Capturing Data Source Activation in a transport

Dear Gurus,
I 'm using the 0TR_LP_1 data source for my data loading and facing the following issue.
In DEV system , this data source have been activated by one of the developer but not captured in any of the transport request.
How can i capture the activation in another transport so that this data source can be activated in QAS and PRD system via transport.
Thank you
BR

Hi ,
You can fix this issue by following the below steps.
1--> Go to T code RSA6
2-> Find your data source --> Click on Object Directory Entry
4--> Change the package --> It will ask you for a transport
5--> Save it >Double click on your data source> Generate data socrce
6--> Then transport your data source
On the BW side 
1--> Replicate data source
2--> If required reactivate transfer and communication structure using standrad programs.
This will solve your issue.
-Vikram Srivastava

Similar Messages

  • Data source - activation problem

    Hello,
    when I try to transport a datasource from the development system to the QA-system I always get the error:
    Syntax error in GP_ERR_RSAPTD1, row 25 (-> long text)
    Message no. RG102
    Diagnosis
    Field '/BIC/CE8CO_PA_02A' is unknown. It is neither in one of the specif
    What could be the problem?
    thanks

    Hi,
    export data sources of InfoCubes are transported with the associated InfoCube, you should not try to transport the export data source separately. Just pick up the cube and transport it, that should sove the problem and the exprot data source should be there, maybe you need to replicate data sources to see it.
    Regards
    Michele

  • Data source active/inactive button grayed out in LBWE

    Hello,
    When I was activating the Logistics datasource in LBWE, my data source status became red and the Active/Inactive button grayed out? how can I make this data source active again?
    Thanks,
    KK

    Hi Kumar,
    The status will become Red and Active/Inactive is disable due to Extract structure activated but data source is not maintained. This happens once you change the extract structure to Include additional fields. Please do the below step:
    in LBWE, Click on Data source (Technical name of your data source beside maintainance) and you will get maintainance screen, change if you want some thing or else leave as it is and save, Now  the status for data source in LBWE will become yellow and activate/deactivate will enable.
    Regards,
    Kams

  • BW 7.0 data source activation - transport?

    Hi Folks,
    I am a bit confused with BW 7.0 data source. I replicated from my APO system and the data source is created in BW as 7.0 -> I choose background activation.
    When I want to create an infopackage for the infosource I tells me that data source is not yet active.
    So I went in and activated -> asked for a transport.
    Question: do I have to transport the data source / after it is replicated on the next system (TEST)?
    Or should the data source be normally active right after the replication?
    Best regards,
    Axel

    yes. we have to transport the data source replica in BW after it is replicated on the next system (TEST).

  • Data source activation

    HI Experts,
    we are enhancing the data source 0CRM_SRV_PROCESS_H.After replicating the data source in bw,we are mapping the info objects with fields in transfer rules.When we are activating the transfer rules in BW it is giving the error no psa data exist for the data source.
    and when we go to display data source the Active version is "does not exist".and it is not at all allowing to activate the transfer rules.
    I tried RS_TRANSTRU_ACTIVE_ALLl,but it is taking long time and it is not coming.
    I also go through the sap notes mentioned in the earlier posts,but does not work.
    We are using 3.5.Can any one help me how to rectify this error.
    Thanks in advance
    sridath
    Edited by: sridath on Aug 24, 2009 7:55 AM

    Hi All,
    we tried all the possible ways to activate the data source,but was fialed.
    Now we are deleting the data source and replicating again,as it is already there in production.after transporting the new replicated data source the psa data will be lost.
    in order to get the psa data how do i proceed further.
    please help me..
    sridath.

  • Warning in data source activation in R/3

    Hi experts,
    While activating the data source 0salesorg_attr it shows the
    following warning:
    ============================================
    Generating DataSource 0SALESORG_ATTR
    The extraction structure V_VKORG_BW of DS
    0SALESORG_ATTR is a view. This allows no CustApp.
    ============================================
    I want to replicate this datasource into bi.
    Anyone please provide me the solution.
    Full points will be assigned.
    Thanks & Regards,
    V N.

    hi,
    hope u might have tried to change the structure hence might said the warniing, from RSA5 select the DS then Activate/Transfer then in RSA6 do select the required filed and save.
    chk the data availabilty in RSA3 and then perform replication process in BI.
    Ramesh

