Capturing from my DVCAM player to FC 4.5 HD drops or freeze the image!!!!

Hi... I have used Final Cut since I remember and first time in my life I can't batch capture as i used to... Normally I use my DVDCAM via firewire directly to my external HD... and no so often directly to my computer's hard drive... Since last week my Capture scratch starts to behave weird and do this freeze-drop frames during the capture on both HDs...
So any ideas!!!! It's that possible that my computer HD has gave all of it?????

You can try this:
http://discussions.apple.com/thread.jspa?threadID=929465&tstart=30
  Alberto

Similar Messages

  • When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and  sit next to the original? Mine is going to the end of the folder. Thanks Karen

    When editing an image in Photoshop from Lightroom then saving it back to Lightroom, how do i get the image to go back and sit next to the original image? Mine is going back to the end of the folder. Thanks Karen

    Hi Karen
    You may the sort set to Custom. Click the dropdown menu on the toolbar (to the right of the word sort) and change to capture time.
    If you can’t see the toolbar above the filmstrip press the T key. Press T again to hide.

  • WDS: Can an image captured from a HDD be deployed to a SSD (and still have all the benefits of an SSD...)?

    WDS Server is Windows Server 2012.  All captured images are Windows 7 x64 Enterprise.  I'm capturing images from a virtual machine (VMware Workstation) on a HDD and hoping to deploy to SSDs.  Will this cause any issues?  Will certain
    SSD advantages be disabled?  Are there any steps I need to take to make it work/optimize it?

    I would say it wouldn't change anything in terms of performance. If you do a capture and sysprep it would be just like you install from scratch from a DVD, since sysprep removes all hardware-related information. The advantage of SSD is usually only dependent
    on the controller and driver. As you say if you have SATA mode AHCI or RAID, this usually releases the controllers full capabilities as 6Gbps port, aswell all native querying etc.
    However, since you are running IRST, I want to mention that the IRST driver makes a BIG difference, e.g. if you are having Dell systems and running either RAID0 or RAID5, the performance increase can be up to +50% using the latest drivers from Intel instead
    of the built in ones. I haven't tested the difference for single disks though, but it shouldn't differ as much.

  • Capturing from an Internal DVD player

    Hi,
    I'm using a MacBook Pro & FCE 3.5. Is it possible to capture using my laptop's internal DVD player or can I only capture using an external DVD player hooked up with firewire?
    Thanks,
    Lisa

    You can't capture from any DVD player without converting the material. It's in completely the wrong format. You can use MPEG Streamclip to convert the material to QuickTime with the DV codec.

  • Import library and playlists from Windows Media Player without duplicates

    How do I import all the music and playlists from Windows Media Player into iTunes without creating duplicates?
    I add the folder containing all my music to iTunes and all my music arrives nicely. I begin importing playlists and the playlist comes over with all the songs duplicated in my library. Most of my songs are on playlists but some are not.
    After adding the music folder (approx 7000 songs) then all the playlists, my iTunes library now contains over 13,000 songs. The increase is due to the duplicates being created as the playlists are added.
    If I skip adding the music folder and just add the playlists I get most of my music without as many duplicates but I am missing the songs which are not on any playlist. Thanks.

    If it' sprotectged WMA files, no you can't add them.
    If they are plain WMA (like RIPped from a CD) you can File -> Add to library and iTunes will import and convert them.

  • FCE capture from iSight on iMac?

    Sorry for the newbie question..
    I just tried my new iMac and FCE, and I was wondering how to capture from the builtin iSight camera?
    I know this is 2 questions, but can I also capture from my home movie DVD's?
    Thanks
    Gray

    Neither. I believe the current version of iMovie will capture from the iSight.

