Capturing from the JVCGY100U Camera

Format is HDV30P
Camera( aka capture devise) is JVC GY 100U
I am on FCP 5.1.4
I am trying to capture a clip. The capture breaks up the logged clip into multiple clips and they have about 8 seconds that is not captured between the breaks.
I a know that the camera was not turned off during the shoot or stopped. My setting are set to "capture through timecode breaks" and I have also tried using the "make new clip on timecode break" setting. I am using the HDV capture preset.
Any advise?
THANKS!

I posted this a while ago but I was capturing from a camera. I am now captuing from a JVC Deck (BRHD50).
Still, as I capture FCP makes a new clip and I lose about 6 seconds. This happens A LOT.
The media that is not captured IS on my tape. I can hear it from the deck.
The media was not at the beginning of a take and is a lot of time it is in mid-sentence.
As of my last posting I leaned that you lose about 8 seconds each time you press play on the JVC100U camera. That I get. But this is at places that are in the middle of a take. My setting are set to "capture through timecode breaks" and I have also tried using the "make new clip on timecode break" setting. I am using the HDV capture preset.
PLEASE HELP or I will have to re-shoot the interviews.

Similar Messages

HT1338 why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

why I can't do capture from the camera in final cut pro x?

Final Cut Express won't allow me to capture from my vdo camera

I just loaded Final Cut Express HD on my Mac because I wanted to upgrade from IMOVIE. My Powerbook G4 had no problem capturing video with my Sony HDV 1080i video camera. But I can't get Final Cut Express HD to locate my camera at all no matter what "easy setup" setting I choose. But if I turn on IMOVIE, the program can capture from my video camera no problem. I know the firewire cable is hooked to the computer correctly & the camera is on & in the VTR mode. If anyone can help me identify this problem, I'd really appreciate it because I'm trying to begin a new video project & can't if I can't capture video. Thanks for helping.

Fritz from Technical support told me about a glitch in Final Cut Pro & Express HD that happens when you upgrade to Quicktime 7. He told me to go to this article: Link: http://www.info.apple.com/kbnum/n301852
and follow the instructions & it would fix my problem. It didn't & then of course I called tech support back & it was after hours. I still can't capture from my video camera but it works in IMOVIE. I removed Final Cut Express HD from my computer (even all the files in library/users, etc.) and then reinstalled it. It still gives me the same error even though I have my camera plugged in & turned on. It says unable to locate capture device. This is unbelievable. Hopefully I can get some help. Brian

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the pastiPhoto cannot import your photos because there was a problem downloading an image.

When trying to upload pictures from my camera I get this message although I have uploaded from the same camera in the past, "iPhoto cannot import your photos because there was a problem downloading an image."

Can you access the images with Image Capture (in your Applications Folder) ?

How do I convert a VLC file to imovie. I have managed to download the mini dvd disc from the video camera onto a USB and have saved the file on my desktop but have no clue how to get it into iMovie so I can edit and send via email. Any ideas!!!

How do I convert a VLC file to iMovie.
I've managed to download the mini dvd from the video camera onto a USB and have save onto my Desktop.
But have no idea how to convert to iMovie so I can edit and attach video to an email and Facebook.

Edit WMV
http://www.microsoft.com/windowsxp/using/moviemaker/getstarted/default.mspx
and http://www.microsoft.com/windows/windowsmedia/forpros/encoder/default.mspx
Also... I have NOT used those products, I only forward due to other mentions
Convert http://premierepro.wikia.com/wiki/FAQ:How_do_I_convert_my_files%3F
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
$99 http://www.corel.com/servlet/Satellite/us/en/Product/1175714228541#tabview=tab0
$99 http://www.womble.com/products/mvw.html
$80 http://www.nchsoftware.com/prism/index.html
$75 http://www.videoredo.com/en/index.htm
$75 http://www.magix.com/us/movie-edit-pro/
$70 http://www.nchsoftware.com/prism/index.html Converter
$40 http://www.daniusoft.com/dvd-ripper.html#135
$40 http://www.deskshare.com/dmc.aspx Digital Media Converter
$00 http://www.squared5.com/ MPEG Streamclip Converter
$00 http://www.erightsoft.com/SUPER.html Multi-Converter
$00 http://www.virtualdub.org/ Mpeg to AVI Converter

How could I play and transmit a stream from the same camera

How could I play and transmit a stream from the same camera?

Hi,
As I said, you can use the method getVisualComponent() of the Processor to get a preview Window.
You create a Processor, prepare it to generate an appropriate output DataSource for what you want to do (saving, TXing, etc).
Then, for this Processor you extract an AWT Component where the stream will be previewed using the method getVisualComponent().
Some of the player examples in the JMF guide use this technique. I'm still not write my own player. I'm using an adaptation of the RTPPlayer, but I'm planning to use the above technique to create a Player where I can apply some effects to the stream and then save it if the user wants to.
If someone already did that, please, correct me if my procedure isn't right!
By the way, thanks for your help! I was using the DataSource returned from Manager.createCloneableDataSource only to create the clones. I was feeding my main Processor with the original DataSource. That was the problem!
RGB

Changed sequence settings to match source footage but only half footage now matches even though they're from the same camera and same aspect ratio

My source footage is 1920 X 1080 from a canon 60D. I changed my sequence settings to Digital SLR 1920 X 1080 to match. On the program window I have it set at "Fit". Only about a quarter of my footage now fits the program screen and looks to be the matching aspect ratio. The rest of the footage when on "fit" fills a tiny portion of the viewing window so it appears they don't match the sequence settings. I don't understand why this is happening because this footage is from the same camera, shot the same day, and have the same aspect ratios.
Can anyone tell me why this is happening and how I can fix it??

