Capturing clips

hey i'm capturing individual clips from one tape. I set the in and out points but when i hit to capture clip, it loads but then says the tape isn't working. how can i capture clips?

What are you capturing? What are you capturing from?
Capture Clip only works if you have Device Control and that only works if you are coming out of a DV/HDV camera or deck. If you are going through a converter like a Canopus or daisy chaining thru some other device, you will be restricted to Easy Setup DV Convertor and Capture Now
Having said that, if you should have device control, make sure that everything is properly connected. Make sure your cam is in VTR mode. I would should down the computer completely and set up your connections, with the cam on, then fire it all up again
Also, Capture Clip requires some pre-roll; if the clip you want to capture is right at the head of the tape ... or the out point is right at the end of the tape .. it isn't going to work. You may have to use Capture Now.
Capture Now may be an alternative if nothing else works

Similar Messages

Blue screen of death, surprise restarts, and some captured clips distorted, with blocky artifacts!

Hello,
I've been using my set-up (Premiere Pro 2.0* with Cineform AspectHD) successfully for years, to capture and edit footage. But just recently, my computer has given me the blue screen of death after capturing for about 5-10 minutes or caused my computer to restart in the middle of capturing. I've also noticed that the resulting captured clips are, in some places, distorted and contain blocky artifacts. It isn't a problem with the tape because the footage plays just fine on the camera's preview monitor. I tried re-installing Premiere Pro 2.0 and Cineform AspectHD, but the problem persisted after a successful, but brief capture session (the resulting clips were still distorted and contained blocky artifacts). I have no idea what the problem is! One solution I attempted was to capture on another computer in my house, using the same software. Although I didn't get the blue screen of death or a surprise restart, the captured clips were still distorted and contained blocky artifacts in some spots. Another option I tried, with the second computer, was deselecting the Scene Detect option in the capture dialogue box. As a result, the captured clips are free of distortion and blocky artifacts, but the problem is that the captured clips are too big and very difficult to manage (I shoot a lot because I'm a filmmaker and I'm in the middle of a big project). Why is this happening?!
Any help with this problem would be greatly appreciated!
*I'd use a later version of Premiere, but I spent a lot of money on Cineform AspectHD and the version of Cineform I have only works with Premiere Pro 2.0.

I agree with John T. BSOD's are most often caused hardware issues, such as overheating of a component, or a failing, or undersized PSU.
Also, general system drivers can cause failure. Often, those are outlined (though maybe not in really adequate detail) in the Event Viewer's log. In that article, that John T. linked to, there is another link to "Finding Clues." It goes into more detail on using Event Viewer to explore warning, or error messages. If your testing of your system's components and heat, do not yield a weak link, see that one (no pun intended). It is in Reply # 3.
Good luck,
Hunt

Is it possible to delete the audio of a captured clip permanently?

I know you can drag clips to the timeline without audio, or delete the audio from the timeline.
What I'm asking is: say you captured a bunch of clips with audio tracks that you didn't want, because you forgot to uncheck the audio box.
Is there some way you can delete the audio from the captured clips, without re-capturing everything? I'd like to have them sitting in my browser, without any associated audio.
I know you can change whether audio is present in a logged (but uncaptured clip) using clip settings, but that only works before the clip is captured.

Just think about this for a minute before you launch
yourself off into this realm. The audio doesn't
really take that much space. DV video runs at 3.6
MB/sec 48khz audio runs at 192kB/s. The audio takes
up nothing.
You're right - it's not worth the effort. It's just a minor annoyance. It would be easier to just recapture all the clips.

TS3391 iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project.

iMovie 11 is not working. I try to open it and it says it is generating thumbnails for one of my previous projects. All the commands are gray. I have to force it to quit. I just want to capture clips to start a new project. I googled the problem and there were discussions about deleting files in various folders and renaming clip extensions. I don't like the solutions I saw there and I am not sure they will work.