  • How to store the data captured from oscillosco​pe into the MS Access database table

    Hi All,
    In my application, I tried to save the data captured from SCOPE, but could store only 200 bytes. I've taken the Memo data type for the field in database. I want to store all data ( 4 channels) in one field & retrieve back and display on the XY Graph.
    Thanks in advance.
    Regards,
    Shrini

    kramish wrote:
    Im pretty sure that Access does support JDBCNo it does not. It supports ODBC.
    just doing a quick Google came up with some pages:
    http://blog.taragana.com/index.php/archive/access-microsoft-access-database-from-java-using-jdbc-odbc-bridge-sample-code/
    http://www.javaworld.com/javaworld/javaqa/2000-09/03-qa-0922-access.html
    Both articles explains how to use the jdbc-odbc bridge. I think I've seen a pure jdbc driver for access but it wasn't from Microsoft and it wasn't free.
    Kaj

  • Capturing from VCR?

    I'm currently making a showreel of my work, however some of it is on VHS. Is there anyway I can link a VCR to my Mac Book Pro and capture from it on FCP? If not can my Mac link to the VCR and turn the programmes into Quick Times or similar?

    You'll need an I/O device and there are loads of them available but it may be that you already have one that is ideal for capture to edit purposes ... do you have a DV camera? If so then it probably has an AV in port to which you can send the output of your VCR, you can then pipe the DV output into your MBP via firewire and capture into FCP as DV.
    In the loads of them category there is Blackmagic's aptly named Video Recorder: http://www.blackmagic-design.com/products/videorecorder/
    its pretty cool but nowhere near as cool as Matrox's MXO2 Mini which is standout awesome:
    http://www.matrox.com/video/en/products/mxo2_mini/

  • How to freeze the columns in excel exported from SSRS report??

    We have created a report for our client. The client wants the report in excel format. As there are nearly about 30,000 rows in the excel. Client wants us to freeze the column header names in the excel so that even after scrolling down they
    will be able to see the column names.
    can anybody have idea how to achieve this in SSRS?

    Hi Shard,
    Thanks for your post, You can achive your requiremets by using the below logic. hope this will help you.
    Steps to achieve it
    1. Select the tabix and click on Tablix properties.
    2. In the General tab under Column Headers section you can see "Keep header visible while scrolling" checkbox, check it.
    3. Now the header row will be remain fixed in the report.
    OR
    1.    In the grouping pane, make sure to turn on advanced mode (click on the small black down arrow on the far right of the grouping pane) 
    2.  Select the corresponding (Static) item in the row group hierarchy
    3.  In the properties grid, set RepeatOnNewPage to true
    4. KeepwithGroup to After
    OR
    1)Freeze the header of all columns[ Freezing table header ] : To do select static member of table header row from  row groups [ Advanced Mode ] and set  FixedData to true
    2) Freeze the initial 2 columns : To do select static member of columns in column group and set fixedData to true .
    How do you freeze the tablix header row in an Excel export file in SSRS 2008
    Suhas Kudekar
    Mark as Answer if this resolves your problem or "Vote as Helpful" if you find it helpful.
    My Blog
    Follow @SuhasKudekar

  • I'm trying to upload pictures from iphoto to stores such as walmart or costco for prints. the images won't upload to these sites. i'm new to mac so i know i'm missing a step somewhere.

    i'm not able to upload pictures from iphoto to stores such as walmart or costco to order prints. the images just won't load. does anyone know what i'm doing wrong??

    Well, since there is no function to export from iPhoto to these sites directly, here is a simple way how you can try it:
    - create a folder on your desktop
    - name it like "WalMart pics"
    - open iPhoto
    - resize it so you can still see the folder you just created
    - select the pictures you want to send to the store in iPhoto and drag them onto the new folder
    The folder now contains the pics you selected. Now go to the stores' websites and upload the pictures from that folder.
    You might also use the "Share" option in iPhoto to get the photos into a folder, but I like the direct drag and drop better.

  • To load the image from appl. server to FORM

    Hi all,
    i have to fetch the image from Application server and Print in a form. i don't know how to load the image from appl. server to FORM.Through SE78 i guess we can load the image only from presentation server,,,,can anyone help on this????

