Capturing HD in final cut express

A few capture questions:
1. Is there a way to capture HD material in final cut express?
2. If I'm sending HD material through a digital converter, and then to the computer, will that digital computer all the file to be transfered in HD?
thank you.

From what version up can final cut express capture HD?
question 2: I'm running material from a BetaHD deck, but it doesnt have a fire wire connection, so i'm connecting video and audio cables to a digital converter which is connected to the computer via fire-wire. Does the HD signal maintain over this transfer?

Similar Messages

Trouble capturing footage to final cut express

hey this is quite urgent....
i am trying to upload footage to final cut express from my sony DCR-HC52E. it sais VTR OK and plays and pauses and stuff but i cannot see anything it just stayed on those coloured bars.
i can see it playing on the camera though...
i got it working once with this camera, just cant remember how
any help would be greatly appreciated!

Hi
My table for this was once for iMovie - BUT it's more General than that so You might find help here.
*NO CAMERA or A/D-box*
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable *very often the problem maker*.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref. Play-back via Camera (on<->off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing eg NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
*Other ways to import Your miniDV tape*
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choise / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
*No Camera or bad import*
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that halps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odwenGB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Capturing Photos onto Final Cut Express

Where my Emac is not connected to the Internet, how do I capture photos to put into a Final Cut Express project?

You import photos into FCE, not capture them. (File > Import)
It's not necessary for your Mac (eMac or otherwise) to be connected to the internet unless you are trying to download photos from a website. Is that what you want to do?

Capturing video on final cut express

I have connected my sony camera to my macbook computer and opened up final cut express
HD. It shows that my camera is indeed connected. I go up to file and click capture and the capture window opens. I click on capture now and my camera starts up and a black screen appears but nothing happens. When I hit escape, I return to the capture window and my movie is playing in the display window but nothing is being captured. What am i doing wrong?

Well one of the first things you're doing wrong is posting your FCE question in the FCP forum
http://discussions.apple.com/forum.jspa?forumID=936
I don't use FCE, so I'm not sure how its operation differs from FCP in this regard, but my guess is that you have not switched your camera to VTR mode and so what you may be seeing in the capture window is the back of the lens cap.

Capturing analog into Final Cut Express HD

I'm new to Apple. I transferred analog video onto DVD and tried to download it into my MacPro using both Imovie and Final Cut Express HD to edit. I can do this easily on my Dell but can't on my Apple with either program. Any answers?

Buy an A-D Converter for $200 or more. If your camcorder has AV IN you can use that.
Otherwise download Streamclip free and use that to convert to DV:-
http://www.squared5.com/
Ian.

Capturing HD into Final Cut Express HD

I think i posted a topic about this some time back, but i thought i would again. i have this JVC HD camera, and i would like to import the video into FCEHD. but i was having a lot of trouble with it. i spoke to a JVC sales rep awhile back, and he said there was something i needed to download in order to do it. i called him yesterday, and he hasn't returned my phone call yet. i just thought i'd post a topic on here to see if anybody knew what he was talking about. if anyone could let me know what exactly i need to do in order to import this video, i'd really appreciate it.
hey, thanks.

After my previous post to your thread, my computer quit working properly and I deleted and reinstalled both QT 7.0.3 and FCE-HD. I now am able to capture HD footage with the camera set to HD (on lens barrell) and mpeg2 set on the firewire output switch. FCE easy setup is apple intermediate 1080i/60. I have to unplug then replug the firewire cable on the camera and rolling tape before going to capture. I can also capture SD video with all the exact same settings, but am not sure exactly what form it's going onto the computer in! DV video is via ntsc-dv codec and camera set to dv/dv.
Best regards, Manson

Rendering a jpeg image in Final Cut Express

I have a jpeg image which shows up correctly in the captured bin of Final Cut Express once it is imported, but it will not render properly. The background is black in the viewer, and the image(jpeg) in the center of the screen is a bright green square.
Im able to add motion to the image, but it does not show up in the viewer as the image, it is only a green square.
Can this be fixed in FCE?
The original file is from an email, probably from a pc, does this cause compatibitity issues?