  • Data source activated in RSA5 but error in RSA3

    Hi,
      I have activated data source 0CRM_OPPT_H in transaction RSA5 in our CRM system and can view this in RSA6. However when I run the extractor checker RSA3, the system generates error ( "Errors occurred during the extraction    Message no. RJ012").
      Upon debugging I found that this is caused by not having entry in table SMOXHEAD_S for this data source.
    Also when I go to transaction BWA1 I am not able to display this data source. Other master data sources that I activated earlier are working fine. Its the transaction data source 0CRM_OPPT_H or 0CRM_OPPT_I that are having issue.
      Please let me know any other steps that I may not be doing after activating the Business content data source in CRM system using transaction RSA5.
      Thanks
    Arunava

    Bhanu,
      Thanks again for your super fast reply. This really solved my issue.
      However for may days I have been trying to understand this BWA transaction ( BWA1 and BWA5) and figured out some fact( Like BWA5 puts the same entry of smxhead table to snmxhead_s table to make the whole thing work, Also we can extend the mapping in the BWA1 to include additional custom object with out the badi coding( is it possible?) .
      But this area still is a mystery and I would like to have a comprehensive article on this adapter layer and BDOC relationship. Is this possible for you to help here.
    I would really really appreciate.
    Thanks
    Arunava

  • 0CUSTOMER_ATTR  Data source Activation Problem

    Hi,
    I am trying to Activate 0CUSTOMER_ATTR  Data source at BW side. Its giving warnings
         'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
    while Activating
         "Error when creating transfer structure /BIC/CCBB0CUSTOMER_ATTR in source system "
         "Error when activating DataSource 0CUSTOMER_ATTR  "       
    Regards,
    varun

    Hi,
    try to replicate the datasource and then run program RS_TRANSTRU_ACTIVATE_ALL for this infosource in SE38.
    If this does not help take a look at this forum threads:
    Transfer Structure Error
    Error while activating Transfer structure
    Error when activation transfer structure..........,
    Error activating Infosource
    The warning 'Field UMSAT ( Position 76 ): Packed numbers should have an odd number of digits'
    should be no problem because it is a content object.
    Regards
    Andreas

  • Data Source Activation in BI 7.0

    Hi all,
    I have seen lot of discussion on this subject in this forum but still having a problem. We are on BI 7.0 and Source System is ECC 6.0
    I have activated datasource in Source system and replicated it in BW. My datasources are by default going into 3.x Datasources (R3TR ISFS). I read that it will pop for new datasource or 3.x datasource, it did not happen to me. I do not see any such thing in context menu of source system either.
    SAP help documents state that "If SHDS is available for the D-TLOGO object in the BI shadow content, the relevant metadata is replicated in the DataSource (R3TR RSDS". Where can I find this shandow content in BI,
    Can any one please help to resolve this.
    Thanks in Advance
    SN Dubey

    Hi  Chaitnaya,
    This way is also not working. I am mentioning the steps here.
    1. Activate data source in Source System. It is working fine in RSA3 as well.
    2. Replicate datasource in BI. It is getting replicated successfully. No popup for confirming type of datasources.
    3. It is automatically creating 3.x datasource.
    Is there setting that I am missing either is source system or BI?
    Regards
    SN Dubey

  • Data source and attribute list transport

    Hello gurus!
    How can we transport data source and attribute list to another system?
    In IMG system writes "Transport is not required".
    Best regards,
    Artur Litvinov.

    Hi Artur
    Attribute sets can be transfered thorugh RFC connection. Create the RFC of the source system in target system, then import the Attribute sets using the option "Transfer of Attribute Sets from Other System " tcode CRMD_MKT_TOOLS - Expert Tools.
    Hope this will help 
    Rgds
    Mallikarjun

  • Data Source Activation - Master data u201CSource Not Activeu201D (Func. Mod. based)

    Generated an export data source, message appears that it is u201CSuccessfully generatedu201D. I then selected the logical Source system and u201CReplicated all data sourcesu201D
    I checked in RSA2 (data source repository in BI) and it exits.
    Now that I am trying to use the generated datasource to load another MasterData Char Attributes, I get the error message u201DSource Not activeu201C, I am trying to create a transformation from 1st  infoObjectu2019s export datasource to this object (both are of the same type etc)..                                                   
    I am aware that we can use the program RSDS_DATASOURCE_ACTIVATE_ALL  but this only works if we can see the datasource is RSDS  (which I can not for this Datasource, perhaps the reason being that it is Function Module based? )
    How else I could activate it? What other steps I should take or anything that can help me?   Please give your suggestions and I will say THANKS the SDN way.