Nobody replied so I called Apple. They seemed to think they could fix the problem but I had to agree to pay about $20 first. I told them to put it down as a complaint. I only want to use the software I bought. I can't see that it is my fault it is malfunctioning. I guess I will have to pay. It doesn't seem right.

Batch List: How to capture clips inc info, from disk instead of tape

We have a client's edit log on Excel, including reel no, in/out, scene, description, log note etc. Usually we import this batch list to FCP, then batch capture from DVCAM tapes, so all clips have all their info - great.
In this case, the material is already digitised and the client has logged from DVDs burned with timecode from the digitised material being placed in FCP sequencecs with timecode generator filter.
Is there a way to 'batch capture' clips from the digitised material, so that we keep all the client logging info, as we would if we were capturing from tape?

Shane has got it right - we want to automatically build a sequence using that batch list. Or somehow have FCP make new clips or subclips from already captured footage... so if your verdict is right Shane, looks like we may have to go the manual route...
although - just occurred to me - for each clip, I could go to the digitised source sequence, duplicate it, open copy in timeline, enter clip's in and out tc in the viewer - and that will give me a copy of each clip as a sequence - rename that sequence as per the clip, and we're done.
But it's still of course more laborious than batch capture from tape; this is a concern going forward as we are switching to XDCAM EX, so of course the route to enable this client-edit-logging ( http://www.creationvideo.co.uk/info/timecode/ ) that we've always offered clients is no longer valid as the material is already online....
Any suggestions still welcome!

Captured clips are playing back at least TWICE as fast

Hey all- I am capturing HD footage from a JVC Pro HD camera - footage shot at 24P. Everything seems fine with the capture (except for the fact that there is no device control - only capture now), but when I play back the captured clips I hear the audio playing at normal speed but the video is playing back at leat at twice the speed - all actors are in FAST motion. I hear the crew and director speaking, getting ready to shoot as I watch the scene start and speed through and end right as the clip ends.
Any ideas? Is it a setting on the OUTPUT for the camera?
Thanks for any help.
Cayce

Neither Final Cut Express nor Final Cut Pro support
720p24 material. You need a product like HDVxDV to
bring it in.
Tom-
Thanks for getting back to me last night. You seem to be a master in these parts. I am new here. I am really a director and writer but through my production company I have done a number of things in FCP over the years, always without any problems. That is until the introduction of HD and 24p at which time I sort of started saying to our amazing editor "whatver you say" and clouding over with confusion. After I got your message I went and got FCP 5 from the Apple store in an attempt to keep my friend, whose short we were trying to edit, from crying. Once installed and running we had the same issue as we had in FCE HD - the video - in terms of quality - was captured perfectly, but the clips would play back at almost twice the speed that they should have. I tried virtually every easy set-up that pertained to HD and nothing worked. On a few of them I could get an actual Log and Capture window to come up but when I went to play the material via device control there was no image, althoug I could see TC running. A friend suggested that you have to take the captured HD 24p clip and bring it into the timeline and render it for it to work. Is that true? I tried it to no avail. So, he shot on JVC GY-HD 100 at 24p. I now have FCP 5 HD and am considering buying LUMIERE software that purports to streamline this very issue. Any thoughts or suggestions you may have for me would be greatly appreciated.
Thanks so much,
M Cayce Lindner

Captured Clips Not in Browser

Am having a problem capturing video. The clips exist in the Capture Scratch folder but they have never made it to the project browser window.
Running 10.4.9 in an iBook G4. Using FCE HD 3.5. Scratch Disk set to an external hd (Maxtor 120) and Easy Setup to DV-NTSC 32 kHz Firewire Basic because my video camera is a Canon ZR 45. Using DV tape---no HD. What else? Initially had a problem with camera recognition, but did the QT thing which solved that.
Capturing is a problem, yet when I played the QT clips in the Capture Scratch folder they seem OK.
Anyone have an idea about what is (isn’t) going on? Maybe these clips were never captured at all. So why are they in the folder?