If you have access to an image editing tool such as photoshop, I would advice you import the image into Phototshop and save it in a different format e.g, GIF format and re-import it into Final Cut Express HD. This could solve your rendering problem if all you need is to use a Still image.
Ayemenre

Final Cut Express won't allow me to capture from my vdo camera

I just loaded Final Cut Express HD on my Mac because I wanted to upgrade from IMOVIE. My Powerbook G4 had no problem capturing video with my Sony HDV 1080i video camera. But I can't get Final Cut Express HD to locate my camera at all no matter what "easy setup" setting I choose. But if I turn on IMOVIE, the program can capture from my video camera no problem. I know the firewire cable is hooked to the computer correctly & the camera is on & in the VTR mode. If anyone can help me identify this problem, I'd really appreciate it because I'm trying to begin a new video project & can't if I can't capture video. Thanks for helping.

Fritz from Technical support told me about a glitch in Final Cut Pro & Express HD that happens when you upgrade to Quicktime 7. He told me to go to this article: Link: http://www.info.apple.com/kbnum/n301852
and follow the instructions & it would fix my problem. It didn't & then of course I called tech support back & it was after hours. I still can't capture from my video camera but it works in IMOVIE. I removed Final Cut Express HD from my computer (even all the files in library/users, etc.) and then reinstalled it. It still gives me the same error even though I have my camera plugged in & turned on. It says unable to locate capture device. This is unbelievable. Hopefully I can get some help. Brian

Final cut Express unable to capture

My Final Cut Express wont initialize my deck. A dialog box comes up saying so. one site suggest deleting quicktime receipts in my library folder on my mac, that quicktime needs to be reinstalled, then i should be able to get my canon HV20 video camera to communicate with FCE 4 and start capturing. has anyone heard of resolving my "unable to initialize video deck" issue this way? Any ideas how to get my HV20 and FCP to communicate to eachother?

There is a separate forum for FCE.
Make sure you are using the correct HDV settings in FCE and that the camera is set to output HDV and not downconvert.

Final Cut Express won't capture audio with the video anymore, why?

I have used Final Cut Express 4 for over a year now with no problems, but recently I am unable to capture any audio with the video from my camera. I can do it through iMovie no problem. I can't figure out if I changed a setting by accident because everything looks normal to me. Could another program be interfering with this? Quicktime Pro? I have no idea how to fix this.

First of all, we need a bunch of information in order to help. Please provide the specs of the footage and the sequence you are using. Also, are you using DV, HDV, or AVCHD? Do you hear audio when the clip is played in the viewer, or is there no audio at all once the clip is captured/ingested?

Panasonic HDC-SD100 media card unable to capture on Final Cut Express 4

No problems at all with transfer to i-movie but just purchased final cut express 4 and problems with capturing from the media card. Signal system on camera is 1080/50i. Have tried setting HD and 1080/50i in the easy set up but no joy. Have tried log and transfer and see clips but on transfer message states no data. Can anyone help with the settings please?
Many thanks in advance

Welcome to the forum!
There are many things that could cause this, and almost all have been discussed.
Some things to try:
• In the Log and Transfer window, click the preferences button (the gear in the upper right). Make sure audio is set to *Plain Stereo*
• Also in that preferences window, click the button to *Clear the Cache*
Also, what drive are you using to capture to (internal or external)? How is it formatted, and how much space is left on that drive?