    I had the same problem today with an export DataSource generated on a planning area in our production SCM system.
    I debugged running RSDS_DATASOURCE_ACTIVATE_ALL in our QA system for the same DataSource amd saw that the program calls function module RSDS_DATASOURCE_COLLECTION_ACT to do the activation. I ran the function module in production using the same parameters.
    Our DataSource is 9A_PRG_PA for source system SCP100. I used SE37 to run function module RSDS_DATASOURCE_COLLECTION_ACT with these parameters:
    I_T_OBJNM     9A_PRG_PA                     SCP100
    I_WITH_CTO     
    I_CONTEXT     'ACTIVATE_ALL'
    I_FORCE                     X
    This made an active version of the DataSource appear, and I was then able to run RSDS_DATASOURCE_ACTIVATE_ALL to activate it properly.
    Cheers,
    Paul

  • Errors RSAR 374 RSAR 375 Data Source activation

    I'm trying to load a hierarchy for the InfoObject 0MATERIAL of ERP into SCM. RFC is already configured and working correctly. From Business Content objects I have copied 0MATERIAL, 0PRODH1 (to 6) and 0PROD_HIER. I then created a Source System is connected to the ERP via RFC and then execute the activation and Replication. Replication was successful, but the activation was not completed and received an error: RSAR RSAR 374 and 375.
    RFC work correctly, users are also created to correct. These errors do not give the process the Transfer Rules, which displays an error when trying to change RSAR260 Transfer Rules.
    Help to find the solution to activate, or tell my other options for loading hierarchies for 0MATERIAL of ERP in SCM

    Hi Alexander,
    You might have checked this already , if not:
    Check authorization ? when asked to remote logon with administrator user, do you use administrator user ? you may need user with administrator priviledge to create source system. sometimes error message in source system creation didn't indicate authorization issue where actually it's lack of authorization. Test the rfc destination again ? and test authorization is ok ? sm59 - choose rfc destination - menu test >> test & authorization.     BWREMOTE AND ALEREMOTE back ground users
    Please also check SDN thread:
    Urgent ......Problem........Error RSAR 374, RSAR 375
    Regards
    Datta

  • Data Source activation error

    Hi
    I have activated 2LIS_13_VDKON, i need to enhance the structure with some fields. WHen i append the structure with ZKAWRT of component type KAWRT (currency field) its not appending and giving me error is check table needed to be given. Infact KAWRT field doesnot have check table. I am doing this in ECC 6.0
    can someone help me with what to do?

    Hi,
    in your enhance structure you have to maintain the TAB currcy/quant fields with the reference table and ref. field (currency) to which your KAWRT refers to.
    For instance if it is the same currency than your condition value, you should maintain MC13VD1KON as ref table and WAERK as ref. field.
    hope this helps...
    Olivier.

  • Difference between Replication and Activation of Data Sources

    Hi,
    I would like to know what exactly happens when data sources are replicated and when data souces are activated
    Regards,
    Visali.G.

    Once you make the replicate of DS at BW, what ever the struc. for that DS would be regenarated, and accordingly your extraction and setup table struc. would get updated by the latest changes made in the DS.
    At the BW side all corresponding communication and transfer structure and PSA structure would also get generated according to the DS struct. per R/3
    Need of Replication in other terms we can say
    Replication needs to be done is each time you save you datasource in R/3. This causes the timestamp of the datasource to be changed and hence the timestamp of the datasource in R/3 and BW are not in sync. Replication would make the timestamp in sync in both R/3 and BW.
    Hence you would notice the error "Timestamp error" when you do not replicate the datasource after changing it.
    Activating the data source, activating the structure and make available the dat source to use.

  • Data source Replica

    Hi Gurus,
    How to collect Data source Replica in a trasport request
    iand what is 'Data source Replica'
    how i can see the 'Data source Replica' under a transport request
    Please ...........
    Thank you

    Hi,
    When you activate the data source on the r/3 side, you end up capturing it in a transport request.
    However on the BW side you go on and replicate the activated data source. On most times you are not prompted to enter the transport request when you replicate the data source. However if prompted, capture the data source where you capture the transfer rules. You will  not find anything like data source replica under that request, but you will find data source and your data source will be under it.
    hope this helps.
    thanks,
    rahul

Maybe you are looking for