Capturing excise invoice after MIGO

Hi All,
How can we capture and post excise invoice when GR already done for the PO., (material missed in J1ID and no condition records maintained while raising the PO), I have done the following, but I am unable to post part2:
1) Maintained the material in J1ID
2) Maintained the excise condition records
3) Captured the Excise invoice(J1IEX) with reference to GR document
4) Tried to post the Excise invoice thru J1IEX, but getting message"No Part I exists for availing credit in excise invoice"
Your prompt response is highly appreciated
Regards,
Sattuj

Hi
You have captured excise invoice w.r.t GR document. But at time of MIGO, you should select "part 1 entry only" in excise tab and thus create a GR document. At this time, part 1 entry would be made. Then you can capture and post excise invoice with ref to GR document.
Please note that without part 1 entry, part2 (posting of excise invoice) is not allowed legally and SAPically.

Similar Messages

Settings for capture excise invoice in MIGO and other settings

Hi,
For excise invoice capture and post procedure which we are following is as follow
1 : For Local Excise invoice
     After receving goods from Vendor first we are Doing J1IEX Part 1, Capture excise invoice after saving this we are getting part 1 number, then we are making GR with MB01 ref. to part 1 number , then qyuality inspection then updating material in Unrestricted stock from quality afetr that we are doing J1IEX poat PART 2 here we are getting part 2 number then invoice verification,
2 : For import PO
      First MIRO for custom delivery cost we are getting MIRO number, then J1IEX part 1 ref. to MIRO number and year then MB01, ref. to part 1 of J1IEX then quality quality to store then J1IEX Part 2 then MIRO for vendor.
now in many thread i read about capture invoice in MIGO   so i want to know the detail settings which required to be made so that we can perform our ruoutin in short time.
regards,
zafar

hi
>is there will be any effect in our existing procedure We want to follow both for some time , after that we will do only in MIGO,
yes u can use both simultniously
but in MIGO if u capture, the step of updation J1i5 will be ommited (it will take palce automatically)
like currently ur doing capture >update >post
in migo only capture and then post
>second think is that now while posting the capture excise invoice in J1IEX we rae entering part 1 number, so can we do woth >this while capturing it thorugh migo or we have to post with vendor excise invoice number only.
You can do capture and post simultaniously in migo only
the separate transaction is given as persons or users may be diffrent for GR and excise
if the same user want to do the GR and cap and posting then yes he can
for capture and posting u also have to tick Post Excise Invoice Captured in MIGO in excise grp settings
regards
kunal

Capture excise invoice at MIGO

Hi,
I want to capture excise invoice at MIGO.
In migo i am selecting only refer excise invoice & entering excise invoice No & date.
But i am getting error message as Excise Invoice #### of Vendor #### does not exist for Reference.
Supriya.

Hi,
In the drop down list i am getting only 'only refer excise invoice', 'part1 only', 'no excise entry'.
i am not getting 'capture excise invoice'.
Supriya.

Capture Excise invoice in MIGO

Hi
i want to know where in the MIGO tab, i can put the option capture excise invoice, capture and post excise invoivce and no excise etc. pls tell me
regards
B Shar

if ur material is maintained in J1ID, then while doing migo an excise invoice tab will appear at header.
there u have to enter the excise invoice number and excise invoice date.
then check and save the migo.
now use J1IEX.here in the first tab u will found the options like display,cancel,capture,post option.
in the next tab u will choose vendor excise and in the next tab u have to enter the excise invoice number u have previously entered in migo.
rgards,
indranil