Final Cut Express: No audio when capturing from camcorder

When capturing video from my "Sony TRV 18" digital camcorder and a Canon ZR500 digital camcorder
into Final Cut Express 4.0.1 via fire wire to my scratch disk - a LaCie external hard drive -
I get the video in my browser but it has no accompanying audio.
When I move a captured clip from the browser to the viewer and time line, the video shows up, but (1) there is no accompanying audio shown in the audio time line, (2) no audio can be heard and (3) the audio meters show no action.
My Easy Setup settings for audio match my camera audio settings.
I've used different firewires between the camera and the scratch disk. Still the same.
This has been a problem for about a month. Everything worked fine before. To make project deadlines, I have worked around this anomaly by capturing clips in IMovie 4 on my older Mac laptop than transferring the media clips to my Final Cut Express scratch disk. That works, but it is time consuming and requires rendering of all the audio.
I use an IMac with OSX 10.6.5 with 266 GHz intel Core i5.
Thank you in advance for any tips that could help.

Hi Sid
I get the video in my browser but it has no accompanying audio.
YES - This is the way FinalCut Express AND Pro works !
If You need the audio - Then You connect a small set of speakers to Your miniDV Camera
(headphone out)
alt. if no phono-out on Camera is to connect a small TV to the Camera analog way
and here You can both see and hear during Capture
(BTW - Connecting a small TV (or if §§§§§ is no problem a reference monitor
§5-10,000 or even more) is a Very good way of keeping Quality control during
editing process. Eg Transitions, audio levels, color fidelity etc. I do and the
ref monitor are well compared to my final DVDs.)
There are NO WAY that You can monitor audio during Capture in any FinalCut versions !
Yours (been there and done that - or as said in Sweden "butted Your head at it") Bengt W

Issues Capturing with Final Cut Express

Hi
I am currently having issues capturing with Final Cut Express. I am using a Firewire 800 gold speed cable 9pin/4pin with my Sony LSF-S58 camera. I use mini DV tapes and usually capture on other computers with no problems. However this time I am using Final Cut Express version 4.0.1 along with a Thunderbolt to Firewire adapter so it'll connect with my MAC Book Pro (Operating system OS X 10.6.8). The issue is when I open Final Cut's capture option there is a message at the bottom that says "No Communicatin" I have tried various settings within easy set-up and nothing seems to work as well as browsing this help board along with others looking for the answer. Any help anyone can provide would be great. Thanks.

When I Google LSF-S58, I get a Sony Lens Hood, not a camera. Are you recording in HD or SD?
Have you used the Thunderbolt to Firewire convertor successfully on your computer with other devices?
Have you used the Thunderbolt port successfully with other Thunderbolt devices?
I don't know if this is applicable to your computer, but there is a Thunderbolt software update for 10.6.8 here:
http://support.apple.com/kb/DL1452?viewlocale=en_US&locale=en_US
MtD

Trouble capturing to Final Cut Express HD 3

Upgraded to Leopard last night and also added Final Cut Express HD 3. I have been using Final Cut Express for about 4 years and using my Canon XL1 & GL1 to capture with no problems. After upgrades I hooked up my Canon XHA1 (firewire)
and wanted to capture some HD footage to play with the new stuff.
When I go to capture (using capture screen control buttons), the camera starts and the capture screen stays black for about 5 seconds then stops camera. VTR at bottom of screen is showing connected. I've tried many things with no results. played with camera settings. Need some help.

Do a forum search for QuickTime 7.3. It doesn't work with FCE versions 3.5 or older.

Capturing Footage from Canon HV40 to Final Cut Express Issue

I own a Canon HV40 camcorder and shot a short film using the 24p HDV 24F Cine Mode feature (for film look). I've captured the footage into Final Cut Express, but the footage is running at a faster speed. I know this may have something to do with frames per second in the user preferences section.
Does anyone have the concrete solution to this problem and will I have to recapture my footage under a different setting?
Please advise.
Thank you!
- Eric

Hi Eric,
FCE only supports frame rates of 60i, 30p, 50i, and 25p. To edit 24p footage you'd need Final Cut Pro.

Capturing HD in final cut express

Similar Messages

Maybe you are looking for