses of the PC and the Palm are the same.  So I think I'm through, but every page I try gets the 'Page not available' message, even if I enter the IP address of the page rather than the URL.
    Is there any other method of debugging available to see if the page is really coming back and locking up Blazer, or whether it's really not coming back at all?  Or any other suggestions? 
    Personally, I sort of liked the old Internet Explorer that counted off how many K were coming through as the page was being loaded.  At least you could tell something was happening.
    Thanks,

  • Is it possible to use smartseek functionalities without FMS(flash media server)??

    Hi,
        Is it possible to use smart seek functionalities to play files local files without using flash media server(FMS).
        I am currently using videoDisplay components but can switch to netStream component if it is possible without FMS.
        As I have to seek frame by frame but the current seek() function doesnot provide that functionality.
        Any kind of suggestion is most welcome.
        Thanks in Advance.

    I'd like to revive this topic as I just purchased an ATV. I do like it but I am becoming very familiar with the limitations of the ATV.
    I used to have a Snyology NAS server but it did not serve/stream the iTunes well enough to my stereo. I have a lot of photos of my children as well as movies and wanted to see more of them so I purchased the ATV as I knew the Syno server/NAS would be bricking soon.
    Once the ATV is loaded it is fine for that content. But if there is other content on other computers well, they have to stream and the content on the ATV is not accessible to anything other than the stereo or TV that the ATV is connected to. So, finally, here is my question:
    Which NAS streams VERY WELL with the ATV? Correct me if I am wrong but the NAS has to have iTunes imbedded within the server; yes? Secondly, is the best solution for serving an ATV as well as having all media content accessible to all LAN computers a Mac Mini?
    So which is it? Please recommend an NAS that can serve iTunes media (music, photos, video) to an Apple TV or is the best solution a Mac Mini which acts like a NAS and streams all media content to the Apple TV and ATV will stream it to HDTV through HDMI , etc.
    The ATV is great with the High Def.., wide screen, Dolby 5.1, HDMI port , etc. Just need a way to have the media accessible to everyone on the LAN as well as serve/stream to an already purchased Apple TV.
    Thanks for the help,
    Cc

  • Can you directly organize the photos in the iPhone camera roll without a third party app

    Can you directly organize the photos in the iPhone camera roll without a third party app

    Yep.
    http://heresthethingblog.com/2013/06/25/ipad-iphone-tip-create-photo-album/

  • I made an album just now. I went back to delete the pics from my camera roll but my only option is to "delete everywhere." I want to leave them in the new album I made..  How i can delete them from camera roll without deleting from other Album i made

    I made an album just now. I went back to delete the pics from my camera roll but my only option is to "delete everywhere." I want to leave them in the new album I made..  How i can delete them from camera roll without deleting from other Album i made

    The way that I understand that it works, is that the photos are not copied into the new albums, instead it just points to the photos - the number of photos on the iPad in Settings > General > About doesn't increase when you create new album so I assume from that that it isn't copying the photo, just pointing to it. So if you delete the photo from the camera roll you will therefore also be deleting all the pointers to it

  • Continuous fft of camera feed not working

    I'm very new to LabView, and I've been working on a project for an upcoming experiment in my lab at my university. I'm trying to use Fourier analysis of an interference pattern to measure the shift of the fringes. I modified the low-level grab vi to include a continuous FFT of the image acquired from a camera feed, but the FFT appears to be outputting nothing. Can anyone tell me what I'm doing wrong?
    Attachments:
    interferm.llb ‏182 KB
    Interferm_Block_Diagram.PNG ‏35 KB
    Front_Panel.PNG ‏63 KB

    Hi Vaeryn,
    If you're still having problems could you tell us a bit more about your system (Hardware, Software, etc.)? In the meantime I was able to find this:
    Continuous Grab with FFT Mask:
    https://decibel.ni.com/content/docs/DOC-25276
    I hope this helps!
    Kale W.
    Applications Engineer
    National Instruments
    [email protected]

  • IP camera feed not available anymore with iOS6. Not working on a any browser anymore. What's wrong?

    After updating to iOS 6 on iPhone 4, I can't see my IP camera feed on any browser available (As I used to do on iOS 5.1.1 and was working fine)
    On the other hand, there isn't any app that supports SITECOM IP cameras feed.
    So what's the deal? Waiting for an update or what?

    I'm having the same problem.
    With the recent release of Safari 6.0 for MAC, we have are having problems streaming video.  We were able to with previous versions of Safari on both MAC and Iphone.  We used the following URL:  http://74.95.30.43/display_pic.cgi?cam=1&res=hi&audio=off&refresh=16000628090
    This URL will stream with Mozilla Firefox on the MAC but not Safari 6.0.  This wasn't a problem up until now because we could just use Mozilla Firefox.  However, Firefox is not available with the Iphone & Ipad.  On the Iphone & Ipad, we just get a "still image" and the image does not refresh.
    Any assistance will be greatly appreciated.

  • Can you delete a picture in your camera roll without deleting it in your albumn?

    Can you delete a picture in you camera roll without deleting it in your album?

    No, it has to be in your Camera Roll to be in your album. Sorry.

  • Capture camera won't get recognized by computer via firewire

    I'm running on OS 10.7.5., the mid 2011 iMac and I have both iMovie and Adobe Premiere cs5. I'm filming with a Sony vx1000 and using a Panasonic GS80 to capture via the Firewire 800. Neither the capture camera nor the vx1000 seem to get recognition from the computer at all, in either program. I've tried both the cameras on a MacBook running on 10.8 which is Mountain Lion, and neither worked. I've been reading that it has something to do with Lion, but I just want a clear answer for myself. So has anybody had this same problem, or does anybody know how I can work around it or fix it?
    This screenshot is with the camera plugged in, so I'm guessing the problem lies within the firewire port itself?
    And this is the only option it gives me in iMovie. In Premiere there is nothing.

    Have you tried restarting the computer, and ensuring no other apps are using the camera?
    I have worked in the production industry for years and have experienced many a blown FireWire port. I'm not sure if they have fixed this issue, but I know, at least it used to be, that if you plugged in your items in the wrong order you could blow your port.
    Check this out: http://www.focusrite.com/answerbase/en/article.php?id=1063
    And here's some troubleshooting tips for FireWire: http://support.apple.com/kb/HT1151
    Finally, here's an (old) post with some more info: http://www.lafcpug.org/phorum/read.php?1,191535,191688
    Cheers,
      -Kyle

  • Motion capture camera

    Hello Guys
    My name is Deependra, I am new to the software lab view and I am trying to understand it, I work at a lab at the UM Dbn campus and here we' re trying to conduct a study on musculoskeletal disorders, in this, we' re trying to control the motion capture cameras with LabVIEW, I am trying to find the basic VI codes for this task, along with that, if anyone of you can give me some suggestion in this regard, I would really appreciate it. 
    Thanks in advance
    Cheers
    Deependra

    We' re conducting a study on musculoskeletal disorders caused due to prolonged sitting, it's a project based on ergonomics, for that our quest to integrate all the components that we' re using, now these components inc a motion capture camera, the other hardware like force plate and emg, we have been able to calibrate them and integrate with LabVIEW, its' the motion capture camera, that we' re having issues with, so, I was hoping that if there's any VI code or any other source, citation from where I could get get some information on how to accomplish this. 

Maybe you are looking for