How to remove the Option "Only Refer Excise Invoice "from MIGO

Hello,
We are using the ECC 6.0. while suppose material is excisable then there are Four options will come in MIGO --Excise Invoice tab
1)Only Cature Excise Invoice
2)Only Refer excise Invoice
3)Only Part1
4)No excise Entry
As per my client requirement then only need two options in MIGO.
1)Only Part1
2)No excise Entry
Bcz they want to Capture and Post excise Invoice in J1IEX only...
I have tried from Tax on goods movementIndia-Basic settings--Excise Grp settings..... Here in MIGO settings we can remove the Click from "EI Capture"....Then we will not find the Capture excise Invoice in MIGO. Next How to remove the "Only refer Excise Invoice from MIGO..
Regards
sapman

Hi,
You can capture Excise Invoice w.r.t. PO in J1IEX and then refer it during MIGO (Note: - You are not capturing Excise Invoice again, only referring it) and then Post it in J1IEX.
And in case of Stock Transport Orders, you need to refer the Excise Invoice No at the time of GR in receiving plant which is posted in the Supplying Plant (via J1IIN) so that system will copy all the duties same as of that invoice and user need not to do any manual intervention.
Also in case of Imports, first you capture Bill of Entry w.r.t. PO in J1IEX and then refer it during MIGO and finally post it in J1IEX.

Error during capturing of Excise Invoice during Migo

Dear All,
When I trying to capture the Excise Invoice during Migo , the movement I enter the vendor's Excise Invoice ,system gives me the error , *****excise no dated **** does not exist for this *** vendor for reference.
Please help , where I am lacking.
Quick Reply would be appreatiated and rewardable.
Thanks
Edited by: Chhabra Nitin on Jul 4, 2009 9:07 PM

Hello Nitin,
In your MIGO - Header Excise details tab, make sure that you have selected capture excise invoice. Now it is 'Refer excise invoice' and hence this message comes.
'Refer excise invoice 'is used when you have already captured an excise invoice and doing a goods inward referring the same invoice captured before. (Multiple GR against single EI)
Also to capture the excise invoice in MIGO, make sure that the 'capture EI at MIGO' is ticked for the excise group in SPRO - LO Gen - Tax on goods movement - India - basic Settings - define Excise groups.
Regards

Capture of excise invoice in MIGO for depot

Hi,
We have one depot plant as per regular process we do the GR with MB01 and then J1IG for capturing of excise duty which update the RG23D entry, now i want to know what is the difference if we do this in MIGO so that both this can be done in same transaction I try in development server by first selecting the check box for capture excise invocie in MIGO for the depot plant then made one entry in MIGO but found that the field SHIPFROM in table J_1IRG23D is coming blank when done with MIGO so is there any differecne in thos two J1IG and MIGO create RG23D entry aslo the vendor from which we are purchasing the material is also a trader who is passing the excise duties which they paid and the same amount we have to split in MIGO but I have not found the MRP indicator in excise ->misc. tab in MIGO.
regads,
zafar

Hi,
Can you help on this, I am not getting the MRP indicator in MIGO for the material, what settings are required for this the J1ID the vendor is selected as first stage dealer.
regards,
zafar

Cancellation of Excise invoice after MIRO

Hi Everybody,
How do i cancel the Excise Invoice after MIRO.my scenario is Net Inclusive of Excise duty. the procedures which i followed as follows,
1.PO with Zero Tax code > J1iex(captured the Excise Invoice)>GR which refers EI>Posted EI.
After posting EI i found thats wrongly captured then i did canceled the EI as follows
2. GR Cancellation>Posted EI against canceled GR>Canceled the EI.
Now my RG23A got cleared.then i did again step 1 as well as MIRO.After did miro again i found that captured EI is Wrong. I have to followed below procedure to Cancel the EI,
3.Cancell the MIRO document in MR8M>GR Cancellation>Posted EI against canceled GR>Canceled the EI.
When i tried to POST EI one pop up message is coming i.e status of EI one is for INPROCESS another one one is for Posted .I chose Inprocess and entered i was getting following Error
No Part I exists for availing credit in excise invoice 364 2008
Message no. 4F112
If i Chose POSTED i was getting following error,
Excise invoice 364 2008 has already been posted for vendor 103769
Message no. 4F107.
Can anybody tell me where i'm wrong what procedure i need to follow
Regards
Govindaraj