G'Day Lee.
If they are on the Scratch Disc and play correctly then the capture side of things is OK.
The only thing I can think of is that you may have had more than one Sequence open at the time and the captured clips in question have been associted with the Browser Folder that was the active capture bin.
Always look for a little clapper board icon at the top left of the Browser. It's into this Folder/Bin all captures appear. If so:
Open your Seqeunce, use File>Import Files, then navigate to your Scratch Disc where the files are you wish to have in Browser, select them and hopefully it's all good.
Al

Issues with capturing clips.

when i capture clips witht he hidef 1080i60 apple codec it cuts each clip at the scene. instead of one 62 minute clip. how can i change this.

That's the way FCE captures & treats HDV material. It's a change from the way FCE works with DV material.
One can only guess why Apple made that change w/r/t HDV video but I suspect that they not only got a lot of feedback from users who wanted it that way but also considered how very large a 62-minute 1080i60 HDV file could be (49GB ... Bueller .... Bueller .... anyone ... anyone?) and decided that it would be better disk (and risk) management to create smaller files representing individual shots.

Should I export captured clips as Quicktime movies?

Do I need to export my captured clips as Quicktime movies if I want to import them as source clips in other projects?
I had been importing directly from the capture scratch folder, but this resulted in mono audio tracks, rather than stereo. Everything else looked fine...
This problem has been driving me nuts...perhaps this is the explanation.

I figured it out elsewhere.

Timecodes Missing on Captured Clips?

After capturing DV clips, FCE refuses to show the timecode information. The FCE Browser window won't show the Media Start or End timecodes. Cntrl-click on the browser headings refuses to allow switching to logging vs standard view. The camcorder (Sony TRV9) is in the Apple approved list, and controls fine from the FCE capture window: even allowing specifying timecode start and end for the clip: then doing the clip capture at the correct times. captured video and audio are fine. But Edit-Item Properties on a captured clip in the Browser shows only format information: no tab for timecode data. Yet when I installed the i5m video filter to overlay timecode data on top of a video clip: it shows up correctly in the Viewer window: the timecode data is clearly in the clip file, but FCE refuses access to it! Tried trashing prefs, reinstalling FCE, using a different user account, rebooting and restarting camera, changing from NTSC firewire to firewire basic etc. OS 10.4.3 and FCE 3.0.1 are latest version of everything as of 12/19/05. Anyone else run into this?
G5 2.5 Quad Mac OS X (10.4.3) 1GB RAM, 250/400GB SATA Drives

Tom: thanks: my confusion came from the Final Cut Express Help pdf file, but evidently its in error, and must be confusing FCP with FCE. I had even called Apple User Support and they thought the timecodes should show, but indicated that sometimes the FCE documenation confuses features that are only in FCP.
thanks for the quick response!

Problems capturing clips

I using the latest version of FCP with a Blackmagic card. Everything has been working fine until today. I'm having problems capturing clips. I'll start Log & Capture, grab a clip, the window displays it is capturing it, and then when I look at the logging bin, my clip is not there. But if I look in the capture scratch folder, the clip is there.
Now, if I try to import that or any other clip, FCP gives me an error message. Does anyone know what could be wrong? I would appreciate your help.

Probably a Black Magic issue so be prepared to talk to them.
To debug this, you have to take the Black Magic stuff out of the equation to determine if FCP is at fault. If you have any DV device, try to capture from it.
bogiesan

Capture Clip Limit 9:25:15

I just installed Final Cut, bought my computer with specificiations chosen for the program, and while trying to capture clips it stops at exactly 9:25:15 saying "There is a lack of disk space." I have a 500 gb hard drive and 500 gb external, and 2gb of RAM that I know the computer isn't utilizing fully. As far as I can tell I can't find limiters to recording time. The consistency of clip time before "disk space" error is strange as well. Any help would be amazing!

http://discussions.apple.com/thread.jspa?messageID=3957186&#3957186
This sounds an awful lot like your problem to me. The forum search tool is your friend...