First of all, the setting that you mention is on Fit is the Zoom Level of the Program Monitor. It controls only how the sequence is shown in that monitor; it has nothing to do with how any sources are handled in the sequence.
Please provide the following information:
Exact version of Premiere Pro
Exact version of operating system
Graphics card and driver
Also, please post a screenshot showing the following
Project panel with the Video Info column visible
the Timeline visible
one of the problematic clips selected and the Effect Controls panel visible, with the Motion section twirled open.

Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

Have you tried restarting or resetting your iPhone?
Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

My camera will not flip from the rear camera to the front. It is the iPhone 5 and I got the ios7. Is there anything I can do

My camera will not flip from the rear camera to the front. It is the iPhone 5 and I got the ios7. Is there anything I can do?

Thank you fablepd,
I tried downloading “Awesome camera”. Seems like a nice App. The front/back switch does not work within that App.
Switching to back camera in the normal Camera App brings up a blurred picture of what the back camera is seeing and freezes the app. Force quitting Camera App does not bring it back to live until after a long time. Problem still persists.
iPhone 5 64GB, iOS 7.0.6.

How do I mute the sound from the video camera when burning a DVD

Hi there. I'm a new user of Elements 8. I have compiled some clips and added a soundtrack to the movie, When you preview the file you don't hear the sound from the video camera but when I burn it to a DVD you still hear the video background. How do I burn the DVD without the background sound from the video camera? On the DVD I only want to hear the soundtrack I added.
Thank you,
Doug

Thanks guys. Both options worked. Dowside to deleting audio (option I went with) appears to be that you lose the audio forever. So if I ever wanted to bring the audio back I wouldn't be able to.
You are partially correct in that the Audio is no longer on your Timeline. It is still in your Project Panel, and you can move it back to your Timeline if ever needed. The complete removal from the Timeline is why I work with the Audio Mixer in cases like this. Also, on could alter the Gain on a Clip by Clip basis.
With using the audio mixer it appeared I had to mute each clip separately. When I highlighted all the clips and selected mute for audio 1 it wouldn't mute all of the selected clips.
The Audio Mixer works at the Track-level, and not at the Clip-level. That is why I use it so often - one click, or slider adjustment affects the entire chosen Track. If it did not work at a Track-level for you, something is wrong. Now, if one has Clips on different Tracks, then Muting of all of those would be required, or one would have address things on a Clip-level basis.
Any way to use the audio mixer to mute the clips in mass?
See above for how it should work, and also the exceptions - Audio on several Audio Tracks.
Good luck, and remember that your Audio still resides in the Project Panel, should you ever need it again.
Hunt

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

What is a good video converter for iMac? Premiere 6 will not capture from the Canon VIXIA HF G20.

Rather than convert, you'd be better off capturing with a more current version of the program -- one that supports AVCHD video. Otherwise, you're in for a lot of headache. A converter isn't going to solve your problems.
BTW, when you say Premiere 6, do you mean Premiere 6 -- which is over 10 years old? (There was no Premiere Elements 6.)
Trust me on this: Capture with a Mac version of Premiere Elements 11 or 12 and your video will be perfectly compatible with any Mac program.

After iOS 8, no sound when playing video taken from the back camera..

I have an iPhone 5, everything was fine before the update, but after ios 8, when i record a video from the back camera only, it plays no sound. The front camera works fine, sound and picture are perfect during playback, back camera just picture, no sound.. Anyone else have a similar issue?

We are discussing this over here: iPhone 6 video recording without sound.

Unable to capture from Sony HDFX1 camera

Built a new PC and utilized a top end ATI Radeon dual video card. Running Vista Ultra OS(hmmmm), plenty ram, processor, etc.
PC does not see my camera when I plug in for capture. Do I need a special codec or 1394 HD drivers available for HD capture from ATI or from Adobe perhaps?
Frustrated

If the Vista install was a standard installation, Vista should recognize the camera automatically and install the correct drivers. Nothing you need to do. Make sure that you connect the firewire cable first between the camera and the on-board firewire connector. Do not try to connect it to the ATI card. Once the cable is connected, turn on the power on the camera and set it to VCR. Vista will then install the necessary drivers automatically and if they have been installed previously, show the autoplay box. Make sure that the menu in the camera is correctly setup to use the iLink connection and the format you shot in, so either DV or HDV. Consult the Sony manual for that. If the does not work, try a different cable first.

Final Cut won't capture from the DVX100b? How do you remove 2323 pulldown?

I connected the DVX to Final Cut and loaded Log and Capture. When I click capture Now, the black final cut screen just hangs and it maintains saying "waiting for timecode ... must be in vtr mode" The camera is in VCR mode. I'm able to look through the tape from the Log and Capture screen but it just hangs when told to actually capture?
Also, I have footage in regular 24p mode, but I don't see an option to capture and remove 2323 pulldown, only 2332 which is only for 24pA?
Thanks!

If you want to mix 24P and 60i in a timeline, DO NOT remove pulldown. 24P with a pulldown plays nicely with 60i. Straight 24fps won't go into a 60i timeline without smearing or adding a pulldown. 60i won't go into a 24fps timeline without mushing the frames together. Not pretty...
Patrick

FCE will not recognise or capture from AC-DVC30E camera!

Hello,
I am trying to capture footage (DV-PAL 48k anamorphic) from a Pan AC-DVC30E camera into Final Cut Express, but a message appears unable to locate device. I have tried every DV setting available and bought a new firewire cable to check it wasn't the firewire connection. Any ideas?
Thank you.

thank you for the quick response David. It is set to VCR and AV in/out settings in the camera are set to DV Out - 'On'.
I have attempted to capture with the camera plugged into a power source - unfortunately this hasn't helped.
I must be missing something, just cannot work it out!

Capturing from the JVCGY100U Camera

Similar Messages

Maybe you are looking for