hi
plz check the document year for inprocess and posted doc
now steps for excise invoice cancellation will be as follows
1 cancel MIRO document with MR8M
2 cancel MIGO document in MIGO
3 goto J1IEX choose post here give the excise invoice no of the document (u will get this no from table J_1IEXCDTL and field DOCNO)
4 now in misclinious tab give the rejection code and simulate u will find all the duties are reversed (compare with previous posting)
5 now ur invoice is cancelled and u can go for new GR and new postings
regards
kunal

Excise Invoice in Import Scenario. Is it required to capture Excise Invoice

In Import Scenario, Do i need to capture excise invoice when doing MIGO after MIRO for Custom Vendor? In my openion, There should not be any excise invoice caputured in system as we are paying custom duties , excise is not applicable. Kindly clear my doubt. If excise should be captured than on what amount excise will be calculated?

Hi ,
The import process involves....
Clearing Customs duty MIRO-GR for import goods MIGO against the Invoice reciept-Capture the Import duties through J1IEX_Capture against the MIGO document-Final payment to main vendor through MIRO.....
Your eligible to take credit on CVD, Cess on CVD ,Secondary Cess on CVD and AED.
Regards,
Patil

J1IEX - Capture Excise Invoice without Purchase order.

Dear Gurus,
when I am trying to capture Excise invoice through T-code J1IEX without PO (EWPO), I need to enter the material document (MIGO) No. but when I enter this is the error what I am facing.
Error: The Document XXXXXXXXXX does not contain any selected items.
What are the steps to be followed. (I have specified all the excise accounts perexcise transactions and also I have specified G/L accounts per excise transaction)
Please guide me through this.
Thanks & Regards!!

Dear Gurus,
Thanks for the replies.
but the problem isnt solved yet
1. I am not using movement type 501 for GRN and I am using 101 movement type.
2. Even after updating the Part - I Register after using J1I5, when I enter the material document its not accepting.
Please any more suggestions?
How di I go ahed throuh this?
Thanks & Regards

J1IEX capture excise invoice error. part 2

was created to continue from this [thread|J1IEX capture excise invoice error.; which was locked for no apparent reason.
Mr Jeyakanthan A, don't you lock my thread and telling me to search the forum for answer.
i have done my search on this [ topic on J1IEX no selectable item|http://www.sdn.sap.com/irj/scn/advancedsearch?query=j1iexdoesnotcontainany+selectable], it had yielded a few threads but none of it offer a resolution.
go thru the threads yourself if you want.
once again don't you lock my this thread.

Hi,
The message 'document/PO doesnt contain any selectable items' would come when there are any open PO's for the same vendor for the same material. Check whether there are any open PO's in ME2L or ME2N. Close the unwanted PO's by ticking the Delivery completed in the Delivery tab and save. Try J1IEX after this.
The option of Internal excise invoice number will come in the excise item tab under part 1 tab if the excise values are Captured/Capture & posted while processing MIGO. If the excise values are not captured, please try reversing the MIGO and process a fresh MIGO and check excise values are being captured or not.
Regards
Hari
Hi Hari,
i have created a new vendor and maintained all the entries in J1ID for it. yet i still encountered this message.(in response for any open PO for same vendor for same material cases.)
next, i have also entered the necessary data in the PO's Import tab(on both header and item level), but when i tried doing MIGO-GR, there's no excise tab as well. i guess this might also be part of the reason why i am hitting that message when doing J1IEX.
strange..i had tried all means but still cant get it work.