    Hi Bhuvaneshwari ,
    Through <b>SE78</b> you can fetch the image from application server.
    Goto><b>Graphics</b>><b>BMAP(Bit map images)</b>>In <b>Name</b> parameter click <b>F4</b> for input help.>click on <b>execute</b> button.
    These images are stored on document server.
    There you can find images of application server.
    Those images you can import.
    Reward if helpful.
    Regards,
    Sandhya.

  • How to record audio out from a portable player

    Hi, I have a MacBook Air.  I want to capture the audio out (3.5mm jack) from an old SONY minidisk recorder into the Air.  I tried to plug speakers into the SONY and letting the internal mic capture the speaker sounds, but the quality wasn't crisp.  Can anyone recommend  a direct way (presumably thru USB) that ensures better quality?  Thanks.
    BTW, the contents I am capturing are voice journals on mini-disc my grand father had recorded since the mid-90's before he pass recently.

    Take a look at the Griffen iMic. I have used it to capture audio from a portable cassette player. I used iTunes to store the tracks.

  • Getting music from Real One player

    Does anyone know how to get music from real one player into the ipod? I am an idiot when it comes to techy stuff, so now i've got a new nano, but I don't know how to extract music from realone player. I tried add file to library option, but that didn't work...
    anybody with ideas? thanks so much!!!

    Your iPod cannot play a Real-format file, nor can iTunes, so you'll have to convert it. There are no tools for Mac I know of that can directly convert a Real track, so you'll need to capture the output of Real Player using a utility such as Audio Hijack or Wiretap. Either of those utilities can save the captured audio in a format that iTunes can import and transfer to your iPod.
    Hope this helps.

  • FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ? Any solution * Advance Thanks

    FCP 10.1 DV capturing from camera breaking the scenes into unwanted clips by flashing a black screen on import window. But its fine and accurate with adobe premiere pro cc ?
    Any solution * Advance Thanks

    FCP X will import into separate clips every time it detects a scene change (as when you stopped and started recording in the camera). There is no option to avoid this, as far as I known.
    You may try importing from camera using Quicktime Player X and then bringing the imported file into FCP X.

  • Capturing bad DV/DVCAM tape

    I asked a similar question a while back, but the jury seems to be out on it all.
    I get this - http://i.imgur.com/LUNwCTm.jpg - a lot when capturing bad DV/DVCAM/HDV footage via firewire into FCP 7.
    I know that I can change the user preferences to warn after capture or make new clip. It doesn't matter. FCP stops the capture process all together and makes me restart the capture now with a new clip. I've tried capture now, clip capture, capture with non-controllable device, ect. - none of them work for my situations.
    I think the only answer is to re-record the footage to a second DV deck, or use some 3rd party capture software that will allow me to capture across the breaks. Any recommendations? I'm about to try iMovie to see if it'll take it. I found sometimes it's not a picky as FCP.
    Thanks,
    Jarrod

    jarrodmakesvideos wrote:
    I think the only answer is to re-record the footage to a second DV deck, or use some 3rd party capture software that will allow me to capture across the breaks. Any recommendations? I'm about to try iMovie to see if it'll take it. I found sometimes it's not a picky as FCP.
    Thanks,
    Jarrod
    The only thing you didn't mention is cleaning the playback device heads.
    If you are dealing with just DV/DVCPro, you may want to try using LiveCapturePlus (if I remember correctly) from Squarebox. I'm not sure if it runs on current versions of OSX but I found it very useful back in the DV day.
    If you go the Dub route, make sure you start the RECORDING deck first so it begins to laydown new timecode before the incoming signal is detected. This way the old tape TC will be ignored. If you send the signal to the recording deck before starting to record, the recording deck will simply accept the incoming TC and you do not address the problem.
    Good luck.
    x

Maybe you are looking for