Capture Clip Mono vs. Capture Now Stereo

I am baffled by the difference between the audio that results from Capture Clip vs. Capture Now. When I capture a clip using Capture Clip (setting the In and Out points), the resulting clip shows the audio as mono with two individual mono tracks. When I capture with Capture Now, the resulting clip shows the audio as Stereo, with the left and right stereo tracks. I cannot understand why this happens. I have tested this using the exact same footage from the camera. Any ideas? I've looked for a setting that can change this. I would prefer that the audio is captured as stereo, since I don't want to have to manually link all my audio tracks in the timeline.

This is way odd: I did a interview using both external mic and a wireless mic. Both tracks are being displayed in the camera (Sony PD 180), but there is no way I can pick up the wireless track in my FCE- of course, is the track I need . Only track that comes up in FCE is the monotrack of the external mic - which is useless

Scene Detect 8 + 15 extra frames on every captured clip

When capturing HDV in CS5, using Scene Detect creates extra frames.
Imagine clip #1 when it captures its footage, instead of stopping at the end of the clip, it continues for another 15 frames into Clip #2 and tacks this on to the end of Clip #1.
It then starts to capture Clip #2 but first it rolls back (this is done by Scene Detect electronically. The tape does not actually roll back) into Clip #1 and starts the capture 8 frames back into Clip #1 before it continues capturing the footage and proceeds to repeat the 15 extra frames capture from Clip #3. Everything is repeated throught Clip #3, Clip #4, etc. until the end of the tape.
These things did not happen in CS3. This is a CS5 problem.
Essentially each clip starts with 8 frames of the previous clip and ends with 15 frames of the next clip. The extra frames contain both video and audio in perfect sync.
When capturing, I am making no adjustments on the frames control which is what the Adobe Service suspected. I ran a capture with them on line demonstrating the problem.
Although I can still edit with this footage, using scene detect, with 280 clips per hour tape, it is not pleasant removing 8 frames from the front and 15 frames from the back of each of the 280 clips.
Is there a solution to this problem or perhaps a quick-automatic way of removing the frames from each of the 280 clips?
I currently edit on an MSI GT660R laptop
•     Intel® Core™ i7-740QM Processor
•     Genuine Windows® 7 Home Premium 64bit
•     15.6" TFT-LCD Display (LED Backlight)
•     NVIDIA® GeForce® GTX 285M 3D Discrete Graphics Card (DDR3 1GB VRAM)
•     6GB (2GB x 3) DDR3 1066 MHz System Memory
•     1TB (500x2) 7200RPM Hard Drive
•     802.11 b/g/ n Wireless LAN with Bluetooth
•     Dynaudio Premium Sound Speakers
•     Dual SATA Hard Drive with Raid 0
•     Accelerated CPU+ GPU performance with MSI TDE Technology
•     MSI Cooler Boost Technology
•     USB 3.0 for high speed data transfer
•     Blu-Ray Optical Drive
•     Built-in 720p HD webcam
•     HDMI (High-Definition Multimedia Interface) output
I want my CS3 back.

Is this what you wanted?
Wayne
Tried to do a direct reply but the email just bounced.

Capture Clips and Mac Book Drive

My first question is... I need to free up gig space on the Mac so that I can run Pro Tools (not simultaneously with Final Cut Express HD of course). When making movies on Final Cut Express HD, I notice that each time I capture a clip it is not only being saved in my external Seagate drive (as I instruct it) but apparently it is also being backed up in the Mac and there is over 100 gigs of 160 that is hidden somewhere that apparently is just extra space being used. How can I delete that and make sure that the all of the capture clips are on the external hard drive? Thank you. I am sure it is a simple answer. (I am not exactly sure of the operating system I don't have access to all of the paperwork at the moment- I bought the Mac and Final Cut in February 2007).
Dan

FCP doesn't ever put clips twice on the computer don't think... something else is causing your buildup of files.
You can see where each clip is stored in FCP though... right click on any column header in the Browser and select "Show Source" as a new column to be added. It will show you where the media is on your system that the clip is referencing... bet it's only on that external...
Jerry

Capturing clips

Similar Messages

Maybe you are looking for