Capturing Excise Invoice (EI) at depot

Hi gurus
I am facing an issue while capturing Excise Invoice (EI) at depot.
If non-batch material and batch material are combined into one material document which is generated after post goods issue (PGI) to create EI, two separate Excise Invoices are getting generated automatically.
But while capturing Excise Invoice for both materials at depot, I am NOT able to capture in T-code J1IG by Goods receipt material documents.
How to handle such case? Could you give us some suggestion?
With Regards
baalakrushnan.da

Hi Ashok,
After MB1C, when we are trying to execute J1IG with the material document number and then click "Details" button, the new screen asks for internal document number. We click on "More Documents" and manually enter the excise values along with excise invoice details and save.
This reflects the values in the RG23D and displays in J1IDEPOTSTOCK1 report also.
But when we try to sell from the Depot and create J1IJ, the uploaded invoice is not getting displayed when we are trying to select it to pass excise value.
How can this invoice be selected in J1IJ, if we follow this route.
Is this the correct process or I am making some mistake in the J1IG step.
Regards,
Debarshi

GR item reversal created problem to capture excise invoice

Dear All,
GR posted for 2 item with 2 different PO#. Due to price changes second item reversed for the GR and the first item remain in the same GR. While capturing excise invoice by J1IEX for the GR the system shows Document xxxxxxxxx does not contain any selectable items. IR has done for the GR and Payment also made for the same. So we can not reverse the GR. Kindly let me know the possibilities to capture excise invoice for the first item mentioned above.
Thanks...

Dear Arun R,
You Kindly go to the following path and maintain your movement type over their and do the MIGO.I am very sure at the time ot migo excise tab will come for part-1 updation and subsequently you capture part-2 on J1IEX.
SPRO->LG->Tax on Goods Movemet->India->Business Transactions->Incoming Excise Invoice->Specify which movement type involve excise Invoices.
Hope this will help you out.
Regards
AKS

Error during Capture Excise invoice.

Hi All,
I am getting the below error message while capturing the Excise Invoice w.r.t. Material Document for which Part-1 entries are done in MIGO.
" Document 5000012864 does not contain any selectable items
Message no. M7064".
Pl. suggest.
Regards,
Varma

Hi All,
I am getting the below error message while capturing the Excise Invoice w.r.t. Material Document for which Part-1 entries are done in MIGO.
" Document 5000012864 does not contain any selectable items
Message no. M7064".
Pl. suggest.
Regards,
Varma
As you have done Part-1 entries are done in MIGO.By capturing excise invoice we only post part-1 entries .Therefore u can not capture the excise invoice/Part 1 entries multiple times for the same materila document.
As u have already captures the excise invoice u can only change/post/cancel the excise invoice.
Regards,
Satpal

J1IEX capture excise invoice error.

what i had done was;
1st - create an import PO and my pricing procedure used was SAP CIN standard JIMPOR.
2nd - PO created under 12345, i proceed to MIRO to post the invoice under 11111. *note that GR was not being done at this point.
3rd - next i proceed to J1IEX to capture excise invoice, i entered the PO number and a small popup screen appeared asking for commercial inv no, i key in the invoice no 11111 and year 2011.
and i encountered the error message Document 12345 does not contain any selectable items.
why is that so?
what i understand that JIMPOR is CIN pricing procedure and it contain JCD1 condition type which is a valid condition type for it to be captured in J1IEX. pls help!.
thank you.
Note : Please search forum before posting,there are lot of resources(search forums,sap help documentation,articles,wiki etc.,) available.If you have any specific queries please post it here.
Follow forum rules before posting.
Edited by: Jeyakanthan A on Jul 21, 2011 12:00 PM

hii,
still i feel that this issue is related to number ranges. have u checked to give there ur Invoice Number.
u can try sm more thing ...........
like:-
For Import Purchase Order first you should settle the delivery costs in MIRO.
also check sm threads which can give some ideas:
Excise capture during MIGO for domestic purchase
Not able to capture excise invoice for import PO
imports
hope it will be helpful.
thanks
nisha

Capturing excise invoice after MIGO

Similar Messages

Maybe you are looking for